Change master CC01

Hi all,
we have created an alternaive BOM with a validiy date in the future & we have also created objects in the change master with tcode CC01. My problem is that the BOM and all planned orders lose their components on the date of the validation.
We suspect this problem occured after upgrading to ECC 6.0
Thanks in advance for your help
YAm

dear,
in CC01, Once you create a chnage master and create BOM using chnage number, then you need to release chnage number, then only it will be effective. In CC02, make the status as release, then it will work

Similar Messages

Function module for Change Master (CC01) creation

Hi all,
Pl. tell me function module or BAPI for 'Change Master' Creation. It is linked with BOM to record BOM changes. Its Tcode is 'CC01'. Pl. reply.
Regards,
Darshana

try this...
RFC_CREATE_CHANGE_MASTER

Problem in Creation of Change Master Record in CC01 (ECM)

Hi folks,
me got a problem. whenever i create a Change Master Record using the transactuion code cc01, Change Master is generated but it is not updated to the database and instead throws up a dump error.
Regards,
maximus.

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

CC01 Change type is in hide mode for Change master

Dear All,
Our requirement is to get the list of Change type in the CC01 T-code when we click the change master. When we select ECR then we are getting the change list of change type. But, when we select the change master as type, then change type is coming as grey field. So we want the list of change type in change master
Please suggest
Regards
Honyal

Hello Honeyl,
Try to understand the logic of ECR (engineering change request).
*Change Type*
    This key defines the change type for the ECR (engineering change request).
*Dependencies*
    If you change objects with reference to an ECR, you control the change process using the following statuses:
    o   System status
    o   User status, if the change type has a status profile assigned to it
        in the IMG
    The system performs workflow tasks if defined.
    Note:
    You can only replace the change type with another change type if the
    following data is identical in both change types:
Status profile
Workflow task
Signature network
You can replace a change type without a signature network by a
change type with a signature network.
It means when you are intended to use the ECM with Statuses like CHKD ECRA ECOP And wish to maintain the controls like ECR to ECO creation and approval then the ECR and statues are required and supported also. the change type decides the different Statuses for the ECR. Hence the change type will be not available with Change Master, where these all status management are skiphence the change type decides the different Statuses for the ECRed and designed for simple change request for which the simple Change master are quite enough.
Kindly go through the Glossary help for them both.
Change Master:-
Data record which contains all the information required for managing a change.
It contains descriptive data (such as reason for change) and data with control functions (such as valid-from date and indicators for object types). In addition to this data, which you can maintain directly, there is also data which the system updates automatically (such as administrative data).
ECR:-
Change master record created with reference to a change type, which defines a specific procedure for the change.
You cannot process change objects with reference to an engineering request (ECR). The person responsible must approve the ECR and convert the ECR to an engineering change order (ECO).
Regards,
Shyamal

Bapi for Change Master

Hi Experts
Is there any BAPI for posting data of Change Master Transaction Code : CC01.

Hi,
Use this FM.
BDS_BUSINESSDOCUMENT_CREATEF
BAPI_ECMORD_CREATE BAPI
RFC_CREATE_CHANGE_MASTER
Regards,
Raj.

Change master with release key

Hello,
When change master is created with release key, changes to material master is not possible.
However changes to BOM are possible. If someone wants to make changes possible for material master with release key then how one can do that?
Thanks in advance,
jagruti

Dear,
You can create a change master using t-code CC01 and you can maintain and you can maintain the revision level in the objects. Then using this change master you can change the material master . Then automatically the system will create a new revision level.
Using T code CC11 - Create Revision Level ,we can maintain the revision levels.
One more way of doing this is ,using MM02 T code,after going into Basic 1
view,just below the material field,you can find the creation button for revision level
You can come to CC02 T code enter the change number set the Release key values as 01.
Hope clear to you.
Regards,
R.Brahmankar

Discontinuity Change Master

Hi to all,
I did a discontinuity master change for a material in the BOM(substituing a code with a new one), having already for the substituted material a Purchase Order.
Running the MRP I saw that the system doesn't consider the quantity in order (to consume all the remaning stock) but the system takes the requirement quantity from the new code inserted in the master change
Anyone can help me to solve this issue? How can I drive it from the customizing?
Thanks a lot
M.

Dear,
You can create a change master using t-code CC01 and you can maintain and you can maintain the revision level in the objects. Then using this change master you can change the material master . Then automatically the system will create a new revision level.
Using T code CC11 - Create Revision Level ,we can maintain the revision levels.
One more way of doing this is ,using MM02 T code,after going into Basic 1
view,just below the material field,you can find the creation button for revision level
You can come to CC02 T code enter the change number set the Release key values as 01.
Hope clear to you.
Regards,
R.Brahmankar

Activating ObjectKey's in change master with Release Key.

