Change Maps from KM to Miles

How can I change the maps application (default application) back to miles. For some reason it is displaying in kilometers...

I just noticed last night that after updating my iPhone 3G to the latest software (2.1) mine was mapping directions out in km. I thought that maybe at the time I was picking up a Canadian tower since I was close, but that wasn't the case. I tried it out again this morning and noticed the same thing. This is what I did to fix mine:
Changed the International settings from United States to United Kingdom, clicked back to the main screen, then went back in and changed it back to United States. I powered the phone off, then back on, walla... worked like a charm. Hopefully it works for you. I find that sometimes making changes like that will "force" a refresh on certain settings.

Similar Messages

How do you change the distance units in the new Maps application on Mavericks from KM to miles?

How do you change the distance units in the new Maps application on Mavericks from KM to miles?

The scale in Maps follows your regional settings in System Preferences > Language & Region > Region.
Selecting United States, for example, will use English units (feet and statute miles).
There may be other methods I'm unaware of.

How do I change the settings in Maps from miles to kilometers?

How do I change the settings in Maps from miles to kilometers?

I've had an entirely different experience with Map units. Maps on my iPad (iOS 8) will only deliver units in kilometers, no matter how I adjust the settings for Maps or Region/Language. I am trying to calculate distances between two locations in the United States where all road distances are measured in miles. My iPad region is set to United States. When I open the settings for Maps, change the units from kilometers to miles, and close the window, IOS-8 changes the setting back to kilometers every time.
Slick interfaces and device designs aside, at times these little annoying bugs just make the folks at Apple look like rank amateurs.

How do I convert the MAP app from meters to miles?

In MAPS, how do I convert from meters to miles?

Hi willardfromaustin,
If you are having issues with the distance scale in Maps, you may find the following article helpful:
Tip: The scale guide in Maps uses the regional measurement preferences (miles or kilometers) you set in the Advanced section of the Language & Region settings in System Preferences.
Mac Basics: Maps app helps you find your destination
http://support.apple.com/kb/HT5973
Regards,
- Brenden

TS1424 apple store,just wanted to check on how to change my area settings in itunes from United States to United Arab Emirates(that's where i stay).it got changed when i tried to download google maps from the US store in itunes.please help me out here.Tha

Apple store,just wanted to check on how to change my area settings in itunes from United States to United Arab Emirates(that's where i stay).it got changed when i tried to download google maps from the US store in itunes.please help me out here.Thanks

Please please help me, if you know how.

Changing class-map from all to any

I need to add a second port to a class-map, so I need to change it from match-all to match-any. Do I just remove the old virtual server and re-add it?
no class-map match-all vs_test
class-map match-any vs_test
2 match virtual-address 10.1.1.10 tcp eq 80
3 match virtual-address 10.1.1.10 tcp eq 443

Hi Bill,
Yes, you will have to remove the old configuration and define the class-map again. It's not possible to change the type of a class after it has been configured.

Advanced mapping from IDOC to SOAP with reversed 3 level context change

Hi everyone.
I am having a though time mapping the HRMD_A01 IDOC into a SOAP message. The reason is that the reciever expects an xml structure where the root node is cost center instead of employee which is the case in the IDOC.
Mapping from:
IDOC (1..1)
   E1PLOGI (1..unb)
     SEGMENT (String)
     OBJID (String)
     E1PITYP (1..unb)
       E1P0001 (1..unb)
         SEGMENT (String)
         KOSTL (String)
To this structure:
List (1..1)
CostCenters (1..unb)
    KOSTL (String)   ----> Mapped against KOSTL above
    Employees (1..unb)
      OBJID (String)   ----> Mapped against OBJID above
I expect several occurances of E1PLOGI which states multiple employees sent in the IDOC. I also expect several occurences of E1P0001 containing cost centers.
My conclusion is that I need an advanced mapping and I have created one which collects all KOSTL for the IDOC context, deletes duplicates, and creates the CostCenters segment. This is now working. But my problem is that I can't create the employees segment in the right place. They are only created once under the first CostCenters node.
Here's the java-code for mapping between KOSTL and CostCenters/KOSTL:
public void costCenters(String[] var1, ResultList result, Container container) throws StreamTransformationException{
Set set = new HashSet(Arrays.asList(var1));
String[] array2 = (String[])(set.toArray(new String[set.size()]));
Arrays.sort(array2);
for (int i = 0; i < array2.length; i++) {
    result.addValue(array2<i>);
Any ideas on how to proceed?
Best Regards

