Change Log / List for Org model

Dear All,
We are facing unknown changes in Org model every now and then. How can we trace out the change log or Change list for changes done in PPOMA_CRM transaction?
Help me if some notes are there in this regard. I am unable to find any from my side.
Regards,
Rajesh

closing the question as no responses were there

Similar Messages

Lenovo G50-45 why is no USB 3.0 driver listed for this model

I started a clean boot of Windows 7 x64 from USB as I'm not a fan of Windows 8 but since installing I've been unable to get the USB 3.0 port to recognize anything I plug in (was working fine before).
I can't see a USB 3.0 driver listed on the support page for this model:
https://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-45-notebo...
I've also read similar problems have occured on other manufacturers laptops and this was fixed by installing the chipset drivers etc in the correct order.
Is there a correct order I should adhere to?
Any help much appreciated

I am having the exact same issue on my 2013 MBPr.
I have two Seagate GoFlex USB 3.0s, one plugged into the regular 3.0 port (450MB/s) on the left and the other plugged into the high-speed (5GB/s) 3.0 port on the right. When doing a simple copy/paste from the one drive to the other, I observe the following speeds:
Peak Read (USB 3.0): 36.2Mb/s (288Mbit/s)
Peak Write (USB-HS 3.0): 48.7Mb/s (384Mbit/s)
This is far below the 620MB/s for 3.0 and is more around the 35MB/s USB 2.0 standard.
So, I'm likely to agree with the original compaintant that the 3.0 standards aren't being employed by the MacOSX USB drivers and I'd hope to see a fix soon for these issues lest people start moving off of the Mac platforms to other vendors who adhere to industry guidelines.

Change logs missing for OB52

Hi Experts
We have a peculiar problem where change logs are missing for some of the transactions made through OB52 for modifying FI posting periods.
I vefired that change logging has been correctly activated for table T001B. Though change logs are displayed for most of the transactions through SCU3 or in table DBTABLOG, logs will be missing for some records.
Can you please let us know what could be the possible scenarios where change logs are not recorded for OB52 or table T001B even though logging has been activated.
Any inputs on this will be very helpful.
Regards,
Santosh

try log on tcode S_ALR_87003642

Number range for org model

Hi,
Can i give the BP number range as external for the org units created in org model, so that i can give an external number while creating the org unit in the org model.
thanks,
Sarat.

Hi Sarat,
Any Org unit created in the Org model will be created as BP and you can give the number range.
What i suggest is go to best practises in help.sap.com and select C02_BB_Configurationguide_en and this has the details how you can give the number range and grouping.
Thanks and reward points if helpful
Srini

Change Log activation for Work Orders

Hi all... i am a newcomer to this community. I have heard a lot about it & would like to utilise this platform for learning & knowledge sharing experience.
Well, I wanted to activate Change LOG for tracking changes made to Maintenance work orders.
I have tried it thru' SPRO
Plant Maintenance & Customer Service / Maintenance & Service Processing / Maintenance & Service Orders / Functions & Setings for Orders / Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
I have ticked on the order types defined for my plant... without success.
Any other way to try this out ?
Thanking u in anticipation.
With Warm Regards...

Anand:
Unfurtunatly, not all the modification are registered in the log. For ei., You can track the systema status modification, the PR generation, etc. What fields change are you trying to modify?
Hope this help
Ezequiel

Change log table for Vendor Bidder information?

Hi,
In BBPMAININT transaction we have BIDDER DATA tab.
If we change any Classification data in BIDDER DATA tab for the Vendor in which table it updates the change log information?
I checked in BBP_SUPP_MONI table this table updates only when we change any Company data information for the vendor not Bidder tab.
can any one help me?
Thanks.

