Change Name option in 5.3 CUP

I am configuring a new 5.3 CUP and wonder if anyone is using the 'Change Name' request option.
And if so how does it work?
I tried to use it but it only asks for the old ID and I am not sure what it will even do.

Hi Clark,
How are you? 'Change Name' is a new feature which is part of AC 5.3 SP5. This feature provides the ability to change your user id to a new user ID based on password self service challenge response once you receive a new user authentication ID from your system administrator.
Here are the points to consider:
1) You will need to have password self service configured.
2) The new user ID must exist in the authentication system
3) The old user ID must exist in the target SAP system.
4) The target system, where the name change takes place cannot be the same as your authentication system.
5) This is available only for ABAP based systems.
I hope this helps.
Regards,
Alpesh

Similar Messages

CUP change name link

Hi All
In CUP 5.3, in End user Personalization, there should be a field as "Change Name Link". To my surprise, this field is available in DEV server but only this particular field is not available in our GRC PRD server (both the servers have identical configuration).
Could somebody share some possible reason/resolution for this discrepancy?
Thanks
Abhijeet

Hi Abhijeet,
I surprise why the 'CHANGE NAME LINK filed not showing.
But If you can login to oracle database and insert the following enrty then your problem will be resolved.
insert into sapsr3db.VT_AE_EU_PRSNL values ('CHANGE NAME LINK',1,'',0,1,0);
But SAP will not recommend this procedure. By inserting one row in the table will not harmful, You can go with it.
Regards,
Sudip.

Disable "Change Password" option in Comms Express

I need to disable/remove the Change Password option in Communications Express. I'm using patch level 122793-30. How do I do this? Are there any instructions out there for this? I see them for Convergence....which I have installed also but I have users who still use Comms Express.
Thanks in advance!

Found it myself.
Edit /var/opt/sun/comms/ce/uwc/common/UserPreferencesSettings.jsp and change:
<div class="Tab3"><a href="<%= getContextURI(request) %>/base/UserPreferencesPassword" class="TabLblNormal" title="<ja
to:getModelFieldValue escape="false" modelClass="com.sun.uwc.common.model.UWCResourceBundleModel" modelName="i18nModel" lookInSessio
n="true" name="uwc-common-options-tooltip-ChangePassword" defaultValue="Change Password"/>"><jato:getModelFieldValue escape="false"
modelClass="com.sun.uwc.common.model.UWCResourceBundleModel" modelName="i18nModel" lookInSession="true" name="uwc-common-options-Cha
ngePassword" defaultValue="Change Password"/></a></div>to:
<div class="Tab3"> </div>

Changing view options in Finder

When searching in Finder I have three columns, name, kind and last opened. How can I change these options, e.g. add size or last modified criteria?
Thanks

Ah yes - spotlight and search. I have not upgraded to Leopard for two reasons - and this is one of them - no options for viewing - name, kind and date modified are somewhat useless when you need to identify which is which in 20 identical looking files - as if they hired a Microsoft programmer.
Only thing to do is bang on at Apple to convince them to put this back...

HT3986 Using Boot Camp 4 and Windows 7. Try to change name of the C: drive and get the dialog "You will need to provide administrative permission to change the name". How do I change the C: drive name?

I tried to change name of the C: drive and get the dialog "You will need to provide administrative permission to change the name". How do I change the C: drive name?

Forgot to specify:
Im using an older Unibody Macbook (back when they were not all macbook pro's) 2008ish with Snow leopard 1.6.8
The thread you linked me to, Eric, shows the guy 'Niganit' with the eXACT SAME PROBLEM as me! He seems to have found out the problem but I dont see his resolve.
I just dont have the option to install windows 7 in any other form that a cd
a picture;

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

Can someone help me? How do I change the option to pick where or what program I want to open a file after I've downloaded it? I tried to look for an option for this and can't find it anywhere.

For example I download a file and I click on it and there will sometimes be a window that opens saying what program I want to open the file with? And then it'll also have a check box saying if I want to use this program for all files I download. I can't change it when I download the file because that one file I keep downloading keeps crashing my Firefox and I have to force quit. It's really getting on my nerves. It's an online statement I'm trying to view and I want to get rid of that problem!! Is there anyway to change that option without going to that download page?

I would recommend going into device manager on your PC and making sure that you have correctly installed the IR dongle. Also what version of hotsync manager are you currently using?
Post relates to: Treo 800w (Sprint)

User cannot change password option is automatically getting unchecked while giving domain admin rights

user cannot change password option is automatically getting unchecked while giving domain admin rights

Greetings!
"Domain Admins" falls into the category of protected groups and it is included in ADminSDHolder process. It is normal and was designed in order to prevent the modification to these privileged groups. More information on the link below:
AdminSDHolder, Protected Groups and SDPROP
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts if changes on all computers.

