Change Management Service

Hi all,
I know transporting using file system but what is change management service. is it any tool, please let me know about this.
Thanks,
anil.

Hi,
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Also...
How to configuring the CMS for XI?
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Where can I get installation files of DTR, CBS, and CMS?
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202 -> How to Guide on
'How ToTransport XI Content Using CMS'.
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Regards
Chilla

Similar Messages

How to change the management agent to use new management service ?

RDBMS Version:: 10.2.0.3
Operating System and Version:: AIX 5L
OEM Console Operating System and Version:: AIX 5L
Configuring the Management Agent to Use a New Management Service
Hi,
I am trying to change the management agent to use new management service using following process.
1. Stop management agent.
2. Change in file Agent_home/sysman/config/emd.properties
For values REPOSITORY_URL and emdWalletSrcUrl and emdWalletDest
3. Delete all the files in the following directories:
AGENT_HOME/sysman/emd/upload/
AGENT_HOME/sysman/emd/state/
4. Start the management agent.
./emctl status agent is showing the new URL for management server (OMS).
But I am not able to locate the new host on the Web console at the OEM console where it is changed to.
Can you suggest me workaround for the same?
Thanks
Dilipkumar Patel

Hi,
I am getting following error when trying to upload.
tb152 /appl/oracle/oem/10.2.0/bin> ./emctl upload agent
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
tb152 /appl/oracle/oem/10.2.0/bin>
Regards
Dilipkumar Patel.

BO Data Services Change Management with SAP Charm Functionality

HI Gurus,
We have been tasked with automating the Change Management activity for Business objects data Services. The same is currently performed as a manual task which could be prone to errors. We have researched all over the place and we have not been able to find any documentation on in order to carry out this activty through Solution Manager ChaRm functionality.
So, Can SAP Solution manager perform the LCM (Life Cycle management) for Business objects Data Services via means of it CHaRm functionality?
Right now we know that the components for BO are present on Solution manager within the SMSY transaction. We have also been able to create the complete landscape within the same and create a project template for it.
Now the challenge is how do we configure ChaRm in order to move the DI code from one repository to the next?
here are the requirements we are trying to implement:
1. Create a full landscape for Business Objects Data Services within SMSY in Solution manager
2. Create Project template for Business objects Data Services
3. Create RFC connections to Database and BODS Client Servers
4. Configure Charm in order to automate Change Management for Data Service
Please advice.
Thanks,
Nat Hernandez
SAP BO/BW Technical Architect

Hi Natanael
I am also looking for the same
Would you please let me know how did you implement this

Office 2013 Rights Management Services??

I am trying to make a powerpoint file I have created in Office 2013 (on Windows 7 64 bit) a read-only file so that presenters cannot change content, but can still view and present the file normally.
This was very easy to do with previous versions of Office, but in 2013 I am asked to sign in to "Rights Management Services" using my live ID. I have no problem with that, but it has not worked for me yet - I get the following error:
Any advice or help would be much appreciated!
A couple notes: I can still encrypt with a password, but this would not allow presenters to open, view and present the file without the password.

Hi Dan,
It seems that PowerPoint doesn't have Restrict Editing option available as described here: https://support.office.com/en-us/article/Protect-your-document-workbook-or-presentation-with-passwords-permission-and-other-restrictions-05084cc3-300d-4c1a-8416-38d3e37d6826?ui=en-US&rs=en-US&ad=US
So the only option I see to complete your scenario is to use RMS - Rights Management Servers. However RMS can be installed as on-premises service, so you have to deploy and configure AD RMS server (it is not easy as it requires certificates, SQL, designing,
etc).
You can other options as weel - for example use Office 365 E3 or E4 licences. Those include Azure RMS subscription. If you have such license assigned to your user account, once you get prompt for credentials - type your O365 user credentials.
Another option is to use RMS for individuals. Go to the page http://aka.ms/rms and register your private account to use RMS and then you would be able to sign in to RMS Service with your private e-mail account. Be advised that not all private e-mail domains
are supported. For example you will not be able to register your @gmail.com or @hotmail.com account...
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

Configuration Manager services stoping on regular basis.

