Change network parameter using ndd permenantly

Hi all,
Need to set the "udp_xmit_hiwat" and "udp_recv_hiwat" to 65536 as the default is only 8192 this is required by the Oracle RAC, using the "ndd" command will change the value but upon reboot the changes are lost. I can change using the "rc" scripts, but is there another command that will change the values permenantly?
By the way, the Oracle manual states that setting the following values in the /etc/system :
set udp:udp_xmit_hiwat=65536
set udp:udp_recv_hiwat=65536
will change the values permenantly, however, when doing so, I get an error messgaes during the boot complaining that no such settings are allowed in the /etc/system, any ideas?

Similar Messages

OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?

OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?

Just want to confirm that I am also having this issue, The connection is fine, and it is in fact charging (@ 100%)
Everything Rick has said is like an echo to what is happening to me.
I have tried re-installing iTunes, and restarting the Bonjour service, sadly there is no change.
earlier before i updated iTunes it recognised my iPod but said that I had to update iTunes in order for it to work.
So i updated iTunes but now it's not even showing the device anywhere.
In case this helps:
OS: Windows 8.1
iTunes version: 11.3.1.8
Device: 5th generation iPod touch 16GB with ios 7

Can you please tell me how can i change the parameter of Applet using Aspec

Respect Members
Can we apply Aspectwerkz on Applet? In our project we have to
change the method parameters before its execution(Around Advice) , can we do this in applet using Aspectwerkz?
Can you please tell me how can i change the parameter of Applet using Aspectwerkz or AspectJ ?
I did it by for Java Application using the AspectJ And Aspectwerkz But not able to do for Applet.
For Applet I Am setting the parameter in JAVA plug in for Aspectwerkz e.g. -Xdebug -Xrunaspectwerkz -Xbootclasspath & path for xml file in which pointcut is defined.
If you any Friend working on it or any author who might be helpfull for me please Forward this mail to him/her
THANKs in Advance
[email protected]

hello rodale, what you're seeing is probably a side effect of firefox not being able to save certain preferences into its profile folder.
go to ''firefox > help > troubleshooting information'', click on ''profile folder/show folder'' and close all firefox windows afterwards. a windows explorer window should open up - in there delete the file named '''user.js'''.
in case this didn't solve the issue yet please also refer to [[How to fix preferences that won't save]].

How to change COMPATIBLE parameter while creating the database using DBCA

I have installed 10.2.01.0 on centos 4.7
Now i want to create database with COMAPTIBLE parameter 9.2.0.1
I m trying to create database through DBCA, changed the initialization parameter COMAPTIBLE to 9.2.0.1.
But gives me error
ORA-19583: conversation termintated to error
ORA-19870: error reading backup peice /opt/oracle/assistants/dbca/templates/Seed_Database.dfb
ORA-00600: internal error code,arguments: [krbrckhr_compressed],[opt/oracle/assistants/dbca/templates/Seed_Database.dfb],[29],[30],[11420],[],[],[]
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 5149
ORA-06512: at line 16
if i dont change the value of COMPATIBLE parameter then its running perfactly...
But i have to set compatible parameter as 9.2.0.1....
Can anybody tell me how to create database using 10g R2- 10.2.0.1.0 with compatible parameter 9.2.0.1

Thank you for your response.
I have tried that opting.
After creating the database with COMAPTIBLE parameter 10.2.0.1.0 changed that parameter in init.ora file to 9.2.0 and start the database.
But at that time getting
ORA-00201: contorl file version 10.2.01.0 incompatible with ORACLE version 9.2.0.0
ORA-00202: control file '/opt/oracle/oradata/ORCL/control01.ctl'

How to handle SQL connection if password Active directory always change? (Connection using Active directory via network SQL 2012 )

I have 3 server (Web server, database sql 2012 server and Active directory). I'm using sqlsvr version 3.0, PHP version 5.3 ,IIS version 7 and windows server 2008.
Right now my php connection to SQL 2012 using AD id, so How to handle if password on active directory change?

Solved : Using Kaberos

What is the maximum size of the application to download to iPad via GSM. Is it 20 Mb? Is it possible to change this parameter?

