Change NETPR in TX. ME21N while saving

Hi to all,
I need to change the netpr of all items in tx. ME21N but while the document is saving, 'cause the user doesn't want the new calculated netpr in display.
I've been trying to use EXIT_SAPMM06E* but i can't make them work, specially EXIT_SAPMM06E_013 to change it.
Please some help.
Thanks.

The thing is that if I use the BADI, the change at the netpr field will display on the tx.
The user doesn't want that.
Just wanna save the new calculated netpr.
thanks
Ps.I've tried and it can't be done... i tried with the BADI, UE, Enhacement with no luck. thanks anyway
Edited by: Fiorella Chavez Valdivia on Feb 18, 2009 4:20 PM

Similar Messages

Exit for ME21n while saving

Hi,
Let me know if there is any exit while saving ME21n tran.
Requirement is while while saving the PO,a pop-up information message should be displayed depending on certain purchase organization validation.
Do let me know.
Regards,
SP

Hi,
Below is the enhancement: MM06E005 (Check in SMOD) and in that enhancement, there is an customer exit: EXIT_SAPMM06E_012 where in you can perform the validations for the purchasing document.
Since your requirement is at header data(Purch Org) the same is available in I_EKKO parameter of the customer exit EXIT_SAPMM06E_012.
Implement this exit and throw an information/error message upon validation
Hope this helps
regards
Shiva

Changing the default file name while saving the PDF interactive form

Hi All,
I am generating an Interactive PDF form using webdynpro, but when I try to save the PDF to my local machine the default file name comes as "<b>unknown.pdf</b>" so I have to manually go and enter the name before saving it.
Is there any way to change this default name so that I don't have to manually edit the file name each time when I want to save the generated PDF interactive form?
Please reply soon.
Thanks in advance!

I am running into the same issue. Setting the desname parameter (e.g. desname=temp.pdf) doesn't have any effect. Has anyone found a solution to this?
Thanks,
Brian

Exit/ BAdi to change delivery priority in ME21n while creating STO

Hi,
I'm trying to create STO through transaction ME21N. After entering the header data and material no. when i press enter i'm able to see the item level data. Here in item details, under tab 'Shipping' there is a field 'Delivery priority'. I want to influence this field. Is there any user exit / BAdi available that can be used to modify this field when i press enter after entering the header data and material??( i.e. Before Save).
I have tried creating implementation in BAdi 'ME_PROCESS_PO_CUST'. But during testing control was not stopping at the break-point.
Please suggest me solution to this problem.

Hi
Create an Implementation ME_PROCESS_PO_CUST (like   Z_ME_PROCESS_PO_CUST) and check the method
IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM     Processing of Item Data
and keep a break-point   u have SET_SHIPPING_DATA and GET_SHIPPING_DATA Methods
INterface Name :::IF_PURCHASE_ORDER_ITEM_MM
EKPV--LPRIO for Delivery Priority
surya

To set an error while saving the order when the item categor changed in CRM

Hello SAP Gurus,
As per our current system set up, whenever the order created in CRM once replicated to ERP should not change the item category in CRM .If the item category is changed( allows the system) and saved, it gives an error as u201CItem category should not be changedu201D. We have been encountering this type of issue since long back
To avoid this type of issue, an error should through while saving the order when the user changes the item category in CRM.
Can someone help me to achieve this.
Thanks in advance.
Cheers
Sreedhar

Sreedhar,
Can't you control it by Item Category determination?
JD

Error in sharepoint 2010 designer while saving:"Content in the embedded form may be changed by the the server to remove unsafe content.Do you want to reload your page to see the results of the save? "

Hi,
I am doing development in sharepoint 2010 and facing this very weird problem.
If I create a site page with the sharepoint look and feel for that site and try to save the site page,i am getting this error:**"Content in the embedded form may be changed by the the server to remove unsafe content.Do you want to reload your page to see
the results of the save? "** and when i say reload,the server removes some parts of my page, e.g onclick event of html,asp buttons.
This error just comes for any sharepoint site page,e.g i took a copy of 'How To Read Library' page just edited the text part of taht page,and when i try to save this error again comes up.
However,if i create a simple aspx page with only htmltags like head body,then thr is no problem ,everything works great. But sharepoint look and feel pages are giving troubles while saving.
has anybody seen this earlier,what could be the reason for this?
Thanks

I think the excerpt and link below is the why, but the page talks about server code and not javascript. I guessing that this is why blank pages work, but not wiki pages. Can anyone verify this?
The following are general rules for using server-side code on a site page.
If the page is uncustomized, server-side code is supported on the page.
If the page is customized, server-side code does not run, and the page does not render. This includes the code-behind for the page itself.
http://msdn.microsoft.com/en-us/library/office/aa979592(v=office.14).aspx

Changing adobe forms name while saving

hi,
i have made an application in which i am generating pdf form but while saving a default name 'f' is appearing which i need to change. I am unable to change pdf form name.
Plz help.
thanks

I have no solution for you but this forum is related to FPM discussions. i am not sure you posted in a right forum.
requesting moderator to (re)place this to right forum.

Wanted to change the Exchange rate while saving the PO

Hi,
I have a requirement that i have to change the value of Exchange rate while saving the PO.
Even i checked with more BADI's. but i am not able to update the new value.
Can you tell me any specific user exits available for this.
Thanks in Advance,
Best Regards,
Prabu

Solved

Changes in the material, the order should be blocked while saving the order

Hi,
A sales order is already there and delivery is not yet done. The requirement is, If I make any changes in the material, the order should be blocked while saving the order.
Is there any indicators or some fields which tells material is changed in the order. How this can be realised.
I thought of table CDPOS, but this can be used only after Order is saved.
Please provide your inputs.

