Change mode to 100/0.25 - SICK LMS-2xx driver

Hi all:
I am using the NI driver for the Sick LMS 291 model (Sick Lms-2xx NI driver), The issue is that I cannot receive any data when setting LMS mode to 100/0.25(180/0.5 works fine for me),
Any suggestions?

Hi,
It's not easy to say where the problem is just with this information. Maybe you could dig into the code and use bebugging methods (highlight, breakpoint, etc.) to see where the problem really is

Similar Messages

Changing native VLAN 100 on SFE2000P to VLAN 1?

The "SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide" says on page 124 "The Management VLAN is set to VLAN 100 by default, but can be modified." (highlighting is mine).   I'm still searching for how. Anyone know the trick? I always end up blocking myself out of the switch and having to reset it.
My basic problem is trying to connect two SRW224P's with one SFE2000P (in Layer 3 mode).   They need to have the same default or native VLAN for the trunking to work properly.   The SFE2000P has VLAN 100 as default, while the SRW 224P has VLAN 1 as default.
The documentation says I should be able to change it, but never says how.   I haven't found any way to change the VLAN 1 on the SRW224P's to VLAN 100....but I would be willing to that as well. I have attachment to VLAN 1 or VLAN 100....I just want them to be the same.
Thanks....gerry

Correct. As soon as you change it to 100, you will lose access to the devices since vlan 1 is used for management. To shorten the down time, you can create vlan 100 and all the SVIs on all switches ahead of time and than change it form 1 to 100 in a maintenance window.
HTH

Change mode of the excise invoice is showing zero excise values

H ifriends,
The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
Thanks
Sasi

s

Restrictions in change mode

Hello experts!
I have to modify an Z report. When I switch to change mode, appears the text in gray, and the edit, replace insert buttons, the same buttons when you try to edit an standard program.
But in program atributes, the editor lock is uncheched !!! This is amazing. This program is a copy of an standard program.
Pls help me to edit this program in the ordinary way, because I need to do a lot changes.
Thanks in advance
Pablo

Hi,
You can switch off modification assistance.
menubar - edit - Modifications operations - Switch off Assistance.
thnx,
Ags.

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Excise invoice number showing display option in J1IEX change mode.

Hi CIN Experts,
We are using E.C.C6.0.
In Excise transaction T.code: J1IEX Change option, Official Excise invoice number (J_1IEXHEAD-EXNUM) showing the display mode. How can change the Official Excise Document Number is display mode to change mode in T.code: J1IEX change option.
In 4.7E system showing the change option in T.code: J1IEX change mode.
Regards,
Hanuman

We cannot change this field from display to change. Once the excise invoice is captured the excise invoice number is freezed.
It is SAP Standard & to break this you would need the access key from SAP.
If the change in excise invoice number is by user mistake, please cancel the excise invocie and capture the new one.
Thanks & regards
Hameed Parvez

P.O Error in Process after copying the existing item in change mode

Hi All,
We are in SRM 5.0 Server 550 and SP15 and are using Extended Classic Scenario.
We are facing a peculiar issue, when an already created P.O (Free text - goods) is changed and a new line item is added either manually or by copying the existing line item and then ordering it, the P.O is going into Error in Process status.
This is happening only when i am adding a new item (material) to the existing line item (material) but when i am adding a service line item in the change mode to the existing material line item, the P.O is getting ordered without any issue.
I believe this is SAP bug and raised with SAP for OSS.
Meanwhile i would be grateful if you can provide any resolution to this issue and provide any OSS note number (If one already exists).
Regards,
Teja

Hi Teja
it works fine for me.
old po template..
taken describe procureemnt - goods
copy the line item
changed qty and price
POs created for both items in one PO since vendors are same?
what the error message says in the application monitor or rz20 / monitor sc.?
for me i had a contract in my pld pos.(sc).
muthu

How to - only display the price of approved PO (not change mode)

