Change matching type line color

Hi! How can I change the line color in a matching type quiz in Captivate 6? Those lines that connect the items from column A to B. Thank you!

Hello and welcome to the forum,
Have bad news, I never found a way to change the line color in mathing type questin slides.
Lilybiri

Similar Messages

  • How to change series or line color in excel 2007 using ActiveX

    I am trying to change series color using Excel 2007 with ActiveX as below. It seems the color cannot be controlled correctly. For example, if I chosse red color, my curve will be changed to blue. Any ideas?
    Also, I googled and found a guy ran into similiar problem using VBA for Excel 2007. See the link below:
    http://help.wugnet.com/office/change-series-line-color-excel-2007-vba-ftopict1062646.html
    Set ch = Worksheets("Chart").ChartObjects(1)
    Set objSeries = ch.Chart.SeriesCollection(1)
    objSeries.Format.Line.ForeColor.RGB = RGB(255, 127, 0)
    According to the post, it need to be done as follows
    objSeries.Border.Color = RGB(255, 127, 0) . But I cannot find the border property/method in ActiveX.
    The color seems to be abitrary. and I found the 

    Xubuli,
    I looked into your question and confirmed that Border.Color is not located under the Excel.Series library. Instead, you must locate it under _Worksheet.UsedRange as seen below in the figure. I am attaching the VI file where I located the the Border.Color property node, and I am also including a SubVI on the block diagram that goes into explicitly set the cell color and border. This SubVI can be found under Programming>>Report Generation>>Excel Specific>>Excel Format>>Excel Set Cell Color and Border.vi, if you have the Report Generation Toolkit installed. I hope this helps.
    Larry H
    Applications Engineer
    National Instruments
    Attachments:
    CellBorder.vi ‏8 KB

  • How do you change Matching Tag Highlights color?

    I just updated my Dreamwever CC.
    I have my code coloring set to be dark. I don't like too much white as the background when I'm coding...
    with the new update, I spotted the new change right away, it's great, I like the idea of highlighting matching tags, but I want to change the color to match my color theme and so I can read my codes. this is what I have...
    would someone know how to change the color? thank you.

    You can change the color of the tag highlight by
    Go to DW preferences
    Choose Code Coloring
    In the bottom you will see tag highlighting enabled with a check mark
    Change the color by using the color well below that Tag highlighting preference

  • Horizontal grid lines color in a spark List

    Hello,
    How to change horizontal grid lines color in a spark List using css
    Thanks

    Hello,
    How to change horizontal grid lines color in a spark List using css
    Thanks

  • Changing graph type, color change

    Why when I change the type of graph it changes the colors automatically. I had blue, green, red (in the 3d fills) for a bar graph respectively representing 2009,2010,2011. I am adding this year I wanted to switch to a line graph - why are the colors changing auto to add a yellow and making 2012 red? How can I stop this? I find it quite difficult to change the colors of all the lines/symbols using the 3D fills, actually it doesn't work very well @ all, so I would prefer not to have to do this for 10 graphs per client @ 5 clients. Is there a more efficient way to accomplish this?
    Also brings me to my next question. I was attempting to use the copy style, paste style function with the graphs - to ease the pain of all of this. When I do that it only pastes the axis scale (exactly what I don't want copied)! Is there a way to c&p the STYLE...the colors, weight, and data symbols of the lines. Therefore if I must do all the color change manually I would only have to do it once?
    Thanks so much.

    Here's an example, using a Line Graph.
    The first graph uses the full table, which has a column for each year, and extends to 2017, using 'placeholder data.'
    For the second, all of the data, and the header labels (year) was deleted from the table.
    Not good for presentation (nor was the table with all those empty cells), so columns E (2012) to J were selected and Hidden.
    When data became available for 2012 (ie. about 10 or 11 months from now), the hidden columns were Unhidden, the label and data were entered into column E (2012), and columns F - J were again Hidden.
    I haven't tried this with bar graphs yet. A closer look at the structure of your data and a screen shot of a sample bar graph would be useful in avoiding a 40 day trek through the wilderness.
    Regards,
    Barry

  • How do I change legends in line charts when you change line type

    I have created a line chart with two lines. I only have a black and white printer. If I change the two lines to black, the legends change to match. To distinquish the two lines I change the line type making one dots and the other dashes. The lines change but the lengends don't. This makes the graph useless.
    Any suggestions on how to get the lines in the legends to change to match the lines in the graph?
    Thanks for any help.
    Paul

    I could not get the line legends to differ either. You can add a marker to only 1 of the plots though:
    Regards,

