Change log of customer filled with garbage with inbound ADRMAS IDOC

Hi gurus,
when i process inbound IDOC ADRMAS for updating customer addres then Change log of customer filled with garbage.
the idoc is having FAX segment PAGER segment etc etc and if no data change even then there are many entries in change log with Delete..
Please help..
regards

Hello,
If it is a Custom Posting Program, please verify that your code is clearing the Log before it takes in any new content.
Also, check the Data and try posting it again.
Thanks and Regards,
Venkat Phani Prasad Konduri

Similar Messages

Change Log for Custom fields

Hi All,
I need the change log for custom fields added in BP transaction codes.
Basically, for tracking the changes of master data in CDHDR and CDPOS tables we will enable the checkbox of dataelement related to custom field.
As for SAP fields in BP transaction code the change history is reflecting in CDHDR/CDPOS tables. i have enabled that for custom fields added to BP transaction code but i could not see the change history for such fields.
Please let us know if iam missing any other thing?

Hi Amit Singh,
Apart from clicking the checkbox in dataelement...
There are some settings need to be done by BASIS
and some settings and entries should be made in SCOD t-code
create entriy for change document here..
also hv a look on below links...
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/fa015b493111d182b70000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/db/7a2a40ce93185de10000000a1550b0/content.htm
Custom Table values in CDPOS and CDHDR
scdo
wat do these fields in scdo stand for?
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

Change Logs for customer master data in 3.1 H version

Hello All
Are they any existing reports or change logs for viewing changes to customer master data in 3.1h version. I want to be able to report based on changes made to customer master.
I know there is a good report in 6.0 version for this- S_ALR_87012182.
If I have to develop a custom program for this in 3.1h. Which table I should use? KNA1 or CDPOS.
Any ideas will be appreciated.
Hema.

Hi,
Please check the filter settings maintained for the adapter object CUSTOMER in R3AC1. The same filter settings can be referred in tables Table: CRMFILTAB (R/3) and SMOFFILTAB(CRM) as per srinivas's reply.
Check the sales area of the customer maintained (Sales Area, Division, Distribution Channel etc.) and see if the current filter settings are restricting the customer from getting replicated in CRM. If everything is maintained fine then check for any failure Bdocs in SMW01 or SMW02.
Regards,
K

Customer Master email field - change log not appearing

Hi experts,
We noticed that the changes to the email address are not appearing in the change log for customer master. Is this always the case? Will it be possible to include the email address in the change log? If so, how?
Thanks!

Sorry.. not an issue

Change Log table Data

Hi
I have a ODS in which the active records are 608423.
And when i look into the Change log table the records are 1216846 with the status new (N) and 1108438 with status (X) and 1108438 (with status ' ' ).
I did a full load and a delta and this is a Over write ODS. I am little confused with this logic, how it put exactly the double number of records with status (N) in the change log when compared to the active table.
Thx
Thejo.

Hi Thejo,
If you changed a key figure then in the change log you'll see one storno (with minus) record for an old KF value and a new record with a new KF value.
Best regards,
Eugene

Any BAPI or FM to use to update the Customer Address with change log?

Hi, does anyone have used any BAPI or FM that will update the customer address (Central Address management fields) and the change will be logged in the change history of customer master? I have tried several FM that can update the fields but none of the change will show up in the change history of the customer master.
So far, I have tried the following FM:
ADDR_MAINTAIN_COMPLETE
ADDR_UPDATE
BDC is not acceptable due to high volume of data. However, the change log is also required.
Please share any advice.
Thank you,

Hi Minami,
for chenge address use FM : BAPI_BUPA_ADDRESS_CHANGE       (SAP BP, BAPI: Change Address)
otherwise check with below FM ,for address related information
BAPI_BUPA_ADDRESSES_GET              SAP BP, BAPI: Determine All Addresses
BAPI_BUPA_ADDRESS_ADD                   SAP BP, BAPI: Add Address
BAPI_BUPA_ADDRESS_CHANGE                 SAP BP, BAPI: Change Address
BAPI_BUPA_ADDRESS_GETDETAIL             SAP BP, BAPI: Read Address
BAPI_BUPA_ADDRESS_GET_NUMBERS    SAP BP, BAPI: Read Address Numbers
BAPI_BUPA_ADDRESS_REMOVE                    SAP BP, BAPI: Delete Address
Regards,
Tutun

