Change Message in Status Bar

Hi,
Anybody know, how can i change the text of a validation message from BO, that appear in the status bar??
It is a validation that make BO, when an edit text is not complete in the ItemPress Event.
Thanks!!

Hi,
you set a message with this ...
... c# snippet:
SBO_Application.StatusBar.SetText("YourText", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error);
place this in your event and you get a statusbar message.
lg David

Similar Messages

ALV Report - Field Overflow message in status Bar

Hi
I am trying to display ALV report , ALV report is displaying fine but on execution of report , an message in status bar is coming as "Field copy Number can not be totalled because of field overflow."
Can anyone tell why such messgae is comming?
Thanks,
Debadatta

Just a wild guess, treat the below as an example.
Eg:
assuming one field in the output is of length 2 type i.
values: 20, 30, 60, 45.
Totalling the values result as 155. but due to the length of the field as 2. We can encounter the overflow message.
Considering the above example, manually total the values of your numerical columns and see if any of the column is execeeding the specified length.
Regards
Eswar
Note: Reward if you find the info useful.

FM to display warning message at status bar

Hi,
can any body give me the FM to display the warning message
at status bar.
Thanks in advance

Hi,
To give a warning message , you dont need any function module. You can use the keyword 'MESSAGE' and give the type as 'W'.
Do a F1 on the keyword MESSAGE for further details.
regards,
Advait

Error Message in Status bar

Hi ,
i am getting an error message in pop-up box ,can we show this same error message in status bar..?
Thanks.

Hi shiva ,
data : dtype type c value 'S'.
MESSAGE E053(z4) DISPLAY LIKE dtype.
my code is like that,but still it shows in popup window.
can you check it once...?
Thanks

Display a message in status bar when error in a block based procedure

Hi
I have a block based on procedures.
If I have an exception when I try to insert a record for example, how can I display a user friendly message in the status bar ?
here is my insert procedure :
PROCEDURE emp_insert2(t IN emptab) IS
BEGIN
    FOR i IN t.first..t.last LOOP
    INSERT INTO emp (empno, ename, job, hiredate, sal)
    VALUES(t(i).empno, t(i).ename, t(i).job, t(i).hiredate, t(i).sal);
    END LOOP ;
EXCEPTION
    When DUP_VAL_ON_INDEX then
        Raise_Application_Error( -20002, '^This identifier already exists^' ) ;
END emp_insert2;When I use the ON-FORM trigger and ERROR_CODE and ERROR_TEXT variables, I get an FRM-XXXX message saying :
40735--INSERT-PROCEDURE trigger raised unhandled exception ORA-00001.
I want a message like :
ORA-20002 This identifier already exists

Hello,
ORA-20500: ^This identifier already exists^ ORA-06512: à "SCOTT2.EMP_PKG", ligne 48
I cannot figure out what is the problem described by the second part of the message.
why numeric or value error in this case ? ( ligne 48 corresponds to the raise_applicaion_error instruction )There is no problem with the second part it is just for showing the line number it not the numeric or value error the code for numeric or value error is ORA-06502. See the below link for more information
http://www.techonthenet.com/oracle/errors/ora06512.php
So, now you can display your customized message in status bar using the error code which you defined in RAISE_APPLICATION_ERROR like below...
DECLARE
     errcode VARCHAR2(50) := DBMS_ERROR_CODE;
     errtxt VARCHAR2(1000) := DBMS_ERROR_TEXT;
BEGIN
     IF vErrCode='-20500' THEN
        MESSAGE('Here display your customized message.');
     ELSE
        -- Handle the rest errors...
     END IF;
END; -Ammad

How to pass message in Status Bar

How can I pass message in status bar.
I typed bellow line but get some error.
void itemFileOpen_actionPerformed (ActionEvent e) {
statusBar.setText(" need Help ");
Error: (456) method setText(java.lang.String) not found in class oracle.dacf.control.swing.StatusBarControl.
Warning: Deprecated APIs are used. Please recompile with the 'deprecation' option for details.
null

Sergio,
Even though your form is based on the Apps Template form, double-check to ensure it has all of the triggers it should have, like the Form level Key-Commit. The easiest way to make this comparison would be to open your custom form and then open one of the EBS forms like "ARXCUDCI". If your comparison shows no significant differences you might be dealing with a situation when the message is displaying in the Console (status bar) but something else is clearing the console. Check for any Clear_Message calls.
Hope this helps.
Craig...
If my response or the response of another was helpful, please mark it accordingly

Supress message in status bar when using Call Transaction

Hi,
I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
As this was a Flowrack storage type we will assign Source HU during TO confirmation. So I went for a BDC.
But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
Please let me know for more information.
Thanks,
Manoj.