Hi
There is no standard report.
But you can check in CDHDR & CDPOS tables for change log.
Object Class= BUPA_BBP0020
Tabname=BBPM_BUT_FRG0021
Best regards
Ramki

Need of Change log deletion for a DSO, when DTP delta Init with Active Tabl

Hi,
Thanks for your time, please help me with the following
Scenario: I have Cube1 being updated from DSO1 with DTP delta, for quite some time. As per new requirement, I would need to create new data mart such that Cube2 gets updated from DSO1.
In order to Configure the delta, I am Considering Following options, please let me know, which one is right one.
Note: DSO1 is in Overwrite Mode.
Create one DTP with update Mode "Delta" , and "Active Table". I knew Delta Changes are captured in change log, but my understanding is, when you execute the DTP for the First time, it fetches the records from Active Table. And from 2nd Run onwards the very "same DTP" without "any changes" get the records from change log, even if we choose "Active Table".
is my understanding is Right?
Do I have to consider deleting the change log, because DSO1 is in Production from quite some time which is in Overwrite mode?
Do I have to create a DTP with Delta and Active Table, run the dtp Once(Init), then choose "Change Log for subsequent runs explicitly
please help me with these. I have reviewed many sap help articles and sdn threads but none of them were helpful. all of them explains, difference b/w active table and change log table, also gives scenarios like use a full DTP and then 2nd DTP with Delta without Data transfer. I am not looking for that kind of details.
Appreciate any help, Thanks again
Edited by: curious maven on Mar 28, 2011 8:35 AM

Hi Uma,
Thanks for your response.
to your question, If I need to load all the data from DSO1 to Cube1, answer is NO. if you read my post once again,
Existing Flow is : DSO1 --> Cube1 (Means, Active Table and Change Logs of DSO1 already Filled Up)
Requirement is: DSO1 --> Cube2. (Need to Init the Delta, and Detlas going forward)
My Questions:
(1) Imagine, DSO1 has 10 requests, so we see resepctive data in Active Table as well as Change Log. As a matter of fact, Data is being updated to DSO1 in Overwrite Mode, so all the changes(10 requests equivalent) would be captured in Change Log, which in turn helpful / used when we do Delta from DSO1 to any Cube, in my case, it used to update to Cube1. As per new requirement, it needs to update to Cube2.
My assumption is, if I choose "Active table and Delta in Extraction Tab" in DTP, During First Run (Delta Init), Data would be fethed from Active table. And the 2nd Run Onwards, delta records would be fetehced from Change Log automatically, even if we don't change the selection from Active Table to Change Log.
Is My Assumption Right?,
in this process, Do I have to Delete Change Log
(2) Do I have to Explicitly change DTP setting from "Active Table to Change Log" Once Delta Init has been run with setting "Active table" inorder to get Deltas from DSO1 --> Cube2 ?
Appreciate your help
Edited by: curious maven on Mar 30, 2011 3:14 PM
Edited by: curious maven on Mar 30, 2011 3:29 PM

Tables for ORG model

Hi friends
Could any one please tell me the table names which stores the ORG model and position and Job.
Earlier reply would be appreciated
Thanks in advance
Rao

In three steps you can retrieve the BP number(s) related to an Org. Model position.
[1]
Positions are registered in HRP1000:
OTYPE = 'S' (Position)
STEXT : description
[2]
Relations between position and persons are registered in HRP1001:
OTYPE = 'S' (Position)
OBJID = HRP1000-OBJID
SOBID : link to person-ID
[3]
Relations between persons and BP numbers are gistered in HRP1000:
OTYPE = 'CP' (Person)
OBJID = HRP1001-SOBID
SHORT : BP number
STEXT : First and Last name of Person

Change Log Details for the Planning Profiles in CRM

Hi All,
We are getting the Planning data from CRM Planning Profiles into BW BPS - 0CRM_C01 Real Time InfoCube.
The Users got a new requirement and they need the following additional details:
1. User who modified the amount in a particular Planning Profile.
2. Date and Time when the Planning Amount has been modified.
3. Differential Amount. (Between Earlier Planning Amount and Planning Amount that was entered now)
In one statement, User needs all the change log details in Planning Amount to be flown to BW and saved so that he can report.
How to create this setup.?
Can the same Real Time InfoCube 0CRM_C01 be used to save this information ?
How to configure the system in Planning Layouts to capture User/Time Stamp/Amount Details.
Any inputs in this regarding will be greatly appreciated.
Regards
RY

