Change multiple passwords in one operation

Dear all,
I'm currently looking for a way to change imap, smtp, caldav and carddav in a single operation instead of having to change each one manually. This is because of our company's password policy, every time a password expires, users usually forget to change one of these passwords, causing the iPhone to try many connections with the wrong password, which leads to the account being locked. So the best solution would be to find a way (maybe an app ?) to change all these passwords in only one place. Could anybody help me ?
Thanks in advance,
Regards

Sorry. there is no way to do that.

Similar Messages

  • I changed the password to one of my gmail accounts. My MacBook Air accepts the new password and shows me email, my iPhone 5s tells me it's not a valid password. In settings, I change the password and pw is accepted. How can I get 5s to accept new pw?

    I changed the password to one of my gmail accounts. My MacBook Air accepts the new password and shows me email, my iPhone 5s tells me it's not a valid password and does not show me email. In settings, I change the password and pw is accepted. How can I get 5s to accept new pw?

    CORRECTION! GMAIL accepts new pw and shows me email. Mail on MacBook Air and iPhone 5s do not accept new gmail pw. What can I do to get my apple products to accept my new gmail pw?

  • I had to change my password for one of my Email addresses and now I can not get mail into Firefox.

    I had to change my password for one of my Email accounts ([email protected]) and now I can not get the mail to go into Mozilla Firefox and I don't know how to change the password in Mozilla to get the mail into it.
    I looked at how to change my password but the options you told me to use were not available. I clicked on tools then options but there was no sync tab or manage accounts either.

    The login.salesforce.com website is using autocomplete=off to prevent Firefox from saving the name and password.
    You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered

  • Multiple Passwords on One Website

    Is Safari not able to track multiple passwords on a single Website? On my work's Website, there are a number of distinct areas of the site that require different logins. If I save a password in one area, the next time I go to a different area, the password that was saved there has been replaced by the one from the other area. It seems to be saving the passwords by domain and not by individual page. Is there something I can change to correct that?
    == Sean

    Bujin wrote:
    ... I don't generally like to have the same password everywhere though.
    It would be nice if Apple made the saves more specific.
    I agree, and that would be good reason to submit feedback to Apple about this, using their Mac OS X feedback form.
    But you don't have to use the same password. (I'm not sure if that's what you meant.) Safari saves multiple username/password sets. In other words, for username A, it saves the corresponding password A. If you begin to type in username B, it will autofill the corresponding password B.
    (Edit: I think I see now that you're saying you're using the same username in multiple places, so you can't know what password Safari is filling in. That's a problem, you're right. :-| )
    Message was edited by: Rachel R

  • My partner's iphone was stolen last week and the password to her apple ID was changed. They have control of the email and Microsoft won't let her change the password for one month. She has bought a new Iphone and wants to activate it. What can she do

    My partner's iphone was stolen last week and they have changed the password to her Apple ID. They also have access to her email. She can't change her email password for 1 month. She has bought a new iphone. How can she get it activated?

    She may want to contact Apple account security: Apple ID: Contacting Apple for help with Apple ID account security

  • Change center of multiple clips in one operation

    Say I have 10 JPG files each as 10 second clips. I drag them to the timeline, I select all of them. I now want to move all of them into the top left quadrant of my canvas. I can't see how to do it given that motion seems to be set on a clip by clip basis. Is there some way of creating a filter that I can drag onto the selection to affect all clips? Again I can't seem to see one in the filters list. Is it a question of joining all of the clips into a single clip and thus applying a single motion in the viewer?

    Adjust one image the way you want it. Copy, select the images, and use the paste attributes function.

  • Would like to be able to select and move multiple folders in one operation.

    Unless I'm missing something really simple here, there doesn't seem to be any easy way of selecting and moving multiple folders at once.
    Here's a little example of a simple task I want to do. I presently have a multitude of folders each seperated by the day the photo was taken on. So in my case for a given year I might have maybe 50 folders or so. It's getting a little cluttered, so all I want to be able to do is to take all the folders for one given year and place them in a folder with that year's date. This should be a simple 30 second task, simply select the folders I want moved by either <CTRL> or <SHIFT> clicking them, and then dragging and dropping them into the new folder.
    Right now, the only way I've figured how to do this this is to drag and drop each folder one by one, never mind that this is a slow process in itself, but to add to the slowness, whenever I try to drag and drop more than one folder consecutively, I get a message saying ... "Can not move a folder while another move operation is in progress...blah blah". Not that I want this to be the fix, but haven't they heard of queuing?
    I've seen people on the net suggest that for this type of task, you should simply move the folders in Windows first and then locate them in Lightroom. Again, unless I'm missing something very simple here, there doesn't seem to be a way to locate multiple missing folders at once. If I have to manually locate each missing folder one by one, then I'd rather just do the drag and drop thing as this would actually be faster.
    I've also tried moving the folders from within Windows first and then using the "Synchronize folder" option, yeah sure this works, but I lose any changes that I've done in Develop module. Not what I'm looking for.

