Change .mac username half way through iweb project !!!

Hi
Now that I've finished my site I want to register my trial .mac account and change the username in the process. My question is, will this change of username cause problems now that I've already built the site?
Cheers
Jim

Well Jim,
If you decide to choose another .Mac name, all you have to do is enter the new information into your System Preferences .Mac panel. iWeb will get the new information from there. Of course, you will have to republish your website to this new .Mac account, but aside from that things will be as they were. Your other .Mac trial account will "expire" and your website there will go away...no problem.

Similar Messages

  • Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you helpe me change this back please?

    Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you help me change this back please? Has anyone had this issue before?

        I'm sorry to learn that you have endured the audio issues outlined in your post for almost 2 years SusanLM1! This is certainly not normal! Let's get to the bottom of this issue, first please confirm your phone model; your mention that you have the iPhone 5 but your post is on the iPhone 5S forum. Also, share the iOS version currently installed on your phone. What is your ZIP code? Does this happen mainly while you make/receive calls from a particular location (home, office, etc)?
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

  • Half way through update and shuts down?

    My mac gets half way through an update and then shuts down, suggestions anyone?

    Hi WSMW,
    If you are having issues with an OS X update, you may want to take a look at the troubleshooting steps in the following article (it specifies 10.6 and earlier, but the steps should be similar for all OS updates):
    Apple Support: Troubleshooting Mac OS X installation and software updates (Mac OS X v10.6 and earlier)
    http://support.apple.com/kb/TS1394
    Regards,
    - Brenden

  • Footage fades a little bit half way through interview, how do I fix?

    Greetings!
    I'm working on a Doc that has interviews with Celebrities, one of the interviews is with Linda Evans and about half way through the interview the lighting fades a little bit. It's just a gradual fade, happens over 10-15 frames, but it wasn't me that did it. Perhaps the camera man changed the Aperture or someone dimmed the lights. Either way, it's noticeable and I was tasked with fixing it. Ugh!
    http://youtu.be/FDWA2wLUjtw
    Anyway possible to do some sort of correction using FCP to fix it or am I pretty well up the creek? Any advice would be *huge* as this is a major project and will be playing on the PBS channel KLCS in LA this Spring so I'm going all out on this one. Thanks in advance!
    Best Regards,
    Matty

    APply the 'brightness and contrast' filter to the clip. then go into the clip and you should be able to keyframe the filter. (I don't have my mac in front of me to verify, sorry)
    Another way is to use the blade to cut the clip right where it starts to fade. APply the brightness and contrast filter to the darker part, brighten it up a bit and if you fiddle just right you can adjust the brightness seamlessly.
    Another cheaters way could be to cut to any B roll or another angle during the fade. Depending on how dramatic it is people may not even notice the difference, or you can make any alterations and they won't see them because they won't be able to remember just how bright it was before.

  • My ipod stops half way through step 1 when I am syncing

    I[od touch stops half way through step q which i backing up

    I would try moving the existing backup to a safe place since there may be some corruption that is causing the problem.  The backup file is located hre:
    The folder where your backup data is stored changes depending on the computer's operating system. Since iTunes only keeps one backup per device, you should ensure the backup folder is included in your periodic data backup routine.
    iTunes places the backup files in the following places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP,  Windows Vista and Windows 7).

  • Some songs end half way through

    I have an 80 GB iPod. I bought it new and originally formatted it for Windows and connected it to iTunes in Windows. I later bought a Mac, reformatted the iPod for Mac and had iTunes copy all my song files to it again. Most of my music collection are MP3 files that I personally ripped from CDs, using a few different programs and encoders.
    The problem I am going to describe has occurred on the iPod under both formats, and over multiple iTunes updates.
    There are some songs on my iPod that it will not play to the end. What happens is that about half way through the song, the song stops, and the screen indicates the song is paused with two (2) seconds remaining. It ALWAYS says two seconds remaining, regardless of how much time was actually left in the song. I can use the next song button to get to the next song, although it takes a few seconds longer than normal for the iPod to start playing again.
    There are only a handful of songs I've identified so far that this happens with. For any song that this happens with, it ALWAYS happens; in other words, it's not that the song sometimes plays through and sometimes doesn't; if it happens at all, it always happens.
    The particular songs that I've identified so far play fine in iTunes on the Mac. Back when I used Windows, I noted that the problem songs from the iPod would play fine in Windows iTunes or in other Windows media players.
    So far, I have only thought of two solutions to this problem. The first was to uncheck the song and sync the iPod so as to remove the song from the iPod, then recheck it and sync again, so as to recopy the song to the iPod. This did not help. I even tried unchecking, syncing, checking some other songs and syncing, then rechecking the problem song and syncing again, so as to ensure that the song file got copied to a different physical area on the iPod's hard drive, but to no avail; the song still would not finish.
    My second solution was to re-rip the song from the CD, replace the file in the iTunes library, and resync the song to the iPod. This worked. So of course it seems that I should just do this, but it's inconvenient for several reasons. One is that I have a lot of my CDs stored away, or no longer have access to many CDs I've ripped from because they belonged to friends or family members. Also, this is really just brute-forcing the problem; it isn't really fixing anything.
    Has anyone ever had a similar problem, and if so, did you come up with any other fixes or do you have any other suggestions?

