Change Message Reporter in SolMan 7.1 Incident Management CRM WebUI

Hi,
i want to create a new Incident via the CRM WebUI (Role: Solmanpro). When I want to choose the message reporter i do not recieve all business partners via the search dialog. Only BP without the role employee are listed.
The search dialogue also says that you can only search for contacts and not for business partners. If a customer is entered in the field customer the search dialogue is prefilled with the bp numer of that customer.
How can I deactivate this function so that i can choose every BP as message reporter via the search dialogue?
Thank you in advance!!
kind Regards
Sebastian

BP Role contact person needs to be maintained!

Similar Messages

Update Business Partner Master Data for Incident Management

Hi fellow SAP-ians,
I have two questions that I need to ask in relation to Incident Management SOLMAN 7.1:
1) Can Business Partner (BP) master data be mass updated via a catt script? (recording of transaction BP)
2) What BP roles can I use if i need to capture profit center, cost center and department info for each BP and to be able to display those info from Incident Management (CRM Web UI)?
Thanks in advance. Your swift response is highly appreciated.
B.Regards,
Khairul

Hi Vikram,
I appreciate your quick response. I went over the document that you've mentioned. However, nothing in there seemed to help.
Just FYI, i need to create/change approx. 25,000 Business Partners in SOLMAN 7.1 by 1)creating system users in SOLMAN and 2) execute report AI_SDK_USER_BP_GEN to generate/update BP IDs accordingly.
My question was, lets say if i needed to enter profit center, cost center and division info into each BP. In what BP role and fields, besides the standard BUP001 (Contact Person) & BUP003 (Employee), that I can use to enter those type of information?
For example, profit center - 88KUL186; cost center - 88KUL186; division - KLIA.
Thanks in advance.

Incident Management sending EMAIL problem

Dear Solman Gurus,
We are using Sap Solman 7.1 incident management,
As screen shot maintained below. When i try to open a message there 3 options to use incident system. When i choose "Incident(VAR)(SMIV)" and "Support Message(SLFN)" not send automatic EMAIL.
But when i choose "Incident(VAR) V (ZMIV)" it sends EMAIL related to ticket owners. How can i activate sending EMAIL features for others ?
I need your help
Regards

Hello Kemal,
SAP suggest to use new transaction types sucha as SMIN or SMIV
1567003 - FAQ: ST710 Incident Management Frequently Asked Questions
SAP recommends that you transition from your old transaction types (based on transaction type SLFN) to the new ones.
Please check if configurationg is maintained according to blog
Sending E-Mail from Support Message
BR,
K.

Confirm button disabled for Reporter in Solman 7.1 SP10, Incident managment

Hello,
we are using CRM_UI for Incident managment. When the ticket is in status "Proposed Solution" , Reporter is not able to confirm the ticket, "Confirm" button is disabled. How to enable this button?
Renato

Hello Renato,
Please check authoraziton object b_userstat mentioned at belowed thread:
Reporter not able to confirm the Incident in SolMan 7.1 SP6
BR,
K.

Is it possible to copy message in solman workcenter (Incident Management)?

Dear all
Is it possible to copy message in solman workcenter (Incident Management)?
For example, we created a Support Notification (SLFN) message as follows;
【ID】                                80007000
【Priority:Text】               3:Medium
【Description】               Test001
【User Status】               In process
【Attributes】                   SM1_200
【Business Partner】    ABC                    etc...
And now we want to copy the above message.
(Say, ID would be 800070001 and all the other section is completely same as ID80007000)
Does anyone know that it is possible or not?
Yours,

Hi,
I am not sure how good this will work or not; but you can give a try using the copying control mechanism. This should be able to copy the message completely to a new message when u create a new one from the existing one. Please refer the following IMG to find how to do this:
Customer Relationship ManagementTransactionsBasic Settings--Copying control for Business Transactions.
Rajeev.

Who change message of reports in portal?

I need change message in reports of portal, I execute reports,when no exist in table show the following message: No row returned. By I want show message:The document no exist. Who i can make this?

Hi there,
Metalink Note:183131.1 - How to Customize the Message "No Row Returned" from a Report should answer your request. It is just to add some PLSQL custom code...
I hope it helps...
Cheers,
Pedro.