we have installed and configured WebCenter Interaction 10.3 on Windows 2003 (x86) and using JVM 1.5.0_09.
Running all the component as windows services. Today our Configuration Manager services is stopping on regular basis.
Error:
================================================================================================
STATUS | wrapper | 2009/08/06 06:14:48 | --> Wrapper Started as Service
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.2', '%JVM_2%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.3', '%JVM_3%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.4', '%JVM_4%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.5', '%JVM_5%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.6', '%JVM_6%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.7', '%JVM_7%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.8', '%JVM_8%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.9', '%JVM_9%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.10', '%BIT_MODE%' is not a valid argument to the jvm. Skipping.
STATUS | wrapper | 2009/08/06 06:14:48 | Launching a JVM...
INFO | jvm 1 | 2009/08/06 06:14:50 | Wrapper (Version 3.2.3) http://wrapper.tanukisoftware.org
INFO | jvm 1 | 2009/08/06 06:14:50 | Copyright 1999-2006 Tanuki Software, Inc. All Rights Reserved.
INFO | jvm 1 | 2009/08/06 06:14:50 |
INFO | jvm 1 | 2009/08/06 06:14:50 |
INFO | jvm 1 | 2009/08/06 06:14:50 | WARNING - Unable to load the Wrapper's native library 'wrapper.dll'.
INFO | jvm 1 | 2009/08/06 06:14:50 | The file is located on the path at the following location but
INFO | jvm 1 | 2009/08/06 06:14:50 | could not be loaded:
INFO | jvm 1 | 2009/08/06 06:14:50 | C:\bea\alui\configmgr\2.0\bin\..\..\..\common\wrapper\3.2.3\lib\native\win32\wrapper.dll
INFO | jvm 1 | 2009/08/06 06:14:50 | Please verify that the file is readable by the current user
INFO | jvm 1 | 2009/08/06 06:14:50 | and that the file has not been corrupted in any way.
INFO | jvm 1 | 2009/08/06 06:14:50 | One common cause of this problem is running a 32-bit version
INFO | jvm 1 | 2009/08/06 06:14:50 | of the Wrapper with a 64-bit version of Java, or vica versa.
INFO | jvm 1 | 2009/08/06 06:14:50 | This is a 64-bit JVM.
INFO | jvm 1 | 2009/08/06 06:14:50 | Reported cause:
INFO | jvm 1 | 2009/08/06 06:14:50 | no wrapper in java.library.path
INFO | jvm 1 | 2009/08/06 06:14:50 | System signals will not be handled correctly.
INFO | jvm 1 | 2009/08/06 06:14:50 |
INFO | jvm 1 | 2009/08/06 06:14:50 | OpenLog: verbosity level = 2
INFO | jvm 1 | 2009/08/06 06:14:50 | bid.bootstrap.loglevel=info+
INFO | jvm 1 | 2009/08/06 06:14:50 | 8-6-2009     6:14:50.872     Info     OpenKernel.Config     Disabled-1249553690622     WrapperStartStopAppMain     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Loading config data from C:\bea\alui\configmgr\2.0\bin\../settings/config
INFO | jvm 1 | 2009/08/06 06:14:51 | 8-6-2009     6:14:51.419     Info     OpenKernel.Config     Disabled-1249553690622     WrapperStartStopAppMain     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Setting subscription data.
INFO | jvm 1 | 2009/08/06 06:14:51 | container config context:EAS:configurator
INFO | jvm 1 | 2009/08/06 06:14:51 | OpenLog: Registered application name: ConfigInitialization (local machine only)
INFO | jvm 1 | 2009/08/06 06:14:51 | OpenLog: Configuration component contained no logging settings. Creating disabled log service.
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.coyote.http11.Http11Protocol init
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Initializing Coyote HTTP/1.1 on http-12345
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.startup.Catalina load
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Initialization processed in 1157 ms
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.core.StandardService start
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Starting service cm
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.core.StandardEngine start
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Starting Servlet Engine: Apache Tomcat/6.0.14
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.startup.HostConfig deployWAR
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Deploying web application archive cm.war
INFO | jvm 1 | 2009/08/06 06:14:55 | Aug 6, 2009 6:14:55 AM org.apache.catalina.realm.JAASRealm setContainer
INFO | jvm 1 | 2009/08/06 06:14:55 | INFO: Set JAAS app name cm
INFO | jvm 1 | 2009/08/06 06:14:55 | 06 Aug 2009 06:14:55,810 INFO - Reading standard config org/apache/myfaces/resource/standard-faces-config.xml [FacesConfigurator:151]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/jsf-facelets.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/opencontrols-framework.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/opencontrols.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,294 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/tomahawk-1.1.3.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,294 INFO - Reading config /WEB-INF/faces-config.xml [FacesConfigurator:411]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,341 WARN - Locale name in faces-config.xml null or empty, setting locale to default locale : en_US [LocaleUtils:52]
INFO | jvm 1 | 2009/08/06 06:14:56 | OpenLog: verbosity level = 2
INFO | jvm 1 | 2009/08/06 06:14:56 | OpenLog: Registered application name: OpenControls.winapaqlog4
INFO | jvm 1 | 2009/08/06 06:14:56 | OpenControls.winapaqlog4
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,154 WARN - Ignored element 'dispatcher' as child of 'filter-mapping'. [WebXmlParser:347]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,154 WARN - Ignored element 'dispatcher' as child of 'filter-mapping'. [WebXmlParser:347]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,169 INFO - ServletContext 'null' initialized. [StartupServletContextListener:99]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,169 INFO - Serialization provider : class org.apache.myfaces.shared_impl.util.serial.DefaultSerialFactory [StartupServletContextListener:140]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,185 INFO - Root WebApplicationContext: initialization started [ContextLoader:174]
INFO | jvm 1 | 2009/08/06 06:14:57 | Aug 6, 2009 6:14:57 AM org.apache.catalina.core.ApplicationContext log
INFO | jvm 1 | 2009/08/06 06:14:57 | INFO: Loading Spring root WebApplicationContext
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,263 INFO - JDK 1.4+ collections available [CollectionFactory:76]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,263 INFO - Commons Collections 3.x available [CollectionFactory:80]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,294 INFO - Loading XML bean definitions from ServletContext resource [WEB-INF/applicationContext-acegi-security.xml] [XmlBeanDefinitionReader:347]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,607 INFO - Bean factory for application context [Root WebApplicationContext]: org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy [XmlWebApplicationContext:100]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,622 INFO - 9 beans defined in application context [Root WebApplicationContext] [XmlWebApplicationContext:322]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate MessageSource with name 'messageSource': using default [[email protected]9d] [XmlWebApplicationContext:473]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate ApplicationEventMulticaster with name 'applicationEventMulticaster': using default [org.springframework.context.event.SimpleApplicationEventMulticaster@f0f2f1e] [XmlWebApplicationContext:495]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate ThemeSource with name 'themeSource': using default [[email protected]f0fdecd] [UiApplicationContextUtils:83]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Pre-instantiating singletons in factory [org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy] [DefaultListableBeanFactory:261]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Validated configuration attributes [AbstractSecurityInterceptor:220]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Using context class [org.springframework.web.context.support.XmlWebApplicationContext] for root WebApplicationContext [ContextLoader:189]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Root WebApplicationContext: initialization completed in 703 ms [ContextLoader:199]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,904 INFO - Initializing filter 'RequestContextFilter' [RequestContextFilter:152]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,904 INFO - Filter 'RequestContextFilter' configured successfully [RequestContextFilter:177]
INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:57 AM org.apache.catalina.startup.HostConfig deployWAR
INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Deploying web application archive ROOT.war
INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:58 AM org.apache.coyote.http11.Http11Protocol start
INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Starting Coyote HTTP/1.1 on http-12345
INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:58 AM org.apache.catalina.startup.Catalina start
INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Server startup in 4531 ms
INFO | wrapper | 2009/08/06 07:10:02 | User logged out. Ignored.
INFO | wrapper | 2009/08/06 07:10:03 | User logged out. Ignored.
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: verbosity level = 2
INFO | jvm 1 | 2009/08/06 07:10:04 | bid.bootstrap.loglevel=info+
INFO | jvm 1 | 2009/08/06 07:10:04 | 06 Aug 2009 07:10:04,279 INFO - Closing application context [Root WebApplicationContext] [XmlWebApplicationContext:599]
INFO | jvm 1 | 2009/08/06 07:10:04 | 06 Aug 2009 07:10:04,279 INFO - Destroying singletons in {org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy} [DefaultListableBeanFactory:272]
INFO | jvm 1 | 2009/08/06 07:10:04 | 8-6-2009     7:10:04.279     Info     OpenKernel.Config     Disabled-1249557004060     Wrapper-Shutdown-Hook     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Loading config data from C:\bea\alui\configmgr\2.0\bin\../settings/config
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenControls.winapaqlog4
INFO | jvm 1 | 2009/08/06 07:10:04 | INFO: PmbApplication.run() exiting forcefully... Releasing one worker thread.
INFO | jvm 1 | 2009/08/06 07:10:04 | 8-6-2009     7:10:04.810     Info     OpenKernel.Config     Disabled-1249557004060     Wrapper-Shutdown-Hook     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Setting subscription data.
INFO | jvm 1 | 2009/08/06 07:10:04 | container config context:EAS:configurator
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: Registered application name: ConfigInitialization (local machine only)
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: Configuration component contained no logging settings. Creating disabled log service.
STATUS | wrapper | 2009/08/06 07:10:06 | <-- Wrapper Stopped
============================================================================
When we are starting , it stays for couple of mins say 10/15 mins then it stops.
Can any body have any idea what should i do to get it resolved.

