Change logs missing for OB52

Hi Experts
We have a peculiar problem where change logs are missing for some of the transactions made through OB52 for modifying FI posting periods.
I vefired that change logging has been correctly activated for table T001B. Though change logs are displayed for most of the transactions through SCU3 or in table DBTABLOG, logs will be missing for some records.
Can you please let us know what could be the possible scenarios where change logs are not recorded for OB52 or table T001B even though logging has been activated.
Any inputs on this will be very helpful.
Regards,
Santosh

try log on tcode S_ALR_87003642

Similar Messages

Change Log / List for Org model

Dear All,
We are facing unknown changes in Org model every now and then. How can we trace out the change log or Change list for changes done in PPOMA_CRM transaction?
Help me if some notes are there in this regard. I am unable to find any from my side.
Regards,
Rajesh

closing the question as no responses were there

Change Log activation for Work Orders

Hi all... i am a newcomer to this community. I have heard a lot about it & would like to utilise this platform for learning & knowledge sharing experience.
Well, I wanted to activate Change LOG for tracking changes made to Maintenance work orders.
I have tried it thru' SPRO
Plant Maintenance & Customer Service / Maintenance & Service Processing / Maintenance & Service Orders / Functions & Setings for Orders / Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
I have ticked on the order types defined for my plant... without success.
Any other way to try this out ?
Thanking u in anticipation.
With Warm Regards...

Anand:
Unfurtunatly, not all the modification are registered in the log. For ei., You can track the systema status modification, the PR generation, etc. What fields change are you trying to modify?
Hope this help
Ezequiel

Change log table for Vendor Bidder information?

Hi,
In BBPMAININT transaction we have BIDDER DATA tab.
If we change any Classification data in BIDDER DATA tab for the Vendor in which table it updates the change log information?
I checked in BBP_SUPP_MONI table this table updates only when we change any Company data information for the vendor not Bidder tab.
can any one help me?
Thanks.

Hi
There is no standard report.
But you can check in CDHDR & CDPOS tables for change log.
Object Class= BUPA_BBP0020
Tabname=BBPM_BUT_FRG0021
Best regards
Ramki

Need of Change log deletion for a DSO, when DTP delta Init with Active Tabl

Hi,
Thanks for your time, please help me with the following
Scenario: I have Cube1 being updated from DSO1 with DTP delta, for quite some time. As per new requirement, I would need to create new data mart such that Cube2 gets updated from DSO1.
In order to Configure the delta, I am Considering Following options, please let me know, which one is right one.
Note: DSO1 is in Overwrite Mode.
Create one DTP with update Mode "Delta" , and "Active Table". I knew Delta Changes are captured in change log, but my understanding is, when you execute the DTP for the First time, it fetches the records from Active Table. And from 2nd Run onwards the very "same DTP" without "any changes" get the records from change log, even if we choose "Active Table".
is my understanding is Right?
Do I have to consider deleting the change log, because DSO1 is in Production from quite some time which is in Overwrite mode?
Do I have to create a DTP with Delta and Active Table, run the dtp Once(Init), then choose "Change Log for subsequent runs explicitly
please help me with these. I have reviewed many sap help articles and sdn threads but none of them were helpful. all of them explains, difference b/w active table and change log table, also gives scenarios like use a full DTP and then 2nd DTP with Delta without Data transfer. I am not looking for that kind of details.
Appreciate any help, Thanks again
Edited by: curious maven on Mar 28, 2011 8:35 AM

Hi Uma,
Thanks for your response.
to your question, If I need to load all the data from DSO1 to Cube1, answer is NO. if you read my post once again,
Existing Flow is : DSO1 --> Cube1 (Means, Active Table and Change Logs of DSO1 already Filled Up)
Requirement is: DSO1 --> Cube2. (Need to Init the Delta, and Detlas going forward)
My Questions:
(1) Imagine, DSO1 has 10 requests, so we see resepctive data in Active Table as well as Change Log. As a matter of fact, Data is being updated to DSO1 in Overwrite Mode, so all the changes(10 requests equivalent) would be captured in Change Log, which in turn helpful / used when we do Delta from DSO1 to any Cube, in my case, it used to update to Cube1. As per new requirement, it needs to update to Cube2.
My assumption is, if I choose "Active table and Delta in Extraction Tab" in DTP, During First Run (Delta Init), Data would be fethed from Active table. And the 2nd Run Onwards, delta records would be fetehced from Change Log automatically, even if we don't change the selection from Active Table to Change Log.
Is My Assumption Right?,
in this process, Do I have to Delete Change Log
(2) Do I have to Explicitly change DTP setting from "Active Table to Change Log" Once Delta Init has been run with setting "Active table" inorder to get Deltas from DSO1 --> Cube2 ?
Appreciate your help
Edited by: curious maven on Mar 30, 2011 3:14 PM
Edited by: curious maven on Mar 30, 2011 3:29 PM

