Change MAC Address On AirPort Extreme

I'm using the latest Apple AirPort Extreme 802.11n (Apple Part Number MB763AM/A and Model A1301 as noted on the box). I am currently using Firmware 7.5.1. I haven't yet updated to the latest AirPort Base Station Firmware 7.5.2.
Is there a way to change the MAC Address on this device? The reason I ask is because I use cable Internet and releasing and renewing the IP Address on cable never works. You're basically stuck with the same IP address for months on end unless you leave your connection off for at least 72 hours or more (DSL out here works differently - you get a new IP Address immediately after releasing and renewing).
I don't like using the term "spoofing" as it sounds as if you're trying to do something devious (which I'm not) but I just don't like having the same IP Address for months on end since I don't think it's wise for security reasons.
I'd be interested in knowing if there is a way to change the MAC Address of my AirPort Extreme, perhaps using a third-party utility of some sort, perhaps through the Terminal or maybe the new firmware update allows you to finally do this?

Is there a way to change the MAC Address on this device?
If you are referring to the MAC address of the AirtPort Extreme, it is not possible to change this.
You're basically stuck with the same IP address for months on end unless you leave your connection off for at least 72 hours or more (DSL out here works differently - you get a new IP Address immediately after releasing and renewing).
The IP address you are referring to here is assigned by your service provider. The AirPort Extreme has no control over this.
I'd be interested in knowing if there is a way to change the MAC Address of my AirPort Extreme, perhaps using a third-party utility of some sort, perhaps through the Terminal or maybe the new firmware update allows you to finally do this?
Sorry, not possible.

Similar Messages

Is it easy to block a mac address on airport extreme?

I have plans of changing my router to an apple airport extreme. Is it easy to block a mac address on apple's airport extreme?

So you can just control the time that they're connected.
You can set up daily time limits to allow a specific device to connect at the times that you specify. It is possible to set up different "rules" for each individual device......so your Mac could connect anytime, but other devices connect only at the times that you specify.
It is also possible to set up a rule to not allow a device to connect at all at any time. That would be called the "No Access" rule.
In order for the PS4 to connect automatically, a router needs to have UPnP service. The AirPorts do not have this. If you want to connect the PS4 to the AirPort, you will need to plan to set up the port mapping manually.

Trouble connecting 1 of 3 macs to my airport extreme thumb drive!

I'm not good at using the terminal so I leave it alone. The other 2 macs in the house can hook up to my thumb drive hooked up to my airport extreme. This Imac won't and I get an error saying that" the text entered does not appear to be a recognized URL formant". I am using the correct address afp://10.0.1.1 . I get a message that my mac does not recognize the url and that they normally start with the prefex afp (which mine does). 2 other macs in the house pick it up perfectly.I ran repair permissions and it said that the following errors could not be fixed
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.
I think I'm on to something but I don't know how to repair these files, especially the first one. Any Ideas?

Hi Shadow99999
Did you ever resolve your issues with disconnection between your Mac Pro and Airport Extreme? I am having a similar issue.
I have had the extreme for about 4 months and I loose access to the internet about once a month. When I try to troubleshoot the Airport Extreme it is usually inaccessible from my Mac Pro which is my wired access point. The Airport Utility times out with a network error number that unfortunately I did not write down. The light is still green but nothing seems to be working. The first time I tried plugging and unplugging ethernet wires and accessing wirelessly through a Macbook but now I just unplug the Airport Extreme and replug (a Microsoft solution with no problem resolution.) Today I had some unusual internet traffic on my DSL modem and I wanted to look at the Airport Extreme but again I was unable to get to the Airport Extreme with the Airport Utility on my MacPro. (Everything up to the latest rev. per software update.)
The lack of access between the Airport Extreme and a wired computer is really frustrating and may drive me back to my trusty five year old Buffalo Airstation. I could at least log in when I suspected there was a problem. Loss of internet access with the Buffalo was down to maybe once every 6 months to year and lock ups to wired access even rarer.
Any other thread that you found to help you resolve your problem?
Message was edited by: Karl Seibert

What is Router Address in Airport Extreme

I am trying to configure Airport Extreme for Cable modem(Comcast). Please help me on what i need to fill in Router address field for 'using DHCP' option.
Can I see the address in Airport extreme itself or is it is referring to any IP or something.