Hi,
Do the mapping like below.
UDF should be select as context.
List (1..1)
CostCenters (1..unb)
    KOSTL (String)   ----> Mapped against KOSTL above
    Employees (1..unb)
      OBJID (String)   ----> Mapped against OBJID above
Mapping:
KOSTL(RightSelectChange the context to E1PITYP)--UDF--Removecontext--CostCenters
KOSTL(RightSelectChange the context to E1PITYP)--UDF--SplitbyValue(Each Value)--KOSTL
constant---Employees
OBJID----------------------------------------------Use One As Many---SplitByValue (EachValue)----------OBJID
KOSTL(RightSelectChange the context to E1PITYP)--UDF---
KOSTL(RightSelectChange the context to E1PITYP)--UDF---
Regards,
Prakasu.M
Edited by: prakasu on May 20, 2009 3:28 PM

How to remove a font file and its mapping from XML Publisher Administrator

Hello,
I am trying to remove a font file and its mapping from the XML Publisher Administrator. If this is not possible, is there a way to disable it?
The reason why I am asking this is because we just got a new check printer, and I was able to print just fine. However, the MICR font was not coming up properly on the check, so I went ahead and configured the font with the XML Publisher Administrator. Now my check output is coming up blank after running the XML report publisher program. The only change I did was to upload the MICR font and mapped it.
My template and rdf report file are working fine in another environment we have, so I know that's not the problem.
Any help is appreciate it.
Thanks.

This is how you do it
Font
DELETE FROM xdo_lobs
where lob_code like '<Font_name>';
Font Mapping Set
DELETE FROM xdo_font_mapping_sets_TL
WHERE mapping_code like '<MAPPING_CODE>'

Mapping from context to VC

Hi everybody, I´m working in a mapping excercise where I want to map a data object in my context that has three header fields and one table to a Visual Composer view, I have no problems with the header fields because they are typed as xsd:string, the problem comes with the complex field (table) called Positions, for sure the 'Positions' type is not the same for the VC model and it never be, so my question is how do you make an input mapping from a complex field in the context to a VC,...
As you can see here is my mapping :
If I delete the 'Positions' mapping the build is ok, but when I map the 'Positions' field the build failed with the following message :
Ant build finished with ERRORS
com.sap.glx.paradigmInterface.bpmn.compiler.BPMNCompilerException: Mapping compilation failed!
[ERROR] Incompatible expression type.
Expected:Form.WS_Data_Object.Positions
Found:PositionType
Build stopped due to an error: com.sap.glx.paradigmInterface.bpmn.compiler.BPMNCompilerException: Mapping compilation failed!
[ERROR] Incompatible expression type.
Expected:Form.WS_Data_Object.Positions
Found:PositionType
MOIN forced shutdown initiated.
It says clairly that expect a Form.WS_DATA_Object.Positions (VC) and found a 'PositionType' from my context.
Do I need to cast every mapping !? How do you achieve that both types are the same !?
Any help will be appreciated.

I already change my WSDL (start message) to the Visual Composer start node type, and with that change I´m able to map:
start message -> process context -> VC,
all these objects have the VC types, so the question is....
do I really need to create the VC data and then set my wsdl and process context DO with those types !?
I was thinking in create a wsdl in my trigger then store the input values to a DO object of the same type and then mapping only the required displayed fields to the VC... but If I can´t modify the VC types to meet the context types all this is pointless and I need to recreate all my context into the VC isn´t !?
Any comment will be appreciated. !
thanks !

