Change log of posting period,exchange rate.

Hi,
I want to find out change log that is who has changed ,when it is changed for following.
1) Posting period in MM  through transaction MMPV 
2) Through transaction OB52 that in FI  
3) Change in Exchange rate that is T code OB08
Can any one tell me how to find the same.
Thanks and regards
SAP learner.

Hi
Thanks for feedback.I have chanegd one currency in ob08 and tried to search log by entering table as Tcurr,then todays date on which data was changed ,evaluation for -tables.On output could not get log of changes made by me.Is their any setting required to have history.Can please tell procedure.For posting period what will be selection data.
Regards
SAP Learner

Similar Messages

  • KEFC currency exchange rate issue - using end of period exchange rate

    Hello,
    We are experiencing currency deviations for manual upload file because  exchange rate type M is using exchange rate at the beginning of the period.
    We would like to use the exchange rates at the end of the period instead beginning of the period.
    Does anyone know where I can find the program that KEFC uses for exchange rates during upload and how I can modify it so that it uses end of the period exchange rates.
    Thanks,
    Bhat

    Hello Bhat,
    In case actual data (plikz = 0) is updated in COPA line items. these
    data will be updated in all currencies which are set in Customizing for
    operating concern (tcode KEA0).
    for example:  operating concern ccy = USD and company code ccy = NZD
    Now foreign ccy can be any ccy other than Operating concern currency
    and company code currency.
    Suppose you choose foreign currency = EUR and give your own KURSF
    System has to convert EUR into USD as well as into NZD.
    So it cannot use the same exchange rate (KURSF) for both conversions
    Hence for actual data upload the system always takes the 'M' rate for
    conversion.
    please also  refer to note 618114 for the issue.
    Best regards,
    Ronghua Fan

  • Posting of exchange rate differences

    Hello Friends,
    For our organization we will have uploaded in SAP price list for products calculated in local currency at a fix rate between EUR and RON. Now the problem is that this rate is fluctuating every day and the result can be that there will be differences between the daily rate and our fixed rate.
    Our question is if the system is able to calculate letu2019s say not for daily fluctuating rates, but for an average rate, the difference between the fix rate and this average rate related to the invoices of a certain customer for a certain period.
    This will be like a bonus (discount) we would like to give back to our clients to cover the difference related to the fluctuating exchange rate between EUR and RON.
    If this is possible to be made in a certain automatic way by the system and would you be so kind in explaining how it is done, in order for us to know.
    Thanks!
    Regards,
    Kedar

    Hello,
    1.  You have to assign Forex GL's for the reconciliation accounts in OB09.
    2.  At the time of payment for incoming invoices, system can read the valuation differences and it will post to Realized Gain/Loss accounts and B/S adjustment account.
    3. You can consider this amount to issue bonus to your customers.
    Rgds
    Murali. N

  • Posting of Exchange rate differences in parallel currencies

    Hello experts,,
    We are on ECC 6.
    When we enter an incoming invoice with MIRO and the current exchange rate differs from that in the PO, the exchange rate differences in local currency and in parallel currency (group currency) post to different accounts.
    Is this a standard feature / behavior? If so, where can i find the settings.
    Shouldn't the postings in all currencies (except doc currency), in the event of exchange rate difference post to the same account?
    The material ledger is not active.
    We have maintained a local currency and a group currency.
    Example to illustrate my issue -
    DC = JPY
    LC = SGD
    GC = USD
    PO for asset.
    PO value = 100000 JPY
    Ex rate not fixed in the PO.
    Ex rate at PO -
    100 JPY = 1.6 SGD
    100 JPY =  0.85 USD
    Ex Rate at IR
    100 JPY = 1.7 SGD
    100 JPY =  0.9 USD
    When IR is entered,
    The exchange rate difference of 100 SGD (@ 0.1 per 100 JPY) is posted to the asset. No posting in USD (though there is a balance of 50 USD).
    At clearing (Transaction FB1S - GL account clearing) the exchange rate difference (in GC only, because no balance in LC) of 50 USD (@ 0.05 per 100 JPY) is posted to the Exch. rate difference GL acct.
    Thanks in advance for your advice/solution.
    B. Regards,
    Halaswamy

    Hello,
    1.  You have to assign Forex GL's for the reconciliation accounts in OB09.
    2.  At the time of payment for incoming invoices, system can read the valuation differences and it will post to Realized Gain/Loss accounts and B/S adjustment account.
    3. You can consider this amount to issue bonus to your customers.
    Rgds
    Murali. N