I was having problems connecting the Time Capsule to our Roadrunner modem. Time Capsule gets the IP address from the cable modem, but you have to convince the modem to accept that its router has changed and it needs to re-assign the IP address. One way is to turn the modem off, wait a bit, and turn it back on.
For me, suggestions to power off the modem didn't work. But this was because the modem works for our phone service, too, and it has battery back-up. Unplugging the modem never forced it to reconnect.
What worked was disconnecting the modem from the cable. I unscrewed the F-connector (antenna cable) from the back of the modem, waited a few minutes, then reconnected. I got a green light!

Can't change MAC address of my wireless card on Windows XP

Dear Forum Members,
I have recently bought a notebook, Lenovo IdeaPad G550L (I haven't found section for the G series here on the forum) and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly changed MAC address. I installed the recommended driver, available from Lenovo's website, version 5.10.38.14. I tried the common way to change the MAC address, went to Control Panel -> Network Interfaces -> Broadcom Wireless Network Adapter -> Configure... -> Advanced -> Locally administered MAC address, and changed it to a different address (without ":" or any separator characters). Unfortunately this common solution won't work at all. Although, no error messages are produced when changing it (so it seems successful) my wireless router shows me the original MAC address of my integrated wifi card. Tried to restart my computer, my router, everything.
* Tried different drivers, downloaded a driver from HP which had a separate wireless configurator, Broadcom Wireless Utility. It worked like the driver from Lenovo (except this one hasn't got the utility), but I was still unable to change my MAC address.
* Tried a different driver from SoftPedia, version 5.10.79.14 (this is newer than Lenovo's), it didn't work either.
* Tried Nathan True's MACShift utility. It seemed to change the MAC address, but my router showed the original, so it didn't.
* Tried to look for official Broadcom drivers on www.broadcom.com but found nothing for BCM4310.
* Finally, I booted my alternative OS, the latest Ubuntu Linux, and used the kernel driver b43 for my wireless adapter. I tried to change my MAC address using the command ifconfig wlan0 hw ether .... and connected to my network. It worked, my router showed the changed MAC so the hardware (or the firmware) is capable of doing this by the right driver/firmware.
I tried to address Broadcom with the issue, sent them a letter like this post they replied that they are not competent, they wrote the following (I guess this was an automatically generated message because it got back in 10 seconds ) from [email protected]:
"As the chipset supplier, Broadcom provides driver support to our customers - the manufacturers of wireless devices - that ultimately provide products to end customers, such as wireless LAN vendors, cable modem vendors, and notebook providers. It is up to these manufacturers to provide product-specific drivers and software support to their end customers. Please contact the manufacturer of your wireless device for their current drivers"
Then I addressed Lenovo with the problem, their answer:
"Dear ******,
Thank you for contacting Lenovo, the makers of ThinkPad and ThinkCentre products. As I understand, you have purchased a Lenovo IdeaPad G550L and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly change MAC address.and you would like to know is there an official driver for Windows XP that allows you this basic feature like b43 in Linux. We apologize,Please do speak with our Idea pad technical Team at 877-453-6686 Option 1-2-1-2 for further assistance.
If you have further questions or concerns, please feel free to contact us at 866-42-THINK (84465) option number 2. We will be happy to assist at that time.
Once again, thank you for contacting Lenovo.
Sincerely,
Lenovo Websales/CustServe"
So this means I should call them and spend extra money for phone bill of international calls because of their fault of providing a basic feature that is to be expected from every single wireless card in the market. Should I believe that a guide over the phone is more efficient than a step-by-step solution or a link to an alternative driver? I'm getting kind of disappointed. At least they have understood (or copy-pasted) my problem, dutch comfort though.
Any ideas? Anyone experienced the same problem and solved it? Is there an official (or even unofficial) driver for this device for Windows XP that allows me this basic feature (like b43 in Linux)?
Thanks in advance,
str4ngS

