Change name of signal from the funktiongenerator?

Hello,
the output signal is "signal out". The received signal in DIAdem is "Untitled". Now I will change the name of the rectangle signal into "hall_signal".
Can anyone help me?

Hi,
I couldn't figure out the problem clearly.. but i suppose you are asking to change the signal name w.r.t different signals..
as function generator generates different types of signal so it's output is commonly written as "signal out". You can use the property node of graph or chart watever you are using as indicator to dynamically change the label of Y axis..
as per DIAdem is concern you can write in script to change the name as you want...
If you wanna ask something different then plz elaborate your requirement..
Regards
HS

Similar Messages

Older Airport express won't see the signal from the cable modem.

Older Airport express won't see the signal from the cable modem.
My macbook sees the AP express and I can stream music to it but no internet. If I plug the ethernet cable directly into the macbook I can see the internet

Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

How can I change my apple address from the US to the Philippines to make my credit card work?

How can I change my apple address from the US to the Philippines to make my credit card work?

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you will be located.
8. Tap "Done".

I'm trying to hookup my new AirPort Extreme with my net gear 7550 router/modem from Frontier. I'm not getting a wifi signal from the airport. What am I doing wrong?

What am I doing wrong?

I'm trying to use AirPort Untility to configure the old APExtreme to extend the network, but it won't let me.
"Extend" is only used if the two AirPort Extremes are connecting using wireless only.
"Create" is the correct setting to use since the AirPort Exremes are connecting using Ethernet.
Configure the second AirPort Extreme to create a wireless network using the exact same wireless network name, same security setttings and same wireless password as the "main" AirPort Extreme and make sure that you are choosing the Bridge Mode option for the second AirPort Extreme before clicking Update to save the settings.
When you do this, everything will act like one big wireless network and computers will automatically pick up a signal from the AirPort with the strongest signal based on their location.
This Apple document more details on this....which is called a Roaming Network.
Roaming network

I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.

I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.

Good day BenithaK,
Once you have changed your Apple ID, you need to set it up for use in the various systems such as iTunes, the App Store, etc so it can be used as intended. This article shows how to do that -
Apple ID: What to do after you change your Apple ID - Apple Support
To change your iTunes billing information for either Apple ID account, follow the directions in this article -
iTunes 12 for Mac: Manage your iTunes Store account
Thanks for using Apple Support Communities.
Safe computing,
Brett L

A month ago my iPhone was stolen, I turned on Activation Lock but it never came out BUT an hour ago somehow my apple ID was changed and someone removed from the account both iPhone and iPad and the iPad was also removely wiped. Can Apple help me somehow?

A month ago my iPhone was stolen, I turned on Activation Lock but it never came out BUT an hour ago somehow my apple ID was changed and someone removed from the account both my iPhone and iPad and the iPad was also remotely wiped. As soon as I saw it I recover the password and return the access to my iPad. But iPhone is not registered for my apple ID any longer. Can Apple help me somehow? I have all the documents and the iPhone box. Will they lock the iPhone and return me access to it. I'm sure it's been attached to another apple ID.
PS. the apple ID I'm using on the discussons is not the hacked one.

Try contacting the Apple account security team and ask: http://support.apple.com/kb/HT5699.

HT1918 I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

I changed my apple id from the one I used to originally sign up to iCloud and now cannot login to iCloud - do I need to change it back to access iCloud?

I changed my apple id from the one I used to originally sign up to iCloud and now cannot login to iCloud - do I need to change it back to the original apple id in order to access iCloud?

Gosh, this is full of great information and I need something a little bit deeper - and because I'm not a techy - can I explain...Apple ID changed a year ago from a work email to a personal email. No longer have access to original email..... New email and Apple ID worked flawlessly until today - every 3 seconds Sign in to iCloud pops up.. with the old work email. I enter the password - which is the same... and it says invalid.
I tried to delete the icloud, but you need the password and it says "find my phone" is on... i turn it off, and it's the old email... and the password again doesn't work, of course.
I am left stratching my head... I sync my phone and my correct, up to date email is in the Apple ID sections...
What am I doing wrong.. talk slow to me please, lol.

HT1766 HOW CAN I CHANGE MY BACKUP FOLDER FROM THE C DRIVE TO ANOTHER?????

HOW CAN I CHANGE MY BACKUP FOLDER FROM THE C DRIVE TO ANOTHER????? because my c drive in the windows computer gets filled and i need to back up my ipod to a portable hard disk.. bt i dont know how to do it.. plz help

you can't change the backup folder as far as I know, but you can choose to move backups. The information you need can be found in this article: http://support.apple.com/kb/ht4946
Where iTunes backups are stored on your computer
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.
Hope this helps
Regards,
Stijn

How to output the digital clock and synchronization signal from the NI USB-6211

Hello,
I need to connect the NI USB-6211 to control a digital to analog convertor chip (AD5541). However, this chip requires three input signals :1) Clock input, 2) Logic input or a synchronization signal and 3) Signal Serial Data input (CS, SCLK, DIN).
how to output the digital clock and the synchronization signal from the NI USB-6211?

Hi SaberSaber,
You should be able to use the counters to generate a pulse train that could be used for clock and synch purposes.
Hope this helps. Let us know if you have more questions.
Dave C.
Applications Engineer
National Instruments

I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

banannaphone,
Welcome to Apple Discussions.
Quit Safari, find the com.apple.Safari.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and let us know what happens.
;~)

TS1702 I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?

I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?

Sorry I'm so late responding; I've been away.
http://support.apple.com/kb/TS3694#error1611
The error means that your antivirus or firewall is blocking the update process.

I m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me. thanks ravi

i m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me.
thanks
ravi
<Email removed by Host>

sounds more like Bluetooth rather than moue, but w/o knowing w/o posting mac model type/year we... will... not... know... what you have
All computers are personal computers, a PC though is also "non-Apple" in common usage.
Mac also is platform and OS.
Very confused reading what you are trying to tell us.

HT4352 Why does my sony tv pick up my apple tv but my new LG has no signal from the HDMI input?

Why does my sony tv pick up my apple tv but my new LG has no signal from the HDMI input?

Hi midknightsurfer,
Welcome to the Sony Community!
Please try the following troubleshooting steps.
Check for a firmware update for your router.
Make sure the router is broadcasting the Service Set Identifier < SSID >.
Please try other device/s. Connect them to your network (wired/wireless) then test those units.
If my post answers your question, please mark it as "Accept as Solution"

Change de default camera from the lock screen in iOS 5

Is there a way to Change de default camera from the lock screen in iOS 5?
There are way better camera apps (camera+) than de default in the lock screen in iOS 5, is there a way to change this?

No.

Change name of signal from the funktionge​nerator?

Similar Messages

Maybe you are looking for

Change name of signal from the funktiongenerator?