The logs look odd to say the least on start up and there are couple items when the service gets the signal to shutdown that are suspicious.
My suggestion is to troubleshoot top down. Clean up the discrepant messages upon startup.
message : INFO
Please verify that the file is readable by the current user
and that the file has not been corrupted in any way.
One common cause of this problem is running a 32-bit version
of the Wrapper with a 64-bit version of Java, or vica versa.
This is a 64-bit JVM.
Are you attempting change the existing out of box JVM?
You know it doesn't use sun jvm anymore. It's JROCKIT.
Make sure your JVM Settings are as follows:
C:\bea\alui\configmgr\2.0\settings\config\wrapper_base.conf
# Java Application
wrapper.java.command=%JRE_PATH%/bin/java
THEN Verify:
CMD
cd C:\bea\alui\common\jre\1.5.0_32\
java -versionYou should get something like.
java version "1.5.0_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)
BEA JRockit(R) (build R27.4.0-90-89592-1.5.0_12-20070928-1715-windows-ia32, comp
iled mode)
In any case, your enviroment seems funky. Use the tips above to troubleshoot.
Troubleshoot this error first and find out why it thinks your using a 64 bit JVM versus a 32 bit one.
Last tip: Place Logging into Debug to see whether more logging will give you further insight into the problem.
Hope this helps!
Cheers!!!