Yes, I have posted this thread to different forums after I realized that Lenovo "customer care" is not likely to help me out and even wirelessforums.org members couldn't come up with any ideas for days, that's why. I have already written that helper applications like SMAC (or etherchange or macshift) don't work, because they do the same thing in the system as I change it in the driver panel, so they use the same method which simply does not work.
Locked? Definitely not. If yes, why can I change the MAC of my adapter under Ubuntu Linux using b43 open-source driver if it's really locked? Or you mean it's locked from software, because Lenovo or Broadcom didn't want their users to change their MACs or they just forgot to release a fully-functional driver? Well, then I would like to have a driver in which it's not locked, because this is a basic feature of my adapter of which the hardware is capable.
I have already contacted Broadcom, see their (automatically-generated) answer in my initial post, but I will try to do that again with more foresight.

Changing MAC Address

Recently i have been trying to change my Router's MAC Address. I have a WRT54g v.3. I have done it before where i had unplugged the internet cable going from the wall to the modem. I saw the change on the 192.168.1.1 status page. And i noticed with a proxy and the new changed MAC address i was able to get into gaming servers i hadn't been able to before because my IP was banned.
Now when i try to change my MAC address, it doesn't seem to change on the router stautus page like it did once before. I'm sure that it's possible to concel my identity of my old IP and get a new IP (through a proxy), many people do this for security reasons so i'm hoping linksys products can offer some kind of security by doing this.
btw, sorry about the name, if it's possible can it be changed to Joe. Thanks guys.

Your MAC is "stuck" to that router, you need to spoof it. Google it.

I would like to change Mac Address of Ethernet only without card change

I would like to change Mac Address of Ethernet only without ethernet card change.
Please let me know how to change Mac Address.
It's need to keep internet security.

I question why you want/need to also, but it can be easily done...
http://osxdaily.com/2008/01/17/how-to-spoof-your-mac-address-in-mac-os-x/
http://whatismyipaddress.com/change-mac

I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme ??

I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme ??

The first important thing to consider here is that Apple does not support Time Machine backups to a drive at the USB port on the AirPort Extreme, so that may likely have something to do with your difficulties.
If you want to continue to try this, the drive must be formatted in Mac OS Extended (Journaled) and you almost always have to use a powered USB hub with a drive at the port of the Extreme...even if the hard drive has its own power supply....because the port on the Extreme is under powered.
Most users who try this unsupported method have corruption difficulties sooner or later, but we do hear from some users who seem to be able to make it work.
The bottom line is that there is no support from Apple on this if you have difficulties, so you may want to consider a secondary backup plan for your important data.

How to change mac address on mac

i'm sry i'm not sure if this is the right section or not but yeah.... nyways does anyone know how to change mac address on a macbook?

If you have not updated your OS you can use the following command.
sudo ifconfig enX ether xx:xx:xx:xx:xx:xx
You will need to replace the X with your network number and the xx:xx:xx:xx:xx:xx with the mac you want to have.
Then run
sudo ifconfig enX down
sudo ifconfig enX up
This change will last till your next reboot.
cheers
NOTE: This is not working in 10.5

How to change mac address on time capsule

Hi there,
How to change mac address on time capsule?

There are routers that allow you to create/clone a mac address to whatever you like. Since many companies use the mac address to 'register' a unit connected to it's system, you usually just have to let them know you've changed your router and they will reset your system to accept connections from the new device.

How to change mac address on wrt54g router

How to change mac address on wrt54g router?

are u sure u wanna change the MAC of the WRT54G ? it's not possible....you can however clone the MAC address of your PC onto the router...depending on your ISP.