Use user-exit MV45AFZZ, form-routine USEREXIT_SAVE_DOCUMENT_PREPARE. Compare the values in XVBAP-MATNR(New Values) and YVBAP-MATNR(Old values). If the values are different, update the value VBAK-LIFSK to block the order.

Issues while saving urgent change

We have configured Charm on solution manager 7.1 sp08. Have successfully created urgent change document but while saving the urgent change we are gettin below error:
ERROR: The ABAP/4 Open SQL array insert results in duplicate database records. records in the data base. (termination: RABAX_STATE)
Short dump highlights are as follows:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "COM_PARTNER_UPDATE_DU" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
We tried implementing OSS notes as well but of no use.
Will creating a new project help in this case. Kinldy reply.
Thanks in advance
Anshu

Adding more info related to implementation of note 2015657, following notes were irrelevant - 1651404, 1689809. rest of the two notes -1837743 and 1881656 were completely implemented.
Hope this clarifies the situation.
Let me know if any other note to be implemented...or creating a new project be helpful.
Thanks & Regards
Anshu

Process order date changes automatically while saving the order

Hi All,
While creating a process order in COR1, system proposes the scheduled start date and finish date as current date (today's date), but while saving the order, the dates automatically changes to previous day's date (one day before). Can any one help in what config change needs to stop this auatomatic date change..? Thanks in advance.
Regards,
DS.

Dear,
I would suggest you to carrout Master reciepe scheduling and update the Inhouse production time to the material master, this would enable the basic start dates and sheduled start dates to be same.
If you dont want to carrout scheduling of order, then in OPUZ transaction for the plant/order type combination deactivate the check box for automatic scheduling.
Regards,
Prasobh

Service order IW32 - change header data while saving with UE

Hello
I have the following problem. I need to clear while saving
order in IW31/2 one single fields this is CAUFVD-ABGSL
but I cannot find any user exist that could allow me to CHANGE this field I tryied to use :
IWO10009 IH-Auftrag: Kundenprüfung zum Zeitpunkt 'Sichern'
but it has only CAUFVD as importing parameter *" IMPORTING
*"     VALUE(CAUFVD_IMP) LIKE CAUFVD STRUCTURE CAUFVD
while I need to change one field while saving order
Did somebody dealt with this problem
I will be really gratefull for help
Best regards
Bogumila

Hi,
I've had a request for one of my customers to automatically change this field as well.
Apparently, it was possible to change the CAUFVD structure, but it wasn't updating the database table AUFK.
First of all, I wrote a new function module to update it straight in the AUFK database table, using the order ID and the provided RA key. This because using FM BAPI_ALM_ORDER_MAINTAIN threw an error.
FUNCTION Z_0PM_CHANGE_RA_KEY.
*"*"Update Function Module:
*"*"Local Interface:
*" IMPORTING
*"     VALUE(IV_AUFNR) TYPE AUFNR
*"     VALUE(IV_RA_KEY) TYPE ABGR_SCHL
     UPDATE aufk SET abgsl = iv_ra_key WHERE aufnr = iv_aufnr.
ENDFUNCTION.
Then in user exit PPCO0001 - FM EXIT_SAPLCOBT_001 I'm calling this in an update task, to avoid any current object locks while saving. It's working both in transactions IW31 and IW32:
SELECT SINGLE absl FROM z0pmrakey
        INTO lv_ra_key
        WHERE auart = lv_auart_rep
          AND ilart = lv_ilart_rep
          AND eqtyp = lv_eqtyp_rep.
      CALL FUNCTION 'Z_0PM_CHANGE_RA_KEY' IN UPDATE TASK
        EXPORTING
          iv_aufnr       = lv_aufnr
          iv_ra_key      = lv_ra_key.
In case you have any questions, please ask.
Kind regards,
Joris

An error has occurred while saving your changes to the server. Network failure.

When I'm importing my articles I get this message. "An error has occurred while saving your changes to the server.
Network failure. Do you want to try again?"
Any Help would be great.

I had several fails yesterday as well. Not sure what the issue was. Haven't tried today, but I know there were 1 or 2 other people posting the same issue.

Error while saving after changing the date of a parked invoice document in MIR7

DUPREC:POS&INCOMINGINVOICE&(Invoice Number)(Fiscal Year)
Message no. CD328

Hi,
Hope you are getting the dump Please check this note 1687903 - MIR4: Dump while saving parked invoice
also check the dump at ST21 for the ABAP statement whare it is getting an issue and rectify the same .
Regards,

Error while saving in ME21n

Hi
I have created Stock transfer Order with Document type UB. I filled in all the necessary details. While Saving the Order I am getting the following error message : Material not subj. to inventory mgmt. in plant ZS10 (Pl. check your input).
I would like to know how to rectify this error
Points will be awarded.
Thanks and Regards.
Subhash

Dear,
Meantime,
Please check, In the Material master check in purchasing view for plant specific material status if it is defined as blocked for inventory management. then possible you will get this error.
And check plant/storage location stock view shall be extended for your related material master record.
Go to Go into IMG > Logistics general > material master > Basic Settings > material type > Define Attributes of Material Types, Select your material type and click Quantity/Value update.
Regards,
Syed Hussain.

Change NETPR in TX. ME21N while saving

Similar Messages

Maybe you are looking for