What is the maximum size of application to download to iPad via GSM. Is it 20 Mb? Does exist any possibility to change this parameter? In the towm where I live there is lack of wifi and the only possibiluty to download something from Apple Store is to use GSM/3G.

It has partly to do with the carrier. From what I've summized from reviews & feedback online is since Apple iPhone was the most advanced phone on the market when it was initially released the carriers were concerned about using up bandwidth with the apps & movie downloads so a limit was intially set for 10mb max on 3G connection. Later apple raised the limit, against the carrier's advice, to 20mb max.
The interesting part is the limitation doesn't exist on Android phone when they also have large apps & movies which are available for download & they use the same networks the iPhone uses! So why are the iPhone users still limited to the amount they can download at once while the Android users are not. They pay the same for thier data plans, if not less in some cases, that iPhone users do!

Voicemail issue since changing network (UK)

Hi,
I've recently changed networks from o2 to Three. I had my iPhone unlocked from o2 and started using my SIM 600 card that i purchased in a Three store.
Initially i had no issue until i was left a voicemail. I soon realised that Three don't offer the visual voicemail facility, however this isn't the issue. On checking my voicemail and deleting it; i've now found that i constantly have the red dot icon (blank) over the voicemail tab on my "phone" app.
I've checked my voicemails and have the reply fromt he voicemail stating "you have no new messages." There is no facility to check to see if there are saved messages so i can delete them, so i presume i have none. I receive the standard text message stating i have voicemail when i reboot the phone, even though i have no voicemail on checking! I've also found that when i check, my iPhone keeps checking for email and also for App updates when i have Email set to Manual (not pushed or fetched) and i certainly ain't hit the App Store!
I've spoken to Three who said that there isn't an issue with the voicemail settings as its working however the technical customer advisor asked me to wait whilst he checked to see if there was anything else he could do to help me. On coming back he said that the tech department are investigating a potential issue to identify whether its a fault on the iPhone side or if its a fault on the Three side. My iPhone was working perfectly well with o2 and on removing the Three sim, and replacing it with another sim it worked perfectly well so i assume its Three's issue which is what i told him.
I've tried a soft reset, i've tried a full restore - setting it up as a new phone or with a backup, still remains. I've tried calling and leaving a voicemail to see if i can flush the system, but nothing. My colleague at work is on Three with the same iPhone, same iOS update etc etc and she doesn't have the issue so I'm bemused.
I read somewhere it could have something to do with the micro sim being an old and outdated sim - could this be the case?
I'm looking for people's help as i'm heading to the Three store on Saturday to request a new micro sim so wanting some bullets to fire when i get there...
If anyone can help, i'd be sincerely grateful!
Cheers
Paul

Just as an update before i close the topic off...
Went into the Three store today and explained the situation to the same guy who sorted the contract out for me. He said he'd never come across it before and couldn't understand why it was happening.
I chanced my arm a little and although it was more or less the whole truth i'd bent the truth a little about the customer services number who didn't have a clue anyway and said that i'd done a bit digging on the internet and mentioned about the micro sim being outdated or something similar. He then offered to try it to sort the issue out, gave me a new micro sim and transferred my details over...got home and swapped the micro sims over.
Voila, icon vanished and no issues thus far...on looking a little closer on the packaging that the micro sim comes with, the initial one i had was from Aug 2011, the newer one was from October 2011 so it may be possible that the post i'd found from googling the issue was correct.
If the issue arises again i'll add to the topic, however so far so good - so i hope that others who may have this issue see this and try the above!
Cheers

Unable print scheduled report on network printer using BOEXI 3.0

Hi,
I'm unable to print a scheduled report on network printer using BOE XI 3.0. I get the following error
Error Message: Error in File ~ce6a054be1a25b52.rpt: Request cancelled by the user. ]
Has anyone encountered this kind of problem and know what the solution is?
Thanks,

Hey Falk,
Thanks for the response.
I can print on a network printer after I changed 'Crystal Reports Job Server' to run under a user account that has privileges to access the printer.
To answer your questions regarding the problem:
>Can you schedule the report successfully ?
>>Yes I was able to schedule the report successfully
>Can you print the report successfully?
>>NO the scheduled task would fail with the error message as posted above.
Thanks,

Safari of my Macbook (on WiFi) suddenly fails to connect to the Internet. A popup window message says another device on the network is using my computer's IP address.