Change Management. Cannot go to the next phase ... And common questions.

Hi dear colleagues!
Here there are some unpleasant problems which has arisen during Change Management functions realization...
1. After approving of Urgent Correction by so-called "Change Manager", "developer" couldn't set it status "in development" -> and begin corrections in DEV system. It outputs in status bar: "NO ACTIONS IN THE WORK LIST".
2. How should i link some urgent correction (or simply Service Message) to a specific Maintenance Cycle?
The same problem I cannot go to the next phase, system outputs that "No Maintenance Cycle is open for the current system".
3. And please can u explain in a simple words: Should i always make a maintenance project for using "Change Management" functions?
4. Can we use "Change Management" for 4.0C (vers. of satellite) systems?
Any help and tips would really appreciate.
Best regards,
Vladimir

Hi,
For configuring change management, you will have to follow the SPRO guidelines for setting up transport routes between satellite systems.
Well i list down the activities that you need to do. Details you can find in SPRO -- > SAP Solution Manager --> Scenario Specific Settings --> Change Request Management --> Standard Configuration --> transport management System
1) Activate Extended transport control by setting System Parameter CTC=1 in STMS --> Systems
2)Create Client specific transport route between satellite systems
3) Ensure that all the systems in the domain have the same transport group.
4)Configure or activate Single transport Strategy in STMS --> Overview --> transport routes.
5)Activate TMS Trusted services in STMS --> Overview --> Systems --> Goto --> transport Domain --> Management Tab page --> Security option group box.
Besides these activities, you will have to execute the SPRO IMG Activity
SAP Solution Manager --> Basic Settings --> SAP Solution Manager System --> Activate Integration with Change Request Management
For activity Intigration Solution Manager make the following entry
APPL: Change Request Management
RFC Destination : NONE
For activity Integration Change Request Management
make the entries in table BCOS_CUST as g
iven in the IMG instruction.
Now in SOLAR_PROJECT_ADMIN you can activate a maintenance project for change management by going to System Landscape --> Project Cycle
Click the check box Activate Change request Management.
(NOTE: The above option comes only in Solution Manager 4.0, for SOLMAN 3.2 you can directly create maintenance cycle in /n/tmwflow/cmsconf --> Distribution Routes --> Project Landscape group box .)
Now you can create a maintenance cycle by clickin on the button Create Task List in project cycle tab page.
Navigate to task list and activate the tasklist (Maintenance Cycle) by clicking on the status button.
Now while creating change request ensure that you are assigning the correct ibase /component of the production system in the satellite system landscape. You have to enter the ibase component of the client of the production system to whcih the client specific transport route has been made. You can find this number in transaction IB52
Hope now u can move on with CHARM.

Solution Manager Service Desk & ChaRM Integration

Hi All,
I have query on integration between Solution Manager Service Desk & ChaRM. As we know u2013 it is possible to create a change request from service desk if the incident requires a change in the satellite system. In this case even we can see the list of all change requests (if we raise more than one) as connected / reference documents.
But we observe that it is possible to close the Service Desk request even if the ChaRM request is not closed / abandoned.
Just want to know if there is any configuration in Service desk, using which we can prevent the user from closing the incident in sevice desk till the time the ChaRM change request has not got closed.
Any pointers in this regard are welcome. Thanks a lot.
Best regards,
vithal

You can control using BADI development. Any Check or Save ( ORDER_SAVE ) badi you can write the condition based on the change document availablity.

Solution Manager Service Desk: BC sets

Hi,
While configuring the SolMan Service Desk Scenario (in IMG activities) "Basic BC Sets for Configuration" few doubts I have:
1. This list of BC Sets need to be done on each Client (Devp / QA & Prd)? with reference to Note: 898614
SOLMAN40_SDESK_BASICFUNC_000
SOLMAN40_SDESK_ACT_ADVCLOSE_001
SOLMAN40_SDESK_ACTIONLOG_001
SOLMAN40_SDESK_TPI_ACT_AST_001
2. Can I change the Production system role while activating BC Sets On that Client?
3. Due to some reasons if i missed to change the role from Producation to XYZ and activated, is there will be any impact on the system?
Please suggest me on the above points.
Thanks & Regards,
Jose

Hi,
refer to following notes.
These BC sets actually carry out some standard setting across your system.
Note 898614 - Solution Manager Service Desk: BC sets
Note 931196 - New text types for Service Desk in SAP Solution Manager
Pls assign pts.

