Change Management and Target Group in STMS

Hello, We use the Change Management (SolMan 4.0). Up to now it works fine. We deliver always one client in the System (E33.002; T33.002 and P33.002). Now we try to change this. We will deliver more than one client in every system at the same time (to have always the same status in every client). So we use Target groups in STMS. This works fine if I do the transports manualy. But if I try to do it with the change management it doesn't work. The change management still deliver one client (002).
Can someone give me a hint?
Best regards

Hi Jose,
check below link.
Leads not getting created via ELM
Rgds
Hari

Similar Messages

  • Webinar: Change Management and Transport in the Enterprise Portal

    <b>SAP NetWeaver Know-How Network Webinar: 
    Change Management and Transport in the Enterprise Portal
    Wednesday 21 July 2004
    11 a.m. EDT</b>
    On Wednesday 21 July, Scott Jones hosts the webinar titled <b>Change Management and Transport in the Enterprise Portal</b> as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
    Here’s how Scott describes his webinar presentation:
    “Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments.  This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting.   We'll also look forward to Change Management enhancements coming with Netweaver 04.”
    SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
    <b>How to Participate</b>
    (Please go to the SDN Events page to see the article and download the PDF presentation)
    Dial-in Information:
    Date: Wednesday 21 July 2004
    Time: 11 a.m. EDT
    Within the U.S., call: +1.888.428.4473
    Outside the U.S., call: +1.651.291.0618
    Password: NetWeaver04
    WebEx Information:
    Topic: SAP NetWeaver Know-How Network
    Date: Wednesday 21 July 2004
    Time: 11 a.m. EDT
    Meeting Number: 742391500
    Meeting Password: netweaver04 (lowercase)
    WebEx Link: sap.webex.com
    Replay Information:
    A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
    Toll-free: +1.800.475.6701
    International: +1.320.365.3844
    <b>About the SAP NetWeaver Know-How Webinar Series</b>
    The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
    <b>Disclaimer</b>
    SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

    Hello,
    In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
    SAPnote 727180 - Version of PAR File in Manifest File
    denies this.
    Can you clear this out?
    Kind Regards
    Koen Van Loocke

  • How to define the "target group" in STMS?

    Experts:
    We have a ECC  landscapes with many clients on DEV and QAS.
    The previous basis admin created 2 target groups at STMS.
    The first TARGET  GROUP  has  both DEV and QAS clients as the target systems in its definition.
    The second TARGET GROUP  has only the QAS clients as the target systems--so many QAS clients show up in both Target  GROUPS.
    Could you help explain why we need the second TARGET GROUP  since all target systems in the second TARGET  GROUP already  show up in the first TARGET GROUP.
    Thanks a lot!

    The second TARGET GROUP that has only the QAS clients can be used where a transport only needs to be send to QA systems/clients and not to Dev clients.
    An example would be client independent objects, you don't need to move them to rest of the Dev clients but need to be moved to QA.
    Hope this helps
    Thanks,
    Naveed

  • Minimum steps required for Change Management and Incident management

    Hello experts,
    Does anyone have a check list of the absolute minimum steps required for getting Change Management and Incident management functioning in Solution Manager.
    I just need it to function with creating changes and incidents and be able to assign them, change their status and close them.
    The purpose is to get an idea if this is something for us to use. If we then find it useable, then we will go for a full scale implementation using official guides, education etc.
    I just need an absolute minimum guide for demonstrating the functions, and if you guys have any recommendations, things we should pay special attention to or other experiences feel free to tell me.
    Thanks in advance.
    Regards,
    Kenneth

    Hi,
    There are a number of Blogs in the SDN about Charm and ServiceDesk, explaining first steps and more.
    Check these to start:
    http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
    The Complete ChaRM Solution
    Change Request Management scenario: Usual questions and known errors
    First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
    Regards,
    Jan

  • What is the relationship between Change management and Issue tracking?

    What is in general change management and what is issue tracking in a SAP point of view?

    Hi
    See this thread
    Re: SAP APO
    Additional inputs :
    APO refers Advanced planned and optimizer
    APO is similar to BW in the sense it is also a OLAP processor intended for reporting needs
    Supply chain management
    http://help.sap.com/saphelp_nw2004s/helpdata/en/25/79eb3cad744026e10000000a11405a/frameset.htm

  • Is there a relation between the Engineering Change Management and MM

    Hi SAP MM Gurus,
    Is there a relation between Engineering Change Management and Materials Management? I know we get the versions changes updated in Material Master. But do not know where is the origin for ECM. Step by step configuration is appreciable.
    Thanking in Advance.
    with regards
    Ravi Babu

    Hi ,
    I have created an application and have created end users also who will be using this application. For each of these users i have to give access to application in such a way that they will be able to see only their area a work. So how do i do this ..this needs to done based on the login user_name..my question now is how or from where will i get the current session details like user_name, current session id ,current session date and time?
    Thanks in advance,
    Bhargavi

  • Order Change Management and direct manufacturing technique (SOBSL 52)

