Change .mp4 Icon on published files from Adobe Premiere Pro CC 2014

When I export my Adobe Premiere Pro CC 2014 file, to a .mp4, the thumbnail icon of the final file doesn't pick up the first frame. (which is a still shot, title shot). Instead, it picks up the first frame of the first video clip at about 5 seconds in.
How can I set the this to pick up the first frame?
I can upload the file to YouTube, and change the custom thumbnail fine, but when the video is embedded on a page, it pulls the this same icon instead of the desired first frame.
Thanks for helping!
James

I contacted Adobe customer service and they directed me here.
They told me that they would transfer the chat to the appropriate group but ended up giving me this community forums link.

Similar Messages

  • FROM Adobe Premiere Pro CC 2014.2 support TO Adobe Premiere Pro CC ver. 7?

    My friend just sent me a PROJECT FILE from the latest ver of Adobe Premiere Pro CC, which is 2014.2, and I opened it to the old version of Adobe Premiere Pro CC, which is ver. 7. An error message pop up and it said that it cant be open cuz its a newer version. How can I open the project file he sent me to my old version of Adobe Premiere Pro CC?

    I was behind on an update! Never mind LOL!

  • Lesson files in the CD from Adobe Premiere Pro CC 2014 release (Classroom in a book) won't load.

    After copying all files from the CD on to my hard drive, the files won't work when I tried to open it in Premiere Pro. It says file missing or cannot be found.
    Could anyone please help me with this?

    I contacted Adobe customer service and they directed me here.
    They told me that they would transfer the chat to the appropriate group but ended up giving me this community forums link.

  • Adobe Premiere Pro CC 2014.2 Trial Version  - Error when importing mts and mp4 video files

    First time using Adobe Premiere Pro (and I'm using the trial version).  When I try to import an mts video file (and tried to import an mp4 file as well), I get the error: Adobe Premiere Pro CC 2014.2 has stopped working.  And then the program crashes. Please help.
    My computer specs: Windows 7 with Service Pack 1,Processor: Intel(R) Core(TM) i5-4570 CPU @ 3.2GHz, RAM: 4.00 GB, System type: 64-bit

    Hi Catherine,
    Welcome to the Adobe forums.
    Please try the steps mentioned below and check if it works for you.
    1. Launch Premiere Pro and create a Project, go to File menu>Project Settings>Renderer and change the Renderer to Software only mode, delete previews if you get a prompt and then try to import the clip.
    2. If step 1 fails or the Renderer is already on Software only mode, go to Start Menu and search for Device Manager, go into Display Adapters and Right click on the Graphics card to select Update driver software option, on the next screen choose "Browse my computer for driver software", then choose "Let me Pick from a list..." option and from the list select "Standard VGA Graphics adapters. You might need to change the screen resolution of your screen and once done restart the machine again.
    Launch Premiere Pro and import the clip to check.
    Regards,
    Vinay

  • Errors opening a project in Adobe Premiere pro CC 2014 from previous version

    Hello!
    I have a problem with Adobe Premiere Pro CC 2014. I use Adobe to edit my film project and from the last time I updated the CC to CC 2014, it shows me an error message (Pic nr 1). When I want to continue and save that, Premiere CC 2014 shows me another message(Nr 2). but next time when I want to open that, it's impossible ... (Nr 3).
    I didn't change or remove anything. The problem started after I updated the program. Even now that I want to open the project with previous version of CC 2013, its showing me the same errors...
    Do someone have any idea about it?
    Thanks

    Try this:
    Error "This project contained a sequence that could not be opened" 

  • Upgrade from Adobe Premiere Pro 1.5 to the latest version

    I purchased few years ago Adobe Premiere Pro 1.5 and enjoying it since.
    Recently I purchased a new camcorder outputing MP4 and AVCHD video formats which cannot be read by Adobe Premiere Pro 1.5.
    What are my options?
    Is there a path to upgrade from Adobe Premiere Pro 1.5 to a version which can read MP4 and AVCHD video formats?
    Philippe

    There are two solutions for you and neither of them offer any discount for already having version 1.5 since it was released over 10 years ago.
    You can atill purchase Premiere Pro CS6 (which will never, ever, be upgraded) and have it for a one time price, or, you can simply subscribe to the Creative Clould and get the latest and greatest Premiere Pro CC.
    To sign up for one product is $19.99 per month, and to sign up for all of them is $49.99 per month. That is just about every Adobe program from Premiere Pro, Audition, After Effects, Illustrator, InDesign, all the way through to Acrobat Pro.
    See here for a list of membership plans.

  • File Export Adobe Premiere Pro Project

    Which script (a line of code, probably) implements this menu item: File>Export>Adobe Premiere Pro Project?