How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts it changes on all computers. I would like to change icon and name for each computer.

you would need to setup a VPN and tunnel into your office.
FYI..the default ports are 3283 and 5900.

Preview on [device name] option not available

Preview on [device name] option not available on Folio Overlays

In v20 its available in the Folio Builder panel (iPad only, I think). You have to plug to your Mac to the iPad with the USB cable and starting the Adobe Content Viewer app on the iPad first. Otherwise check iTunes on your Mac if your iPad is listed under "Devices".
Are you using InDesign CS5.5 or InDesign CS6?
You have to be up to date with the Overlay Creator panel to v20 as well. Check for that.
Recently I had no chance with InDesign CS5 and the v20 tools installed on a Mac with OSX 10.5.8.
Uwe

When i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync options,how can i change that option,can any one help me.........?

when i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync options,how can i change that option,can any one help me.........?

I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback.

Converting Video to iPod, can you change name of file

When you convert Video to iPod format, can you change name of the new file or put some "marker" so one can tell which is the orginal and which is the new file?
Currently it is difficult to tell between the orignal and the new file.
thanks in advance
Rohit

You'd probably be better off doing this sort of editing in iTunes, and letting it move the files appropriately.
Go to the preferences, Advanced tab, and check the box to 'Keep iTune Music folder organized'. Then any changes you make to song names or other info (within iTunes) will automatically be applied.

RE: (forte-users) Changing replication options in Fscript? -Tric k

There was one attribute of a service object you couldn't change in fscript..
I think it was whether the service was replicated at all or not (not the
same as setting rep count to 1!).
As Clint would say, "improvise.."
We exported the project containing the service object and snipped out the
part pertaining to the service object in to a little export file.
Then in an fscript script you can branch/checkout the service object and
import the snipped out export file to change the replicated yes/no flag.
Then do whatever other fscript commands make sense.. We tended to leave the
system baseline with the "true" replication flags and let developers run
this little script (only branching the services) to de-replicate all the
replicated services prior to trying to run from their workspace, etc.
Worked like a charm.
-Greg
-----Original Message-----
From: Taras Katkov
To: [email protected]
Sent: 12/1/99 2:57 PM
Subject: Re: (forte-users) Changing replication options in Fscript?
"setappcompcompiled", "setPARTrepcount" can be used in fscript during
application build.
I mean PERIOD!
Taras Katkov
f.e.
FindAppComp AppNAme_PartXX
SetAppCompCompiled MyNode 1
SetPartRepCount MyNode YY
SetPartArgs MyNode \"Whatever\"
SetPartThreadPkg MyNode DCE
commit
[email protected] wrote:
>
Yes through escript one can achieve changing the properties but onecannot
do it when one is partitioning the app where the router gets createdand
assigned ( which is fscript) and the single threadedness of thepartition
takes effect ( for loadbalancing ) except from the partitioningworkshop
(GUI) itself.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 3:39 PM
To: [email protected]; [email protected];
[email protected]
Subject: RE: (forte-users) Changing replication options in Fscript?
Yes you can do it, but you actually do it in EScript not FScript lookfor
the following types of command "assignappcomp", "unassignappcomp",
"setappcompcompiled", "setrepcount", "findagent", "findsubagent",
"findparent" etc.. So start with your EScript manual.
Happy scripting.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 1:36 PM
To: [email protected]; [email protected]
Subject: RE: (forte-users) Changing replication options in Fscript?
no it is not. One can compiling properties but not replicationproperties
through Fscript.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 3:24 PM
To: [email protected]
Subject: (forte-users) Changing replication options in Fscript?
Before making a distribution, we modify replication options on some ofour
service objects from within the Partition Workshop (to get rid of the
router partition on some of our applications). Does anyone know ifit is
possible to do this in Fscript? Thanks for your help.
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a
new
email the word: 'Unsubscribe' to: [email protected]