    Dear all,
    there is a statement in our SAP development team, that I can hardly believe:
    Order Change Management and direct manufacturing technique are not  fully supported in SAP standard (ECC6.0).
    Can any body help me with this issue?
    Kind Regards
    Bernd

    Dear Bernd,
    please see SAP note 436928, which descriped the restrictions from OCM.
    Regards,
    Sabine

  • Combine Profiles and Target Groups -Segmentation

    Hi Experts,
    I have a requirement where I will need to join profiles with other profiles and Target groups. I checked in help.sap and I saw the following sentence regarding combining the profiles.
    In addition to attributes, you can also combine profiles with other profiles and with target groups.
    Example
    You select a profile from the components area, drag it onto an existing profile in the staging area and choose keep. The resulting profile contains the attributes contained in both profiles as inclusive conditions.
    How do I get the Profiles and the Target groups in the Components area? I can only view the existing Attribute lists. Is there any setting that I have to make to see the existing profiles and target groups ?
    Any help will be greatly appreciated.

    Hi Pooja,
    which version of the product do you use? CRM 2007?
    Scenario 1) I need to combine 2 profiles with an 'OR' condition and create target groups out of the combined profile. How do I accomplish this? Is there any method to combine profiles in the Graphic Modeler?
    => You could have 2 profiles in a profileset and create the target group for the complete profileset. Then the results are "OR combined".
    => Alternatively you can create a new profile which consists of all attributes and create a target group for this profile.
    Scenario 2) If we have 2 profiles and a target group in a profile set how do I create a Target Group for all the BP's in the Profile set. The only selection criteria in the Graphic Modeller for me right now is Attribute lists. How do I select Target Groups and Profiles
    => Just create the target group for the complete profile set, then one consolidated target group is created.
    Does this help?
    Regards, Guido.

  • Transport Layers and Target Groups

    Hello,
    Can one transport layer be assigned to two different target groups?  We have some number range changes that are automatically trying to go to our FIX_QAX target group since it is config, however, the transport cannot be generated because the config is part of package KEG0 which is set up currently as part of the SAP layer which only handles the FIX_IND target group.  I was thinking of making the SAP layer go to both target groups FIX_QAX & FIX_IND.  Is there any danger of this?
    Thank you for your time,
    Erin Byrne

    i think we can't assing a transport layer to 2 different target groups. and, even connection b/n 2 target groups is not possible. i am not sure, if we can use the same transport layer (SAP) twice.
    the alternative way is.. manually (copy the data file and cofile in the other tranport domain) import the request.
    hope this info helps.
    regards,
    Rajesh.
    <i>pls, award points</i>

  • Issue in OWB mapping - when changing source and target database

    Hi,
    I need help for resolution of the issue I am facing when moving mapping from development environment to QA.
    Here is situation,
    We develop ETL using one source, one staging and one target database.
    In development we use one control_center for Source to staging and another control center staging to target.
    All works fine in development.
    Now I have created new runtime repository and imported all OWB projects (with full dependencies, exact replica of development). Now I need to change source and staging and target as different database.
    I have created new database location connections and defined/attached DB connectors with stage and target location.
    Now issues are
    1.     Two Staging mapping are not able to bound with source table (giving different error
    a.     One mapping show error for source synonym translation no longer valid when deploying this mapping , but validation comes without any issue)
    b.     Other mapping show error for source table/object not bound to repository
    2.     All the target mapping show validation successful, but when deploying says “table or view does not exist”. But tables are exists on source stage and target. (also permission are set correctly for target user to read from staging tables).
    Not sure how to proceed from here.
    I have recreated new repository and re-imported all project/mappings and defined all connection but still same issue.
    Thanks in advance,
    Vipin

    1. Two Staging mapping are not able to bound with source table (giving different error
    a. One mapping show error for source synonym translation no longer valid when deploying this mapping , but validation comes without any issue)
    b. Other mapping show error for source table/object not bound to repository
    The above error were resolved when re-synchronized the table (for few I have to reimport the table) and mapping.
    2. All the target mapping show validation successful, but when deploying says “table or view does not exist”. But tables are exists on source stage and target. (also permission are set correctly for target user to read from staging tables).
    The above error still pending. My target mapping are not able to deployed/compiled.
    For the above I have defined one Staging location to one target target location and target location have connector to staging (not sure if I have to define connector name same as staging location, as I have created DB connector with different name but reference database is same as staging location).
    Mapping are assoicated with desired data locatoin and meta data.
    control center is also have that data location.
    Mapping are configured for the desired location.