Reporter & Customer field empty in solman 7.1 incident created by crmwebui directly issue

Hi All,
We are running SAP SM 7.1 SPS04. Incident Management (CRMWebui based) is setup. Everything works well (e.g. Reporter/Customer fields gets filled automatically) if incident is created from satellite system or from solution manager workcenter. However , If incident is directly created from CRMWebui screen i.e. Create>Incident .....fields 'Reporter' and 'Customer' are blank and not getting determined automatically.
Is this an issue or some other adjustment (other than mantaining sold-to-party in IB52>Goto>Partner or adding BP to contact relationship) which needs to be done.
Please share your thoughts o this if any !!!
Thanks & Regards,
Rupesh

Hi All,
To update on this i realized while creating an incident in CRMWebui screen directly.. if ibase field value is assigned then 'Customer' field gets determined automatically (based on ib52>Partner> sold-to-party). Thus, succeeded in auto 'Customer' field determination.
However, issue of not getting 'Reporter' is till there.
Thanks & Regards,
Rupesh

Incident Management Reporting Setup

Hello!
I try to setup the incident management reporting.
I can't find any help or guide for this process (only http://help.sap.com/saphelp_nw70/helpdata//EN/51/7dd0c003414e80a6847f5c7437ea63/frameset.htm). Is there something else?
In webdynpro "Incident Management Reporting Setup" I have to configure the RFCs (you can open it with SOL work center --> Incident Management --> Reports --> Message Reporting --> Setup)).
The first field is called "RFC from Solution Manager to BW System", contains NONE and I can't change it.
The second field is called "RFC from BW System to Solution Manager". Here I created an RFC entry, but now I can't change it too. Is there a trick to edit this fields once again?
Thankx and regards,
Ralph

Hi,
Would this be helpful ?
Please follow the path below which provides details on the setup of
incident management in EHP1.
https://websmp110.sap-ag.de/okp
- SAP Solution Manager 7.0 - EHP1 (free of charge) <In left tree>
- opeeration with SAP solution manager
- Monitoring of Mission-critical Processes: Incident Management
- Incident Management - Initial Configuration
Hope this helps,
Cheers
SH

"Reports" field in Incident Management workcenter

Hello All,
I have a silly question. Ther eis a Reports Tab in Incident management workcenter.
In overview tab, I can see there are 10 msg in confirmed status and 3 in proposed sol,etc..
But when I open the Reports Tab, I can see under" Messages for processing " it shows graph only for Confirmed.
Any idea about this ? Any Solution ?
Regards,
Shyam.

Hi Shyam,
yes you are right I did not get your question clearly. Now it is better.
I tried it on my own. First I was not the processor of any message, just my team processed some messages. Result:
In the overview tab I saw all the messages my team is processing and my created messages. In the reports tab I see no message for processing on the left and my created messages on the right.
Afterwards I took one message in processing. Result:
In the overview tab I saw all the messages my team is processing, one message I have to process myself (displayed in a separate column) and my created messages. In the reports tab I now see exactly this one message for processing on the left and my created messages on the right.
So as my conclusion, in the reports tab you must see all the messages you process yourself, but not by your team. Try it on your own, if you have the same outcome.
BR André

Talent Management - Change of Reporting Manager

Hi all,
I have changed the reporting manager relationship in SPRO: Talent Management and Development>Basic Settings>Specify Type of Reporting for Determining the Manager from INDIRECT to DIRECT (to A002 relationship).
However, after the changes I am unable to view the manager's name under the talent profile header and also those employees with A/B 002 relationship in MSS talent assessment.
Before the changes (with INDIRECT relationship), I was able to view the the manager in the talent profile header and employees under the manager.
Are there any other configurations needed besides the above is needed for me to view the A002 manager and the relevant employees under him.
Thanks in advance.