Change Log Details for the Planning Profiles in CRM

Hi All,
We are getting the Planning data from CRM Planning Profiles into BW BPS - 0CRM_C01 Real Time InfoCube.
The Users got a new requirement and they need the following additional details:
1. User who modified the amount in a particular Planning Profile.
2. Date and Time when the Planning Amount has been modified.
3. Differential Amount. (Between Earlier Planning Amount and Planning Amount that was entered now)
In one statement, User needs all the change log details in Planning Amount to be flown to BW and saved so that he can report.
How to create this setup.?
Can the same Real Time InfoCube 0CRM_C01 be used to save this information ?
How to configure the system in Planning Layouts to capture User/Time Stamp/Amount Details.
Any inputs in this regarding will be greatly appreciated.
Regards
RY

Hi Kumar,
Upload com.sap.logon.runtime.par(logon page .par file) into the portal.
problem will be solved..
regards
Nizam

Change log level for exit activity in BPEL

Hi,
Everytime my BPEL process reaches an exit activity it throws a WARNING log message saying:
"The process instance has been terminated because an exit activity was encountered."
This is not an error and should therefor not be logged at WARNING level. How do I change it to be INFO or any other level?

In terms of access, I believe the audit files generated from the agent are created with full access to the entire portal, and I don't believe there is a way to restrict it to certain section apart from doing manipulation on the .log files that are exported.
The process of creating the archiving agent involves going into the Audit Manager utility from the Admin section, and then you'll see it in the middle of the Main Settings page.
I hope that helps.
user5817265 wrote:
Thanks Geoff. I knew I overlooked something simple.
Is the owner the person who created the archive file? What controls who creates it?

Order Change Mappping Missing for ECC SRM Integration

Hello XI Experts,
We are using ECC-XI-SRM SUS for PDP scenarion.
We have uploaded the contents and find that no message mapping program exists for Order Change -- that is ORDCHG.ORDERS02 idoc to SRM.
However there is a Interface mapping but it refers to the same mapping program as that for Order Create -- ORDERS.ORDERS02 to SRM.
Can You please let us know , if you faced this as well or not ... and what should be our course of action now.
Thanks,
Mani

Anand ,
can you let us know one more thing..
For ECC-XI-SRM integration all the conents are readymade...
What else do we need to consider... like Alert config etc?
Cheers,
Himadri

Change log issues-2 images for a single requests

Hi ,
in change log table for a single request i found 2 before images and two after images, is this normal behaviour if not when can we see the such type of scenarios.
because it leads to zero records when it isn updated in to the further data targets.
thanks.

the listener is NOT involved with any existing session.
stopping & restarting the listener has NO impact on existing sessions.
I suggest it is better to control network access to any system using a Firewall which is the best tool for this task.
Yes, it is possible to have more than 1 listener. It is also possible to poke yourself in the eye with a sharp pencil.
I suggest that you should avoid both of these possible activities.
Simply put having multiple listeners is wrong for multiple reasons & should be avoided.

Change logs not available for tables

Hi Experts,
Is there any change logs available for the tables PCEC, FTXP, T030
We need to add logs so that we can keep track of the changes.
Please let me know if someone knows the solution.
Regards,
Srinivas

Dear Srinivas,
Go to SE11 and key in your table, then select Display.
In the top, you will be able to see Technical Settings Button. click on it.
It will show you the technical details for that table.
There will be an indicator at the bottom LOG DATA CHANGES.
If this indicator has been set, then only the changes will be recorded.
For change log, you shall make use of the transaction SCU3.
AUT10 shall also be used.
thank you
Venkatesh

Change logs not working for manual update modify/delete statements.