But then there was still no Internet access even after I have disconnected all other home computers (a total of four including the Macbook and one iMac desktop. For simplicity, I shall categorically called them Mac hereafter unless otherwise specified. The Macs are operating on WiFi.).
The window message recommends changing the IP of either the Macs or the other device. The latter of course does not apply because I don't think the other device is one of my computers.
My questions:
(1) Why did that happen suddenly since the Mac and other computers on the WiFi was working fine in the morning (as well as days before) and then all of a sudden an unknown device is using my computer's IP? As far as I (we) can remember, we did not do any thing unusual this morning nor had we downloaded any special programs.
(2) How do I change the IP since it requires Internet acess to do it and since I can't access the Internet on the Mac?
(3) I am almost sure the problem is not caused by the Internet service because when I connected the Ethernet cable from the DSL modem to an old Windows PC, I got Internet via Internet Explorer. [I am actually sending out this message via IE on my PC.] However, when I cennected the Ethernet line from the modem to a WiFi router (Airport Extreme) and then connect the router and the old PC, I did not get Internet on either the Mac nor the PC. Similarly, there was no Internet on both Mac and PC If I connect Ethernet only between the modem and the router but not between PC and router. So, the question is whether a third unknown party has gotten hold of my Mac IP address and is trying to break into the Mac? Can it steal my personal info?
(4) How can I repair the Mac now and prevent future recurrences? Is changing the IP address the way to do it? (But like I said before I had tried but could not change the IP because I did not have Internet access on the Mac. Is there an alternative method?)
(5) I wonder if a computer's IP address remains constant if you don't change it. The reason I am asking this question is because the aforesaid window message on the Macbook--not sure about the iMac--shows a different IP address--a few numerical digits were changed--almost every time it pops up following every failure trial of mine to access the Internet. Was the Macbook trying to change the IP for me or was there some thing not right?

Re: Another device on the network is using your computer's IP address.
This message/problem was occuring intermittently for me in a household with two MacBooks accessing one Airport extreme. Rebooting the modem and router would only temporarily fix the issue for me, so I spoke with a friend who works for Apple and it seems that the Airport Extreme settings were at the root of our particular issue.
The router(Airport Extreme) recieves only one IP address from the modem and in order to allow it to share the IP address with two computers at once, the solution in my case was through:
Applications>Utilities>Airport Utility>Manual Setup>Internet
under Internet Connection- Select "share a public IP address"
under NAT, check the box for "enable NAT Port Mapping Protocol"
(this will allow the sharing of one public IP address with multiple devices)
if this is a new setting, then click "Update" and the Airport Extreme should reboot itself with new settings applied.
When all else is working properly, this is a satisfactory solution in my case.

How change NLS_NUMERIC_CHARACTERS parameter for load external table

Hi,
I use this version:
OWB 11gR2
Database 11gR2
Parameter NLS_NUMERIC_CHARACTERS Database ., Instance ,.
When I created database with wizard and in this moment I don't set spanish language, later I changed this parameters in instance parameters.
Now I want load data from a file to external table, but I've an error when I try load data with decimal point.
why does it use the database parameter instead of instance parameter?
Is possible to change this parameter?
Cheers
Marisol

At this moment , this is not possible . You can see metalink note ID 268906.1.
It says:
Currently, external tables always use the setting of NLS_NUMERIC_CHARACTERS
+at the database level.+
Cheers
Marisol

How to change Network Settings on iPhone OS 3.1.3 on my iPhone 3G?