How to map from XML(xsd) to Service

Hi ,
when i try to map from generated Xml to Service input i am getting below error like
Failed to load "" type.
Please verify the fully-qualified type name is valid.
Details: "".
The type must derive from System.Web.Services.Protocols.SoapHttpClientProtocol.
The type must have the attribute System.Web.Services.WebServiceBindingAttribute.
thanks in advance
Chinna

Hi Ram, thanks for ur reply,
here i am sending multple fields data to <any> element typebecause of source will change every time in source data stucture type is
<root xmlns:apl='http://www.xxxx.in' xmlns:atl='http://www.xxxx.in/atl'>
<product apl:entity='Product' apl:onNew='' apl:match='database.byId(id, Product)'>
<id>id</id>
<name>name</name>
<external-id>externalId</external-id>
<parent-id>string i:parent=database.byId(i, Product)</parent-id>
<accounting-symbol>accountingSymbol</accounting-symbol>
<long-name>alternativeName</long-name>
<description>description</description>
<is-closed>isClosed</is-closed>
<accounting-code-purchase>accountingCodePurchase</accounting-code-purchase>
<accounting-code-sale>accountingCodeSale</accounting-code-sale>
</product>
<apl:reply>
<ImportAcknowledgement>
<atl:repeat select="database.updatedItems">
<product>
<id>{id}</id>
<external-id>{item.externalId}</external-id>
<success>{successful}</success>
<message>{error}</message>
</product>
</atl:repeat>
</ImportAcknowledgement>
</apl:reply>
</root>
in map i used masscopy functoid to map from Source Document root to destination Document root field.
the above total data is sent to destination. destination structre is
RootNode
TemplateId
TemplateName
Document
<Any>
after in logical ports i used to select existing ports and i deployed and in Bts admin i used SOAP adapter for sending the requset to Webservice .
here in this process iam getting the above error.
thanks
chinna

Has anyone seen changing map ids corrupting an HTML project?

I am working in RoboHelp8, and generating .chm help files to be attached to my company's software application. I built a map id file from numbers the programmer gave me. His calls have been able to use my generated files, but the "HH_HELP_CONTEXT called without a [MAP] section error message shows up when using context-sensitive help links.
What I've done so far:
I took a project from my backup server to replace the project that keeps giving me the map id error message (attached) when I hook it to the application.
1. I made some minor text changes to the file and generated, hooked it to the application, it ran ok.
2. I backed up the entire RH project.
3. I opened the project again in RH, and tried to make some necessary changes to the map ids. This seems to be the problem area, because after making the changes and regenerating, the error message reappears. Plus, when I reattach the generation from step 1, the one
without the map id changes, it fails too.
It appears to me that changing map ids within RoboHelp does something to corrupt my project. I have noticed that behavior is strange when I
attempt changing map ids. The destinations disappear unexpectedly, map ids say Unassign when there is no destination, etc. I have tried
deleting all 20 of them and mapping them again, with no different result.
Do you know anyone who has experienced this?
Better yet, do you know an expert in the San Francisco Bay area who I can consult with?
The application my organization is developing is supposed to be put on CD today, so this is a huge problem, impacting the whole team. Any
ideas you may have would be welcome. - Caroltypesetting

See if this thread helps.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Copying maps from dev to prod

owb version 9.2.0.2.8
oracle version 9.2.0.5.0
SunOS 5.9
I am working on a "move to production" process which will accomodate a major release
as well as minor enhancements/bug fixes.
I have one project and two modules - development and production. I will be using
unix shell scripts and sqlplus_exec_template to exec maps.
I make ddl changes outside of owb and import them into the development or production modules.
In the design repository, I am wondering what is the best way to "copy" maps from
development to production???
I have tried the manual "copy" within the design repository client and found it
generates no errors but lots of warnings.
VLD-1008 referenced mapping column <x> does not exist
VLD-1003 reference <x> between mapping object and repository object does not exist
I can deploy the map with these warnings and when executed it populates tables
correctly in the production environment.
Should I worry about the warnings?
I haven't tried export/import yet - my impression is that this is not for just one
or two maps. And will I get the same warnings?

