Change log-in image

Hi experts i'd like to know the way to change the standard SRM-EBP image of the log-in.
It is via se80 but i don't remember if i've to search into MIME repository or so on...
Can u help me?
thanks
regards
ab

Hello
Choose
SE80
Internet Services
BBPGLOBAL
Mime Objects / Images / Logo.gif
Best Regards,
Daniel

Similar Messages

Delete change log data

I was going through posts regarding delete change-log data but I am bit confused with the answers.My data is moving from ODS to CUBE and for the performance reasons I want to delete Change-log data from PSA and keep only 3 day requests.My question - if I delete Change-log whether it effects the delta data from ODS to CUBE.Change-log maintains images so If I keep only 3 requests there will be images of only those 3 request data.If this happens then it will effect all the delta data going into CUBE
Let me know your suggessions
Rgs,

Hi,
     Yes, you can delete the data from the Change Log unless until you do not need to re-construct the data again from the change log table.
     As a good principle for safety reasons if data is not too large, you can keep the data for 7days. This will ensure us to be safe. If something went wrong on week-end say 2 days were gone and on 3rd day the user has identified and raised a ticket on this. Forth day will be for analyzing and re-construction.
    So, unless until if the data is not too large, you can keep it for 7 days in the Change log table and the rest you can delete. As said by the other members, deletion of Change Log table does not affect the delta as it compares with the Active Table and creates a Before Image and After Images records and updates in the Change Log Table.
Raj

Change log issues-2 images for a single requests

Hi ,
in change log table for a single request i found 2 before images and two after images, is this normal behaviour if not when can we see the such type of scenarios.
because it leads to zero records when it isn updated in to the further data targets.
thanks.

the listener is NOT involved with any existing session.
stopping & restarting the listener has NO impact on existing sessions.
I suggest it is better to control network access to any system using a Firewall which is the best tool for this task.
Yes, it is possible to have more than 1 listener. It is also possible to poke yourself in the eye with a sharp pencil.
I suggest that you should avoid both of these possible activities.
Simply put having multiple listeners is wrong for multiple reasons & should be avoided.

Where to see the images other than change log table

Dear all,
How to view images for extraction's (example Generic ) in DSO without using Change log table.
With Regards,
Baskaran

Hi,
There is no other option other than change log table to view the images.
in PSA..we will get only raw data..i.e...its non other than the data how its posted in source sytem.we can say..this is only copy of source sytem data.
after PSA,if the datasource is DELTA enabled(which can sustain NEW or CHANGED records-here only we get concept of IMAGES),we have to load this data only to DSO.from there after activation of the data,the data can be updated to further data targets only from CHANGE LOG table which can maintain images.
Even further targets are also DSOs,we will have to load from this DSO only.so we can see images only in change log table.
hope this is clear for you.
Regards
Ramsunder

Need suggestion to get data from change log table of ODS.

Hello,
There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
Please let me know if you have any suggestions.
Regards,
Sanjay Chaurasia.

Hi,
You can use the changelog table of the DSO.
Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
In the update rule Routine, give the tech name of Change log table instead of Active table name.
Hope it helps.
Krishna

Some key figures are not being correctly reversed in the Change Log

Hi Experts,
I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
First time the record comes - Change log content:
Material   Valid Dt   Cost Value      Quantity Rec. Mode      Req. ID
1234     May/01   $ 100.00       10          'N'     1
Second time when the record changes the Date:
Material     Date      Cost Value      Quantity Rec. Mode      Req. 1234     May/29   $ 100.00       10          ' '     2
1234     May/01   $ -100.00       10          'X'     2
Then the final result in the cube, after it is compressed, is:
Material     Date      Cost Value      Quantity
1234     May/29   $ 100.00       20
Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
Can anybody help me to figure this out, please?
Thanks in advance.

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences I-Photo. Does anyone know what the problem could be?

I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences>I-Photo. Does anyone know what the problem could be?