Request management service issue with SSL Sites

Hi guys,
I've configured up the request management service, but after start the service on our wfe servers (even before to configure specific web applications), our ssl sites begin to fail and the event viewer start to alert several errors, by the other hand,
sites over 80 port with no SSL works as expected.
I've found some similiar scenarios without a happy ending. Below you can find some of the main errors in event viewer and ULS Logs. In
this post solved a very similar issue using ssl host headers with a unique ip but we are using fqdn certificates so it is not an option for us.
I've already checked the
good posts from Spencer Harbar and He says that is good idea to use host named site collection, but this is not an option for me because we need to use Self Service Creation and mixed authetnication, besides, None of the Technet literature that i've reviewed
says something about don't support path based site collection.
So far, the only way to avoid this errors is not using the service(discouraging finding), These are some errors we got on Event viewer and logs:
Machine 'MACHINENAME (AppPool(_LM_W3SVC_515444293_ROOT))' failed ping validation and has been unavailable since '3/28/2014 3:55:48 PM'. (Just starting the service Event viewer begis to have a bunch of this errors)
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q3
High Reached maximum number of failed machines based on ping results for this routing group
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q4
Medium Unavailable machines based on ping results: MACHINENAME
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.97 w3wp.exe (0x1184)
0x1C2C SharePoint Foundation
Request Management adc7u
Medium Mapping URI from 'https://HOSTNAME:443/Style Library/somos-sura-css/inicio/inicio.css' to 'https://MACHINENAME/Style%20Library/somos-sura-css/inicio/inicio.css'
53c2819c-8217-20f3-68c0-cb2f392c388b
Seems like it tries to find a site with the machine name, not the host name registered in the Alter access mappings (like portal.acme.com) .
I would appreciate some feedback about this. Another posts with similar issues:
http://amolmeshe.blogspot.com/2013/05/sharepoint-2013-request-management.html
http://www.akspug.org/Blog/Post/4/Request-Management-and-Error-8316
Regards,

Hi,
According to your post, my understanding is that you had an issue about the Request management service with SSL sites.
It’s a known issue that the request management service could not work with the SSL site.
We had already reported the issue to the product team, as a workaround, if you want to use the request management service, you can change the https site back to http.
What’s more, the SharePoint 2013 SP1 has been relased, you can install it to check whether it works.
http://support.microsoft.com/kb/2817429/en-us
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Install OEM 12c fails on "start oracle management service". win2008

Windows Server 2008 R2 Enterprise SP1 x64
Oracle Database 11g release 11.2.0.3.0
I install OEM 12c(12.1.0.3) following this manual: Installing Enterprise Manager System
before start i've installed WebLogic Server 10.3.6 and aplied 2 patches specified in this manual
installation type is advanced, small, so i have created database from the appropriate template
i also installed cygwin and started ssh-service
the installation of OEM process fails on 73% "start oracle management service" with this message:
INFO: oracle.sysman.top.oms:Starting OMS ...
INFO: oracle.sysman.top.oms:Executing command: cmd /c set NEED_EXIT_CODE=1&&C:\Oracle\Middleware\oms\bin\emctl.bat start oms
INFO: oracle.sysman.top.oms:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.oms:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.oms:Windows service OracleManagementServer_EMGC_OMS1_1 failed to be started
INFO: oracle.sysman.top.oms:Oracle Management Server is Down
INFO: oracle.sysman.top.oms:Please check C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for error details
SEVERE: oracle.sysman.top.oms:Starting of OMS failed.
in C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log i got this:
2013-09-06 12:24:27,012 [main] ERROR commands.BaseCommand logAndPrint.620 - Oracle Management Server Could Not Be Started
Check EM Server log file for details: C:\Oracle\gc_inst\user_projects\domains\GCDomain\servers\EMGC_OMS1\logs\EMGC_OMS1.out
2013-09-06 12:24:27,012 [main] INFO commands.StartCommand startOMS.337 - startOMS finished with result: 1
2013-09-06 12:24:30,974 [main] INFO commands.StartCommand startOMS.371 - net start return code is 2
2013-09-06 12:24:30,974 [main] ERROR commands.BaseCommand logAndPrint.620 - Windows service OracleManagementServer_EMGC_OMS1_1 failed to be started
2013-09-06 12:24:34,094 [main] INFO commands.BaseCommand printMessage.404 - statusOMS finished with result: 8
2013-09-06 12:24:34,094 [main] ERROR commands.BaseCommand logAndPrint.620 - Please check C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for error details
and in C:\Oracle\gc_inst\user_projects\domains\GCDomain\servers\EMGC_OMS1\logs\EMGC_OMS1.out this:
<06.09.2013 12:24:01 ICT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 23.25-b01 from Oracle Corporation>
<06.09.2013 12:24:01 ICT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13349651 Thu May 24 10:18:28 IST 2012
WebLogic Server Temporary Patch for BUG14482558 Fri Jan 11 11:20:16 IST 2013
WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<06.09.2013 12:24:03 ICT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:Error: Failed to get value from Standard Input
Enter password to boot WebLogic server:
<06.09.2013 12:24:04 ICT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: Booting as admin server, but servername, EMGC_OMS1, does not match the admin server name, EMGC_ADMINSERVER
     at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67)
     at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
     at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
     at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
     at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
     at weblogic.Server.main(Server.java:71)
>
<06.09.2013 12:24:04 ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
wlst:
wls:/offline>
what I did wrong? how to start WLS server?