>
kaka79 wrote:
> I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
> But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
> I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
The CTU (CALL TRANSACTION ... USING ...) captures and stores all the messages into the message internal table (... MESSAGES INTO itab ...), but they are not displayed. So, if one of them appears in the status bar, it's because there is an additional MESSAGE ... statement in the program using the CTU. So look at it and add a condition before the MESSAGE statement to not output this exact message (click the message on status bar to get the message number, or debug the program to get it from the message internal table).

SAP GUI 7.20 and Animated Messages in Status Bar

Hello Experts,
Is there a way to disable "animated" display of messages in status bar when Signature Design is active? Currently messages are scrolled from left to right and then fade in. (Please note that this is a different from "Animated Focus" or "Animation" feature and only unique to Signature Design Theme). It would be nice to disable the animation so messages are immediately displayed without disabling Signature Design. I have asked this question in the past and there was basically no way to accomplish this. Is there any hope that this would be included in future patches for SAP GUI 7.20?
Thank you!
Abdul

Daniel,
Have you had any luck with this issue? We recently installed SAP GUI 7.20 patch 2 and are having similar issues. While working in t-code SWDD, "Workflow Builder", I am automatically logged out of SAP and the LOGON pad also closes out and I forced to sign back in. This is happening when I drag and drop an event into a step and enter in information that should normally prompt a warning/error message after hitting the "Enter" key.
Thanks in advance.
Edited by: Michael Kostek on Oct 7, 2010 9:11 AM

Regarding message in status bar

Hai SDN members , i have to display message in status bar , my requirement is like this ,ihave three fields in gui screen 1 is shipment num ,2 is shipment type and 3 is packing ref . and if i give the input in this three fields ,then the shipment number should be displayed in status bar

hi,
u want message after pressing some button or enter?
u need to write this in USER_AOMMAND module of PAI, in when case..
like
when 'SAVE'.
MESSAGE s000(zmsg_fmtr) WITH srn.
here zmsg_fmtr is my message class
and this is my 000 message in that mssage class
Record Saved Successfully with Serial Number &
in place of & my passing parameter (srn) will come on status
reward if usefull...

Warning Message in status bar

Hi all,
I have an enhancement in which i need to pass a custom warning message through badi ' INVOICE_UPDATE ' in the status bar for TCode MIRO, i am able to display the message with a popup screen but i am unable to display it into status bar.
How can i display that warning message in the status bar ?
can we pass the custom warning message through a BADI into the status bar ?
Thanks & Regards,
Pooja Joshi

if your system settings are normal system warning message will always come in the status bar only
any way click on customizing of local layout icon in standrad tool bar (in any screen),
goto options
inthat see the options tab, in that ,if check box wiht 'dialogue box with warning message' is checked ,
un check the check box,
click on OK
now execute your code normally and see

Weird message below status bar - icons move down and almost touch dock

Ever since installing 3.0 on my 3g iphone I've had a weird problem. Roughly around an hour or so after the phone is on, the icons on the page move down (about an 1/8 of an inch) and the words "Revisar ADN" appear below the status bar. A little bit later the message will go away but the icons will remain shifted down. The only way to fix it is to turn the phone off and back on again, but again, roughly an hour later it happens again.
I have restored several times but to no avail.
Some more info about the situation: I purchased and activated the phone in Guatemala (where I live) and my carrier is Claro. The words "revisar ADN" mean "check DNA" in english. The phone is not jailbroken or anything like that. Even though the carrier is Claro, the international settings are in English with the exception of the spanish language added to the keyboard. I've had the phone for about 6 months and on 2.2.1 never got this message.
Any help would be appreciated.

