Change Materail PO text in PR/PO

Hello,
I have maintained Material PO text in Material Master.After creating PR/PO it gets copied in PR/PO automatically.
My requirement is after changing the Material PO text in Material Master it should get copied to the old PO which is already saved.
Thanks for providing some inputs.
Regards
Amar

Hi,
My requirement is after changing the Material PO text in Material Master it should get copied to the old PO which is already saved.
try this,not sure
open saved Po in ME22N,remove material code ,enter and again add same material code ,
other than this not possible
Regards
Kailas Ugale

Similar Messages

Changing quiz button text

I am working on a series of tutorials and quizzes for our
client, I want to change the text on the "Next" button on the
quizzes. It appears easy enough, in the options, Next button text
field, I have entered what I want, but it still appears as "Next"
when I publish it. Am I an idiot?
Please help.

This may be a stupid question, but did you save the file
before you published? I have sometimes had instances of not saving
and publishing first and my changes are not reflected.
Also, if the buttons were already on the screen with the text
"Next" when you decided to change the button text, you'll need to
delete those buttons and then add them again. The text does not
update dynamically.
Worst comes to worst, you can manually change the button text
with a double-click or through properties...
Hope that helps.

How to change the default text title of Detached table/treetable

Hi,
Is anybody know How to change the default text title of Detached table/treetable.
I have already read the post on "http://vtkrishn.com/2010/07/28/how-to-change-the-default-text-title-of-detached-tabletreetable/"
as per this post It will change the title throughout the application.
I wanted to change only for one particular table.
Thanks,
Charu
Edited by: Charu on Sep 13, 2012 4:14 AM

Hi,
please don't double post and instead continue with your original threat. In the previous post you got the correct answer to use skinning. You did not like the solution as it doesn't allow per-instance titles. I agree with this and a logical consequence is to file an enhancement request instead of re-posting the question. I'll file the ER, so no need to follow up for you anymore
Frank

Find Change through external text file

Hello folks
I am bit pretty in InDesign scripting so could you please look into this.
How can i change any particular text field in Indesign CS3 document from text file.
I do have find change script but for each InDesign document specific text file is assigned.
So each time i have to modify find change GREP property that is also repetetive of work. Is there any way to get find change information should be extract from external text file.
Many Tanks in advance

In the FindChangeByList script, you could customize the function myFindFile(myFilePath) {...} as to search the FindChangeList text file in the document location rather than the script location. That's an example. The question is: given a document, where will you have the corresponding FindChangeList?
@+
Marc

Smartview 11.1.2.5- Cannot change value in Text-List Dropdowns- Excel Crashes

Using latest/greatest Smartview with 64-bit Office and Windows 7. I have a native essbase app utilizing text-lists. I am trying to update text-value through smartview. Smartview automatically produces a drop down to select a value from the linked text-list. However- as soon as a different value is entered or selcted in this cell with the drop-down list- Excel crashs. I have reproduced this consistently everytime. I have no way to change values for text-measure accounts linked to text-lists. I feel this is and incompatabiliyt issue with office 64-bit.

SmartView using the forms. It appears this issue has been logged as issue number 6566082 as seen here: http://docs.oracle.com/cd/E17236_01/epm.1112/readme/sv_1112200_readme.html
But I can't seem to find out where I can get information on the status of this issue and whether it's been patched in future versions.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

How to change the default text "There are no items to show in this view" in the visual webpart

Hi,
I am using a visual webpart and in that if there are no items in the list it is showing the default text "There are no items to show in this view." I want to change this default text.
I checked the forums here there are multiple ways are shown but no one is working for me.
Kindly help me to change this text.
Thanks in advanced.

It seems you're retrieving items inside a specific you.. why not having a <div> inside you're visual web part and check to see if the count of items retrieved is > 0 then insert that in the div, otherwise, insert your custom message and not rendering
the web part itself. What you're describing is the default message from SharePoint which comes from default views, and this can be changed from xslt in SP 2010 or in JSLink in SP 2013, here's a link how to do so in JSLink :
http://www.idubbs.com/blog/2015/jslink-csr-to-override-there-are-no-items-to-show-in-this-view/ .
But as said, since you're doing a visual web part, keep your stuff in the visual web part and check for the count of items before adding the rendered data to your div.
Mohamed Derhalli
SharePoint Consultant
Blog: SharePoint Thoughts
Twitter:
LinkedIn:

How to change a labels text which created at runtime?

hi,
i am creating label controls in runtime dynamically and adding them to a group component. this group component is in another custom component and i have lots of custom comp. in my app.
my question is how can access (via id) and change a labels text whict created at runtime?
i can change like this but i am setting id's and want to reach via id.
var lbl:mx.controls.Label = mx.controls.Label(subMenu5.group_subMenu5.getElementAt(1));
lbl.text = "good job";
thank you, have a good day.

