Change Mvt type after GI.

Dear All,
Can i change movement type after Goods Issue n if not........... what to do? bcoz i entered wrong Mvt type while creating GI.
can delete GI?
or Reversal entry.....
Thanks
M. Zafar Saeed

Hi,
Instead of Reversal the document, better you can cancel the material document.
During reversal, you have to enter reversal movement type and remaining details manually.
But to cancel the document, just you have to enter document no. Then system will take reversal movement type and other details automatically.
Cancel the material document, which is created at the time of GI using transcation MBST.
Transcation : MBST
Enter material document no and enter.
just save the document. System will cancel the material document.After then, you can do GI with the proper movement type.
Regards
KRK

Similar Messages

Changing doc. type after creating a doc. type.

Hi Friends,
We are doing our time ageing from the time of creating the document in DMS. We created a document with particular doc. type wrongly, after two days we found that the DMS creation was done with wrong doc. type. In this how to transfer to new correct doc. Type, if we delete this & create a new we canu2019t get any info that it was created two days back.
We made Z report for this time ageing report.
Regards,
Sai Krishna

You cannot change the document type after the document has been created. The only way to do this would be with an enhancement and this would create major issues with the integrity of your system

How to change page type after the fact

In the application builder, I click on an application and choose Details in View.
I get the list of pages I have in my app.
The page type column has:
Interactive Report
Navigation Form
Dynamic HTML
DML Form
Chart
Report
How do I change this column after a page has long been created?
Specifically, I want to the change "Dynamic HTML" to something else.
Why?
Because on this particular page, tabs do not work (error: page not found).
Buttons created among a regions items do not work (same error, page not found).
I need to use tab and buttons to go from this page to other pages.
And I am suspecting the page type may have something to do with my problem.
Thanks in advance for any pointers.

Thanks for your consideration!
For my current app, a clinical management system,
I'd like to have, say, 1000 items.
(For other applications I am thinking about, but have no time,
nor expertise for now, I'd need millions of items,
each corresponding to a pixel of a graphic.)
Who cares if the current computers are too slow?
How about make it a parameter that can be changed
per app or per apex installation, and default to 100?
Some forms can be broken up logically, as people have helpfully suggested,
and I did follow that advise on some pages.
But other forms cannot be. People have put a lot of thought on designing
those forms, they are government or legal standards (or at least something more important
than computer performance), and people have been trained
with those original forms.
Consider the hoops I have to jump through to get more than 100 items
on a page I am currently working on:
Generate the items (INPUT type="text" and INPUT type="checkbox") using PLSQL
lots of htp.p('<INPUT ...>').
a JavaScript function to collect all the values on the page
and make up an XML string. submits this string to an application
process, and application process parses the XML string and does insert or update.
Another JavaScript to populate the items based on the current values of a row,
using an application process to retrieve the columns of a row.
There are about 150 items on this particular page.
All these are ok, because I was aware of the restriction of 100.
And because I wanted to generate my own HTML to mimic the original
form anyway.
Then things started to go weird.
I need buttons to go back to another page. and I use tabs.
Buttons to go back from this page,
when a button is created with "Create a button in a region position",
it works fine.
When a button is created with "Create a button displayed among this region's items",
it does not work, and I get HTTP 404, https://.../apex/wwv_flow.accept, page cannot be found.
But I need a button to work like the one created with "Create a button in a region position",
but displayed like the one created with "Create a button displayed among this region's items".
This is still not too bad. I saw the difference between the two kinds of buttons.
I copied the HTML code for the button "Create a button in a region position",
and used a display only item to create a Back button where I wanted:
'<table class="t15Button" cellspacing="0" cellpadding="0" border="0"><tr><td class="t15L"><img src="/i/themes/theme_15/button-l.gif"/></td>'||
'<td class="t15C">Back</td>'||
'<td class="t15R"><img src="/i/themes/theme_15/button-r.gif"/></td></tr></table>'
Here P145_BACK holds the page number to which I want this page to go back to.
Then I noticed that the tabs did not work any more. same error, page not found.
That's is when I got a little frustrated and posted for help on the forum.
Then I begin to undo my steps, and
by lucky accident, I noticed that, if none of the checkboxes is checked,
the tabs work fine. If at least one is checked, I get this error, page not found.
My current solution is to add a function of my own in the doSubmit(B) function in file apex_3_1.js,
which unchecks all checkboxes (o.checked=false).
And now, from this page of about 150 items,
the tabs are ok, and I have a button that is similar to one
created with "Create a button displayed among this region's items", except I created myself
using HTML.
I think this trick of using a custom function in doSubmit(), that unchecks or even hides
INPUT type="text" items (o_div.style.visibility = "hidden"; o_div.style.display = "none";)
should work in general. this function is only invoked when the user clicks the tab,
or buttons among a region's items.
Somebody said regarding restrictions on drugs or sex.....
you will not make people stop, you just make it harder or more expensive.
Same here and many other things, a restriction is just making things harder.
People will try to get around it.
Now that I have a solution, and I am aware of the problem, I'll calm down and
go back to my own thing for now.