Thanks so much for the information and the investigation on this (I saw you posting in other forums as well). Through some trial and error I think things are working finally. Here is the story for anyone else that might suffer from the same problem.
I originally tried the SIM trick and took the SIM out, put it into another phone, added a contact, and then put the SIM back in. This unfortunately did not work. A few hours later the icons had moved again. I then noticed that the contact that I had added to the SIM was not in my iphone address book, so I imported the contacts from the SIM (Settings>Mail, Contact, Calendars>Import Sim Contact), hoping that this would fix the problem. That didn't work either. I turned the phone off and on again, and that didn't work either.
Then I began to look into the "Claro Contactos" issue, and went looking for the SIM Applications (Settings>Phone). Now, I am almost positive that when I looked here earlier that day the SIM Applications button was not there. Maybe it was, but I'm thinking that by putting the chip into another phone and then putting it back into the iphone, this "unlocked" this feature. Or maybe it was the simple act of taking it out and putting it back in. Either way it was there now. I had never heard (or turned on) Claro Contactos so I went hunting for where to turn it off. After finding it "Utilidades Claro" it popped up a message asking if I wanted to turn it on. Obviously I had not used the feature before so I couldn't turn it off like the previous post had suggested. So I did the opposite and turned it on. I then touched the button "Respaldo Contactos" to back up that one contact to this service and then touched the button "Respaldo Automatico" and told it NOT to back up automatically. After doing all of this, I turned the phone off and on again, and now everything has been fine. It's been a full day and my icons are right where they should be.
I mention the process because I'm not totally convinced that just by turning the Claro Contactos on was the issue. I think the whole process is the solution. Maybe someone else that has the same issue can try the process, but backwards and see if just switching the Claro Contactos on (or off) solves the problem.
Thanks for the help and I hope this helps whoever else might have the same problem.

How to increase the length of message in status bar

Hi all,
I need to show an error message in the status bar of the ABAP editor when an error occurs in the program. But the error message is not fully getting displayed, it is getting truncated. Is there any way to increase the length of the message in the status bar.

You can display upto 73 charcters ,if you need more than this then create one text element .
here you can have 132 charcters.
parameters p_matnr like mara-matnr.
start-of-selection.
message s999(z01) with text-005.
Create message class with & & & & & & ( Message short text ).
This way you can show maximum 132 charcters.
Thanks
Seshu

Tracing of message in Status Bar using Call Transaction for MRBR

Hi
As per the business requirement, I would like to automate the MRBR Transaction. I am achieving this by using Call Transaction. After aaplying certain company codes as an i/p; i receive the invoices as an o/p in a ALV Lay out. Say for example, 100 invoices are displayed in a AlV Lay-out after applying i/p. Now I select all these 100 invoices and release them.
All these steps are recorded and supplied to Call Transaction via BDC table.
Problem:
The number of invoices released, appear in the status bar of that ALV Lay-out screen. This message appears on the ALV screen after I have released the invoices and clicked on "SAVE" button.I would like to use this information and display this number (No. of Invoices released) in my Job Log. But I do not know how to do it. Could any one help me out for this?
Thanks in advance,
Jigar Shah.

Yes I have tried that option as well.
But the thing is, the recording gets over as soon as I click on "SAVE" button.And that message apperas in status bar only after I click on "SAVE" button.So this way the message in the status bar never gets recorded.
Thanks & Regards,
Jigar Shah.

How to display a message on status bar while an LOV is active?

Hi,
Can any suggest me that how can I display my custom message on the status bar of my form, while an LOV is displayed on the screen.
I populate an LOV in an Item in the form. I need my status bar to display a message while my LOV is Displayed and also this message to be there on the screen when we moves between the records on the LOV.
This can be partially achieved by 'message' built-in, but the text message so displayed disappears as soon as u move between the records displayed by the LOV.I want this to be retain there even when we move between records(the data displayed in the LOV) in LOV.
Can anyone suggest the solution?
Many thanks in advance.
Cheers
Naresh

hi i am not sure about displaying the information on status bar , what i feel is u can do something like this.
take one display item which shud be non database item and u can assign the message u want to display to this display item when ever u navigate thro' records.
i hope this can solve ur problem
thanks and regards
chaitali

Messages on status bar

Hi friends,
Thanks in advance.
Can we hide or suppress the messages displayed on the status bar .

Hi,
For BDC
R u using call transaction for ur BDC? If u r then u can catch all your messages and put them into an internal table of type bdcmsgcoll. Use the addition ... MESSAGES INTO itab with your CALL TRANSACTION statement.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

Change Message in Status Bar

Similar Messages

Maybe you are looking for