  • TABLE CONTROL LINES COLOR CHANGE

    <i>Hi Friens.,
    I need small help ie.,
    Let us assume we have table control like this.,
    col1 |  col2  |  group |
    a1   |   b1   |  1
    a2   |   b2   |  1
    a3   |   b3   |  2
    a4   |   b4   |  2
    a5   |   b5   |  3
    a6   |   b6   |  3
    1) User need differentiation between groups to look and feel.,thats why I want to change the Line colors based on Group.,
    2) I am getting this one .,but I made case on Sy-stepl.,  while scrolling it is not showing correct .,
    3) Is there any good way to do this., like in ME21   CONDITIONS TAB at Item level</i>
    If any body have Idea., share with me.,
    <b>Thanks.,</b>
    <i><b>Surendher Reddy.Baddam</b></i>

    Re: TABLE CONTROL LINES COLOR CHANGE
    Posted: Nov 5, 2004 6:47 AM        Reply      E-mail this post 
    PBO >>>like thise.,
    LOOP AT itab WITH CONTROL tc4_400 CURSOR tc4_400-current_line.
    MODULE check_rej_hld_400.
    MODULE radio_checkbox_400.
    ENDLOOP.
    >>>
    MODULE radio_checkbox_400.
    DATA : l_stf TYPE i.
    DATA : l_hyd TYPE i,l_knr TYPE i.
    l_hyd = 1.
    LOOP AT SCREEN.
    IF screen-name = 'ITAB-BATCHNO'.
    IF itab-group = l_hyd. " this is group
    screen-intensified = 1.
    MODIFY SCREEN.
    ELSEIF
    screen-intensified = 0.
    MODIFY SCREEN.
    ENDIF.
    ENDIF.
    ENDLOOP.
    ADD 2 TO l_hyd
    ENDMODULE.
    I made logic like this.,
    Thanks.,
    Surendher Reddy.Baddam

  • How do I change the line color in a chart in Numbers on my iPad?

    How do I change the line color in a chart in Numbers on my iPad?

    Whenever I try to shift+direct select it thinks I want to move the line, so as I shift + direct select and drag my mouse across the line (to highlight it all) it moves a chunk of the line and turns it into a near perpendicular line.
    I found the appearance window, it just says "Path" (the color I want it to be that it's not)
    "Stroke" 4pt
    "Fill" (the color I want it to be that it's not)
    "Opacity": Default
    And some other buttons. I think I'll try the help line tomorrow, I know I saw a customer service number somewhere and I'm only here because the chat was unavailable. This is only one of my 3 problems with my assignment so I'll search here for answers to the other two. Learning new things is rarely fun.

  • Changing line color on XY plot

    This should be something really simple. I simple created a property node, set the active plot, and set the plot.color. What happens to some plots is the points change to my specified color and other stays as my background plot color which is white. I cant seem to get the line color to change with the point color. There are ways I can change it at run time, by right click on the plot and going into properties and setting line color in that tab.
    What am I doing that I cant get this to work at runtime?
    I attached the plot, just ignore all the missing VIs you should be able to see the problem.
    Attachments:
    SteadyStatePlot1.vi ‏350 KB

    It works just fine here using LabVIEW 7.1. Could you do us a favor and make a mini demo, just containing the xy graph, some data for it, and the related property nodes to demonstrate your problem.
    Overall comment on your VI:
    Sorry, but I am absolutely horrified by your code. I cannot believe that you need all those property nodes, especially the signaling ones, they should be used very sparingly. (For example the FOR loops on top center and in the event called "clear all points" are just pumping hot air, repeating the same action and signaling (!!) every iteration.) It also just cannot be healthy if a single event calls tons of signaling properties, such as in the above mentioned event case. Then, in the timeout event, you are rewriting the plot la
    bels and names every 10 ms. Do they really change that often???
    Please let us help you in your overall program design. It will make a big difference in your future, more complex projects if certain common desing misconceptions are not propagated. I think entire sections of your program can be deleted without loss in functionality, the code can be stripped to <20% and the CPU usage can be reduce to <2% of the current situation. Just my wild guess.
    The above is well meaning criticism, so don't take it personal. I am much harsher looking at my own early code from 8 years ago. :-) Good luck!
    LabVIEW Champion . Do more with less code and in less time .

  • Make changes to the line item depending upon doc type n sp. GL ind in F-48

    I want to make changes to the line item depending upon the document type and special GL indication for the transaction code F-48.
    Depending upon document type and special GL indicator i want to calculate the work contract tax during simulation in transaction code F-48.

    Hi,
    You want to deduct WCT when you use particular document type and special gl indicator.
    I just want to know the reason why you want to determine the WCT based on the above conditions.
    I created WCT as withholding tax types and assigned to vendor master. So when the user booking transactions he will choose the respective WCT tax type and tax code so system will deduct the amount and the same updated in WITH_ITEM.
    Or you made a down payment request through T.code F-47 and when you want to book the actual transaction in F-48 then choose line item from down payment request.
    Give me your requirement in clear if the above is not clear
    Regards,
    Sankar

  • My typewriter toolbar is graying out the ability to change font size, type, and color.