Hi,
First of all with EM 12.1.0.x any version you are not required to install wls separately, we have single installer for em and wls. Is there any specific reason you installer wls separately?
Coming back to your issue: can you check
%OMS_HOME%\BIN>emctl istart oms completes successfully.
%OMS_HOME%\BIN>emctl istop oms completes successfully.
Also open an SR with Oracle support and share the number. We should debug such issue through SR so that we can share logs and come find a root cause.

Solution Manager Change Management Master Guide

Hi
We are looking into implementing Solution Manager 7.0 and have the
following questions:
- Can we implement change managment in Solution Manager with only one
satellite system (i.e. Development) as the other systems are not ready
yet (i.e. Test, QA etc.)?
- Could you let us know where we can find the master or technical guide
to setup change management in Solution Manager 7.0.

Hi,
it is possible to implement ChaRM even not all satellite systems are available yet.
I am not sure how much functionality you will get using virtual systems but you may configure and test ChaRM using 3 different clients in your DEV system (need to adjust TMS config accordingly).
Some useful information regarding ChaRM configuration can be found [here|/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario]
Since ChaRM relies on Service Desk you should also have a look at appropriate Blogs.
Also you should follow the IMG documentation/steps in SPRO.
Regards

Desktop Window Manager Service on Windows 7 Starter - Any Reason to Leave It Running?

Hello everyone,
-As per title, I'd like to know whether is it better to turn off Desktop Window Manager Session Manager (UxSms) service on Windows 7 Starter - or not. I mean changing the service's default startup type from Automatic to Manual (or Disabled).
-In Windows 7 Starter, the Aero theme and desktop composition are not available at all (not even a basic/partial one), so letting Desktop Window Manager (DWM.exe) to continuously run is useless as it does absolutely nothing. Is my deduction correct?
-All opinions and suggestions are welcomed, thank you very much.
Regards,
-Musafir_86.

Please read the information posted @
http://msdn.microsoft.com/en-us/library/windows/desktop/aa969540%28v=vs.85%29.aspx
Desktop Window Manager
The desktop composition feature, introduced in Windows Vista, fundamentally changed the way applications display pixels on the screen. When desktop composition is enabled, individual windows no longer draw directly to the screen or primary display
device as they did in previous versions of Windows. Instead, their drawing is redirected to off-screen surfaces in video memory, which are then rendered into a desktop image and presented on the display.
Desktop composition is performed by the Desktop Window Manager (DWM). Through desktop composition, DWM enables visual effects on the desktop
as well as various features such as glass window frames, 3-D window transition animations, Windows Flip and Windows Flip3D, and high resolution support.
The Desktop Window Manager runs as a Windows service. It can be enabled and disabled through the Administrative Tools Control Panel item, under Services, as Desktop Window Manager Session Manager.
Many of the DWM features can be controlled or accessed by an application through the DWM APIs. The following documentation describes the features and requirements of the DWM APIs.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Error in oim Role creation using Role Manager Service API from Standalone Java client