  • Change Log issues - Post Upgrade

    Hi Experts,
    We are in the process of Upgrading BW from 3.X to BI 7. As part of this we copied our existing Production system into the sand box and basis did the technical upgrade on the same (Sand Box). Later we ran some post upgrade Jobs as part of the SAP defined Upgrade Process.
    1) But after the upgrade i can notice that most of the ODS objects, doesn't have 'Change Log' table in the 'Information (Log/Status)' screen.
    2) Even when i try to view the change log content in Manage screen, it gives me a pop up to enter the change log table, instead of directly taking me to the selection screen.
    3) When i try to activate a request, even that fails with an SQL error 'SAPSQL_EMPTY_TABNAME'.
    Is there any process that has to be run to link the Older version change log tables to the corresponding ODSs after Upgrade?
    Has anyone come accross similar issues? If yes, how was it solved? All suggestions are invited.
    Thanks and Regards,
    Jay

    HI JayaPrasad,
    Chek the note : 1059171 which is related to Change log,
    I too faced this issue when upgraded to Bi7.0 on SP12, but as soon as SP13 is installed the issue is solved, so I suggest to go for SP 13 for upgrading to Bi7.0.
    Regards,
    Srinivas

  • PIR Price change log with validity period

    HI All,
    We have a requirement in our project for a report that shows Price change (i.e. Old value and new value) in PIR. Yes i know there are lot of standard reports through which i can see the change but i am facing difficulty in tracking these changes to a validity period. For eg: if a PIR has 4 validity periods for every quarter, how can i link the price change to the validity period for which that change was made?
    We are open to develop custom report if standard is not available but need logic to determine the validity period.
    Thanks in Advance.

    Dear Vipin Sharma
    If you find your solution, then you should close your discussion. Have a look into the blog for a guidance How to close a discussion and why

  • Exchange rate difference posted to Group currency only during MIRO

    Hi SAP Gurus,
    We're activating parallel currency in ML and USD is the group currency. GR/IR clearing acct is managed in local currency only.
    OB22
    Crcy Type  30    Group currency                               Currency   USD
    Valuation        Legal Valuation
    ER Type    M     Standard translation at average rate
    Srce curr. 1     Translation taking transaction currency as a basis
    TrsDte typ 3     Translation date
    Please find below scenario:
    Co code currency: ZAR
    PO: ZAR
    Upon GR:
    Posting date- 04/14/2009 exch. rate 1ZAR= 0.11099 USD
    Entry: debit Expense - 4,078.19 ZAR/ 452.64 USD
              credit GR/IR acct -   4,078.19 ZAR/ 452.64 USD
    Upon IR:
    Posting date- 04/20/2009 exch. rate 1 ZAR= 0.11279 USD
    Entry: debit GR/IR acct - 4,078.19 ZAR/ 452.64 USD
              credit Vendor acct - 4,078.19 ZAR/ 460.02 USD
    automatic additional debit Expense - 0.00 ZAR/ 7.38 USD
    Here are my questions:
    1.) Where would I check the setting for the GL account used in the automatic line entry posted in group currency during IR? (3rd line item above)
    2.) Can this be changed? Say instead of the original acct assignment, the management want to change it to FX gain/loss account
    3.) How?
    I have checked several notes (331910,etc) but I can't seem to find the answers to my questions.
    Appreciate your help. Thanks!
    Regards
    Dru

    Just an update to this issue- I just found out that the system is pointing to KBS when posting the
    exchange rate difference in group currency upon IR, hence, PO account
    assignment is adopted. I'd like to rephrase my question- is there any
    way we can change SAP behaviour such that it will point to other
    transaction key (e.g. KDG) other than KDM? Bottomline is we want it
    charged to other GL account not the one in the PO.
    Thanks so much for your assistance.
    Regards,
    Dru

  • Exchange Rate difference posting during MIRO posting

    Hi ,
    We are facing an issue for exchange rate difference posting during MIRO.
    PO creation , GR posting & IR posting done on same date. Vendor in PO has different currency than company code currency. Exchange rate maintained in OB08 for this period is taken in PO.
    PO value & GR value is same. Due to raw material cost there was price difference posted during GR posting.
    (i.e. Raw material cost - GR/IR value = Price difference amount)
    During posting MIGO, 3 accounts got posted.
    Raw material cost account got debited & offset credit to GR/IR account & price difference account (in vendor & company code currency also)
    During posting MIRO, 4 accounts got posted.
    Vendor account got credited with GR/IR amount & offset to GR/IR account debit.
    Exchange rate difference account got credited & offset to price difference account (in company code currency only)
    Since PO creation , GR posting & IR posting done on same date, then why system has posted exchange rate difference account in local currency only during MIRO posting ?
    Your inputs appreciated.
    Thanks & Regards