    This may be helpful:
    http://aenhancers.com/viewtopic.php?f=8&t=889
    Mind that even when you can activate a menu command by this method you may not be able to control the resulting dialog via scripting.  That's one of the reasons why this method of accessing commands isn't published.
    If there's a function in After Effects that you'd like scripting access for, feel free to send us a feature request (yes, they do get looked at!):
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Exporting comp from After Effects CC to Adobe Premiere Pro CC (2014) gives error message: "AE can not connect to dynamic link"

    I am trying to export an AE CC comp into a Adobe Premiere Pro CC (2014) video project. I can not drage it from AE to Premier Pro.  Is there a problem with the dynamic link between these two applications?

    Dynamic Link only works between After Effects and Premiere Pro if the applications are of the same version---i.e., both CC 2014 versions.

  • What types of video files can be run on Adobe Premiere Pro CC 2014?

    What types of video files can be run n Adobe Premiere Pro CC 2014. Please answer this fast. I need it ASAP.

    Adobe Premiere Pro Help | Supported file formats

  • HT5918 Playback screen flickering from Adobe Premiere Pro

    When I use a secondary screen as a playback screen from Adobe Premiere Pro it flickers. Horizontal lines jump around and the desktop background occasionally appears. Tried to use the HDMI-output for live graphics on a television broadcast, but it could not be done because of this. Also the thunderbolt-output behaves like this.
    Anyone have a solution?

    http://helpx.adobe.com/premiere-pro/kb/playback-stops-loops-soundbooth-premiere.html

  • Rendering white flicker on the program monitor and output video file. How to get rid of this flicker in adobe premiere pro cc 2014?

    Hello,
    I have been working with long sequences in adobe premiere pro cc 2014. All of sudden, I see white flicker in the program monitor and rendered output too. The flicker does not follow any pattern. It is very random.
    How to work around on this?
    Regards
    Naveen Alle

    Concurrently working on the same project it requires a specific implementation in all editing programs like Avid's Unity/ ISIS shared storage. That's what you are simply not considering. none of your issues would be any problem if your projects resided on a commonly accessed server or something like that. Check respective hardware solutions.
    Mylenium

  • Adobe premiere pro cc 2014 - constantly crashing

    Naturally, my project is under deadline..
    My system is running OS X 10.9.4 (13E28)
    late-2012 MacBook Pro Retina
    2.6 GHz Intel Core i7
    16GB 1600 MHz DDR3
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M
    768Gb Flash Hard Drive
    My project consists of DSLR footage (h.264 compressed files) and Zoom H4N Audio (.WAV files)
    Even after spending most of Thursday and Friday on the phone with Adobe support; deleted all files from media cache, re-imported project, waited for premiere to re-conformed footage, etc..
    ...I still find my project loading sluggishly.. like it takes 15 minutes until video clips in the sequence will fully loads & appear in the project window... it becomes momentarily operable before quickly becoming inoperable as the video and audio no longer playback or respond to the cursor.
    At that point  (when playback no longer works) I can still save the project.
    It seems as though the software loses the dynamic link between the footage as it completely goes black.
    Then when I try to exit Premiere CC 2014.. the program locks up and crashes with no report.
    The crash reports I have are from a few days ago when they first began and before they stooped generating reports.
    Majority of the errors were:
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: EXC_I386_GPFLT
    It also crashed a few times with the following errors:
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x00007fff5fbfdef0
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000018
    Any help would be greatly appreciated!

    First I must say.. ADOBE PREMIERE PRO CC 2014 is glitchy as hell (and in my three weeks editing a documentary or rather two weeks bc I lost an entire week due to this issue) I have come to learn and identify some workaround solutions..
    Here is what I originally wrote after speaking to five different Adobe engineers...
    It is only an issue with PrCC2014 and the temporary solution before the upcoming update is to...
    1) Go into Preferences... Audio... and UNCHECK the box next to "Maintain pitch while shuttling."
    [this is a new feature in PrCC2014 that is processor intensive, causes audio dropouts, and is a major player in why the playback suffers]
    2) Go into your sequences settings for each sequence you have for DSLR footage and change the Editing Mode preset to "CUSTOM"
    3) Next scroll down to Video Previews and change the preview file format to "QuickTime" and the codec to "Animation."
    4) Uncheck the box  next to "Composite  in Linear Color (requires GPU acceleration or max render quality).
    [this is another new feature that is also processor intensive & is also a key suspect to the problem]
    THE KEY TO FIXING (temporarily) THE BEHAVIOR
    When your computer begins to show signs of the glitchy - sluggish playback behavior..
    Stop.. go back into your SEQUENCE SETTINGS and change it to a different EDITING MODE (only temporarily) and click OK.
    You could change yours from ProRes to CUSTOM (as indicated in step #3)
    Next a prompt will pop up asking you...
    Click okay then immediately go back to SEQUENCE SETTINGS and change it back to your original setting, in your case, ProRes.
    Somehow, by DELETING those PREVIEW FILES it essentially resets the issue... until the dreaded glitchy behavior returns.
    I have had luck with this trick and hopefully you will too..
    Cheers!

  • Adobe Premiere Pro CC 2014 Crashing very often! Please Help!