Your Desktop Picture settings and Dock items are stored in the files
/Users/your short user name/Library/Preferences/com.apple.desktop.plist and
/Users/your short user name/Library/Preferences/com.apple.dock.plist
in the "Preferences" folder in your user library. This looks like the system has trouble to write to these files. Check the permissions on your user library and remove the above files from your user library, then log off and on again.
Your user library is hidden in Lion and Mt. Lion. To reveal it, use the Finder's "Go" menu. Select "Go" in the Finder's main menu bar and hold down the alt/option key, until you see the "Library" in the drop-down menu. Double click it to open a Finder window, so you can browse the files inside.
Regards
Léonie

How to rebuild the config from the entries in the change logs

Hi,
We have overwritten something vital in the KEDR t.code through a transport. The users have created their own entries in the KEDR t.code directly in the system because this t.code was available for editing although the Client was locked for customizing (option no changes allowed). Not sure why SAP allows KEDR to be edited although the client was locked for customizing. Anyone knows?
Now the problem is how can we restore the entries maintained by the users?
Fortunately this KEDR table is enabled for audit log. Is there a way to actually restore the entries from the change logs? Please advise.

If the device is already in the Prime Infrastructure, you can open it in Device work center and select the device > use the configuration archive option > scheduled deploy.
Also, the Prime Infrastructure Plug and Play feature allows you to perform an initial provisioning of a software image and configuration on a new device. For more details check :
Automating Device Deployment Using Plug and Play Profiles
Working with Device Configurations
-Thanks
Vinod

How to delete HR Infotype Change log

Hi,
I would like to know if there are any means to delete the HR infotype change log. I've already executed the standard program RPUDELPN to delete all the employee records every time an environment is refreshed from the production image, however both the long term and short term infotype change log can still be access. I need to remove those change logs as well to prevent unauthorized access to these confidential data.
Thanks a lot.
Francis

Thanks. However, I'd like to know if I can delete the change documents that were already logged.
My scenario is that in production environment, we have turn on the logging and change documents are already created. Now we have refresh the development environment with the production images, so I've to delete all the employee records as well as the change documents in order to prevent unauthorized access to these confidential information.
The standard program RPUDELPN already delete all the employee records but not the change documents. Where and how can I delete both the long and short term document as well?
Thanks.

ODS Activation Returns 0 records in the Change Log

Hi All,
I have question regarding the Change Log build after the ODS req has been activated.
BW system - SAP NetWeaver BI 7.0 - Level 15
Upon loading a delta request into the ODS and Activating, it adds no records to the change log table.But the active table gets correct records
Checks I Did
ODS -> Menu-> Environment -> Delete Change Log Data.
     No job scheduled or runing to delete the change log reqs (sm37)
RSRV - Check the Status of the Generated Program of a Data Store Object
ODS - reactivation to see if it works..
ODS Manage - Auto Req Processing set Quality status, Activate DSO to Yes.
The Activation Log shows at the end that they were no changed records added:
Data pkgs 000001; Added records 0; Changed records 0; Deleted records 0
Log for activation request ODSR_4APQQHKM459YNO7CIGCE0629U data package 000001...000001
Activation of records from DataStore object C_PUR_C sucessfully finished
U table for DataStore object C_PUR_C deleted successfully
Job finished
Can anyone help on the above issue??
Thanks
Rao

Hello Siggi,
Referring to the previous post:
I have a situation where few documents are not transferred to Change log during DSO Activation, though the After image values of these records are reflected in Active table.
I have found one common pattern for those documents which are not recorded in Change Log.
They have two pairs of After and Before image records.
First Pair like this: Eg: Overall status as the only data field.
Sales Doc     Overall Statuls   Recordmode
1001             C                      X
1001             A
Second pair:
1001            A                      X
1001            C
If we consolidate all these 4 records there seems to be no change for any data fields. Should I consider this as the standard behaviour while activating DSO - causing these records not to get recorded in change log?
Or is there any SAP Note that can make sure the change log gets populated in such case.
Hope my details are clear to you..
- Varma

Change log table

Hi gurus
In my start rotine how do i use change log table for e.g i want to delete the records where RECORDMODE ='x' HOW can i reference change log table.because when i use the start routine is it only good for active table? becasue all the changed i m getting in changelog table and my dtp i m extracting data from changelog table but i want to delete data from that table how do i refer.
thanks

recordmode is a part of your source_package as well as result_package.
hence you can access it is start routine also.
you can delete the source package where recordmode = 'X'.
but doing so it may result inconsistency in your change log table.
the only concern is be sure what you want to achieve as 'X' is before image ( i.e reverse of new image loaded earlier).

