Change MRU Size for a PPP Dialup Connection

Hello,
I need to lower the MRU Size for a modem PPP connection.
Do do that, I tried to add a /etc/ppp/options file as descripted in the man pages (man pppd).
Unfortunatly Tiger ackn. then received MRU size of 1524 even
I adjusted the PPP MRU size to 1280 (IP V6 min.).
This setup doesn't work, When I transfer larger packets the connection breaks down.
How to setup a MRU size for a PPP connection?
And fix the man pages please.
Thanks
Henri Hoffmann
PowerBook:/etc/ppp henrihoffmann$ cat options.ppp0
debug
mru 1280
mtu 1280
Fri Dec 16 16:04:05 2005 : Connect: ppp0 <--> /dev/cu.BluetoothISDNAccessPoin-2
Fri Dec 16 16:04:06 2005 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd8ad45df> <pcomp> <accomp>]
Fri Dec 16 16:04:06 2005 : rcvd [LCP ConfReq id=0x1 < 00 04 00 00> <mru 1524> <auth pap> <mrru 1524> <endpoint 13 09 03 00 c0 7b 80 7b 8d>]
Fri Dec 16 16:04:06 2005 : lcp_reqci: rcvd unknown option 0
Fri Dec 16 16:04:06 2005 : lcp_reqci: returning CONFREJ.
Fri Dec 16 16:04:06 2005 : sent [LCP ConfRej id=0x1 < 00 04 00 00> <mrru 1524>]
Fri Dec 16 16:04:06 2005 : rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
Fri Dec 16 16:04:06 2005 : sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xd8ad45df>]
Fri Dec 16 16:04:06 2005 : rcvd [LCP ConfReq id=0x2 <mru 1524> <auth pap> <endpoint 13 09 03 00 cFri Dec 16 16:04:06 2005 : lcp_reqci: returning CONFACK.
Fri Dec 16 16:04:06 2005 : sent [LCP ConfAck id=0x2 <mru 1524> <auth pap> <endpoint 13 09 03 00 c0 7b 80 7b 8d>]
Fri Dec 16 16:04:06 2005 : rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0xd8ad45df>]
0 7b 80 7b 8d>]
G4 Powerbook Mac OS X (10.4.3)

does not fit. I need to change a ISDN modem PPP connection.
By the way, the PPP controller overrules the MRU and MTU settings in /etc/ppp/options. I hate when a vendor decides to overrule the seetings made by a user (customer!). Therfore I dont like MS.
And options descripted in man page which are overruled by the system .....
It took my at least 6 hours to debug the stuff with ethereal. The connection breaks when the powerbooks segments a packet (1 pice len=1448, second pice len=98. In this case a packet get lost somewhere.
I need this stuff working, the alternative is only the travel with a Powerbook and a Thinkpad to have a ISDN connection to a very importend customer of mine.
Please give me a option to controll this stuff !
Thanks
Henri
G4 Powerbook Mac OS X (10.4.3)

Similar Messages

How do I change packet size for a single load

All,
I need to change the packet size for a single load I'm doing. How do I set that?
Thanks.
Dave

Hi..........
For this u hav to go to the infopackage scheduler........
If u r in Process chain >> Right click on the infopackage >> Maintain variant..........then it will come to the IP scheduler..................In the Top Scheduler Tab >> Click on it and select DataS. Default data transfer .......Now there may be a delta IP and Full upload IP for the same datasource.......check ur IP .....it is full or delta..........if full change the packet size for full upload..............otherwise for delta upload........
If the IP is not a part of any Process chain..........then go to RSA1 >> Find the IP..........and double click on it........then the IP scheduler screen will open..........
You can make global settings for all datasources...... in the transaction SBIW in the area General Settings >> Maintain control Parameter for Data transfer......... The parameters that you maintain here are valid as global standard values, and thus apply to all DataSources.
Hope this helps.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Nov 13, 2008 2:19 PM

How to change font size for certain domains in Safari

I want to increase the font size for a few websites that have font's sizes I can't read. I already use a CSS file that changes my link colors so I can modify that files if that helps.
Here's a website I need to change http://www.boxofficeguru.com/weekend.htm. Whenever I go to this page I have to increase the font size and when I go to a different site I have to make the font size smaller. Any ideas?

If there are really only a few sites that you have problems with, just go to the site, and click the Command key along with the plus key. This will temporarily increase the size of the type.
Command and the minus(-) key makes type smaller. These commands will work on a per site basis.
You might also want to check out the "Posts Like This" list to the left. >>>>>>>>>>>

How to change font size for tracks in Songs view, iTunes 11?

I'm wondering which field in TextStyles.plist for the new iTunes 11 (I've gotten rid of Helvetica for Lucida Grande thanks to another forum on here!) - controls the font size for track title, time, artist, album, etc. as seen here - I would like to have it smaller, and have been playing around on several forums and not found the magical field to get that exact thing smaller. Many thanks in advance.