Hi experts,
                 My requirement is to display the change logs for a few custom z tables.The log data changes is selected in technical settings of the table.When any changes are made to the table using sm30 the changes are logged.
My requirement also displays an alv grid which allows the users to edit/insert/delete   entries in the table.
In this case the change logs are not getting recorded(ie whenever the user manually updates or inserts a row into the table the change docs are not getting stored).
My code works like this,
Whenever the user chooses a custom table and selects the display change log button i transter the control of my abap program to the standard rsvtprot program(sap std. pgm to display change logs).
sample code:
elseif sscrfields-ucomm eq c_chgdoc.
    refresh:r_seltab.
    clear:r_seltab.
    r_seltab-sign   = 'I'.
    r_seltab-option = 'EQ'.
    r_seltab-low      = w_tab.
    append r_seltab.
Call the sap standard program rsvtprot via selection screen
by passing the table name and display grid parameters.
    submit rsvtprot via selection-screen
                      with cusobj   in r_seltab
                      with alv_grid eq c_x
                      and return.
Is there any way by which i can extend the change logs functionality for the changes made using the alv grid?
Please help me out.

Hi Anuraag,
In TM you should open the transaction /SCMTMS/ZONE. Here you select the zone you would like to modify and you execute the changes you would like to make.
Regards,
Nico.

Activate change logs for the table V_T007K

Hi,
Change log check box is activated in table and change logs is activated in system. But still I am not able to view any change logs recorded for the table V_T007K using SCU3 transaction.
I tried by changing some data and than checked the SCu3 transaction. nothing is recorded against the table.
Please let me know what needs to be done to capture the change logs for the changes done to the data in the table V_T007k table.
Thanks in Advance.
Thanks & Regards,
Madhuri.

Hi
The table u mentioned V_T007k is not a transparent table
.its a view only for views u cant track changes.
But only for transparent tables u can only track changes thru SCU3
Also u can find the changes in a table from SAP TABLE
CDHDR and CDPOS.
if helpful reward me points.
Regards
Manas Ranjan Panda

How to get change log for fields if change document flag is not maintained?

Hi experts,
My requirement is display the change log details for the transaction FAGLGA32.
In this transaction we have the Field Groups block.if any change is happened for field group we need to capture the change.
the field for the field group is RKAL1-FGFLG1 and the data element is FGFLG.
In the data element FGFLG, the flag CHANGE DOCUMENT is not maintained.
How to get the change log details for the fields for which the change document flag is not maintained at data element level?
Regards,
Ramesh

do a modification for the data element or try Audit Trail (depends on your release)
    Audit Trail (electronic records) / Tx AUT10, AUT01, XX-PROJ-ELR, OSS 564743,517613,564645
        Note 1058984 - FAQ: Audit Trail (Transactions AUT01-AUT10)
        http://help.sap.com/erp2005_ehp_03/helpdata/DE/fc/89683c1b5fb712e10000000a114084/frameset.htm
cheers
carsten

Error while Changing log level in Agentry 6.0.44.1

Hi ,
I am trying to change the log level from the Agentry Administration client, but i am getting the below error message.
And it is showing any option to change the log levels for users. How can I change log level for users also.
How can I resolve this error.
Regards,
Shyam

Shyam,
This is fixed or planned fixed in 6.0.46 Agentry Server (supposed to be available anytime soon in the Service Marketplace - it was submitted already to the SMP team). The fix was in SMP 2.3 and SMP 3.0 but it was ported back to the Agentry 6.0.X release. If you have no access to the Agentry 6.0.X patches this means that your SAP License is preventing you from downloading it. You may need to contact the SAP CIC (customer interaction center) group.
Or you can do the manual setup for a workaround for now.
SAP KBA article: 2048202 - AgentryGUI does not allow to change log settings - Not all setttings were successfully changed.
Regards,
Mark Pe
SAP Senior Support Engineer (Mobility)

How to delete Change log data from a DSO?

Hello Experts,
I am trying to delete the change log data for a DSO which has some 80 Cr records in it.
I am trying to follow the standard procedure by using the process chain variant and giving the no.of days but somehow data is not getting deleted.
However the process chain is completing successfully with G state.
Please let me know if there are any other ways to delete the data.
Thanks in Advance.
Thanks & Regards,
Anil.

Hi,
Then there might something wrong at your Chang log deletion variant.
can you recreate changlog deletion variants and set them again.
Ty to check below settings with new variant.
Red mark - won't select
Provide dso name and info area, older than and select blue mark.
blue mark - it will delete only successfully loaded request which are older than N days.
Have you tested this process type changlog deletion before moving to prod per your data flow?
Thanks

Change logs missing for OB52

Similar Messages

Maybe you are looking for