Customer Master Idoc gets some fields as garbage with English Lang

Hi
We are using SAP 4.6C MDMP system. This is not unicode. We are sending customer idoc. The customers are created in Japanese and English language.
When we login in Japanese language and send IDOC then the content looks fine.
When we login with English language and send IDOC then we get some garbage character.This is because the customer was created in Japanese language and the IDOC is being sent with English language code page.
I am thinking of copying the RBDMIDOC program and include a logic which will check if the customer is Japanese and logon language is Japanese only then send the idoc.Similarly if customer is not japanese and logonlanguage is not japanese then send the idoc.
Has any one faced issue with IDOC and the data being maintained in different language.
Please share your thoughts.
*point will be rewarderd
Thanks
prashanta

Hi Anuj,
This is a configuration change that can be done via tcode NACE.
The Idocs will be automatically triggered and sent.
Ask your functional consultant for further details.
Regards,
Jovito.

Need of Change log deletion for a DSO, when DTP delta Init with Active Tabl

Hi,
Thanks for your time, please help me with the following
Scenario: I have Cube1 being updated from DSO1 with DTP delta, for quite some time. As per new requirement, I would need to create new data mart such that Cube2 gets updated from DSO1.
In order to Configure the delta, I am Considering Following options, please let me know, which one is right one.
Note: DSO1 is in Overwrite Mode.
Create one DTP with update Mode "Delta" , and "Active Table". I knew Delta Changes are captured in change log, but my understanding is, when you execute the DTP for the First time, it fetches the records from Active Table. And from 2nd Run onwards the very "same DTP" without "any changes" get the records from change log, even if we choose "Active Table".
is my understanding is Right?
Do I have to consider deleting the change log, because DSO1 is in Production from quite some time which is in Overwrite mode?
Do I have to create a DTP with Delta and Active Table, run the dtp Once(Init), then choose "Change Log for subsequent runs explicitly
please help me with these. I have reviewed many sap help articles and sdn threads but none of them were helpful. all of them explains, difference b/w active table and change log table, also gives scenarios like use a full DTP and then 2nd DTP with Delta without Data transfer. I am not looking for that kind of details.
Appreciate any help, Thanks again
Edited by: curious maven on Mar 28, 2011 8:35 AM

Hi Uma,
Thanks for your response.
to your question, If I need to load all the data from DSO1 to Cube1, answer is NO. if you read my post once again,
Existing Flow is : DSO1 --> Cube1 (Means, Active Table and Change Logs of DSO1 already Filled Up)
Requirement is: DSO1 --> Cube2. (Need to Init the Delta, and Detlas going forward)
My Questions:
(1) Imagine, DSO1 has 10 requests, so we see resepctive data in Active Table as well as Change Log. As a matter of fact, Data is being updated to DSO1 in Overwrite Mode, so all the changes(10 requests equivalent) would be captured in Change Log, which in turn helpful / used when we do Delta from DSO1 to any Cube, in my case, it used to update to Cube1. As per new requirement, it needs to update to Cube2.
My assumption is, if I choose "Active table and Delta in Extraction Tab" in DTP, During First Run (Delta Init), Data would be fethed from Active table. And the 2nd Run Onwards, delta records would be fetehced from Change Log automatically, even if we don't change the selection from Active Table to Change Log.
Is My Assumption Right?,
in this process, Do I have to Delete Change Log
(2) Do I have to Explicitly change DTP setting from "Active Table to Change Log" Once Delta Init has been run with setting "Active table" inorder to get Deltas from DSO1 --> Cube2 ?
Appreciate your help
Edited by: curious maven on Mar 30, 2011 3:14 PM
Edited by: curious maven on Mar 30, 2011 3:29 PM

If I changed my Apple ID password on my iphone then log into itunes on my phone with that new password, would it automatically sync to my laptop or would i need to put the new password into my laptop also?