Hi,
Facing the following error when trying to create Role using Role Manager Service API from a standalone java client .
Tried with the solution of changing ,
Login into the Web Logic Admin Console --> Servers --> OIM Server --> Protocols --> Modify the Maximum Message from 100000000 to 1000000000, but still the problem persists.
Exception in thread "main" org.omg.CORBA.BAD_PARAM:   vmcid: 0x0 minor code: 0 completed: No
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.getSystemException(Unknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.ReplyMessage_1_2.getSystemException(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.getSystemExceptionReply(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.processResponse(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(Unknown Source)
at org.omg.CORBA.portable.ObjectImpl._invoke(Unknown Source)
at com.sun.org.omg.SendingContext._CodeBaseStub.meta(Unknown Source)
at com.sun.corba.se.impl.encoding.CachedCodeBase.meta(Unknown Source)
at com.sun.corba.se.impl.io.IIOPInputStream.getOrderedDescriptions(Unknown Source)
at com.sun.corba.se.impl.io.IIOPInputStream.inputObjectUsingFVD(Unknown Source)
at com.sun.corba.se.impl.io.IIOPInputStream.simpleReadObject(Unknown Source)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValueInternal(Unknown Source)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValue(Unknown Source)
at com.sun.corba.se.impl.encoding.CDRInputStream_1_0.read_value(Unknown Source)
at com.sun.corba.se.impl.encoding.CDRInputStream.read_value(Unknown Source)
at oracle.iam.identity.rolemgmt.api._RoleManager_ogut7n_RoleManagerRemoteRIntf_Stub.createx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy2.createx(Unknown Source)
at oracle.iam.identity.rolemgmt.api.RoleManagerDelegate.create(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.subject.SubjectProxy.doAs(SubjectProxy.java:64)
at weblogic.security.subject.SubjectManager.runAs(SubjectManager.java:262)
at weblogic.security.Security.runAs(Security.java:48)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy3.create(Unknown Source)
at com.idm.role.CreateRole.createRole(CreateRole.java:113)
at com.idm.role.CreateRole.main(CreateRole.java:167)
Thanks In Advance

Hi , I have used OIM 11g R2.
Please find below the code we have used,
package com.idm.role;
import java.util.HashMap;
import java.util.HashSet;
import java.util.Hashtable;
import java.util.Iterator;
import java.util.Set;
import java.util.logging.Logger;
import javax.security.auth.login.LoginException;
import oracle.iam.identity.exception.NoSuchRoleException;
import oracle.iam.identity.exception.RoleAlreadyExistsException;
import oracle.iam.identity.exception.RoleCreateException;
import oracle.iam.identity.exception.RoleLookupException;
import oracle.iam.identity.exception.RoleModifyException;
import oracle.iam.identity.exception.SearchKeyNotUniqueException;
import oracle.iam.identity.exception.ValidationFailedException;
import oracle.iam.identity.rolemgmt.api.RoleManager;
import oracle.iam.identity.rolemgmt.api.RoleManagerConstants;
import oracle.iam.identity.rolemgmt.vo.Role;
import oracle.iam.platform.OIMClient;
import oracle.iam.platform.authz.exception.AccessDeniedException;
public class CreateRole {
private final static Logger LOGGER = Logger.getLogger(CreateRole.class .getName());
OIMClient oimClient = null;
public OIMClient connectToOIM() {
LOGGER.info("In connectToOIM ");
Hashtable env = new Hashtable();
env.put(OIMClient.JAVA_NAMING_FACTORY_INITIAL,
    "weblogic.jndi.WLInitialContextFactory");
env.put(OIMClient.JAVA_NAMING_PROVIDER_URL,
    "t3://V-hydidm1.itig.co.in:14000");
System.setProperty("java.security.auth.login.config",
    "F:\\Projects\\IDM\\Team\\Env_setup\\OIM_Setup\\designconsole\\config\\authwl.conf");
System.setProperty("java.security.policy",
    "F:\\Projects\\IDM\\Team\\Env_setup\\OIM_Setup\\designconsole\\config\\xl.policy");
System.setProperty("OIM.AppServerType", "wls");
System.setProperty("APPSERVER_TYPE", "wls");
System.setProperty("weblogic.Name", "oim_server1");
oimClient = new OIMClient(env);
try {
   oimClient.login("xelsysadm", "Passw0rd".toCharArray());
} catch (LoginException e) {
   e.printStackTrace();
System.out.println("Connected");
return oimClient;
public void readRoleMetadata() {
LOGGER.info("in readRoleMetadata ");
RoleManager roleManagerService = oimClient
    .getService(RoleManager.class);
try {
   Role roleVo = roleManagerService.getDetails(
     RoleManagerConstants.ROLE_DISPLAY_NAME, "API Role1", null);
   Set attributeNameSet = roleVo.getAttributeNames();
   Iterator it = attributeNameSet.iterator();
   while (it.hasNext()) {
    System.out.println("Attribute Name :: " + it.next());
   // roleVo.setAttribute("ADentitlements", "Security Admin access");
   String adEntitlements = "" + roleVo.getAttribute("ADentitlements");
   System.out.println("AD Entitlements :: " + adEntitlements);
   System.out.println("DB Entitlements :: " + ""
     + roleVo.getAttribute("DBEntitlements"));
   System.out.println("Unix Entitlements :: " + ""
     + roleVo.getAttribute("UnixWindows"));
   System.out.println("VPN :: " + "" + roleVo.getAttribute("VPN"));
} catch (SearchKeyNotUniqueException e) {
   e.printStackTrace();
} catch (NoSuchRoleException e) {
   e.printStackTrace();
} catch (RoleLookupException e) {
   e.printStackTrace();
} catch (AccessDeniedException e) {
   e.printStackTrace();
public void createRole() {
LOGGER.info(" in Create role ");
RoleManager roleManagerService = oimClient
    .getService(RoleManager.class);
HashMap<String, Object> roleCreationAttrMap = new HashMap<String, Object>();
roleCreationAttrMap.put(RoleManagerConstants.ROLE_NAME, "API Role1");
roleCreationAttrMap.put(RoleManagerConstants.ROLE_DESCRIPTION,
    "This Role is created using API Role1");
roleCreationAttrMap.put(RoleManagerConstants.ROLE_DISPLAY_NAME,
    "API Role1");
roleCreationAttrMap.put("ADentitlements", "API Role1 AD Entitlements");
roleCreationAttrMap.put("DBEntitlements", "API Role1 DB Entitlements");
roleCreationAttrMap.put("VPN", "No");
roleCreationAttrMap.put("UnixWindows", "API Role1 Unix Entitlements");
Role roleVo = new Role(roleCreationAttrMap);
try {
   System.out.println(" Before Create role *********************************************");
   roleManagerService.create(roleVo);
   System.out.println("Role Created .. ");
} catch (ValidationFailedException e) {
   e.printStackTrace();
} catch (RoleAlreadyExistsException e) {
   e.printStackTrace();
} catch (RoleCreateException e) {
   e.printStackTrace();
} catch (AccessDeniedException e) {
   e.printStackTrace();
public void modifyRole() {
LOGGER.info(" in modifyRole ");
RoleManager roleManagerService = oimClient
    .getService(RoleManager.class);
Role roleVo;
try {
   roleVo = roleManagerService.getDetails(
     RoleManagerConstants.ROLE_DISPLAY_NAME, "API Role1", null);
   String roleKey = roleVo.getEntityId();
   HashMap<String, Object> roleCreationAttrMap = new HashMap<String, Object>();
   roleCreationAttrMap.put("ADentitlements",
     "Updated API Role1 AD Entitlements");
   Set roleKeySet = new HashSet<String>();
   roleKeySet.add(roleKey);
   Role roleVoNew = new Role(roleCreationAttrMap);
   roleManagerService.modify(roleKeySet, roleVoNew);
   System.out.println("Role Modified ..");
} catch (SearchKeyNotUniqueException e) {
   e.printStackTrace();
} catch (NoSuchRoleException e) {
   e.printStackTrace();
} catch (RoleLookupException e) {
   e.printStackTrace();
} catch (AccessDeniedException e) {
   e.printStackTrace();
} catch (ValidationFailedException e) {
   e.printStackTrace();
} catch (RoleModifyException e) {
   e.printStackTrace();
public static void main(String args[]) {
CreateRole miscObj = new CreateRole();
miscObj.connectToOIM();
miscObj.createRole();
//miscObj.readRoleMetadata();
Thanks In Advance .