    Yes, in theory re-converting would lessen the quality further. However, I have heard people claim (unsubstantiated) that if you are encoding with the same encoder at the same bit rate, then since it will use the same algorthymn, it won't really change the file. I have absolutely no idea if that is true or not.
    But... I figure some slight loss in quality re-encoding is still better quality than a song that only plays half way and then stops, right? I suppose you could always tag those files in the comment section with something like "Re-Encoded" and then later if you gain access to your old CDs, you can then make a Smart Playlist to gather those songs and then re-rip them again from your CDs.
    Cheers,
    Patrick

  • I was updating my iphone, but my computer shut down half way through restoring my old settings. When I turned my computer back on, i tried to continue with the restore but the original backup i was trying to use wasn't there anymore, it had been replaced.

    I was updating my iphone, but my computer shut down half way through restoring my old settings. When I turned my computer back on, i tried to continue with the restore but the original backup i was trying to use wasn't there anymore, it had been replaced.

    Try resetting the SMC.
    MacBook and MacBook Pro with a battery you can remove
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer
    To reset the SMC on newer Mac portables with a battery you cannot remove
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.  
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • I recieved a notice that there was an update for Elements 13 but when I try to install it it stop's half way through then I get the error message that "updates could not be applied" I have tried several times and it continues to give me the error. What is

    I get a message that an update is available and when I install it the update stops half way through and I get the error code: U44M1I210 for Camera Raw and Elements 13.1 updates. I get the message "UPDATES COULD NOT BE APPLIED" Can someone help with this? Thank you. David

    drmeyers381
    Thanks for the follow up.
    Is your Premiere Elements 13 on Mac computer?
    I have not seen much in the way of alternatives coming from Adobe on the Premiere Elements 13.1 failed updates.
    But there seems to be several discussions on U44M11210 in the CC products...one
    Update failure. (U44M1I210) | Adobe Community
    You could try the uninstall, free ccleaner, reinstall with antivirus and firewall(s)  and then try for the Help Menu/Update for 13.1..
    If Mac, https://www.piriform.com/mac/ccleaner
    If Windows, CCleaner - PC Optimization and Cleaning - Free Download
    The CC people seem to have the advantage of an online download of their update as well as the one via the Help Menu/Update.
    Premiere Elements does not have that perk - update only via Help Menu/Update.
    Please review and consider and please let us know of your progress as your schedule permits.
    Thank you.
    ATR

  • My iPod is playing songs half way through and not at the beginning?

    Okay, so I will be listening to a song like "Yellow Submarine" by The Beatles and will get the urge to change the song to a different band and song half way through of listening to it. After listening to the new band and song and like a month goes by I will go back to The Beatles song and it will begin where i left off and not in the beginning like it used to. How can i fix this because it makes me mad that it starts half way through and not in the beginning?

    Hello uhmcookies,
    And welcome to Apple Discussions!
    I believe the "Remember playback position" is enabled for these songs in iTunes. This option will ensure that wherever you leave off in a song is always where it will be picked up off at. This is a nice feature for audiobook tracks, but not music.
    Anyways, you can disable it by removing the check mark next to this option from under the track's Options tab in iTunes. You can access this tab by right->clicking on the track and choosing "Get Info" from the menu.
    Hope this helps.
    B-rock

  • My music quality drops half way through - wave file, is there a way to make an improvement

    My music sound quality drops half way through - its a wave file, is there a way to make a the other half as good as the first half?