Hi,
Following are our PO release strategy
1. Release id : P has
a. Released indicator (tick)
b. Changeablity - 4
The above setup is working fine, means still after the approval users can change all the fields. New strategy is triggered once the values are changed.
Now the issue is business owner does not want the price, qty in change mode after approval. After approval ME22N to show
1. Price & qty to be in display mode
2. All other fields (except the one which affects PRICE) in change mode.
I tried to all the combinations, but after approval I get to see either all the fields in display mode or all in change mode.
Is it possible to display the price related fields only for the approved PO in ME22N.
Please advice
Thanks,
Raj.

Hi Mani,
Thanks for the fast reply.
1. There is no ME22N - Fsel Key available.
2. Only for the approved PO - we want the price fields in display mode.
3. There is no restriction required for the un approved POs.
Is there any way.
Please reply
Thanks
Raj.

How to find out what users have an order open in change mode

Is there a table I can easily query to determine which user has a specific order (VBAK) open in change mode?
Will give points of course.

HI,
Use this function module. This will return you the list
CALL FUNCTION 'ENQUEUE_READ'
                EXPORTING GCLIENT = GCLIENT
                          GUNAME = GUNAME
                          GNAME   = GNAME
                          GARG    = GARG
                IMPORTING SUBRC   = SUBRC
                TABLES    ENQ     = ENQ
Thank
Mahesh

Condition Type appear twice in PO Header in Change mode

Hi Gurus,
I have done the following steps:
1. I have created an import PO and added few Freight Conditions in the header, and Customs Condition in Line item
2. I have booked a customs invoice against the PO. (MIRO posted for Planned Delivery Costs)
3. Now when I go to the change mode of the PO, then in the header I can see same condition type twice, one with the value maintained earlier and another with value 0.
Issue:
I should not be seeing the condition type twice in header.
Please help me resolve the issue as early as possible.
Thanks in Advance.
Regards,
Ankush

Hi Ankush,
Make sure that header conditions are marked as header only and same for item condirions in m/06
try creating a new PO after making these changes
Reg
Dheeraj

Delivery Output Type not updated automatically in change mode

Hello,
I am dealing with a strange problem.
If i open delivery to change using VL02N then, output type configured for reissue is updated properly and on save ouput type is getting successfully processed also.
Now if i open VL03N and then using change mode button on application toolbar i go to change of delivery, then output type is not getting created. The issue was figured out when i tried to open delivery from shipment and then using change button i tried to change and save delivery....
Expectiing solution from experts.
Thanks
Hari

Hi,
May be this behaviour is due to the application in which you are opening the delivery. When you open the delivery from shipment, check the transaction code in the screen in system status. If it is VL03N, then it is correct. But if it is VT03N, then it is expected that even in change mode, the output is not triggered. Pls check this once.
I tried the same thing in an invoice from where i opened a SO and then went in change mode, and the otuput is getting retriggered.
I hope teh configuration of your output is correct. Ensure that the Multiple Issuing button is ticked on, if you want yoru output type is to be triggered everytime you go in change mode.

How to Grey out the field "tracking number" during change mode in the order

HI Expert,
How to grey out the Tracking number (AFVGD-BEDNR) at Order -> Operation tab -> external tab ->tracking number.
during creation IW31 = not grey out and allow entry.
for change mode IW32 = grey out
if i set grey out at config OIOPD, it will grey out even during creation mode.
Please advise
Thanks
Regards

Hi
I think Using field selection it is not possible to make as display ,kindly check with screen or transaction variant -SHD0
regards
thyagarajan

Change the Sold to Party(SP) in sales order in change mode

Hi,
Is it possible to change the Sold to Party(SP) in sales order in change mode?
If yes then How??
Regards
Somnath

Hi somnath,
It is very much possible to change the sold-to-party in the change mode of Sales order(VA02).
Goto VA02-->enter the sale order number.
Press enter.
In the overview screen if you change the sold-to-party then every thing will be redetermined(Taxes and pricing procedure etc...).These will be determined from CMr etc.
You cannot change the sold-to-party at the partners tab that is present in the Header details.
It will be greyed out.
If you change the sold-to-party at the overview screen as suggested earlier it will not apply to the item.
You are also going to see this message while changing.
And finally save the document.
Regards,
Krishna.