If I changed my Apple ID password on my iphone then log into itunes on my phone with that new password, would it automatically sync to my laptop or would i need to put the new password into my laptop also? My laptop got stolen so I changed my password and wanted to be sure it's safe to enter in the new one on my phone. I don't want it to snyc to my laptop.

Hi loro,
Thanks for visiting Apple Support Communities.
I'm sorry to hear that your laptop was stolen. Changing your password was a good step.
Entering your new password on your iPhone will not affect the laptop, as mentioned in this article:
Apple ID: Changing your password
http://support.apple.com/kb/HT5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Best Regards,
Jeremy

Table to display change logs for transaction VK13 with certain condition.

Hi ,
Please let me know if there is any table from which we can get the change log details of condition records with transaction VK13
This is required to get information on old value and new updated value for the condition.
Thanks
Ravi Naik

Hi,
Use the program RV16ACHD (You can run this in SE38)
View the code from there for more understanding.
Tables are
KONH, KONP and CDHDR
In the CDHDR table you can view condition record changes under, Change doc. object = COND_A
Anotehr option is to use the function module SD_CONDITION_CHANGE_DOCS_LOAD which is called in the program RV16ACHD and pass the correct parameters.
Best regards,
Anupa

Tracking change log by workstation ID along with username

Hi All users,
I am using SAP business one 8.8 and want to track changes in the system in such a way that along with user name I want to know, from which workstation (or PC) the user has made changes or created any document? Every PC has its unique IP or ID, can I see this in change log in any way? that from which workstation or client PC, the user has made changes?
Any help is highly appreciated.
Thanks in advance,
Farhan Sufi

Dear Gordon,
Thanks for your reply, Actually I need only workstation ID along with user name when tracking transaction log from the tools option "change log".
I am calling it workstation ID, but you can tell me about any thing from which I can track, from which client or PC the user made any transaction. Whether It gives me computer IP or computer name or any identity of PC by which I can know which PC (among server and clients) is used by user to make any transaction.
Any help is appreciated
Thanks,
Farhan

Help with change log subscriber rights

Can someone help me give my change log subscriber object rights to see changelogs?
I am using OID 10.1.2.1.0 on RH Linux. I followed the directions for creating my change log subscriber in the OIM Integration guide under "Synchronization with Third-Party Metadirectory Solutions". I used the Oracle Ldap command-line tools from a windows box.
The cn=orcladmin user can see the changelog entries, but my subscriber object account get's "insufficient_rights" when it tries to see cn=changelog, although it seems to be able to browse the rest of the directory tree fine.
Here's a listing of my subscriber object:
C:\D\ldaptools_oracle>ldapsearch -h lynx -p 389 -s sub -D cn=orcladmin -w xxxxx -b "cn=Oracle Internet Directory" "(&(objectclass=*)(cn=miis_change_subscriber))"
cn=miis_change_subscriber,cn=Subscriber Profile,cn=ChangeLog Subscriber,cn=Oracle Internet Directory
orcllastappliedchangenumber=2600
orclsubscriberdisable=0
objectclass=orclChangeSubscriber
objectclass=top
cn=miis_change_subscriber
userpassword={SHA}8wNdwBiIGL4+QyKn06u...
authpassword;oid={SASL/MD5}ah1tJyQf8lp...
authpassword;oid={SASL/MD5-DN}Lt3/8l2R...
authpassword;oid={SASL/MD5-U}1XmqsqH9...
Here's my query for trying to see changelogs.
ldapsearch -h lynx -p 389 -D "cn=miis_change_subscriber,cn=Subscriber Profile,cn=ChangeLog Subscriber,cn=Oracle Internet Directory" -w xxxx -b "cn=changelog" -s one "(&(changenumber>=2600))" targetDN
ldap_search: Insufficient access
But the same query substituting the superuser gives me a list:
ldapsearch -h lynx -p 389 -D "cn=orcladmin" -w xxxxx -b "cn=changelog" -s one "(&(changenumber>=2600))" targetDN
Changenumber=2612, cn=changelog
targetdn=cn=instance1,cn=odisrv,cn=subregistrysubentry
Changenumber=2613, cn=changelog
targetdn=cn=instance1,cn=odisrv,cn=subregistrysubentry
Changenumber=2614, cn=changelog
targetdn=cn=instance1,cn=odisrv,cn=subregistrysubentry
etc...
Is there a particular group he should belong to?
Thanks!