Function Modules for Change Manager Tickets

Dear all,
I have the requirement to display some basic statistics about the number of change manager tickets that are currently open, that are assigned to a person and in proceesing state.
I had a look into the system but could find a valuable hint on which function modules are available and which are even RFC enabled.
So is there someone who has achieved this or does know how to access that information?
I would be very happy about any hints.
Thank you and best regards.
Nicolas

Hallo Nicolas,
I had the same requirement and started looking into this. Essentially I used php to make RFC calls to SAP.
there are at least 2 FM (they are both RFC enabled) you can use to extract service desk ticket data.
They are:
- CRM_DNO_SELECT_SERVICE_TRANS
This FM has the service desk number as you see it in CRMD_ORDER or CRM_DNO_MONITOR
The other FM is:
- DNO_OW_GET_NOTIFICATIONS and report RNOTIFWL
This will give you data for the notification
You can use DNOH_OBJNR in the first FM and OBJNR in the second to join the two together.
The only thing is that there is no selection screen to select the data within the FM. When you execute both FM you have to provide a variant - based on that variant the data will be picked up. The best thing is probably to setup a variant that will pick up all your tickets and have your rfc calling application compile the stats that you are after. Also the variant you use is not the on you would use in CRM_DNO_MONITOR you have to go the FM transaction and create the variant for it there.
Hope it helps, ~p.

An error prevents the Change Management Upgrade script from executing

I have Warehouse Builder 10g on a database 10g R1.
On a server linux I have the repository, and on other server (Sun 5.9) I have runtimes for production.
I want execute an upgrade deploy action on one object but I get this error:
An error prevents the Change Management Upgrade script from executing successfully. We strongly advise that this Upgrade is UNDONE and the problem is investigated. Data loss may occur if you accept this Upgrade
Any idea?
Thanks,
Fernando.

I review the installation, it was made with a diferent user that database, I get same permission, restart runtimes service and problem was resolved.
Fernando.

Change Management Service

Similar Messages

Maybe you are looking for