    Hi,
    there is a setting in configuration of logistics invoice verification where you can control the calculation and posting of exchange rate differences. If you had the setting active that exchange rate differences are calculated against a planned exchange rate, that might lead to the kind of postings you describe. Please check.
    best regards,   Udo

  • Avoid posting of realized exchange rate differences in 2nd local currency

    Dear SAP fans,
    The situation here in our company is that a company code is set up with NZD as 1st and EUR as 2nd local currency (currency type 30 "Group currency" for EC-CS consolidation).
    Therefore, all postings (and balances) are also translated and saved in EUR (with the current exchange rate).
    We now have an open item managed G/L account for prepaid expenses, which is used to collect postings which are then cleared later. It's however no payable/receivable account for vendors/customers. Therefore, it doesn't make sense to post realized exchange rate differences when clearing this account. This is however what SAP wants to do when we try to clear it.
    For example, if I post today 100 NZD and two months later again 100 NZD to this account. If the NZD vs. EUR exchange rate changed in the meantime, then SAP won't let me clear this account without posting realized exchange rate differences, which makes however no sense.
    Does anyone of you meet this problem before? Could you please give me a hint?
    I thought about setting the "Only balances in local currency" indicator in the G/L account master but this helps only for differences between local and document currency (and not for differences in 1st and 2nd local currency).
    Any help is highly appreciated!
    Thanks and best regards,
    Peter

    Dear Padma,
    Thanks for your answer. The customizing activities you mentioned are already set up in the system. This is not our problem.
    The problem is however, that we don't want SAP to post automatically realized exchange rate differences between 1st and 2nd local currency as this doesn't make sense in this business case.
    It's about an open item managed G/L account which is used to collect posting which are later cleared. It's not a payable/receivable account for customers/vendors where the posting of realized exchange rate differences makes sense.
    We've thought about several solution which unfortunately all didn't help us:
    - Don't setup realized exchange rate differences accounts or set them up only for group currency (in OB09)
    - Set indicator "Only balances in local currency" in G/L master data
    Best regards,
    Peter

  • Exchange rate differecen to be posted to different WBS in forex p/o

    Dear Friends,
    Pls note my client hv budget allocations in WBS & thru this only the procurement activities are happening. In case of import p/o the exchange rate is displayed by default when you enter the date but when the G/R-IR happens the exchange rate differs and the difference is posted to the respective stock account as per the customization settings. Their requirement is they want the system to post this exchange rate difference to different WBS along with G/L account automatically which they shall create only for this. I tried this OBYC (KDM) but their only the G/L can be assigned & not WBS.
    Kindly help if any configuration settings needs are required ?
    Thank You
    Prashant B.

    Hi Shashi,
    As per Accounting Standards, the asset must be valued on the exchange rate on the date which risk and reward is transferred from seller to buyer.
    For example If the vendor despatch the assets on 01.03.2014 at his place and contract is Exworks then the asset must be valued on exchange rate on 01.03.2014. Lets assume exchange rate on that day is 1USD=60INR. The price is 100 USD. You receive the assets on 10.03.2014 and exchage rate on that day is 55 INR. Now if you make GR on 10.03.2014 Asset value will be 5500 INR whereas as per AS it should be 6000 INR. That is why when you do MIRO the differnce between 6000 and 5500 is posted to asset.
    When you do MIRO you must enter currency(USD) in Basic data tab and exchange rate 60 in details tab.
    What happens in your system is standard behavior of SAP as well as correct process as per Accounting Standards.
    Hope it is clear.
    Regards,
    G.Sethuraman

  • Exchange Rate Difference in MIRO not posted to the KDM account

    Dear Gurus,
    I have a query, I have defined an account in KDM. After the GR of the PO, if there is a difference in Exchange Rate system posts the Exchange Rate Difference to the Stock Account.
    My client wants this this difference at the time of MIRO should be posted to the KDM account. I am invoicing in my Company Code Currency not in PO currency this is also a requirement.
    Kindly provide me a solution for this.
    Regards,

    If material price is standard then only KDM account will account.
    Check this answered link [Exchange Rate Difference |Exchange Rate Difference]
    Edited by: Jeyakanthan A on Aug 3, 2010 2:13 PM