Changing Document Type after making progress with project. Is it possible?

Can I still change my document type after I already started my project? I want to change it to print type.

Just what do you mean by "print type"?
Do you mean changing the document Color Mode to CMYK color from RGB color? If so, sure, you can do that at any time.
If you mean changing the "file type" (file format) (say from PSD to TIFF, etc.) you just do a Save As to create a new document in whatever format you want.

Can we change material type after creation of material

hi all ,
can any body tell me how we can change the material type of already created material , i have a material type (do not use raw material) which i want to chage in raw material
please reply

Hi Manjit
Try transaction MMAM
It may not work if you have some differences in field selection between the old material type and the new material type (e.g. batch mandatory in old material type and hidden in new material type)
It may not allow processing if stock has already been posted
Regards
Steve

How to stop 261 and 262 MVT types after GR for production Order.

hi,
After GR [MB31] against the Production order, 261 and 262 movments should not be happen, but in present proces its taking place,
Client dont want to happen it,
Can any body tell me how to controll this.
Veera.

Hi Veerakumar ,
You can TECO the production order if reqd since delivery complete status of the order.
or you can go to system status and do as explained .
Regards,
Vimal

Adobe Pro 9 Scanning - Change Scan type after Prompt to scan more

I have an end user who is using Adobe 9 Professional to scan pages to PDF. The pages they are trying to scan contain mostly text documents but there are times when there are some photos that are mixed in. The problem they run into is when they scan the text as White/Black option, the photos come out really dark. They normally need to rescan them as a different option to be able to see the scanned image correctly. The end user believes that in Adobe 5, they used to have the option to scan more pages and choose the type of scanning option when they choose to scan more pages. They are looking for this option in Adobe 9. Currently they have to save multiple documents and then combine them to be the one document they are looking for.

** SOLVED FOR ME **
Acrobat 9.0 and 9.1 Standard
No v9 properties toolbar access except in last document opened
I don't know if this applies to you but I had a similar problem with documents on our network.
It turns out the documents were being saved as PDF/A or PDF/X format.
I had the users open up Adobe. Go to Edit>Preferences Then go to the Documents section and find the "Open in PDF/A" section. I had them select "Never" and then the toolbars were no longer greyed out.

Storage location is not updated after posting GR with Mvt type 107(Valuated GR blocked stock)

Hi experts,
Before posting GR through Movement type 107 (valuated GR blocked stock) we can see the storage location field in MIGO screen and able to enter value into this field. But after posting GR when we retrieve the material document we are finding that the field (storage location) is blank, i.e. it's not updated at all. When we check the stock in MMBE we find that no quantity is updated for valuated GR blocked stock.
We want the storage location to be updated while posting GR with 107 Mvt type.
Any idea Please?
Points assured.
Thanks
Amitava

SAP describes it in help.sap.com: Since the material is not to be added to the inventory yet, do not enter a storage location.
If you require a storage location, then I assume that your design does not match with the design of SAP, you are using a function to solve a gap which is not foreseen by SAP for this case.
Especially the 107 is usually representing stock which is still in transfer but you are already the legal owner and have to show the value of those goods in your books.

How to change datasource type 3.x or new after replication?

Hello,
after the replication of a datasource i got a popup, if i want an old 3.X datasource or a new datasource. I clicked new, but i need an old 3.x datasource. Now i don't have a chance the change this.Where can i do it?
I deleted the datasource in sourcesystem, but after new replication i don't get the popup to choose the datasource type.
The problem is, i can't change the technical name of the datasource in sourcesystem because of the naming convention.
Thanks in advance.
Regards.

Hi Bill,
it's a generic datasource i created.The problem is that i create a 3.x Infosource too and i want use my generic datasource. But after replication i choose the false type (new datasource and not 3.x datasource) and now i can't assign my datasource to my 3.x infosource.I see the datasource in the sourcesystem-tree but not in the infosource-datasource-assigning-Popup.
How can i change the type of datasource from new datasource to 3.x datasource in BI 7.0???