    Daniel is right. It´s really strange that I can´t move several folders in one move! When I need more space on my laptop I move a group of folders (one folder for every photosession) to an archive. Therefore I really would like to move them in one click, not "baby-sitting" the move of each folder.

  • How to Change multiple keys on one loop in one track

    Several one-to-one lessons fail to reveal how I can change loops key independent of other loops. Example, take a loop and loop it four times in one track, trying to make first loop E, second loop A, third loop B, fourth loop C. Seems when I change one, they all change to the new key. Anyone know how to create independent control over each segment?
    Message was edited by: TomRin

    See this support article:
    Record multiple takes:  http://help.apple.com/garageband/index.html#gbnda1184253

  • Storing multiple passwords for one web site

    I go to one web site that I have over 30 different user accounts that I access. Is there a way to have Firefox remember all of the user account login and passwords?

    You may be able to do that with the LastPass add-on https://addons.mozilla.org/en-US/firefox/addon/lastpass-password-manager/
    I don't know about the maximum but it does support multiple info for the same domain / URL. Please note that the app is basically a secure online backup solution for passwords and whatever is created is mirrored to an online backup site.

  • Safari not remembering multiple passwords for one site

    My ffriends and I use safari on my iPhone and thus have multiple login information for one site like facebook. A few months agowe were able to go to a site, start typing in the user name and password, and Safari would show us a highlighted list of the login info that had been saved. You could then click on that info and get logged in.  But that feature stopped some time ago and I can't figure it out.  Now Safari only remembers the last login info.  It still works the way it used to on my iMac and MacBook Pro but not the iPhone. Does anyone know how to fix it?

    when the keyboard is open hold on the happy face for a second and from the menu list that pops up turn off the switch for PREDICTIVE.  That did it for me. When I start typing the firts letter of the login name now it predicts in yellow and I press space and fills it in, then I have to press the delete button to remove the space before pressing enter.

  • Multiple Passwords on One Page?

    Is it possible to have Safari remember multiple log-ins for one page. I know IE can do this and am wondering how I might do this for Safari. As I understand it, if I save a new password for a page when prompted by Safari it will overwrite the one currently stored, right?
    Thanks for any help!
    --LM

    i use many sites with multiple logins, just keep clicking on the "yes" to saving login info. you can then click on the empty login space and scroll or it will find as you type.

  • [SOLVED] Need to change root password - current one doesn't work

    Hey everybody,
    Not sure where to put this, so I apologize if it's in the wrong forum.
    I just installed Arch on my Dell netbook and all is well, except for issues with the root password. I am having a great deal of difficulty getting it to work. I know for a fact that I am typing it correctly. However, I did have trouble getting it set during the installation. When I try several times, I have gotten it to work, but I am getting tired of having to do that, and now I can't seem to get it to work at all. I have even tried a different keyboard, but with no luck.
    Is there any way to change the root password short of a reinstall?
    Thanks in advance for any help, but please keep in mind that I am relatively new to Linux and would greatly appreciate detailed instructions.
    Jeff
    Last edited by jlr1701 (2010-08-12 04:10:50)

    Solved. Should anyone else have this issue, I solved it by entering this command:
    sudo passwd root
    I set a new password and it seems to work fine.
    Didn't know if it was possible to change the root password that way, but glad it worked!

  • The Nike  webstie made me change my password; now my iTunes account can't link my runs. How can I update the password in iTunes?

    Nike+ forced me to change my password to one which had a capital, lower case and number in it ... all very well BUT iTunes can now not link my iPod runs to the Nike+ website as the passwords are different. How do I update the password in iTunes? I have tried unchecking the "sync" option and checking it again but can see no option to update email and / or password.

    Did you go on-line and fix your billing information? You probably need to do this from iTunes on your computer, not your phone.
    If you've double checked your credit card info and it still won't take it, contact your card issuer.