Hello Gurus,
I would like if SAP has come up with any solution for activating Object key for other objects apart from the standard BOM along with the release key.
Scenario:
I want my Engineering Record to create a change master with the Release key and use same the change master for making changes to Documents along with BOM. There is an OSS note 1767458 - WebUI: Object category enhancement for packages, release key for PLMWUI 746 and not for later versions of PLMWUI ( PLMUI 747).
Kindly advice.
Thanks & Regards
Jo

Dear,
You can create a change master using t-code CC01 and you can maintain and you can maintain the revision level in the objects. Then using this change master you can change the material master . Then automatically the system will create a new revision level.
Using T code CC11 - Create Revision Level ,we can maintain the revision levels.
One more way of doing this is ,using MM02 T code,after going into Basic 1
view,just below the material field,you can find the creation button for revision level
You can come to CC02 T code enter the change number set the Release key values as 01.
Hope clear to you.
Regards,
R.Brahmankar

I am trying to create a master password on a new machine, but all I get when I hit enter is this message: "Unable to change Master Password".

Pretty much as per the question, when I try and set up a master password, the error message says "Unable to change Master Password". There isn't one to start with, so I'm just wanting to set one for the first time.

Did you copy any files from another computer to the profile folder on that new computer?
Do you already have saved passwords?
*Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
If you haven't then try to delete the key3.db file and possibly logins.json and signons.sqlite in the Firefox profile folder.
Note that all saved passwords are lost when you delete these files.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox

ECM: Change Master Record in Production Order

Hi
I have created a Change Master Record and made change to the BOM with respect to that change master record.
Now I want the Change master record (Eg. 001) to be visible in the production order (Master Data tab) when the production order is created.
Also, I would like to know if I can change the change master record (to say, 002) in the Production order so that the BOM with respect to that particular Change master record is selected.
Thanks a lot for your help..
Tom

Hi Jack
I think at the time of creating Change master record u haven't maintained the Object types.
In that View u have to maintain Tick at the check box of Actv., Object & MgtRec of Object types-- Bill Of Material & Task List.
This will resolve your problem of Change Master Record Display at the time of Production order Creation at View of Master Data.
Parminder Sikarwar

Trying to link large file to email. keep getting asked for master pw to security device. I have changed master pw on firefox and TB but still same response.

I have tried over and over to send this large file. I've never synced before so i got that all set up. Then asking for master passwork to security device. Don't think I had ever set up an account so did that and created password. When trying to send the email I ask to link it goes to 'box' and I authorize thunderbird to use use it. then it ask for master password and I type that in and it doesn't work. I have reset master pw for firefox and thunderbird and still can't get it to work. I really don't know what I am doing here so any help is greatly appreciated. Thanks!

In my previous response, I gave a link to this website page:
http://kb.mozillazine.org/Master_password
It contained some information about what to do if TB keeps asking for a 'Master Password' which was never set. This was an old bug that was resolved years ago, so it is surprising you are getting it assuming the Thunderbird Master Password was never set.
However, your comments are confusing because they are conflicting; in your question you say:
'' I have changed master pw on firefox and TB ''
This implies you set a master password in Thunderbird and changed it, but in last comment you say you never defined it:
'' I have used the Firefox direction to eliminate the master password, which I never defined in the first place,''
I'm not sure what you mean by 'I have used the Firefox direction' - perhaps you mean the link I gave. As of course we are not talking about firefox :)
So, at this point, it is hard to know what you did because you are posting conflicting information.
Using info at the link, I presume you tried this:
quote
''Thunderbird: Choose Tools -> Error Console, paste the expression: openDialog("chrome://pippki/content/resetpassword.xul") and press the Evaluate button. That will open a dialog asking you if you want to reset your password. ''
quote
''If that doesn't work exit Thunderbird and delete the '''key3.db''' file in your profile.''
Did you do this? You do not say if you did this.
At no point does it say uninstall Mozilla Thunderbird program, so I do not know why you would do it. Uninstalling the Program has nothing to do with your Profile for very obvious reasons.
'''More clearer instructions on how to delete the '''key3.db''' file.'''
Make hidden files and folders visible:
* http://kb.mozillazine.org/Show_hidden_files_and_folders
The AppData folder is folder is a hidden folder; to show hidden folders, open a Windows Explorer window and choose "Organize → Folder and Search Options → Folder Options → View (tab) → Show hidden files and folders".
Assuming your Profile was stored in the default place, it can be located here:
* C:\Users\Windows user name\AppData\Roaming\Thunderbird\Profiles\Profile name\
Thunderbird must be closed before doing anything in the Profile folders.
If you have since reinstalled Thunderbird, you can also use it to get quick access to your Profile folders.
In Thunderbird
* Help > Troubleshooting Information
* click on 'show folder' button
* '''Close/Exit Thunderbird - this is important'''
* Look for and delete this file : '''key3.db''' file.
* Restart Thunderbird.