MIGO Screen - Mvt Type 411 Q - change DEST material field as display

Hi Guru
We have client who would like to utilize movement type 411 Q (Transfer posting from project to own stock ) in MIGO screen.
The standard SAP MIGO screen does allow user to input material number at both "FROM" and "DEST" column.
User claimed that they wanted to block the input of material number field in DEST column (only allow display)
Could you please advise how to configure this display field which is only for movement type 411?
Please advise
Lyonie

Hi Lyonie
U can block the input material field in DEST column by doing the following changes.
Goto-SPRO-Materials Management-Inventory Management & Physical Inventory-Settings for Enjoy Transactions-Field Selection per Mvt Type
Select the field 411 UMMAT & Delete this entry.
Now check in MIGO transaction for 411 Movement type ,the input material number field in DEST column cannot be changed
Regards,'
Satpal Mujawar

I keep getting a message after start up saying "Completer wants to make changes. Type your password to allow this (which I have not done). Have screen shots. What do I do? Read this is malware. Running Yosemite OS X 10.10.1

Have mac book pro, OS X Yosemite 10.10.1. I get this after start up: "Completer wants to make changes. Type your password to allow this" (which I have not entered. When I cancel, there is some unknown "installer" icon on my desktop. If I move it to the trash, this all just starts over on the next time it is restarted. Have screenshots, but for some reason I can not attach to this message right now. Heard this is malware...HELP!

There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

MB11 552 Mvt Type Cost Center as Mandatory Field,Want to change to optional

Hi
In MB11 552 Mvt Type Cost Center as Mandatory Field, Requirement here is to change the filed to optional.
Whr are the settings?
Vijay

Hi,
Go to OMJJ...then enter MVT 552....Select line for MVT 552 then click on on left hand side you will see Field selection (from 201)/Batch search procedure...Double click on mvt 552...double clik on Additional account assignments---here make cost center as optional.
Cheers
Utsav

Automatic TO Creation and Confirm for the 321 Mvt type

Hello Experts,
Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
I have already activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe
2.TO item to be confirmed immediately
3.Propose confirmation
Table T333 -AUTTA
          T333-SQUIT &
          T333-VQUIT is activated.
Please let me know any other settings to be performed
Regards
Krishna

Hello Experts,
I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
I made the below settings
I have activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe   -"A"
2.TO item to be confirmed immediately - tick mark
3.Propose confirmation   - tick mark
Table T333 -AUTTA
T333-SQUIT &
T333-VQUIT is activated.
I have activated in OMKX as below
Table T321-TBFKZ Immediate TO Creation with "A"
T321-TAFKZ TR creation with "X"
After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
Thanks & Regards
Krishna
Edited by: Hariharan krishna on May 25, 2011 8:01 AM

Automatioc TO creation with mvt type 331(WM)

Dear Friends,
I am facing following WM issue, Kindly go through it and reply me with your valuable solution.
In my plant QM is active, so while receiving goods against any Purchase Order (MVT TYPE 101), all my stock goes to quality. After UD check, 99% material move to unrestrictd stock (321 mvt.type) and 1% used for quality (331 mvt. type).
For an example if I have received 1000 kg material (which initially goes to quality), after UD 995 kg material come to unrestricted stock and 5 kg used for quality check.
In my existing system for material document with mvt. type 321, one PCN is generated in the background, and using LT05 we make TO from PCN and confirm it.
But is it posible to create the TO and confirm from the PCN (Mvt. 321) in the backgroung itself, i mean to say that while my QM user is doing UD, material document with mvt 321, one PCN and TO will be generated and TO will be confirmd in the background itself.
I don't want to use LT05 separetely to make TO from PCN.
Please reply me soon.

Use RLAUTA11 SAP Report - Create transfer orders for posting change notices automatically.
Thanks & Regards,
Sudhakar

Mvt Type

Hi Friends,
I have some clarification in mvt type - 121
121-Sebsequent settlement of stock with subcontarct order.
I tried in GR with respect to Subcontacting P.O with Mvt type -121 for the reconsilation stock from Vendor...
System throws the error message- This Mvt type not done by manualiy...
Moreover i want to know, that reconsilation stock are normally collect by this Mvt type(wihout exice,57F4 challan)
From sas....

hi,
subsequent adjusmnet are done for adjusting the component consumption done in SC process.
when u craete the SC PO, u r paying the conversion charges for component conversion.
here u will do 101 for in coming material and auto matically system proposes consumption of component by 543.
after booking the consumption by 543, in later stage if u find there is a deviation in actual and planned, u can go fo sub sequent adjustment.
here 101 qttttty will remain same & u r using 121 mvt type incoming material where the qty will be zero during sub sequent adjustment, only component consumption has to change and it will be effectedby 543/544.
pl. check in ur dev or quality client
stocks are not collect by 542/545
consumption is done by 543/544
(receipt of sc by-product is 545)
Edited by: SURESH SHENOY on Jan 17, 2008 8:52 AM

Change Mvt type after GI.

Similar Messages

Maybe you are looking for