You can set the the number of replicas through fscript BUT the service
object in that partition has to be marked for LOADBALANCE. I didn't find a
fscript command to do that (that was what mnasser was trying to tell you).
But you can get around it by exporting the plan that has the service object
and look for the string LoadBalance = FALSE, then change it to LoadBalance =
TRUE. Import back the plan and you should be fine.
Norocel Popa
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 8:28 PM
To: [email protected]; [email protected]
Subject: RE: (forte-users) Changing replication options in Fscript? -
Tric k
There was one attribute of a service object you couldn't change in fscript..
I think it was whether the service was replicated at all or not (not the
same as setting rep count to 1!).
As Clint would say, "improvise.."
We exported the project containing the service object and snipped out the
part pertaining to the service object in to a little export file.
Then in an fscript script you can branch/checkout the service object and
import the snipped out export file to change the replicated yes/no flag.
Then do whatever other fscript commands make sense.. We tended to leave the
system baseline with the "true" replication flags and let developers run
this little script (only branching the services) to de-replicate all the
replicated services prior to trying to run from their workspace, etc.
Worked like a charm.
-Greg
-----Original Message-----
From: Taras Katkov
To: [email protected]
Sent: 12/1/99 2:57 PM
Subject: Re: (forte-users) Changing replication options in Fscript?
"setappcompcompiled", "setPARTrepcount" can be used in fscript during
application build.
I mean PERIOD!
Taras Katkov
f.e.
FindAppComp AppNAme_PartXX
SetAppCompCompiled MyNode 1
SetPartRepCount MyNode YY
SetPartArgs MyNode \"Whatever\"
SetPartThreadPkg MyNode DCE
commit
[email protected] wrote:
>
Yes through escript one can achieve changing the properties but onecannot
do it when one is partitioning the app where the router gets createdand
assigned ( which is fscript) and the single threadedness of thepartition
takes effect ( for loadbalancing ) except from the partitioningworkshop
(GUI) itself.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 3:39 PM
To: [email protected]; [email protected];
[email protected]
Subject: RE: (forte-users) Changing replication options in Fscript?
Yes you can do it, but you actually do it in EScript not FScript lookfor
the following types of command "assignappcomp", "unassignappcomp",
"setappcompcompiled", "setrepcount", "findagent", "findsubagent",
"findparent" etc.. So start with your EScript manual.
Happy scripting.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 1:36 PM
To: [email protected]; [email protected]
Subject: RE: (forte-users) Changing replication options in Fscript?
no it is not. One can compiling properties but not replicationproperties
through Fscript.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 3:24 PM
To: [email protected]
Subject: (forte-users) Changing replication options in Fscript?
Before making a distribution, we modify replication options on some ofour
service objects from within the Partition Workshop (to get rid of the
router partition on some of our applications). Does anyone know ifit is
possible to do this in Fscript? Thanks for your help.
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a
new
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

RE: 1) Changing name and IP address of an AIX 4.2 Server 2)Using NAT

Daniel,
you (normaly) just have to :
1) edit the $FORTE_ROOT/fortedef.sh fileand change the value of variable
FORTE_NS_ADDRESS
2) shutdown and restart forte environment
3) put the new values in the control panel of the client and run !
It worked on our site with the same configuration (Aix 4.2)
Good luck
De : Daniel[SMTP:[email protected]]
Répondre à : Daniel
Date : vendredi 18 juin 1999 13:08
A : [email protected]
Cc : Jose Ignacio
Objet : 1) Changing name and IP address of an AIX 4.2 Server 2)
Using NAT to reach forte
Hello Forte Users :
    I have 2 questions to make:
    1)
    I've installed a Forte Server Central Node (Release 3.0.F.2) in an
IBM RS/6000 with OS AIX 4.2
    (The name of the server is Name_1 and the IP address is
125.125.50.50 with mask 255.255.255.0)
    Nowadays we had to change the name and IP address of this server
lets say to Name_2 and 125.125.60.60 with mask 255.255.255.0.
    After that we try to find any reference to old name and IP address
in the forte directory and all of its subdirectories changing them to
the new ones.
    After these changes we found than forte could'nt start the nodemgr
server.
    We have too many reasons to avoid installing FORTE again.
    Does anybody know if I have to change anything more to make
nodemgr server work.
    2)
    The second question is about NAT (Network Address Translation).
    To reach a Forte Server Central Node from a Forte Client we have
to pass through a Firewall and NAT.
    We are researching and at this moment we can not reach the server
from the client, has anybody any suggestion to correctly configure
Forte (Client and Server) to use NAT between them.
    If anyone could help me I would be very pleased.
    Thank you very much in advance,
    Daniel GonzáLucas (EAM Sistemas Informáticos SL, Spain,
e-mail: [email protected])
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

>> 15 Mins is not enough for completely the replication.
>> use repadmin /syncall /aEpd   - for force replication.
>> Wait 3 hrs minimum.
Regards,
Biswajit
MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
Blog:
Script Gallary:
LinkedIn:
Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

How can I change view options for ALL playlists?

How can I change view options for ALL playlists? With one single click or trick?
I have a lot playlists and don't want to change every single one of them separatly.
Thanks for your help. (I use Windows 7)

There's no FAST way I know of, which is what I think you mean.
Only the painful SLOW way of one-by-one.
You could make a new playlist from the main library after you've set the columns up as you like.
Go to an existing playlist that doesn't have the columns you want, and select all.
RIght-click > Add to Playlist and send them to the new playlist.
That's still one-by-one and only works with static playlists, not smart ones.

Change Name option in 5.3 CUP

Similar Messages

Maybe you are looking for