Hi Kumar,
Upload com.sap.logon.runtime.par(logon page .par file) into the portal.
problem will be solved..
regards
Nizam

Change Vendor List for a particular period

Hi All,
How do I find out vendors list which will contain vendors who have had changes made to them within a particular period.
Thanking you in advance.
Regards
Prakash

Hi
There is no report available for this. Display changes you can find out for each vendor by XK04 transaction code.
Otherwise you may develop simple report. Changes are stored in Cdhdr and CDPOS.
Purchase Table start with E.
regards
Srinivas

Change log level for exit activity in BPEL

Hi,
Everytime my BPEL process reaches an exit activity it throws a WARNING log message saying:
"The process instance has been terminated because an exit activity was encountered."
This is not an error and should therefor not be logged at WARNING level. How do I change it to be INFO or any other level?

In terms of access, I believe the audit files generated from the agent are created with full access to the entire portal, and I don't believe there is a way to restrict it to certain section apart from doing manipulation on the .log files that are exported.
The process of creating the archiving agent involves going into the Audit Manager utility from the Admin section, and then you'll see it in the middle of the Main Settings page.
I hope that helps.
user5817265 wrote:
Thanks Geoff. I knew I overlooked something simple.
Is the owner the person who created the archive file? What controls who creates it?

Business Partner Number for Org Model

Hi Experts
When we are maintain a Sales org Business Partner Number will automatically generated how it will generating let me what are the customizations for that
I have one scenario
Ex: I am taking number range from 10000 to 99999
We created 99999 customers now we want to maintain anther 10000 customers so how should is increase the number range in system 10000 to 99999 only available so how should I will maintain
Please tell me
I will be very happy to reward points.
Thanks and Regards
Kumar
Edited by: Kumar on Sep 24, 2008 12:48 PM

Hi,
The integration settings are maintained in the below path
Img -> Customer Relationship Management -> Master Data -> Business Partner -> Integration Business Partner-Organization Management -> Set Up Integration with Organizational Management
hopes this answers your query.
Regards
Vinod

Need authorisation list for BW modelling ,extraction and reporting

Hi all gurus,
I am about to work in an BI implementation project and I need a list of Authorizations that I have to submitt to the basis people.
Can anyone help me out with this.
Thanks in advance,
VM.

Hi,
Please go through the links below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ded59342-0a01-0010-da92-f6b72d98f144
http://help.sap.com/saphelp_nw04s/helpdata/en/26/fd8b41b5b3b45fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/authorisations%2bfaq
/people/kristoffer.engh2/blog/2007/04/03/roles-and-authorizations
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a682de07211d2acb80000e829fbfe/frameset.htm
Regards.

Change log for Distribution model and partner profile

Hello All,
Could any one please suggest how to get teh change log of the distribution model and partner profiles in SAP.
Thank you!
Arvind

Hello,
The documentation says what distribution model is used for. My question is can we have change log for any change in the distribution model like user, time and date.
In production system if distribution model and partner profiles are changed by someone to a destination which should not be used, then how can we trace who has changed it.
I hope I am able to explain.
Arvind

Changing The Validity Dates In Org Model in CRM- User Level

Hi
How can we restrict the Validity Dates in Organisation Structure at User Level.
I need that the user should be given some specific dates ( Valid till or assigned till ) while assigning in the org. And it should be visible always in the Org Model.
We tried using Delimited Date Function, but the User gets ellapsed if the Validity is expired.With the business point of view, the requirement is that all user should be listed in Org model with respect to any dates.this would mean that if a user is terminated we would want to change the Valid till date in the Org

Hi Amrita,
Business partner number and Object ID is automatically determines by system when creating a org unit.
I dont find any configuration to create org unit with your own BP number and object ID. You have option to make repairs to the existing org unit.
Please find the below path to repair the org unit
IMG -> CRM -> Master Data -> Business partner -> Integration Business partner -Org management -> Create Business partner initially
Select the org unit and execute to get all the org units.
You can select the org units with errors /warnings and click on start repair to get automatic assignment of BP.
Hope it helps
Reward points if it helps
Regards,
Madhu

Change Log / List for Org model

Similar Messages

Maybe you are looking for