Hi Eric,
This is the only setting that you need to enable if you use S A 002 S relationships. I'm not sure why you don't see the correct reports and managers, so it could be down to an evaluation path (as suggested above) or it could be a bug. I would suggest raising and OSS message for some clarification.
If you do that please post the solution you get from SAP here, since it will be useful for other users of the forum.
Best regards,
Luke

Change existence report LDB PNP to PNPCE

Hi HR experts !!!
We want to convert all the existence reports which are using <b>PNP</b> to <b>PNPCE</b>? Do you guys have idea how much time itll take? As we have around 1000 reports.
I need your input guys
Cheers
Usman

Usman,
I am also on HR project . Were also discussing the same thing !! but it looks like it need another project to change the LDB to PNPCE as reason being lots of reports are written using PNP logic in mind.
But PNPCE Behaves different . Well I must say its another project to change 1000 reports
FYI...
It is better to go in for PNPCE even if you do not have Concurrent Employment to take advantage of the new lDB. The one thing PNPCE does do is when the GET executes only the infotype records retrieved for the interval requested will be retrieved. Whereas PNP by default, will retrieve all infotype records for a given PERNR.
SAP recommends to use PNPCE for all new development. But all the features are not available as of now. The Time Management functions for concurrent employment have not been released for all customers. They are activated for selected pilot customers only. Can get some info in SAP Note : 518520 , 516489..
OSS Note # 561645 ( LDB PNPCE: compatibility with PNP )
Symptom
In some respects, logical database PNPCE responds differently from logical database PNP. This may cause errors in applications that do not know this difference.
Other terms
PNP, PNPCE, payroll period, PNPTIMR9, PNPTIMRA, error message, information message
Reason and Prerequisites
There are the following differences between logical databases PNP and PNPCE:
Unlike PNP, logical database PNPCE does not have two radio buttons you can use to set the payroll period (parameters PNPTIMR9 and PNPTIMRA). Instead, the payroll period is set via parameter PNPTIMED (displayed as a dropdown box on the selection screen). This difference must be taken into account when you call a PNPCE report from another program. Otherwise, in incorrect system response occurs in the PNPCE report called. Problems may also occur if you convert an existing PNP report to PNPCE and want to use an old (PNP) variant.
If you enter an invalid payroll arear or an invalid payroll period, PNP issues an error message whereas PNPCE only issues an information message. This causes problems if you run a PNPCE report in the background because in this case the program runs into an endless loop instead of terminating.
Solution
Implement the attached corrections or import the corresponding support package.
This changes PNPCE in such a way that it responds like PNP
Moreover, also look at OSS
PNPCE: Performance improvement ( OSS note # 687004)
Symptom
You use a report that is based on logical database PNPCE. Either the performance of the report is poor, or the program terminates due to a memory overflow.
Other terms
Performance, PNPCE, 0000, 0001, buffer, memory space, memory space consumption, partitioning, FILL_0000_0001_BUFFER, T77S0, LDB, PCEPS, PNP mode
Reason and Prerequisites
The PNPCE can be used in a PNP-compatible mode. The mode is 'PNP-compatible' if the report does not program on events GET PERSON and GET GROUP and does not use the 'AS PERSON TABLE' extension for the INFOTYPES statements (for more details refer to the documentation of logical database PNPCE in Transaction SE36).
In this mode the performance is worse, as if logical database PNP is used. After the implementation of the correction from this note, the performance is significantly improved.
Another problem is that all personnel numbers that meet the entered selection criteria are internally selected during the execution of the report. Then the system imports all data records of infotypes 0000 and 0001 for all these personnel numbers because they are needed for the internal processing for different reasons. If the amount of personnel numbers or the amount of data records per personnel number is very large, memory problems can occur. The attached correction solves the memory problems.
Solution
Implement the correction according to the correction instructions or import the corresponding Support Package. If you implement the correction manually, you first have to implement Note 705870.
A part of the correction causes the internal processing of the persons/personnel numbers in blocks. If logical database PNPCE runs in PNP mode, the block-by-block processing is executed based on personnel numbers. Otherwise (in CE mode) it is executed based on persons. In PNP mode, logical database PNPCE behaves exactly like logical database PNP concerning the block processing. The settings are also made along the lines of logical database PNP. For a more detailed description refer to Note 705870.
Standard setting of the block size
In CE mode the block size is set to 10,000 persons by default. That is, as long as the number of selected persons does not exceed this value, no block processing is executed at all. A memory space analyses showed that this does not cause problems with the memory space in a system with an average number of infotype 0000 and infotype 0001 data records. However, if the amount of data records (= splits) is very large in your system, you have to reduce the maximum block size manually.
Manual setting of the block size
There are two different options to set the block size manually: a) report-specific by means of a switch which you have to set in the source code of the report, and b) cross-system by means of a switch in switch table T77S0.
The report-specific switch is called PNP_MAX_PARTITION_SIZE. It has priority (if switch T77S0 is activated) and must be set in the source code of the report at event START-OF-SELECTION at the latest.
Example: Set the maximum block size (number of persons that can be processed together) to 250:
START-OF-SELECTION.
PNP_MAX_PARTITION_SIZE = 250.
The switch is recommended for customer-specific reports requiring a lot of memory and therefore need to minimize the additional memory space of logical database PNPCE. It is not suited for SAP standard reports because the report would have to be modified in that case.
The cross-system switch is maintained in table T77S0. It affects all reports that are based on logical database PNPCE and do not use the report-specific switch PNP_MAX_PARTITION_SIZE.
The switch belongs to the LDB group and is called PCEPS. The switch is maintained in Transaction SM30 (enter table 'T77S0' and choose 'Maintain'). The switch is delivered (for Release 4.70 in a Support Package) with initial value (0). An initial value causes the switch to be ignored and the standard setting to be used instead. If you want to set the switch, set it to a numeric value. This value specifies the maximum number of persons that are processed together in a block.
Example:
LDB PCEPS 250
For more information on the procedure of a system upgrade refer to Note 317722
Thanks
Saquib
Message was edited by: Saquib Khan