    Firstly can you tell us what sort of drop in quality in you are experiencing? Is this music that you have recorded yourself using Audition or is it imported from somewhere else? Without knowing what has happened to it it is impossible to say if any improvement can be made.
    If it is audio that you have recorded and edited in Audition you must have done something to it to make it change half way through. You will probably need to go back a few steps in your editing process to recover the sound.

  • Can't hear long notes when played half way through

    This is probably a common problem/question.
    I often have very long sections with a single continuous chord (in this instance ‘dynamic swell’ ‘extra cello sect legato’ and ‘tonewheel organ’)
    My problem is that to check edits on small sections of a composition I have to go right back each time to where the aforementioned chord begins in order for it to be heard. if I put the playhead half way along the chord it doesn’t play. Is there a way that the playhead can pick up on notes half way through?  I’m sure this has been dealt with dozens of times on this forum but I could only find one post from 2010 that I couldn't apply to Pro-x.   Thanks!

    In LPX you need to turn on the Chase functionality
    This is done by going to the Project Settings menu (Not Logic's General prefs)
    LPX Menu Bar > File > Project Settings > Midi > Chase tab
    I have mine set up as thus...
    You may not need to or wish to turn on everything I have selected.. Play around and see what works best for you and your own method of working in Logic.
    The specific function for playing sustained notes half way through is the first option (Notes and Sustained)
    Note: This is a per Project setting and so only applies to that project and not any others.
    Therefore...
    I suggest you create a new project, set up chase and then save this blank project out as a template you will then choose and open each time you create a new project from now on...  You new chase settings (alone with any other settings you wish to use in every new project) will then be setup of each new project you create. For any older projects you need this functionality in... you will have to set up chase for each one and then save.

  • Creative Cloud Installer gets half way through downloading the desktop app then just disappears, without downloading, why is that?

    Creative Cloud Installer gets half way through downloading the desktop app then just disappears, without downloading, why is that?
    I have recently purchased a student subscription to the 'complete package', my credit card was charged.  Then I download the Creative Cloud Installer from the website, that's fine, then I double click the Creative Cloud Installer as per instructions, it starts downloading the desktop app, but only gets to about halfway then just disappears. 
    I've tried using both safari and chrome, restarting my computer, but neither has worked.
    I have noticed that the website will not keep me logged in for long either, it keeps switching to BUY instead of DOWNLOAD. 
    Any ideas?

    Please read, and reply back here with information https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • I have recently purchased a refubished imac 3.06 ghz intel core 2 duo and I'm trying to install logic 7.2 on this machine. I get half way through the content install and it crash's  . I have it installed on an older Imac and it works fine.  Is there any e

    I have recently purchased a refubished imac 3.06 ghz intel core 2 duo and I'm trying to install logic 7.2 on this machine. I get half way through the content install and it crash's  . I have it installed on an older Imac and it works fine.  Is there anybody out there that can help me figuire outhow to make this work?

    See:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    Macintosh OS X Routine Maintenance,
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, 
    Five Mac maintenance myths, and
    Myths of required versus not required maintenance for Mac OS X for information.

  • Audio doesn't match video because repeated half way through

    Hi guys,
    I am currently editing videos from my Canon SLR with Adobe Premiere Elements (Windows).
    In the same project, I have only uploaded videos taken the same day with the same equipment. I have been able to process them all normally apart from one. For some reason, when I play this file with a basic video player, everything works fine but when I import it in the Adobe software and play it either through the small window or in the timeline, I have the same problem:
    Everything works fine (audio and video in sync), until it reaches a specific point (totally random as far as I can tell) when the video keeps going but suddenly the sound repeats itself from the beginning of the file (and the audio which would correspond to the video is replaced by it). For you to understand better the problem:
    Video:   ABCDEF
    Audio:   ABCABC
    I have tried opening it in a different project and somehow it happens exactly at the same point.
    I am totally clueless of what it comes from and getting really frustrated!
    Any idea?
    Cheers
    Babs