    Hello,
    I am currently editing my first feature on Adobe Premiere Pro CC 2014 and it is currently up to date.
    I am editing on a iMac 27in, late 2013 brand new computer.
    Processor: 3.5 GHz Intel Core i7
    Memory 32GB 1600 MHz DDR3
    Graphics: NVIDIA GeForce GTX 780M 4096MB
    System: OSX Yosemite V 10.10.1
    The project is located on a 8TB G Drive
    7200 RPM
    High Performance ThunderBolt drive.
    Details of the project:
    I am currently working on a fine cut of 5K Red Footage that is being cut in the RAW.
    I work at 1/2 quality settings and have no lag.
    The timeline includes limited stacked video files and various mp3 audio files.
    The Problem:
    Lately, the program will randomly quit or freeze up 4-5 times during an 5-6 hour edit session.
    Many times it is random, however, it seems to happen often if I accidentally click on the end of a clip on the timeline and it goes to switch into trimming mode. 
    Also, it will randomly go into the "pinwheel of death" out of nowhere followed by "Adobe CC is not responding."
    My project file is just about 15MB now.
    What is causing this reoccurring problem?
    How can I make it happen less?  I have scoured the forums and found similar articles but no helpful solutions.
    I have recently turned auto save on to save every 2 minutes because there have been more than one occasion where I lost A LOT of work because of this issue.
    I am about two weeks out from picture lock delivery and this issue is driving me crazy and loosing me a ton of time.
    Please help or let me know if any more additional information can help solve the issue.
    I have sent in well over 25 error reports already.
    Thanks,
    Thomas.

    I think I may have found the solution...
    I completely removed the Premiere Pro folder under User > Documents > Adobe and so far it seems to have solved the problem.
    I of course backed up my projects and than deleted this folder. So far it seems it worked.
    I'll know for sure in a day or two, but after constantly crashing, Premiere hasn't crashed for the last 4-5 hours of work.
    Goran

  • Problem update Adobe Premiere Pro CC(2014)

    Hello,
    when I try to update Adobe Premiere Pro CC 2014 the system give me this error "Unable to extract the downloaded files. To download please selected try again. (U44M1L210)
    Nicolò

    We can't know anything. You have not provided any system info or the detailed error report from the "Learn more/ More info" link.
    Mylenium

  • Adobe Premiere Pro CC 2014 has stopped working

    Today I've encounter an issue with Adobe Premiere Pro CC 2014 where it will crash on launch, with the error statement, Adobe Premiere Pro CC 2014.0 has stopped working. I've tried uninstalling, reinstalling, rebooting, uninstalling and reinstalling graphics drivers, with no avail. I was even connected to a tech support member who was helping me when the program crashed and now I can't reconnect with that member. I'm at a loss of what to do but any help would be greatly appreciated
    My Computer specs are:
    AMD FX-8350 Eight-Core Processor 4.00Ghz
    8.00 GB Ram
    Nvidia GeForce GTX 570 -driver GeForce 340.52 (7/29/2014)
    Windows 7 64-bit.

    A variety of issues can cause PPRO to crash on launch. Here are some of them:
    a problem with the Preferences, or some other pref-related file in the Profile-<USERNAME> bin.
    the graphics driver
    having an integrated graphics chip as well as a graphics card. Disabling the integrated chip often fixes this.
    having Nvidia CUDA drivers installed on a system with an AMD card
    third-party plug-ins
    a problem with the cache files.
    a problem with the project file (if you're loading a project...)
    folders that Premiere writes to being set to read-only
    the user not having administrator rights
    a conflict/incompatibility with some OS setting
    a problem on the licensing/authentication side.
    A log file might help identify the cause of the crash. Please right-click 'My Computer', select "Manage," look under 'Event Viewer->Windows Logs->Application' to see if there's an event there from Premiere Pro. If so, copy the contents of that log and paste them here.

Maybe you are looking for

  • CO posting statistical (11) and actual (04)

    Hi all Normally, when you post in CO with two or more objects one item is witten as actual the others as statistical, and nomrally is the cost center to be written as statistical. Example for a posting with cost center and internal order, the cost ce

  • Dreamweaver MX 2004 .....:::FOR SALE:::...

    Hi all, I was searching for Dreamweaver MX 2004 (i went for Dreamweaver MX 2004 because I am not a pro. designer and i didn't need Dreamweaver 8, was too expensive), but i could not find it. I am sure there are those who are out there looking like i

  • Regarding Business System and Business Service

    Hello, What is the difference between the Business system and Business service. When do we go for what? Which system we will take as business system or business service means either sender system or reciever system. Give me with simple example... ple

  • Windows xp embedded network tcp/ip problem

    We are running a TCP/IP connection using Labview under windows XP. Periodically, under windows XP, our server crashes. We do not seem to have this problem under windows 2000. The server code is based on the Labview examples and writes the data it two

  • Problem in WD applications that use table footer area

    Hi, Applications that use table UI with footerVisable = true, have sometimes performence navigation problems , when we use one of the pushbottens the application stuck. Any ideas ??? Thanks Fanie.