Change Log of Table

Hi,
How do you display Change Log of a table in the Report.
Answers will be rewarded with points.
Thanks,
Bluesh

hi check the table..
from menu select Utilities--> Change log.
or tables DBTABLOG or V_T585A
Regarding Log changes in table
regards,
venkat

Similar Messages

Change has to be made in cleani up change log/PSA tables from Process chain

I need to clean up the Change Logs and PSA tables from the Process chains. Currently the change logs and PSA are deleting 90 days and 60 days from the PCu2019s. I need to change this to 7 days.
I took one PC first. It has DELETE PSA REQUEST. when i double click ..under 'Selection pattern for pattern-based deletion' - there are so many data sources listed (older than - 60days). Now i need to change this to 7 days . how do i do it?
Please guide me stepwise.

When I searched with this I got this document...
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Please search forum to get your solution faster
Regards
Anindya

How to capture - Custom tables change log

Hi,
I need to maintain the change logs for Cutom tables. But, my custom table contains the fields with data type DEC. So, i am getting the record as "####" for DEC fields.
These values, i have captured in Table Maintenance generator Flow Logic Editor - In the loop of EXTRACT or TOTAL.
PROCESS AFTER INPUT.
MODULE LISTE_EXIT_COMMAND AT EXIT-COMMAND.
MODULE LISTE_BEFORE_LOOP.
LOOP AT EXTRACT.
ENDLOOP.
So, can you please help me to find the solution?
Regards,
Srinivas
200AR99#u200C###### MUKKAVILLI 20090728
200AT02###u200C#### MUKKAVILLI 20090731

Hi,
Please refer to the following link
http://www.saptechies.com/how-to-activate-the-img-change-log/
Track Table chnages
Hope this helps.
Regards,
Swetha

RPUAUD00 Change Log Issue on Table T585B

I added some new infotypes to the RPUAUD00 change log on tables:
t585a
t585b
t585c
Everything seems to be working as expected, but I received soft errors on t585b:
"! All data fields 0006 01 will be deleted"
when I used * (all fields).
This did not happen when I used actual field names.
Does anyone know what that means?
thanks!

It's just a warning for this specific view if you put '*' in field name. What it means is that if you currently configure audit changes
for specific fields of this infotype, all of these entries will automatically be deleted by SAP when you use '*' (all fields are marked for audit). Therefore, there should not be a concern on the message.

T095B and ANLZ change log activation

Hi Experts,
We want to activate change log for table T95B and ANLZ. Will it have impact on system performance after doing so? As per my understanding it should be no. Please guide.
Regards
Zunaid

Hi,
Whether to log the changes made to a field is based on the flag "Change document" in Data element property (Further Characteristic Tab). These change logs will be updated in tables CDHDR & CDPOS.
If you want to log changes made to the columns in the custom table you have to create the change document object in
transaction code SCDO.
Search SDN for details on Creation of Change document objects.
Regards
Vinod

Change Log of Transactional PR

Hi Experts,
I understand that I can get the change log of a transactional PR from database table CDHDR by passing in the GUID of the PR, that will return me a list of changed log based on username and time.
From the list I retrieved from CDHDR, based on the GUID and CHANGE NUMBER, I can get more details such as the table and value that was changed from CDPOS.
But how can I know that the change is for which line item of the PR?
Thanks.

hi check the table..
from menu select Utilities--> Change log.
or tables DBTABLOG or V_T585A
Regarding Log changes in table
regards,
venkat

Need suggestion to get data from change log table of ODS.

Hello,
There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
Please let me know if you have any suggestions.
Regards,
Sanjay Chaurasia.

Hi,
You can use the changelog table of the DSO.
Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
In the update rule Routine, give the tech name of Change log table instead of Active table name.
Hope it helps.
Krishna

How to find out the top ten Change log tables in BW

I want to know the top ten change log tables in terms of size. Do we have a SAP standard table where we have the following fields : "changlog table name", "number of records" field or "data in size" field.
Regards,
Prashant M J

Hi,
Click on change log table in the ODS/DSO at the top you see the name as /bic* which is the name of the database table which could also be seen at SE11.
If you wana see the requests in this change log use rstsodsrequest
and if you wana see the size in terms of kb, mb DB02 or st04
use the table name /bic* and click on tables and indexes option in history tab
DB02 tells you the sizes of the tables present on database. Incase you are not able to your basis team would help you in that
Thanks and regards
Kiran

Need suggestion to store change log history or creating a zlog table

Hello,
My requirement is to create a Ztable which will store the Hisotry / change log of data.
I have a program where i am using insert / update for a database table LFBW and displaying the log in the ALV ouput.
I need the same to be updated on Transaction level of FK02 (where entries of Table LFBW gets reflected).
so can any1 suggest me how this can be achieved?
If there is no way to store change history while insert /update on database table from prgram level then what type of z table(Type of Delivery Class ?
Data class ? i should create for the same
Thanks,
Anoop