    Hello, I'm new to using forums like this.  Is it appropriate for me to post that I'm having the same issue?  Also sounds similar to Audio doesn't match video because repeated half way through as well.
    My situation is:
    Win7 64-bit, i7 920, 2.67GHz, 8GB RAM
    Multiple Nikon D7000 video clips I've taken play back fine except for the following clip.  In Windows Media Viewer, I have no problem, but in PE10, in the timeline editor, this clip repeats the audio from the beginning starting about 6 minutes into the video.  I have Quicktime version 7.7.5 installed which I noticed was mentioned as a possible culprit in the other thread.
    I've been using my camera primarily for stills, but decided to have my mom tell her story before she wasn't able to.  I'm so frustrated with this problem because I know the audio is just fine since I can play it back synchronized throughout the entire clip in WMV.  I've tried cleaning out PE caches as best I can figure them out and created new projects without any better luck.
    Any help would be greatly appreciated.  I'm open to getting a new version of PE or another program if I could believe that I wouldn't run into this issue again.  This seems like such a vanilla problem since all my other clips seem to be fine and this one does too on WMV.
    Thanks for any help you can provide.  I don't really know where else to go to figure this out.
    Joel
    My Premier Elements Project settings are:
    Editing Mode: DSLR
    Timebase: 23.976frames/sec
    Video:
    Framesize: 1920 x 1080
    Pixel Aspect Ratio: Square Pixels (1.0)
    Fields: No Fields (Progressive Scan)
    Display Format: 24fps Timecode
    Audio:
    Sampe Rate: 48000 Hz
    Output from MediaInfo
    General
    Complete name                            : Z:\NikonVideo\MomsStory\JDB_20140702_6537.MOV
    Format                                   : MPEG-4
    Format profile                           : QuickTime
    Codec ID                                 : qt 
    File size                                : 1.46 GiB
    Duration                                 : 10mn 32s
    Overall bit rate                         : 19.8 Mbps
    Encoded date                             : UTC 2014-07-02 18:22:46
    Tagged date                              : UTC 2014-07-15 03:24:05
    NCDT                                     : NCTG
    Video
    ID                                       : 1
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : [email protected]
    Format settings, CABAC                   : Yes
    Format settings, ReFrames                : 2 frames
    Codec ID                                 : avc1
    Codec ID/Info                            : Advanced Video Coding
    Duration                                 : 10mn 32s
    Bit rate                                 : 18.3 Mbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Constant
    Frame rate                               : 23.976 fps
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 0.368
    Stream size                              : 1.35 GiB (92%)
    Language                                 : English
    Encoded date                             : UTC 2014-07-02 18:22:46
    Tagged date                              : UTC 2014-07-02 18:22:46
    Transfer characteristics                 : BT.470 System M
    Matrix coefficients                      : BT.601
    Audio
    ID                                       : 2
    Format                                   : PCM
    Format settings, Endianness              : Little
    Format settings, Sign                    : Signed
    Codec ID                                 : sowt
    Duration                                 : 10mn 32s
    Bit rate mode                            : Constant
    Bit rate                                 : 1 536 Kbps
    Channel(s)                               : 2 channels
    Channel positions                        : Front: L R
    Sampling rate                            : 48.0 KHz
    Bit depth                                : 16 bits
    Stream size                              : 116 MiB (8%)
    Language                                 : English
    Encoded date                             : UTC 2014-07-02 18:22:46
    Tagged date                              : UTC 2014-07-02 18:22:46

  • Photoshop Elements 2 Quits Half Way Through Loading ?

    I installed PSE 2 on my new iMac but when launched it gets about half-way through and then quits with an error message saying there is some sort of terrible problem.
    The actual wording is:-
    "An unexpected and unrecoverable problem has occurred because of a program error. Photoshop will now exit".
    Is this a known problem with this old application ?
    It installed from the CD without a hint of a problem.
    Message was edited by: Ian R. Brown

    Wow! You got yourself a great machine there, Ian. If mine wasn't just a few months over a year old I'd be tempted to go for a nice 24 incher myself .
    PSE4 is nowhere near as fast as PSE6 on our Intel machines. On my 2 GHz machine PSE6 boots up in 11 seconds whereas PSE4 did so in about 25. When loading up multiple pictures at a time PSE4 was pretty sluggish about it (I never actually timed it) whereas when I do that with 6 it does so in a flash. For instance I just now timed the loading of 6 color images and it did so in 3 seconds.
    And yes there are a number of new features with it but for me the speed and responsiveness over PSE4 make it well worth while. I do a lot of image editing and retouching and that's the reason I favor the quickness of response of the application. That said there are also some things that one has to get used to about the new interface. Here's a review about that:
    http://arstechnica.com/journals/apple.ars/2008/03/25/adobe-photoshop-elements-6- for-mac-os-x
    It comes with a manual but I got myself a copy of "Photoshop Elements 6 for Mac: the Missing Manual" by Barbara Brundage which is far more comprehensive and much easier to follow. If you get PSE 6 I highly recommend that you get a copy of it also.
    Rick

Maybe you are looking for