Incident management and Critical Master data table change management.

Dears,
I need to configure Incident management and Critical Master data table change management on our solman 7.0 server.
I want to know how many days should be required for this activity and please share documents.
Shivam

Hi,
I faced a similar situation,
I tried all the possible ways like activating InfoObject manually, Through an activation program of aggregates,
Also ran RSRV check which was showing no negative results.
I raised an OSS note for the same but after that when SAP returned back the process chian ran again as it is a daily load which activated the record in 'M'.
I ask you to wait till the next process chian run, and try all possible ways to activate.
If it is not corrected then raise an oss to SAP.
Thanks & Regards,
Vishnu

Got "HTTP - 404" error when apply change of report attributes

Environment:
Oracle 10g (not XE)
APEX 3.1.2.00.02
Oracle HTTP Server
I tried to modify a page in "101 - Sample Application", changed the report attributes (changed the heading type from Column Names to Customer), and when I applied the change, I got a "HTTP - 404 Page not found" error.
In error log file of Apach, the error message is "mod_plsql: /pls/apex/wwv_flow.accept HTTP-404 ORA-25402......"
Anyone can help me? Thanks.

Please tell us your first name and update your profile with it to help us. Thanks.
changed the report attributes (changed the heading type from Column Names to Customer)I don't follow that.
Can you install this application into your workspace on apex.oracle.com (request one if necessary) and reproduce this problem there?
Scott

Hands free problem and message reports???

Hello guys,i want fisrt to thank you for your suppost the last time i had problem with my blackberry 8900 smartphone.The problem i'm facing now is that when i put on my handsfree i can't hear the sound of the incoming call or message if i don't have them on...and especially when i'm driving i can't have them in my ears all the time and as a result i miss a lot of calls...what can i do about that?is there a setting i can change?Also,i wnt to ask you if there is a setting in order to get message reports??
thanx again guys...

What hands free device?
What model phone do you have?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Change the Report Title for XML Publisher, depending on the field value.

I want to change the Report Title as below.
if the field_A='B' then the report title as it is defined in report defination
else the report title is 'XXX"
Please let me know whether it is possible, if yes please guide me. how can we do it.
Thanks
Venkat

Tim covered the inline if statement, though not specifically regarding a title, in his blog recently:
http://blogs.oracle.com/xmlpublisher/2007/12/18#a723
The syntax is:
xdoxslt:ifelse(.//WM_FLAG='C’,'Canceled','Approved')

Change Message Reporter in SolMan 7.1 Incident Management CRM WebUI

Similar Messages

Maybe you are looking for