Jump from Sales Order to Purchase Order and back again (all in change mode)

Hi,
Situation is this:
- Sales Order is created with 10 items. 4 items are created with connection to Purchase Order.
- User open Sales Order in change mode
- User goes to item 20 that has a related Purchase Order
- User wants to jump to related Purchase Order and make an update here
- User wants to be able to jump back to Sales Order Item 20 from Purchase Order
When user jumps to Purchase Order in change mode, then this Purchase Order will also block the same Sales Order, that was open. This can be handled with dequeue and enqueue.
Problem is that when Purchase Order is saved it will make an update to the Sales Order in the background. When user jumps back to Sales Order then this Sales Order is still open with old data and these data does not reflect data that can have been updated by the Purchase Order.
Also: When Purchase Order is making updates to the Sales Order then e.g. Message Out Table NAST is automatically updated (insert and delete records). If user then manually updates the Sales Order with old information, then System Dump appears as Sales Order tries to insert NAST records, that have already been inserted or delete NAST records that have already been deleted via the Purchase Order.
This means that when user jumps back from Purchase Order to Sales Order Item 20 then Sales Order needs to be refreshed with new data after Purchase Order has saved the Sales Order.
Are there any solution to do this in a standard way (from within SAPMV45A) ?
I prefer not to reopen Sales Order using syntax like CALL TRANSACTION.

Hi,
Thanks for reply.
In third party PR gets created automatically but PO gets create manually.So changes get refelect in PR only not in PO.
Can you give me the solution for completing this task.
Thanks & Regards
Jalaj garg

Change flag deactivaion for PO output message type during change mode

Hello All,
WE are using automatic message output determination functionality for PO output type. This output type has been configured for creation and change mode under Fine tuning.
Two output type are configured, for example ZAAA is output type for ALE and output type ZBBB for archiving.
Here archiving functionality is used to transfer attachment from ERP system to SUS supplier portal as a pdf file. This is done via enhancement and the attachment transfer is working fine.
During creation mode both the output types are determined and successfully processed and as a result attachment is transferred to supplier portal which is absolutely correct. In the attachment all PO line item can be seen which works well.
Now I change the PO and add a new PO line item, system automatically default both the output type for change mode and upon saving both the output type are successfully processed.
Now here is the problem in change mode only the added PO line item is sent as an attachment to the supplier portal. Here the requirement is see all the PO line items including the once which were newly added.
Solution is if we uncheck the change flag for output type ZBBB during change mode then all the PO line item can be seen under the new attachment with new version.
Please let us know how this functionality can be acheived ... is there an user exit available.
We have a work around where we are running a background job every 3 mins and based on the last successfully processed message for output type ZAAA we are attaching first output type ZBBBfor archiving the changes and then ZAAA for sending the changes along with attachment to Supplier portal.However this solution is a temporary one , we need a concrete solution for this.
Please advise.
Thanks,
Yatin

Hello All,
Thanks for the reply,
But we cannot modify the existing print program as this print program is being used in different countries also.
We already know a solution that during change mode if we remove the change flag from output type ZBBB then all the PO line items along with the recent changes can be seen under the attachment under supplier portal.
The question comes now, how do we automate this processu2026 Is there any standard progam or user exit available.
Manually, if you add a message type ZBBB in ME22N tranasction for creation mode then all PO line item with recent changes get transferred but we need to automate this process for create and change PO transaction.
Thanks,
Yatendra

Change mode to 100/0.25 - SICK LMS-2xx driver

Similar Messages

Maybe you are looking for