I'm using the iPhone 3G locked with Bharti Airtel in India. Airtel, for a brief time was authorized to unlock the iPhone 3G after the completion of contract period of a year but, now it doesn't.
Airtel has three network settings but I'm unable to change the settings. I need to change it to use unlimited data plan. Is there any official way to change it? and if not, will it possible to change the settings after I unofficially unlock it? Please suggest.
P.S. I'm running the latest iPhone OS 3.1.3

sangeet.b wrote:
I'm using the iPhone 3G locked with Bharti Airtel in India. Airtel, for a brief time was authorized to unlock the iPhone 3G after the completion of contract period of a year but, now it doesn't.
Airtel has three network settings but I'm unable to change the settings. I need to change it to use unlimited data plan. Is there any official way to change it?
The ability to change the APN settings on the iPhone depends on the carrier file. Basically the carrier has told Apple if they want the settings to be enabled or not. In the case of the iPhone in Canada all carriers do not allow for the APN settings to be changed, and it would appear that Airtel is the same.
If the iPhone is being used properly with the carrier that the iPhone is locked to there should be no reason to change the APN settings.
sangeet.b wrote:
will it possible to change the settings after I unofficially unlock it? Please suggest.
P.S. I'm running the latest iPhone OS 3.1.3
As far as unlocking the iPhone goes the only way it to see if your carrier will unlock it for you. According to Apple you are correct in saying that Airtel does not offer unlocking, but you can always call them to double check.
http://support.apple.com/kb/HT1937
Hacking the iPhone is not recommended, and can not be discussed here on this forum. You can search Google, but if you are running 3.1.3 hacking your iPhone to unlock it might not even be an option.
http://support.apple.com/kb/HT3743

HT1766 how do i change network providers on my iphone

how do i change networks providers on my iphone

You would have to ask the carrier your currently on to unlock your phone -if they provide that service, then you can use another carrier.

HT1338 I cannot access my iphoto application on my imac as it says I have made changes in Iphoto using a newer version. We have recently purchased a Macbook Air and this has Lion (as opposed to leopard on the iMac) and we are sharing photos between the 2?

I cannot access my iphoto application on my imac as it says I have made changes in Iphoto using a newer version. We have recently purchased a Macbook Air and this has Lion (as opposed to leopard on the iMac) and we are sharing photos between the 2. I am awaiting the upgrade discs for snow leopard and then to Lion for the iMac but is there a way to access my photos until this arrives?

Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Is it possible to change network adapter priority in windows 7 by command line?

Ik need to change my users network adapters so that the LAN network adaperts have a higher priority than the WLAN adapters.
I would prefer to do it trouhg a command line so that is can distrubute it with SSCM.
Can annybody help me??

I've found the following Blog article for you:
http://win7settings.blogspot.be/2012/04/how-to-set-network-adapter-priorities.html
From the Command Line
Unfortunately there is no out-of-the-box command line interface for these Advanced settings described above. Luckily, there are two ways to set the priorities from the command line. The more difficult way is to set metrics for each network adapter (using netsh). The much easier way (easier to manage too) is to use nvspbind made by Microsoft. If you set the priorities using nvspbind, the effects can also be seen in the Advanced settings in ncpa.cpl. Here is how you use nvspbind:
Go to http://archive.msdn.microsoft.com/nvspbind and download nvspbind. Extract the nvspbind.exe and copy it to the target machine and run:
nvspbind.exe /++ "Wireless Network Connection" ms_tcpip
nvspbind.exe /++ "Wireless Network Connection" ms_tcpip6
nvspbind.exe /++ "Local Area Connection" ms_tcpip
nvspbind.exe /++ "Local Area Connection" ms_tcpip6
And that's it! You're done.
This will set the priorities (IPv4 and IPv6) to:
1. LAN
2. WLAN
3. WAN (if present)

SQL 2012: change startup parameter without GUI

I would like change SQL startup parameter like -l, -d,-e without using SQL Server Configuration Manager. I want to use command line...how can I do it ?

If its SQL server 2008 R2 SP2 and higher we have DMV(dm_server_registry). As the Registry holds the startup parameters can be different for different
instances using dm_server_registry DMV will return the correct path for startup parameters.
select * from sys.dm_server_registry where value_name like 'SQLArg%'
SQLArg0 identifies the master db data file.
SQLArg1 identifies the Errorlog folder.
SQLArg2 identifies the master db log file.
xp_regwrite to change startup parameter.

Change network parameter using ndd permenantly

Similar Messages

Maybe you are looking for