First off, if you are already using a Spark Group, I would suggest you use a Spark Label instead of an MX Label. If you want to reference the Labels from the group, loop through the group's elements and check the if the element id matches the Label you want to assign text to.
var lbl:Label;
var n:int = myGroup.numElements;
for (var i:int = 0; i < n; i++)
     lbl = myGroup.getElementAt(i) as Label;
     if (lbl && lbl.id == "myLabel")
          lbl.text = "newText";

How do I copy a list from one site to another that has a column that appends changes to existing text?

I want to move a list from one SharePoint site to another, within the same collection. I have created a template and included the content but the column that is selected to append changes to existing text, has not copied in all cases, although it has for
some items.
I have a limited knowledge so won't be able to implement any solutions that require the use of code.

Hi,
According to your post, my understanding is that you wanted to copy a list from one site to another that has a column that appends changes to existing text.
I recommend to use the custom workflow activity Copy List Item Extended Activityto
copy list items and files cross site.
You can do this with codeless SharePoint Designer workflows as long as you can install the
Codeplex Custom SharePoint Designer Workflow Activities.
These activities are also built-in to SPD2010.
To install the custom activities, please follow the steps as below:
Download the solution file form
Useful Sharepoint Designer Custom Workflow Activities
Copy the wps file to the Disk C.
Open the SharePoint 2010 Management Shell.
Run the command: add spsolution c:\ dp.sharepoint.workflow.wsp
Open the Center Administration, click System Setting->Manage Farm Solution-> dp.sharepoint.workflow.wsp->Deploy to one or more Web Application.
Open the SharePoint designer, add action from Custom Actions.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Change of variable text in BEx selection screen

Hi all,
in our BW system the key users are allowed to create queries and also create variables. In some cases, especially for often used info objects like 0DATE the number of variables is increasing very quickly. The reason for this is, that 0DATE is used for a big variety of meanings e.g. delivery date, order date, invoice date etc.
So the users always create new variables only to have a meaningful description in the BEx selection screen, because they do not want only "date" to be displayed here. As result we have many different varianbles with exactly the same technical settings with only different names.
So my question is: Is it possible to change the diplayed text in the selection screen for each query without having to create a new variable?
Thanek you and best regards

Hi Stephan,
Changing the diplayed text in the selection screen for each query is not possible.You have to create a new variable for each query.
Rgds,
Murali

IN OBIEE How to change Writeback input text field into textarea?

HI,
I've got writeback working, OBIEE 10.1.3.3, but I want a 255 character in that writeback text field with word wrapping. because we Can't see to get input
type text to wrap, is it possible to change input type="text" to input type="textarea" for a writeback column?
I tried to included Html with javascript code in Writeback column properties under CSS custom option.it's also not working
HTML code:
<html>
<head>
<SCRIPT LANGUAGE="JAVASCRIPT">
function expandTextArea(textarealabel,e)
if((textarealabel.textLength %45==0)&(textarealabel.textLength>1))
if(e.which==8)textarealabel.rows=textarealabel.rows-1;elsetextarealabel.rows=textarealabel.rows+1;
</SCRIPT>
</head>
<body>
<FORM NAME="Workbook2" ACTION=" " METHOD="">
<TEXTAREA ID ="Text1" COLS="20" ROWS="2" style="overflow:visible" ONKEYDOWN="expandTextArea this,event);">
</TEXTAREA>
</FORM>
</body>
<f/html>
If you have any idea share with me ASAP.
Edited by: devarasu on Feb 23, 2011 6:57 PM

Hi thanks for your quick response,
1) i have cheked you link there is no word Wrapping output, I want to view my writeback filed morethan one line ,is there any way to set instead Horizondal and vertical bar in that writeback filed. like Auto extending TestArea (it have Scrolling bar).
2) Onemore thing also required,once i gave maximum length of WriteBack field 255 characters. but is not controlling it's allowing morethan 255 characters.kindly tell me how to control the lenth of the writeback field .
Note: I am using SQL server DB,in DB and BI Answres writeback column properties i given 255 characters only but it's allowing morethan 255 characters.
once again thanks to you.kindly help me on this ASAP.
Thanks and Regards,
Devarasu.R