Hello Raymond Giuseppi,
Thanks for providing the above details.
* KRED_WRITE_DOCUMENT
=> I checked this FM and found that OBJECT ID is mandatory to create change log
But while updating LFBW ( using insert / update command on LFBWin Zprogram ) it doesnt create
any data in CDHDR ( didnt get any object id)
* VMD_EI_API Method MAINTAIN_BAPI
=> that is for creation / updation of vendor master. Here, I am looking for updation of withholding Tax-type in FK02 (Database Table - LFBW)
* RFBIKR00 Report
Checking the same.
Regards,
Anoop

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

Change logs not available for tables

Hi Experts,
Is there any change logs available for the tables PCEC, FTXP, T030
We need to add logs so that we can keep track of the changes.
Please let me know if someone knows the solution.
Regards,
Srinivas

Dear Srinivas,
Go to SE11 and key in your table, then select Display.
In the top, you will be able to see Technical Settings Button. click on it.
It will show you the technical details for that table.
There will be an indicator at the bottom LOG DATA CHANGES.
If this indicator has been set, then only the changes will be recorded.
For change log, you shall make use of the transaction SCU3.
AUT10 shall also be used.
thank you
Venkatesh

Table to display change logs for transaction VK13 with certain condition.

Hi ,
Please let me know if there is any table from which we can get the change log details of condition records with transaction VK13
This is required to get information on old value and new updated value for the condition.
Thanks
Ravi Naik

Hi,
Use the program RV16ACHD (You can run this in SE38)
View the code from there for more understanding.
Tables are
KONH, KONP and CDHDR
In the CDHDR table you can view condition record changes under, Change doc. object = COND_A
Anotehr option is to use the function module SD_CONDITION_CHANGE_DOCS_LOAD which is called in the program RV16ACHD and pass the correct parameters.
Best regards,
Anupa

Activate change logs for the table V_T007K

Hi,
Change log check box is activated in table and change logs is activated in system. But still I am not able to view any change logs recorded for the table V_T007K using SCU3 transaction.
I tried by changing some data and than checked the SCu3 transaction. nothing is recorded against the table.
Please let me know what needs to be done to capture the change logs for the changes done to the data in the table V_T007k table.
Thanks in Advance.
Thanks & Regards,
Madhuri.

Hi
The table u mentioned V_T007k is not a transparent table
.its a view only for views u cant track changes.
But only for transparent tables u can only track changes thru SCU3
Also u can find the changes in a table from SAP TABLE
CDHDR and CDPOS.
if helpful reward me points.
Regards
Manas Ranjan Panda

Change logs for Z table.

Hi All,
I am trying to fetch the old value and new value for the z table field.Change log is activated for the Z table. but i dont know how to fetch the change logs.
SCU3 is the standard transaction to see the change logs for all the tables.
Is there any table where the change logs values are maintained?
Does anyone know how to get the change log value?
Thanks in advance.
Regards,
Amruta.

Hello,
If for a specific set of tables no change documents are triggered by SAP you can always setup your own Change Document Object with transaction SCDO.
Of course you need to be careful with this transactions (how big is the table data, how many changes, etc...).
Table logging is something else, they are stored in table DBTABLOG and can be analysed via SCU3.
For table logging you need extra system parameters to be set, they are explained in SAP Note:
Note 1916 - Logging table changes in R/3
Pay attention with table logging because a lot of tables are logged in DBTABLOG once you activate the parameter, this can have a major impact on performance.
To have an idea what other tables will be logged, check tcode SE16 on table DD09L and put an 'X' in field PROTOKOLL, result will be thousands of tables.
In your specific scenario I think it is best you go for the change documents with SCDO.
Wim Van den Wyngaert

New entries in table TSTC not capturing in scu3 change logs

Hi ,
We have TSTC table log enabled.
New Entries which comes through transport in the table TSTC are not capturing in change logs.
We have created a new Z T-code and transported it to Quality and then to Production.
But in the change logs of the tbale TSTC it is not captured both in quality and Production.
In the table TSTC t-code is present.
But the change log for the table doesnot show any new entry created.
In development change log of TSTC, the change is present but in Quality and Production it is not present.
Development client : 400
Quality Client : 600
Production Client : 600
Can any one spill some beans on it...
Thanks & Regards
Kiran

You need to add "recclient = ALL" (or same client value as "rec/client" profile parameter in RZ10) to the transport profile as well in the STMS.
Search SAP notes and the forum here for "recclient" (without "/")
Cheers,
Julius

Change Log of Table

Similar Messages

Maybe you are looking for