Here I am answering my own question, after 10 days without a single response. Thanks, Oracle!
Through oidadmin (Internet Directory Manager) I added my change log subscriber account to the group: cn=odisgroup,cn=DIPadmins,cn=Directory Integration Platform,cn=Products,cn=OracleContext.
Don't know if this is the correct process or not, but this group has rights to see the changelogs. Now I can see 'em.
Thanks again!

Fill BEx Variable with more than one value via Custom Exit

Dear SDN comunity,
I want to fill a BEx Variable via a custom exit. My problem is, I don't know how to fill this variable with more than one value.
I try to give you some background info based on an exaple:
Variable-Details
Type of Variable: Characteristic Value
Variable Name: ZCCD
Description: Company Code Selection
Processing by: Custom Exit
Characteristic: Company Code
Variable Represents: Multiple Single Values
This is the used ABAP code:
WHEN 'ZCCD'.
CLEAR l_s_range.
l_s_range-low = '2002;2004'.
l_s_range-sign = 'I'.
l_s_range-sign = 'EQ'.
APPEND l_s_range TO e_t_range.
The system returns this message:
Value "2002;2004" is too long for variable ZCCD
appreciate your help!
//michael

Eugene, Marcus
it works now, thx a lot!
Please find attached the final code:
CLEAR l_s_range.
l_s_range-low = '2002'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR l_s_range.
l_s_range-low = '2004'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
(Delta to Marcus's code is bold)

HT201250 How do you stop a Macbookpro with OSX 10.7.5 from turning off or logging off before timemachine is finished with the backup even though I have changed settings for energy management to "never" shutdown when plugged in to an outlet?

My problem is my Macbookpro mid 2010 with OSX 10.7.5 seems to turn off or logs off before timemachine is finished with the backup even though I have changed settings for energy management to "never" shutdown when plugged in to an outlet?

I had this problem on an IMac and I finally found a solution in an unlikely place. The problem was a security setting. I don't remember right this moment the exact setting and I am not on that machine right now but when I am I will try to retrace my steps to the fix. In the meantime check your security settings and any browser or browser extensions for computer log off settings. These settings are intended to prevent unauthorized use and incidentally screw up your backups. Hope this helps.

Issue with Incremental migration - Change log data gone

Project Info :
We are migrating clients MOSS 2007 environment to SharePoint 2013 using Avepoint Docave migrator. It’s a migration and new development project where in client require new components and UI to be developed
Problem statement :
We had done last incremental migration of the data in August 2014 and when we tried doing the incremental migration in December it was found that “Change Logs”, based on which Docave does the incremental migration have been wiped out due to the Change log
duration set to 60 days by the client.
Docave support is saying that the only way to get the correct data is to perform full migration. As we have done lot of page fixes post migration, we want to avoid full migration.
Just for the information, Change logs refer to the "Event cache" table created for each content Database and the duration of the change can be set via
Central Administration > Application Management > select Web application > General Settings >Resource Throttling > Change Log
Any thoughts/approach on how shall we proceed to tackle this situation
Regards,
AMit

Hi,
As Avepoint Docave migrator is a third party product, I suggest you can contact the corresponding support for help.
If you want to migrate MOSS2007 to SharePoint 2013, I suggest you can follow the article below:
http://technet.microsoft.com/en-us/library/ee947141(v=office.15)
Best Regards
Jerry Guo
TechNet Community Support

Change log of customer filled with garbage with inbound ADRMAS IDOC

Similar Messages

Maybe you are looking for