To change the header text of Purchase order using BAPI

Hi,
I am using BAPI_PO_CHANGE to change the header text of PO. But it s not reflecting. Can anyone help me by providing solution for this.
<i><b>Points will be rewarded for the useful answers.</b></i>

Hi,
I need to change the text using this BAPI alone. I am using this because i need to change many parameters of PO.
Can u please say me solution using BAPI_PO_CHANGE. I need to know what are all the parameters need to be passed to BAPI to change the text.
Thank you for replying.

User exit/BADi to change the header text in MIRO transaction

Hi all,
I am searching user exit or badi to change the header text in MIRO transaction.
My requirement is, before post the invoice I need to populate the vendor name in Header text field(MIRO -> Details tab -> header text field ). I have tried all the user exits and BADi's related to MIRO. Doesn't work. If anybody knows please share.
Thanks,
Pranav

Try BADI INVOICE_UPDATE.
If you are in system version is ECC 6.0, you can find out a Enhancement SPOT (ES_SAPLMRMC) under Function module MRM_FINAL_CHECK, which can be used to perform this requirement
Hope this helps.
Thanks,
Balaji
Edited by: Balaji Ganapathiraman on Mar 14, 2008 4:43 PM

Is it possible to do a GLOBAL color change for both text and graphics in ACrobat XI?

I used to do this using the Pitstop Pro plugin but now Pitstop is almost $900 and this is the only thing that I would use it for, not worth the investment
I can change text color by selecting individual text items, but I want to change all of the red text into white text
I also need to change all of the red graphics into white graphics and I can't figure out how to do that either
I have a trial version of XI on a Mac and will buy it if it can do what I am trying to do, i.e. global color changes to both text and graphics
thanks!!

I have version 6, but it is way out of date, doesn't work on my current system, I downloaded a trial version of the new one, version 12 I think, now I have to decide if I can afford to buy it, it is not cheap!
oops, sorry, I didn't read your entire message, aargh!
I'll check with them if I can upgrade from this early version, thanks for the suggestion!
(edited because I didn't read properly!)

E-mail changes to unreadable text when moved to another mailbox folder

Hi,
when moving a correct received e-mail to another mailbox folder, the mail and the attachment will change to unreadable text and it looks like the column below.
On my iPad and iPhone the mail and the attachment is shown correct. If I forward it to my own account again, the mail is also correct shown an my imac27, as long as it resides in the in-box.
On the other hand, there are lots of mails+attachments with "normal" behavier when moved.
Any idea about that?
mackliko
------=_NextPart_000_0001_01CCF256.3C7DD310
Content-Type: multipart/alternative;
          boundary="----=_NextPart_001_0002_01CCF256.3C7DD310"
------=_NextPart_001_0002_01CCF256.3C7DD310
Content-Type: text/plain;
          charset="us-ascii"
Content-Transfer-Encoding: 7bit
------=_NextPart_001_0002_01CCF256.3C7DD310
Content-Type: text/html;
          charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
xmlns=3D"http://www.w3.org/TR/REC-html40">
<head>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<meta name=3DGenerator content=3D"Microsoft Word 12 (filtered medium)">
<style>

</style>

</head>
<body lang=3DDE-AT link=3Dblue vlink=3Dpurple>
<div class="3DSection1">
<p class="3DMsoNormal">Mfg<o:p></o:p></p>
<p class="3DMsoNormal">Martin lanzinger<o:p></o:p></p>
<p class="3DMsoNormal"><o:p> </o:p></p>
</div>
</body>
</html>
------=_NextPart_001_0002_01CCF256.3C7DD310--
------=_NextPart_000_0001_01CCF256.3C7DD310
Content-Type: application/pdf;
          name="Test.pdf"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
          filename="Test.pdf"

Please run /cleanviews switch to check the result.
(Type "Outlook.exe /cleanviews in Windows search bar and press ENTER.)
Please also create a new Outlook profile to check if the issue still persists. Thanks.
Tony Chen
TechNet Community Support

Change Materail PO text in PR/PO

Similar Messages

Maybe you are looking for