  • How do I setup RFC if Solution Manager and Target system are in same server

    Dear Experts,
    How do I setup RFC if the Solution Manager and the Target System (SAP ERP 6.0) are sitting in the same server?
    Do I really need to setup RFC?
    regards,
    Abraham

    Hello,
    An RFC is a Remote Function Call and is used to communicate between computer systems.
    A system can be on a server. Multiple systems can be on a single server, a single system can exist on multiple servers.
    When you setup the RFC Target it is the Host and not the system that is specified.
    You can get the host information when logged into the ERP system by running transaction SM59.
    This would then be the target Host in the RFC from Solman to the ERP system.
    As Miguel suggested this is rather simple. So I hope this has shone a light for you so you may proceed.
    But if you continue to have problems please advise.
    Regards,
    Paul

  • Change Manager and Person Responsible

    Why the Change Manager partner function is defined with function category "Person Responsible" and the CRM relationship "is responsible BP for"? This is related to the "Person responsible" field of a change document in the transaction crmd_order, when I use the find tab? What does it happen if I define the Change Manager like a simple employee?
    Thanks
    Antonello

    Hi
    Under HRMS Manager=> Security, you can find *"CustomForm"*
    You can select "Combined Person & Assignment Form" as the form to be customized and restrict based on Person Action and Person Type.
    Cheers,
    Ganesh
    Edited by: Ganeshbabu Gnanagurusamy on Aug 11, 2009 3:28 PM

  • Cisco Prime 4.2, Inventory group management and reports group

    Hi
    I have created some groups under Inventory > Group Management > Device.  This works fine.
    Then I want to create a monthly report for Reports > Performance > Device > Availability.  Here I guessed I would find my groups created under inventory.
    But I can se the groups, one group is duplicated, but all groups are empty.  Under all devices, I can only see 6 og th devices but it should have been 122. Under the different subnet groups, there's no devices.
    Should'nt I've seen the groups created under inventory when I want to make a report? Under the device list for quick report.
    Br
    Geir

    Hm.... strange  I've been looking around under Report, and looked at Inventory and Performance reports.
    Inventory > Detailed Device shows all the devices and my groups.
    Performance > Device > Availability show just 6 out of my 122 devices.
    Under Inventory > Group Managment > Device I have a group called Datasenter.
    Under Performance > Device > Availability I can see 2 of these groups, but their both empty.
    When i delete this group, one of them dissapeer from Under performance.  WHen I create it again, it comes back but empty.
    Something must be corrupt.
    Geir

  • Segmentation and Target groups

    Hi,
    Is there a way to create sub-sets of Target Groups so that whenever users run a campaign, the system does not have to go back todatabase tables to filter data, but it is done in sub-sests only to enhance system performance.
    Regards,
    Monica

    Hi Pooja,
    which version of the product do you use? CRM 2007?
    Scenario 1) I need to combine 2 profiles with an 'OR' condition and create target groups out of the combined profile. How do I accomplish this? Is there any method to combine profiles in the Graphic Modeler?
    => You could have 2 profiles in a profileset and create the target group for the complete profileset. Then the results are "OR combined".
    => Alternatively you can create a new profile which consists of all attributes and create a target group for this profile.
    Scenario 2) If we have 2 profiles and a target group in a profile set how do I create a Target Group for all the BP's in the Profile set. The only selection criteria in the Graphic Modeller for me right now is Attribute lists. How do I select Target Groups and Profiles
    => Just create the target group for the complete profile set, then one consolidated target group is created.
    Does this help?
    Regards, Guido.

  • Campaigns and Target Groups

    I'm trying to extract information about target groups and related campaigns to BW from CRM. I was initally looking at 0CRM_TGBPCT but this was extracting only one record and I found an associated OSS note (No 717539) to it recommending the use of another datasource called 0CRM_CONTACT_OUT. I tried using this datasource but when I test it even in CRM (RSA3) it says 0 records. I know data is in there though.
    Would someone be able to shed some light on this and be able to give me any tips on the same.
    Thanks !!!!

    Hi to all,
    I've the same problem when load data with datasource 0CRM_TGBPCT.
    If I extract from RSA3 retrive the correct data but if I extract directly from BW the system load only 1 record!!!
    please anyone help me?
    P.S.: The remote user for the connection have already SAPALL authorization!

Maybe you are looking for

  • Does HP Pavilion p7-1154 support AMD Dual Graphics?

    I have a Pavilion p7-1154 - Serial no.{Removed for privacy} - The motherboard is an AAHD3-HB (stock MB) made by Pegatron. I have upgraded the stock RAM from 6 GB of 1333 to 16 GB of Corsair Vengence 1600 and upgraded the processor from an AMD A6 3600

  • How to avoid duplicate BOM Item Numbers?

    Hello, is there a way to avoid duplicate BOM Item Numbers (STPO-POSNR) within one BOM? For Routings I could avoid duplicate Operation/Activity Numbers with transaction OP46 by setting T412-FLG_CHK = 'X' for Task List Check. Is there an aquivalent for

  • Outgoing Payment

    Dear Experts I am making a Pld report on outgoing payment in which i  want to display payment method ..cash or bank.. how can i distinguish between  cash and  bank payment   because in OVPM  table when cash payment is made it stores G/L Code..in case

  • MDB and load balnce

    Appreciated for any input in advance.           I am working on application that is running on a weblogic 9.2 cluster with two managered nodes. There two JMS servers, one for each node instance, and Uniformed Distributed Destination queue is configur

  • Problem with alv edit and save

    hi all,        can anyone find me a solution for alv edit and save...the issue is that i will be editing and just clicking on save button withot any row selction and the data changed should be updated in database.