Change log - where to find

Where could i find list of changes to firmware (what was changed in next releases) - for nokia N73

You could search google.
Or a Nokia Service Centre would be more accurate.
Nokia N95
V 20.0.015
0546553

Similar Messages

Change log, where can we find it?

When a new firmware from nokia released, what is the change/fix/upgrade in a newer one?
Where can we find those information?

There isn't an official release, a lot of posts are made my users here, but nothing official.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Want to Find Table name of Show Differences Values from Change Log of Bills of Material

Dear Experts,
I Add and edit the data of Bills of Material Form in SAP B1.
I know that with using change log i can find out the history
to change that particular record.
I also know that It Use AITT and ATT1 for History Data to be saved.
but when i click on Show Differences button then it will display details history
but i can't find out that table that data are display in Show Difference.
I hope you all are understand my requirement.
Thanks & Regards,
Nishit Makadia

Hi Nishit...
There is no separate table for the History, it is a query driven report shown in the show in the change log.
if you need to understand the change u need to check with the history tables....
hope helpful
regards
Kennedy

Configuration Change log in Production

Hi all
Some configuration changes have been directly made in production at our client. How can we find out what changes are made? Going into SCC4 > Change logs, I could find out who made all the changes. But it does not show what configuration changes are made.
Thanks
Vamsi

Dear Vamsi,
I'm not sure whether in a single report you can fetch all the changes related to configuration for a particular module.
But I'm sure in most of the nodes the configuration change logs gets recorded.Check these links,
Re: How to find when a new Material type is created
Configuration change Log
Regards
Mangalraj.S

Change log of Sales Documents/Item in notification

Hi Guru,
if sales documents/item in notification is changed or removed, the system didn't record the changes in the change log, where I can set it to record the change log for notification?
Thanks,
Kick

Yes it should, but maybe those documents were created before the "History / Log" in General Settings > Services were changed from 0 to (example) 99.
Only after this action, information will be recorded in the Chang Log.
Regards
Carin

How to find workcenter and production order change log

Hi,
I am new to PP function.
Due to problem tracking, I want to know where to find the change logs for
1.Work Center
2.Production Order
Many thanks!
Steven

Hello Steven,
to view change log for production order:
1. you can go to CO03 at the header functions choose GOTO --- CHANGE MANAGEMENT (here you can see if in the order there where Change process been done to the order)
2. Also in CO03 at the header functions choose HEADER --- STATUS CHANGES (with this you can track the user, system status changes, the action done, date, time, user,transaction happen on the production order.
to view change log for work center:
1. go to CR03 choose EXTRAS --- ADMINISTRATIVE DATA (here you can track the date and who made the changes ans status of the work center)
2. you can also check table CRHD which you can see detailed of the work center you wish to see.
Thanks

I need to change my iCloud email address. I changed it for my Apple id but I can't log out of iCloud to change it there. Find my iPad is activated so I can't delete my iCloud account. I don't have the email address the iCloud login has anymore.

I need to change my iCloud email address. I changed it for my Apple id but I can't log out of iCloud to change it there. Find my iPad is activated so I can't delete my iCloud account. I don't have the email address the iCloud login has anymore so I can't have the password sent there. To sum it up, iCloud has an old email for the account log-in. I don't remember the password for the old email. I have Find My iPad activated so the iCloud account cannot be deleted. And I am already logged out of iTunes & App Store.

If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple IDand that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

HT200285 I want to change my wallpaper to an image that was available before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background. Greyish hues. Where can find the image & how do I get it back on my phone?

I want to change my wallpaper to an image that was available
before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background.
Greyish hues. Where can find the image & how do I get it back on my phone?

I want to change my wallpaper to an image that was available
before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background.
Greyish hues. Where can find the image & how do I get it back on my phone?