How to delete an object from a change master?

I have a situation where a PDM has copied a route (task list) that was tied to a change master and brought it over by mistake, the route was also copied to the wrong group number and counter. What I want to do is have the route deleted and recreated with it's own group number and counter 1, however because it is linked to a change master it keeps pulling in that same group number. Any idea how to correct this or remove the material from the change master, we've tried to delete the object but get the message that not all objects were deleted and it is still there.
Thanks in advance.

HI sathish,
1. If the old request is release,
   then we cannot do anything.
(There is no point in changing that old request)
(bcos its already released)
2. what can be done is that
   u save once again the objects,
   and it will once again ask for new request.
3. this time save it in new request
regards,
amit m.

Extracting changes from Change Master and importing to another BOM

Dear All,
Our client uses ECM and manages two BOM's the Engineering BOM and Production BOM.
The Engineering BOM s are changed through change number. We need to import these changes to the production BOM, (only the changes) through another change number
This means,
We have the Engineering BOM (No plant, usage 2) and Production BOM (Plant BOM with usage 1)with the same structure (BOM header is Z)
Header : Z
Position 1 :A Qty 1
Postion 2 : B Qty 1
Both initially had components A and B, each with Qty 1.
Now with a change number, the Engineering BOM is changed, a new component C is added, the quantity of A is revised to 2.
Now the Engineering BOM is
Header : Z, Plant ( blank) and Usgae 2
Position 1 :A Qty 2
Postion 2 : B Qty 1
Position 3 : C Oty 1
Our requirement is to extract the changes from the Change master, ie, the extract should say BOM header Z is changed,
New position 3 : C Qty 1,
Modified Position 1, Qty 2.
This should have only the changed information and we want to input this to the Production BOM, through another change number to change the Production BOM.
We want this process to be automated, in the sense, user enters the Production BOM header, Plant and usgae 1 and the new change number, then the BOM will be updated with the changes in the engineering BOM.
My Questions are
1- How to get an extract from the Change master with only the changes file, to a txt or xml or any format?
2- Apart from manually updating the Prodcution BOM by seeing the changes from Environment ->Reporting ->BOM changes of the Change master of the Engineering BOM, is there any other way to update the Production BOM only with the changes?
3- Ideally we want to import the changes to the Production BOM rather than deleting the items and again copying from Engineering BOM. What is best practice used in this scenario?
Any suggestions would be helpful
Regards,
Aby Thomas

Dear Mario,
Got ur point.. This is of course possible.. Practicallyboth the BOM's are not exactly identical. Tere is one more BOM apart from the Production BOM.
And there is a need to transfer the changes ( changes alone ) between BOM's.
Further more, there are interface from SAP to other systems, where they alos requires the BOM changes.. So the requirement arises, how to transfer the changes between BOM and also to other systems from SAP.,
If we do not have any interface from legacy PDM, how to extract the changes from the change master?
What is the general practise followed?
Regards,
Aby Thomas

I tried resetting my Master Password using "chrome://pippki/content/resetpassword.xul", but when I click on "Change Master Password" it asks for my CURRENT password. I don't have a current password, because I don't remember it and am trying to reset it!

Using FF 4.01 for laptops & desktops, Windows XP 2002 SP3. I used "chrome://pippki/content/resetpassword.xul" to reset the Master Password. Then went to Tools/Options/Security, clicked on "Change Master Password". BUT it asks for my CURRENT password and new password. I don't know my current password. Is there a default Master Password that I need to input as the Current password?

If you still have a Master Password set then it looks that resetting the MP hasn't worked.
If using the chrome url (chrome://pippki/content/resetpassword.xul) doesn't work then delete the files [http://kb.mozillazine.org/key3.db key3.db] and signons.sqlite in the Firefox profile folder.
* http://kb.mozillazine.org/Profile_folder_-_Firefox.
You need to set a new Master Password after renaming or deleting key3.db and all currently saved passwords are lost.

How to Inactivate changes made by Change Master

Hi Guru's,
We use Change Master (no system status & release approach in use). If a BOM is changed with CM & data manager wants the change to be inactive (Planned Orders/ process orders should not copy the data of this CM), what could be the solution.
Thanks,
Kart.

Hi,
Create the CM with Release key so that with release key you can control. If you want to release the changes you can release at any time,but once released you con't revoke the same.
revert me if any issue
Regards,
Ravi

Change master CC01

Similar Messages

Maybe you are looking for