Changing the Fish image FDM

Hi all,
My client wants to know if the fish shown on the workflow process in FDM can be changed for another animal, they want a lizard ...
Any help would be highly appreciated

There are some "out of the box" substitutions they can make.
Log into HFM, go to Administrator, Web Settings, 'Default Status Bar Icons:' - There area few different options.
If you want something more specific, you can manually change out the image files.
Look in <Install Drive>:<HYPERION HOME>\FDM\WebServerComponents\Website\StatusBarIcons
then choose the folder that corresponds to your Theme (probably Default)
- ButtonFish
- Default
- Hyperion
Image you will want to focus on would be :
PerformNextProcess.gif
PerformFailed.gif
ProcessSucceeded.gif
If you replace these, be sure to replace with images of the same size to ensure you don't screw up the HTML layout.

Change Logs for TCODE -- FILE

Hi Friends,
    Please help me in finding the change logs for the TCODE FILE,
    i.e The changes made to the Logical paths
   I had tried Utilities---->change logs , but unfortunately i cannot find any changes logs
   But there are changes made to the logical paths in my system but i cannot see them in change logs
thanks
chandrasekhar j

rec/client is a profile parameter, you can view the settings in transaction RZ10. However I find program RSPARAM more useful, the report lists all system parameters with their default and altered value. Also if you double-click on a parameter you can get to the full help text for its meaning.
The parameter essentially switches on table change logging for configuration tables (based on the technical settings of the table) and has to be set before the changes are made.
Hope this helps.
Nick

Change Log Data from DSO to CUBE

Hi Experts,
Is it possible to load/transfer change log data as well from DSO to Cube
Thanks

Hi,
Yes it is possible.
Create a DTP from DSO to cube.
In the extraction tab of DTP choose the option
Datasource Change log
Hope it Helps!!
Reward if useful
Manish

Filled fields become blank in DSO change log

Hi experts,
I find an unusual behavior in DSO activation.
For some records for which I find in PSA, new data table (and in debug also!!!) correct data, when the request is activated I find in change log table all characteristic fields empty; the key fields and key figure fields are ok and correct in all tables.
It happen randomly for some orders and for a few requests.
It happen when I have one storno record, for example:
PSA (order, item, customer, material, storno, quantity)
10000, 10, AAA, YYY, , 25
10000, 10, AAA, YYY, X, -25
DEBUG (order, item, customer, material, storno, quantity)
10000, 10, AAA, YYY, , 25
10000, 10, AAA, YYY, X, -25
CHANGE LOG (order, item, customer, material, storno, quantity)
10000, 10, AAA, YYY, , 25
10000, 10, , , X, -25
ACTIVE DATA (order, item, customer, material, storno, quantity)
10000, 10, AAA, YYY, 25
In some other cases:
ACTIVE DATA (order, item, customer, material, storno, quantity)
10000, 10, , , -25
Have you some ideas? It is very strange.
We are on a 7.0 BW system, but with 3.5 data flow (update rule).
Thanks in advance.

Vito,
This happens some times...
1. Did you transport any change to this DSO where characteristics were added and are these the ones that are blank...
When this happens - see if you can clear the change log ( if this is an option ) and then reactivate the cube.
Also there is a program to regenerate the activation program, I am not able to locate this - but then usually reactivating the ODS will usually clear this issue because it regenerates the activation program.

Change log-in image

Similar Messages

Maybe you are looking for