  • Not able to post exchange rate difference in GL account configured in OBYC-

    Hi Guys,
    As per my client requirement, We need to post exchange rate difference(PO & in IR) in GL account. I have configured setting in OBYC - Transaction key is KDM. Also i have selected check box for company code, at spro>MM>Logistics Invoice Verification>Incoming Invoice>Configure How Exchange Rate Differences Are Treated.
    Still system is not able to pick the GL account which is defined in OBYC.
    Please help.
    Steps i have carried out:
    1. Assigned GL account in OBYC, Transaction key KDM
    2. selected check box for company code, at spro>MM>Logistics Invoice Verification>Incoming Invoice>Configure How Exchange Rate Differences Are Treated.
    3. Post PO (with some exchnage rate say 1.25)
    4.Post MIGO
    5. POST MIRO (Exchange rate is 1.50), Here when i simulate or post, the GL account is not picking to post difference.
    M i missing any config????
    I appreciate your help a.s.a.p,.
    Thanks
    Akshay

    According to me, system wont calculate exch rate differences during MIRO.
    Please make sure that, you have not selected the Exch Rate Fixed check box in PO header part, next to the exch rate field.
    MIGO Entry:
    Inventory/Expense  Dr 100USD   5000INR
    GR/IR......................Cr 100USD   5000INR
    MIRO Entry:
    GR/IR......................Dr 100USD   4700INR
    Vendor....................Cr 100USD    4700INR
    In this case, system will create  0 USD & 300 INR for forex diff gl line item, when you clear the GR/IR open items only.
    Assume INR is your LC.

  • F-28 Exchange Rate Difference Account with a zero posting

    Hi SAP Gurus,
    When I try to post an incoming payment, even though there are no exchange rate differences, the system post to exchange rate difference account. How to configure the system to stop displaying the exchange rate difference account when the difference is zero.
    Regards,
    Siva

    Dear Siva,
    I dont think that the system will post to exchange rate difference account if there is no difference. Probably you are seeing the doucment in the foreign currency. Try to simulate the entry and on the simulated screen, click on the "Display currency" tab on the top of the entry. That will show the simulated entry in the local currency. In the local currency, there may be some difference.
    Check it and if useful, assign points.
    Regards
    Venkatesh

  • Exchange Rate date for Invoice posting for Slovak Republic

    Hi,
    We have a requirement wherein for Slovak Republic, Invoice should pick up ( at the time of Invoice Posting) the exchange rate from the Delivery Note date and not the Invoice Posting Date. This is applicable for all vendors which have a Slovak Republic VAT Registration number. I suppose this is some country specific requirement for Slovak Reublic.
    Do we have to apply some Notes to achieve this functionality. Any pointers to this issue is highly appreciated.
    Regards
    Anupam

    SO VBRK-KURRF (exchange rate for FI)  is taken from "pricing date" in standard?
    Are you 100% sure? :
    FIrst of all: there is no pricing date (PRSDT) on invoice header level
    Second: I`ve got information from FI that VBRK-KURRF is taken from posting (billing date) VBRK-FKDAT
    I have found also programs, there is provided folloving calculation formula:
    LV60AA90
    Currency conversion (WAVWR is in local currency so far)
            ACTDATE = VBRK-KURRF_DAT.
            IF ACTDATE IS INITIAL.
              ACTDATE = VBRP-PRSDT.
            ENDIF.
            DA_WAVWR_HW = VBRP-WAVWR.
            DA_WAVWR_KW00 = WAVWR_KW00.
            DA_WAVWR_PCVP = WAVWR_PCVP.
    LV60A036
    Determine date
        IF vbrk-kurrf_dat IS INITIAL.
          ld_kurrf_dat = vbrk-fkdat.
        ELSE.
          ld_kurrf_dat = vbrk-kurrf_dat.
        endif.
    So what is the verdict?

  • Change Exchange Rate in VF02 T-code

    Dear Friends,
    I need to change the exchange  rate in transaction code VF02 before creating accounting entries, which field is presently grey field. Please provide the solution to change the exchange rate in VF02 transaction code.
    Thanks and Rgds,
    Hemant Kumar

    Dear Customer,
    In standard system, if there is a manual entry in the sales 
    order field VBKD-KURRF (Goto -> Header -> Accounting), then it is copied
    into VBRK-KURRF. Otherwise VBRK-KURRF is determined automatically      
    during invoice creation. See the note 36070.                            
    please have a look at the following notes:                                                                               
    22781 Exchange rate in accounting, exchange rate type                 
    666628     RAPERB00/RAPERB2000: Incorrect translation date            
    453834 Incorrect exchange rate type after 'Change billing document'   
    In note '22781'. There is a description how you could change          
    the field VBRK-KURRF 'Exchange rate for FI postings' using the data-  
    transportroutine.  
    I hope that the information are helpful.
    regards
    Claudia

Maybe you are looking for