I'd recommend you take a look at this case study... http://www.oracle.com/technology/products/warehouse/pdf/Cases/case9.pdf
You may want to rethink how you manage development and production. There are a few reasons ...
- When you copy a mapping from one module to another in the same repository, the operators inside the mapping will have to be reconciled to remove those warnings
- In the GUI, you can only copy one object at a time
- You can't compare objects between development, production, and any other environments you have.
You probably want to consider using snapshots as decribed in the "mature phase" in the case study.
At my company, we are using the initial phase to control changes. We have a Design Repository for each environment and each environment has multiple modules. As in your situation, our DDL is defined outside of OWB and we import object definitions into the repository.
Anyway you go, it'd be a good idea to make use of OMBPlus to automate some processes (creating/restoring snapshots, export/import mdl, reconcile maps to objects, deploying maps, etc).
You can find other OWB Case Studies here...
http://www.oracle.com/technology/products/warehouse/htdocs/OTN_DocResources.html
Also, take a look at "Querying the Warehouse Builder repository" in the OWB Exchange. You can use that to compare the objects defined in OWB with those defined in the database. It has been very helpful to for us.

Printable Maps from MapViewer - 600dpi

Hi -
We would like to create print quality maps from MapViewer in the 600 DPI range. We've noticed that MapViewer will bomb out if we specify an image size over 2000 px in size, which means that at 600 dpi, the largest image would be about 3 inches square.
Also, as larger images are created (larger meaning more pixels x pixels), the markers and text size get relatively smaller. I would think the size of these features would be based on the DPI setting when they are rendered. Is there any way to change the DPI for a request, or plans to support such a thing?
Thanks,
--ee

Thanks to all for the replies.
In response to the first reply, when importing the shapefile I select the default styling which I think is generally a red color for the content. Nothing out of the ordinary there.
For the themes, I actually tried it both ways. First just importing without the theme creation and doing it manually. I also tried it using the flow generated by the utility and still no luck.
The map renders beautifully in the MapBuilder tool. I can preview it and move around although the zoom in and out does cause some of the layers to drop. So everything is perfect until I try and view it in an AJAX enabled page.
I thought that the scaling factor may be a source of the problem but my question is how do you know what to use for the minx and maxx parameters? The SRID that I used was the WGS84 which is something like 4326. This is actually selectable when doing the import with the MapBuilder tool.
So is there a rule of thumb for chosing the minx and maxx parameters? Also, do you set the minx and maxx in the MapBuilder or are these properties for the mapviewer page?
Tim

Creating Change request from an Issue

Hi, all.
We have created new transaction type for change request (SDCR at default) and have specified it for usage in parametre CHANGE_REQUEST in DNO_CUST04.
However, creation of a change request from a issue (problem) ignores this customisation. As has shown code research - the constant there is used.
Whether there are to it reasons or notices in the documentation?
Whether there was for you such problem and how you solved it?
Regards,
Konstantin

You need to maintain Transaction Types Mapping. Map your target procedure type (ZDCR) to your source procedure type (e.g. SLFN or ZLFN).
Do this in IMG task "Define Mapping Rules for Copy Control"

Can I execute a mapping from a database trigger ????

Can anyone tell me if I can execute a mapping from a database trigger ? How ???
Thanks in advance.----
JEMD

Hello,
We are using the approach of scheduling predefined job heavily in our projects. It works fine.
There are several points to mention:
- scheduling / rescheduling algorithm must not lead to simultaneous session of the mapping run. Depending of content of the mappings/PF this could bring the real pain.
- If there are several user sessions intensively interacting the table on which the scheduling trigger is created, scheduling / rescheduling algorithm must be written with care users could lock or wait each other while updating job record.
- Depending on intensity of such mapping runs additional care must be taken of OWB audit trail which will tend to grow.
Depending on requirements trigger could call ordinal procedure for scheduling (if mapping run must be performed only if user commit change to the table), or procedure with autonomous_transaction pragma (if any touch of the table should fire the execution dont think this is a case)
Sergey

Change Maps from KM to Miles

Similar Messages

Maybe you are looking for