I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

Hi people,
I'm typing from Brasil, sorry my English.
I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
I intend to keep the original DVD driver and install the SSD in the same HD place.
If yes, where I find a tutorial about this?
And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
What brand and model of SSD do you recommend?
Thanks a lot for now and best regards all.
Carlos Sgrillo
Porto Alegre, RS, Brasil

Tukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/

How to find out the top ten Change log tables in BW

I want to know the top ten change log tables in terms of size. Do we have a SAP standard table where we have the following fields : "changlog table name", "number of records" field or "data in size" field.
Regards,
Prashant M J

Hi,
Click on change log table in the ODS/DSO at the top you see the name as /bic* which is the name of the database table which could also be seen at SE11.
If you wana see the requests in this change log use rstsodsrequest
and if you wana see the size in terms of kb, mb DB02 or st04
use the table name /bic* and click on tables and indexes option in history tab
DB02 tells you the sizes of the tables present on database. Incase you are not able to your basis team would help you in that
Thanks and regards
Kiran

Where to find the log file

Hi,
I am gettting the following runtime portal error and do not know where to find it.
I have searched in my c drive but nothing has been found.
Do you guys have any idea where i can locate this error log ??.
Runtime error portaal
Fout opgetreden bij verwerking opdracht voor :
iView : pcd:portal_content/com.getronicspinkroccade.GetronicsPinkRoccade/com.getronics.civision.CiVision/com.getronics.civision.civga.civga/com.getronics.civision.civga.iViews/com.getronics.ExampleOneIntl
Naam component : WorkShopInl.default
Error occurs during the rendering of jsp component.
Exception id: 10:28_12/10/05_0005_3628850
See the details for the exception ID in the log file

Log and trace messages are written in <installation_path>j2eeclusterserver0log<b>defaultTrace.trc</b>. But it's very hard to read this file's content with a text editor... So you should use the LogViewer utility. You can use either the standalone or the integrated LogViewer that you can find in <i>J2EE Visual Administrator -> Server XX -> Services -> LogViewer</i>. Have a look at this weblog for learning how to use it:
Netweaver Portal Log Configuration & Viewing (Part 2)
Davide

Where to find adapter engine runtime/error logs?

Hello there,
Wheere can I find the complete (i.e. not only the details of a message delivery via the runtime workbench ) error/runtime logs of the AFW engine?
Im having some problems with the file/FTP adapter and would like to take a closer look of the logs generated by the adapter.
Thanks!

Hi,
>>m having some problems with the file/FTP adapter and >>uld like to take a closer look of the logs generated by >>e adapter.
Using Visual adminsitrator you can view detailed logs of various components. IN VA->server->services you will find log cnfiguration, which lets u to change logging more of the components of interest from error to debug.
for better trouble shoting of problems set the logging mode to debug.
test ur scenarios and in log viewer you should be able to see the detailed log.
cheers,
Naveen

Where is the Flex SDK 3.6 change log?

Now we have almost 3 weeks after the release of Flex SDK 3.6 and I still can't find up-to-date release notes or a change log. The release notes and many other online resources still mention Flex SDK 3.5. Also I can't find a milestone in the bug database for filtering the affected issues.
Does anybody know what's new in 3.6?

I've looked for the changelog as well but could not find it either.
You should check at Flex Bug Management System https://bugs.adobe.com/flex/
no registration is required to browse.
In Project, select Flex SDK
In Issue select Bug (or any)
In Milestone select Flex SDK 3.6(Release)
And that's it , click on View and you'll see what's been changed.

Where to find BPS error log

Hi Experts,
I try to open a BPS planning level and I receive the following error.
UPC_FW030 with the hint to analyse the error log.
There must be something wrong with the selection but the system automatically removes parts of the section.
Can anyone tell me where to find this error log
Regards Michael

Hello Stephen,
the log or protocol you mentioned doesn't contain any information, but I figured out what coursed the problem. It was a hierarchy in the selection of the planning level. The selection with the hierarchy was installed in 2009 and by debugging the function module UPC_OPTIOS_GET the select statement inside returned 31.12.2009 for DATETO from the table UPC_NODES and this doesnu2019t fit to 2010.
The reason is, that hierarchy selection will be stored with a timestamp.
Regards Michael

Where to find self service log

Hi,
I have setup self service portal under Enterprise Infrastructure Cloud on EM12c. When a SSA user requests a server using a template, the request fails with "Execution Error" and no other detail on Self Service Portal Screen. Do any one one know how to troubleshoot this and where to find the detailed log file?
Thank you.

By template, I presume you mean VM template.
Have you set up the Oracle VM Self-Service Pools and Zones as outlined in:
http://docs.oracle.com/cd/E24628_01/doc.121/e28814/cloud_setup.htm#CEGFJIHI

Change log - where to find

Similar Messages

Maybe you are looking for