You're going to love me forever:
<key>9002</key>
<dict>
<key>- loc hint -</key>
<string>List Contents (Small)</string>
<key>font</key>
<string>HelveticaNeue</string>
<key>size</key>
<integer>12</integer>
</dict>
It's that interger "12" that's determines the size. Adjust it until you're happy—provided that it's an interger.
I actually go with "HelveticaNeue" with a size of 11. I like to see lots of tabular information at once, horizontally, without changing my resolution… within reason, e.g. Fiona Apple album titles still have ellipses.
An unfortunate aspect to this is that the row height isn't altered unless the font size specified is greater than 12—the font takes the row height along for the ride when it's bigger, but the row doesn't come along for the ride when the font gets smaller. It's likely you could change the minimum row height to be lower, in some other plist—search for something like "list contents (small)" or "list (small)" or whatever—but I don't know where that would be found, or if it could be found at all.
Nonetheless, this should address your query.

Can I change background size for websites?

Hallo,
I am building a website in flash and was wondering if it is possible to change the background size for each page of a website that I build in Flash?
I know how to change the template background etc. but I changed the background size to a bigger size on page 3 and now the whole site is like that.
just wondering
thank you
Riaan

Yes you can, but it depends on how your site is set-up. Do
you have separate SWFs for each page or is you entire s
ite built into 1 SWF? In order to have your
pages be different you will want to
break the SWF into to separte parts which ulimatly is better anyways, it allo
ws you to increase you SEO which can be difficult with Flash site anyways and it helps with loading.
Anyways have your pages be the size you want them and when linking page to page use your getURL commands.
And then when you put them into a HTML doc, focus on your container style and make that differ from page to page.
Hope that helps.

"Preview," how to change font size for when you "fill in the blanks" in a pdf file?

In the pdf reader, "PREVIEW,"
I specifically want to find out how to change the font size for "fill in the blanks" information. They're usually huge and i just simply want to make them smaller.
As a complete aside, is there a keyboard shortcut for being on google chrome or safari, then immediately opening the window for "preview." I'm typing notes out on preview while listening to a video lecture on my web browser, usually chrome, and i'd like to switch back and forth.
Thank you, I'd greatly appreciate any advice.

HI Velders,
Can't answer your first question but can offer some information regarding your 'aside.'
Command-tab will move the focus to the most recent previous application. If repeated, it will step through the pen applications from most to least recent. In your described case, you could use command-tab to toggle between Preview and Safari.
Command-~ runs you through the open windows in the same application. As with command-tab, the steps are from most to least recent.
Regards,
Barry

Changing "normal size" for QT file?

I am not sure what this is but I guess it is the default size of the movie when it opens. Is there a way to change this value for a movie? I have looked at the AppleScript dictionary, but cannot see it listed.

I come from the "old" Internet where file size is important. Big files don't work well with my dial-up so I've learned some tricks to keep my file sizes small.
http://developer.apple.com/samplecode/samplemakeeffectmovie/samplemakeeffectmovi e.dmg
I don't know how this app may work on an Intel machine. Rosseta is required.
Its purpose was to combine two movie files and allow a transition (millions of combinations). Since I was using still image files I first had to give them "time". I added them "scaled" to a ten second sound file then extracted this new 10 second video. Still file sized as if a single image.
Once I had merged two of these new files it became a new .mov file. Then it was copy/add scaled to add them all into a new file (the sound track). Last was the Texas map over the entire file.
Try doing that with iMovie!
And an iMovie file would have measured fifty times larger in file size.
Tips and tricks can be found in my book.
Terms of these Discussions require I state I may receive compensation from the link above.

Changing font size for motorola droid's emails

Hi, is there a way of changing the font size with the motorola droid, when working with emails? The emails font seem a bit small. a Little hard to read. I'd like the font to be larger.
Thanks.

I tried Spare Parts, because I have the same problem with the font size on email - way too small for these 50-year old eyes. It does not work on email. In fact it says in the Spare Parts menu under Font size "this only works within this screen." I'm using an LG Ally, BTW.
Any other ideas for increasing font size for emails?

Change font Size for Lock Screen Message

In system preferences Security & Privacy you are able to set a lock message for the lock screen. Is there a way to change the Font Size or even the color of the message in Mavericks?

I was able to set the font size for all the text on the envelope by pressing the Set button for the font. The size is on the right side of the dialog box. If it is not working for you, try choosing another font, and then going back to the one you want.

Changing screen size for screen sharing

Is there a way to change the screen size for screen sharing?
I have a 13" macbook and a G5 with a 20" monitor. When I use RDC to a PC it automatically adjusts to use the full screen on the G5 and when I use VNC to a linux system I can create a vncserver with any arbitrary geometry that I want, but when I use screen sharing all I seem to be able to get is a 13" screen. I can use JollysFast VNC, and view it full-screen, but it's still just 1280x800.
So, is there anyway to create a virtual window so that I can take better advantage the screen on my G5 when screen sharing to my macbook?
Thanks,
Rob

Well, the question should really have been, "What is the ideal page width for the iPad?".
The answer is that there isn't one since the iPad, like most portable devices, has two screen widths depending on whether its used in portrait or landscape mode.
If you are designing a layout specifically for the iPad, one solution is to use a folding design where the sidebar folds down to the bottom in portrait and jumps back up to the side in landscape. This will only work for personal computers and iPads.
The popular way of designing a layout to suit a large range of portable devices is to use a liquid, or semi liquid, layout that will automatically adjust to the fixed width browsers used on these devices.
Something like this...
Neither of these methods are possible using a template based editor like iWeb and this is probably one of the main reasons that Apple has given up on the application. Surfing the internet on mobile devices is growing daily and its now become essential to have a mobile version of your website or one that can be viewed on all devices.