    My typewriter toolbar is graying out the ability to change font size, type, and color.

    Here's what I have done in the past. Maybe not elegant, but
    it works. (I
    use PHP, but I'm sure you can modify for ASP.)
    In the HEAD of each web page, include regular old embedded
    STYLE tags,
    but INCLUDE an external PHP file:
    <head>
    <style type="text/css">
    <?php include('styles/testcss.php'); ?>
    </style>
    </head>
    Now in that included PHP file, just have CSS code which pulls
    in your
    dynamic data. Here's an example snippet:
    body {
    color: #600;
    background-color: <?php echo
    $row_recordset['bgcolor'];?>
    Of course, you'll need the code for the recordset somewhere
    too.
    Alec
    Adobe Community Expert

  • How do I change the white background color in a b/w line drawing jpg?

    How do I change the white background color in a b/w line drawing jpg?

    Just put a Solid Color Layer atop it and set it to Blend Mode Multiply or
    • load the Channel with the best contrast (cmd-click it in the Channels Panel)
    • invert Selection (cmd-I)
    • create a black Solid Color Layer
    • put whatever below that Layer

  • Change line color in alv.(urgent)

    Hello , i want the line color to change when my cursor change lines in an ALV.Thx

    Hi,
           Check this website
    http://www.geocities.com/mpioud/Abap_programs.html
    reward points if useful,
    Regards,
    Niyaz

  • How can I use srvctl command line for change "Failover type" and "F method"

    Hi all,
    I am using Oracle One Node (11.2.0.3), and I have a service:
    /u01/11.2.0/grid/bin/srvctl config service -d orcl
    Service name: orcldb
    Service is enabled
    Server pool: orcl
    Cardinality: 1
    Disconnect: false
    Service role: PRIMARY
    Management policy: AUTOMATIC
    DTP transaction: false
    AQ HA notifications: false
    Failover type: NONE
    Failover method: NONE
    TAF failover retries: 0
    TAF failover delay: 0
    Connection Load Balancing Goal: LONG
    Runtime Load Balancing Goal: NONE
    TAF policy specification: BASIC
    Edition:
    Preferred instances: orcl_1
    Available instances:
    I would like to change "Failover type" and "Failover method" to:
    Failover type: SELECT
    Failover method: BASIC
    How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
    Thanks in advance.
    Leonardo.

    user10674190 wrote:
    Hi all,
    I am using Oracle One Node (11.2.0.3), and I have a service:
    /u01/11.2.0/grid/bin/srvctl config service -d orcl
    Service name: orcldb
    Service is enabled
    Server pool: orcl
    Cardinality: 1
    Disconnect: false
    Service role: PRIMARY
    Management policy: AUTOMATIC
    DTP transaction: false
    AQ HA notifications: false
    Failover type: NONE
    Failover method: NONE
    TAF failover retries: 0
    TAF failover delay: 0
    Connection Load Balancing Goal: LONG
    Runtime Load Balancing Goal: NONE
    TAF policy specification: BASIC
    Edition:
    Preferred instances: orcl_1
    Available instances:
    I would like to change "Failover type" and "Failover method" to:
    Failover type: SELECT
    Failover method: BASIC
    How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
    Thanks in advance.
    Leonardo.srvctl modify service -d database_name -s orcldb -q TRUE -m BASIC -P BASIC -e SELECT -z 180 -w 5 -j LONG
    Also see
    11gR2(11.2) RAC TAF Configuration for Admin and Policy Managed Databases [ID 1312749.1]

  • How can I change line colors in HTML reports?

    I have a VI that is creating an HTML report based on a table of results. I change the back ground color of the line based on failed results. However this line color change is not seen in the HTML reports. Can anyone give me a good way of basically transferring the properties of my table to the HTML report? Is it possible? Thanks in advance for any help.

    Greg - Thanks for the reply. I figured this out doing some more research. The line that I needed was "<BACKLOG="#PAYOFF">Your Cell Text</ID>. The problem I was having was that line is needed in front of the rest of the font formatting commands. For example here is my original line:
    <ID WIDTH="200"><BACKLOG="#PAYOFF"><FONT SIZE=+0 COLOR="#OFF">8.3.12.1</ID>
    The bold part in the line above is what I added. With the cell color added like this it actually created another cell and pushed existing ones one cell to the right. It then colored the second cell in the row and left the first one blank. Through looking up more examples I found that I was actually putting the cell color command in the middle of the font formatting command. So I tried putting it at the end and it then did nothing. The only way I could get the cell in the table to change and not change anything else was using the syntax below.
    <ID BACKLOG="#PAYOFF"><WIDTH="200"><FONT SIZE=+0 COLOR="#OFF">8.3.12.1</ID>
    Troy

Maybe you are looking for