  • Change duration of multiple still images in one operation

    Hello Folks.
    I am trying to change the duration of each image in a sequence of still images.
    Program: Adobe Premiere Elements 7
    Mode: Standard Definition 4/3 ratio
    File types in use: MOD, AVI, PNG
    Problem: The product manual states: "To apply the new default length to all still images in your project, delete them from Project view and reimport them into your project."
    Question: Is there a way to select a group of still images and then apply a new duration value to all of them in one operation?  An Adobe salesperson told me that this is possble before I purchased the program, but I cannot figure out how this is done. I switched to Adobe from another product in order to get this feature. Now that I need it, I cannot figure a way to get it to work. Time Stretch is not available when I select multiple images.
    Thank you,
    Brian

    Brian,
    Unfortunately not. PrPro CS4.2 has just added a way to change the Duration of previously Imported stills, but so far PrE does not allow for this, unless it is new to PrE 8, but I have not read of this.
    As noted, the method is to set the Edit>Preferences>General>Default Stills, and choose the Duration in Frames. Then Import the stills. If they are in the Project, that setting has already been applied, so one must delete them from the Project Panel and re-Import them with the new Duration.
    Now, one can obviously change the Duration on a one-by-one basis in the Timeline, but that can be tedious, if there are many stills. If I were doing this, I would make sure to have the Info Panel open and nearby, Window>Info.
    Good luck,
    Hunt
    PS - if PrE 8 HAS added the post-Import Duration change, I hope someone steps up with that info.

  • How do I create multiple live USBs of Operating systems to boot from on one flashdrive?

    How do I create multiple live USBs of Operating systems to boot from on one flashdrive?
    I am attempting to create multiple live USBs within one flashdrive so that i can boot various operating systems without having to buy multiple USb sticks. I am using a Mac OS X Snow Leopard 10.6.8 Operating System currently. I am using the Terminal provided by the OS.
    I would like to try Debian, Kali, Precise Puppy, and Sabayon- with one space left empty for whatever Linux OS I would like to try next. I have partitioned an 8GB flashdrive into the following sections:
    name of intended OS,     space allocated for it:
    1)Debian ........................1.32 GB
    2)Kali..............................2.61GB
    3)Precise Puppy..............163.7MB
    4)Sabayon.......................1.77GB
    5)TBD..............................2.14GB
    I have figured out how to change the .iso files of the operating systems into .img files with the following commands:
    hdiutil convert -format UDRW /path/to/input.iso -o /path/to/output.img
    a .img.dmg file is created, this is corrected in the next line of code *please note: I am a a very beginner at programming, and would greatly appreciate any help. Thank you!
    mv /path/to/output/file.img{.dmg,}
    This is where I started to get confused:
    I entered diskutil list to find the location of the partitions on my flashdrive, and this is the relevant section:
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *8.0 GB     disk1
       1:                 DOS_FAT_32 DEBIAN               1.3 GB     disk1s1
       2:                 DOS_FAT_32 KALI                    2.6 GB     disk1s2
       3:                 DOS_FAT_32 PRECISE            163.7 MB   disk1s3
       4:                 DOS_FAT_32 SABAYON           1.8 GB     disk1s5
       5:                 DOS_FAT_32 TBD                     2.1 GB     disk1s6
    This is the code I attempted to use and the subsequent result:
    charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
    dd: /dev/disk1s1: Resource busy
    *at this point I went to the Disk Utility GUi and unmounted only the DEBIAN partition, now back to the terminal*
    charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
    dd: /dev/disk1s1: end of device
    1259+0 records in
    1258+1 records out
    1320005632 bytes transferred in 1011.966891 secs (1304396 bytes/sec)
    Please may someone help explain why I had a return value of +1 in my records in and how I can make it work properly.

    I would like to know the answer to this as well.  I tried renaming the 3D version by adding 3D after it, but it still not a separate movie in iTunes.
    It's putting them in the same folder.

Maybe you are looking for

  • Popup on click of a toolbar button during the call

    Hi, I created a custom button in the Interaction center toolbar to open up a decision popup. The popup opens fine when i am not in the call whereas if i am in a call the popup doesn't open. Is this the standard behaviour? If that is the case is there

  • AFP not letting users log in

    AFP is not allowing the Open Directory users to authenticate and access the server of you use Go to Server. From the Finder sidebar it will work.

  • How do I get an app into the ipod touch?

    I downloaded the ibooks app and it's in my itunes application library. I've synched several times, but the application is not being installed on my ipod touch (2nd generation, ios4.2). What do I need to do to get this installed?

  • I cannot open a file with suffix .ra

    i cannot open a file with suffix .ra

  • Append text to logfile

    Can someone tell how to append text to a logfile? I use this function, but all existing text is always destoyed: function schrijf_naar_log(bestandsnaam){ var log_bestand = File((Folder(bron_map)) + "/log.txt"); log_bestand.open("e"); log_bestand.writ