How to change font size for lyrics for Ipod in the IPad 2?

Just bought an IPad 2 and need to increase the font size for lyrics I have added to ITunes/IPod. Is there a way to do this or an application that will do it?
Thanks in advance for your help!

Nope. Sorry.
http://www.apple.com/feedback/ipad.html
-SM

Using Frame API for C, Need to change Data size for a TX Object

I need to Transmit different messages to the same ArbitrationID address. The Transmited messages have variable lengths. Can I call ncConfig on an object to change the NC_ATTR_CAN_DATA_LENGTH even after the call to ncOpenObject. Or do I have to Close the object and reopen it after the call to ncConfig?
Thanks!

Hello Genesis,
your second assumption is right. You do have to close, reconfigure and reopen the object in order to change the data length.
As long as you're using the CAN Object in the 'Transmit Data by Call' mode only, you might want to consider using the Network Interface for transmitting. When you use the Network Interface, you can change the ArbitrationID for each write call.
-B2k

Change font size for {module_shoppingcartsummary} display

This is probably really simple, however I have defined a font size for a header in which I have placed the {module_shoppingcartsummary}. All items in the header dsiplay as reflected in my defined font size witht the exception of the displayed results for this module. How can I get the results for this module to diplay correctly?
Thank you.

Hi,
Look into your system CSS files (either modulestylesheets.css, etc) this can easily be found using Firebug.
In my example it's located in the all.css file under .cartSummaryItem.
Another example showing in modulestylesheets.css
Hope this helps!
-Sidney

Change Font Size for Table Column

Hi,
How can we set different font sizes for table columns?
Thanks,
Uma.A

Hi
Set Design property of table column
Aslo check this link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/66/18b44145143831e10000000a155106/frameset.htm
Thanks

Change page size for PostScript file?

Hi,
While trying to stream Java2D objects to a PostScript file using Java Printing API, I found I couldn't change the page size, it always gives me ISO_A4 size. In the following modifed sample from printing doc, even if I changed the book's page size and printer media size attribute, it still gave me ISO_A4 size.
thanks for your help
Frank
==== Code ====
import java.io.*;
import java.awt.print.*;
import java.awt.*;
import javax.print.*;
import javax.print.attribute.*;
import javax.print.attribute.standard.*;
import java.util.Date;
public class Print2DToStream2 implements Printable {
public Print2DToStream2() {
DocFlavor flavor = DocFlavor.SERVICE_FORMATTED.PAGEABLE;
String psMimeType = DocFlavor.BYTE_ARRAY.POSTSCRIPT.getMimeType();
StreamPrintServiceFactory[] factories = StreamPrintServiceFactory.lookupStreamPrintServiceFactories(flavor, psMimeType);
if (factories.length == 0) {
System.err.print("No suitable factories");
System.exit(0);
try {
FileOutputStream fos = new FileOutputStream("C:/WUTemp/out.ps");
StreamPrintService sps = factories[0].getPrintService(fos);
DocPrintJob pj = sps.createPrintJob();
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
aset.add(MediaSizeName.NA_LEGAL); // no effect
aset.add(OrientationRequested.LANDSCAPE);
Book book = new Book();
PageFormat pf = new PageFormat();
Paper p = new Paper();
//p.setSize(595, 842);
//p.setImageableArea(0,0,595,842);
p.setSize(612, 1008); // didn't take it
p.setImageableArea(0,0,612,1008); // didn't take it
pf.setOrientation(PageFormat.LANDSCAPE);
pf.setPaper(p);
book.append(this, pf);
Doc doc = new SimpleDoc(book, flavor, null);
pj.print(doc, aset);
fos.close();
System.out.println(new Date());
} catch (PrintException pe) {
System.err.println(pe);
} catch (IOException ie) {
System.err.println(ie);
public int print(Graphics g,PageFormat pf,int pageIndex) {
if (pageIndex == 0) {
Graphics2D g2d = (Graphics2D)g;
g2d.translate(pf.getImageableX(), pf.getImageableY());
g2d.setColor(Color.black);
g2d.fillRect(0,0,200,200);
g2d.drawString("example string", 250, 250);
System.out.println("printing ... ...");
return Printable.PAGE_EXISTS;
} else {
return Printable.NO_SUCH_PAGE;
public static void main(String args[]) {
Print2DToStream2 sp = new Print2DToStream2();
}

It turned out that it was the PS viewer mislead me. There is nothing wrong in generating PS file.
Frank

Change MRU Size for a PPP Dialup Connection

Similar Messages

Maybe you are looking for