New help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd

new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd would like 2 store my home videos and pictures on the time machine (ONLY) as the MAC AIR has storage space limited space please help. THANK YOU.

See the info here about sharing or using the TC for data.
Q3 http://pondini.org/TM/Time_Capsule.html
It is extremely important you realise.. the Time Capsule was never designed for this.
It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..

Airport Extreme changing MAC address

I have a very frustrating situation. One of the UFO airport extremes on our network is spontaneously changing it's MAC address. In the server logs, there is a message that IP address "xxx.xxx.xxx.xxx moved from MACaddress1 to MACaddress2". The IP address is for the airport base station and one of the MACaddresses is the WAN port of the of the base station. There are times when the MAC address changes back and forth several times in a span of a few minutes. Needless to say, this is causing severe problems with our wireless network.
I have flushed the routing table on our servers. I have done a hard reset and reconfigured the base station.
Let me know if more information is needed.
Any assistance would be greatly appreciated.

cdated, Welcome to the discussion area!
Since there is no way to change the MAC addresses used by theAirPort Extreme base station (AEBS), I would suspect that another device is acquiring/using the AEBS's IP address.
Have you tracked down the device/port using this 2nd MAC address?

I need to change the MAC Address for Airport on MacBook

I have a specific need to change my son's Airport MAC address as his school requires the use of USB network cards that aren't compatible with MACs. These cards are needed because the school's router uses MAC address filtering.
Before we upgraded his Mac to Snow Leopard, we were able to change the MAC address to the MAC address of the useless dongal the school supplied. We basically created an AppleScript program that ran the "sudo ifconfig en1 ether xx:xx:xx:xx:xx:xx" and all was good.
This command no longer works for changing the MAC address. We tried it as root user as well and by typing it into the terminal window as root. After running the command, we can run "ifconfig en1" and it does display the new mac address but when we turn the airport on and try to connect, it just hangs and won't connect.
Our other non-Snow Leopard still works fine after running the commands so I'm guessing Apple disabled this functionality. It's hardly a security issue by being able to change your mac addres.
Is there a new way to accomplish this? I've searched everywhere.
Thanks!

Would an easier solution be to provide the school's IT admin with your mac address and have it added? If they can add a block of mac addresses for the usb dongles, they can add more for machines that cannot use the dongle.
Also: "It's hardly a security issue by being able to change your mac address."
While it may not be a security issue for your machine, it is a security for the school network who is using mac address filtering as hopefully only one part of their wireless security.
That being said, have you read this?
http://osxdaily.com/2008/01/17/how-to-spoof-your-mac-address-in-mac-os-x/

How can I change my IP address in airport extreme?

I have an airport extreme and I would like to change the IP address. There is a renew DHCP tab next to IPv4 Address in Airport Utility, but if I click it doesn't change anything. I'm very green on IP addresses, how can I change the IP address?

I am currently connecting using DHCP. The reason I want to change my IP address is for security.
I see, thanks for the explanation.
Every time you connect to a website, any website, your IP address is sent along with the content you request. There is no avoiding that. It's the method by which the content is delivered to you, analogous to a return address on an envelope you send in the mail. It's not required for websites to maintain a log your IP address or the content you requested. Most of the time it's discarded.
That IP address sent with your web page request is the address of your ISP's router - not your AirPort Extreme. Its address can be used to identify only a broad geographical area, and only your ISP will know the location of the specific equipment it's using. To truly obscure your location from even that broad category requires connecting through a web proxy server, of which there are many to choose from. The only IP address that could be "tracked" using one of them could be anywhere around the world, and would change so often as to be useless to anyone wanting to locate you.
In any event specifying a fixed IP address for your Extreme will not accomplish anything in the way of security or privacy, and would be no different than using DHCP.
If you are concerned about privacy in general that is a very wide-ranging subject. I'll start by suggesting you avoid Google and all its products and services, for obvious reasons.

Change MAC Address On AirPort Extreme

Similar Messages

Maybe you are looking for