Change not effective in production?
Dear Friends,
I had improved the code for a variable exit used in a planning sequence.
Only the exit code was changed to handle data processing better. Thus, no filter or modeler settings were changed.
In development, this change proved to have fixed the problem.
I transported it to QAS and it also solved the problem there.
When I transport to Production, the old error remained. The planning sequence runtime gave the same error.
It is a generate combinations function.
I checked the exit was transported successfully and modeler settings are the same as in Development.
The error said step 'x' was having error.
I do not know how to tell where is this step 'x'. If the system is able to identify a certain step giving problem, how can i know more what this step is exactly?
Its either in the characteristics relationship or in the filter.
How can I tell for sure what is it complaining about that prevents the generate combinations function to run properly?
Hope to get some tips. What steps can I take to narrow down the problem or what else should / could I do?
regards
YHogan
Edited by: Yohannes Hogan on Jun 19, 2008 5:02 PM
Dear Mayank,
Thanks, points awarded.
Sorry, I do not yet understand what is meant by data being inconsistent. I hope to understand what is inconsistent data . could you be generous and show me a simple example using records?
am i right to say that characteristic combination will 1st check what data already exist in the cube before data is generated and written to the plan cube ?
am I right to say that if there is inconsistent data pre-existing , characteristic combination could fail due to .....?
I thought characteristic combination will generate whatever combination is derived in the target characteristics , generating records that do not yet exist also ?
Could characteristic combinations be generated as new records if one of the target attribute-derived characteristics is derived as 'blank' ?
many thanks!
Yhogan
Edited by: Yohannes Hogan on Jun 25, 2008 6:15 PM
Similar Messages
-
Transporting form BOX to another BOX to production BOX changes not effect
Hi Expert's,
Good Day!
I would like some help from on my object from "Transporting form BOX1 to another BOX1 to production BOX changes not effect" ??
The issue is regarding transaction SE51 (screen painter). I was changing the Define Length from 45 to 55 upon activating their will be a pop-up information message will appear "Selection screen: Report generation makes screen changes ineffective". After the activation the Define Length in transaction se51 will now be 55.
However, upon transporting to another Box/system the Define Length will be 45 instead of 55. Can you help me how to solve this problem? What to do to avoid the changes in the Define Length so that it would still be 55 instead of 45?
Answer's will be a great help.
Thank you,
~Junne RayHi Satya,
Good Day!
I was changing the Screen (transaction SE51) of a field Define Length from 45 to 55. the changes is transported and reflected to another box but when transporting it again to the production box the Screen (transaction SE51) the Define length changes again to 45 instead to 55.
~Thank you so much
Junne Ray
Edited by: jrvillacortz on Mar 25, 2009 6:23 AM -
Smartform Changes not effective
Hi Gurus,
I worked on an existing smartform making some changes. I did not take backup of the form before making changes. Is there a way to get the form before changes now. <removed_by_moderator>
Regards,
B
Edited by: Julius Bussche on Aug 14, 2008 11:24 PMThere is no way you can get back your smartform until you make a back up of your form.
But, if you haven't released the form to QA or production then you can easily get back the original form(i.e. SF before changes)
Ex:
Login to QAS, give your smartform name and download you smartform, come back to development and upload you SF. this is the way you can get back you original SF.
Close the thread once your question is answered.
Regards,
SaiRam -
Keyboard change not effective on login screen
Hi,
I just got a new iMac with wired keyboard and set it up using that keyboard (US layout).
Then I installed my wireless keyboard (FRench layout) and changed the keyboard layout in Internationalisation preferences. It changed everywhere (I had to do the manipulation for all users on the system) except on the session open screen.
Is there a setting/preference to tell which keyboard to use on session opening? It seems that the preference setting is for users only. Is there a preference setting for the entire system?
I have admin privileges in my account.
Many thanks in advance for your help.FYI, reply to my own post.
http://docs.info.apple.com/article.html?artnum=302418
/p -
Changes done in options are not effected - not able to change home page
When I do changes in the tools-options menu the same is not effected in the next re-start of firefox. For example if I change my home page to a new web page, the same is not opening in the next restart of firefox. Not only this any change done in the options menu is not effected
See:
* http://kb.mozillazine.org/Preferences_not_saved
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols -
Changes to HTML template not reflected in production
Hi All,
I am facing the following issue.
I have changed an already existing screen(HTML template) and published the service. It is working fine in development environment. This is now transported to production environment and the screen change is not reflected here. We have tried refresing the ITS buffer, but hasnt worked. Any pointers would be of great help.
Thanks,
ShrutiHi Shruti,
did you check the changed template in the productive environment? Did the transport successfully reached the new system?
If the changed template is available please (re)publish the file on the new environment.
Regards,
Sabine -
Preference status not changed for the processed products
Hello All,
While Aggregating the vendor declaration, I am getting the message as below
Preference status not changed for the processed products
Could you please help me to resolve this issue.
Thanks & Regards
RahulHello Rahul,
aggregation is not changing status on LTVD. (Possibly LTVD has been already agregated). Newly maintained LTVD is not changing status of the product, its remaining negative whatsoever.
Kr,
Gabriel. -
Hi, I have just changed contract and phone and wish to transfer the content of my iphone 4 to my new phone device which is not and I-product. When I attempt to sign into i-tune to transfer the item to dropbox, i am unable to sign into i-tune. Help pls.
Hi, Kilted, I shall put it as below:
Cancelled a contract on my Iphone and started another contract with Samsung Note 2 on O2. Managed to transfer almost all my data bar the content of my notes through drag and drop from itune to sKies prior to contract cancellation.
When I later connected the iphone to the laptop to carry out an advise of going into itune to drag and drop the note content into dropbox from where I could pull into the samsung device, I was denied access into itune with my id , the same which has facilitated my access to this chat community.
Question then: Am I not able to use itune again because of the contract cancellation? -
Bought Iphone Off of craiglist and it is not an att product the iphone had a gci sims card in it . How do i unlock phone and change carriers
You contact the carrier it is locked to.
Unfortunately, if it's actually a GCI phone, they do not offer unlocking. -
How can I install GIMP for pictures effects ? They say I couldn't cause it's not an apple product ?
10:10 PM Sunday; January 13, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
OIA rbacx/WEB-INF files' changes are not effecting
Hi All,
We have deployed OIA 11.1.1.5.0 in weblogic 10.3.5 (as folder deployment) , on top of managed server "oia_server1".
when ever, we changes any config files in rbax/WEB-INF folder, thats not effecting immediatly (after restart also, its not effecting). Its effecting, after redeploy the war again.
We have deployed war as "folder deployment method" (selected war as folder), in our previous env, it was effected immdiatly (with out restart). In our new deploy, we have created "managed sevrer" and deployed on top of managed server and its not effecting immediately, when we change any files in rbacx/WEB-INF folder.
Please suggest me.
Thanks.It happened to me as well :(
The deployment gets effected only if you re-deploy the war file or click on Update (if you are using Weblogic).
The managed server takes the cache folders of deployment even after the re-start. The only difference and way to perform is to update the application in the deployments section, which does not even require a restart of the server.
Krish. -
Purchase order enhancement is not effective
Hi Expert,
I have a requirement about the purchase order. The requirement is that we must maintain the field collective no under the document header level. If there is no value exist , I can't print out the purchase order for the signature.
I have looked for the enhancement MM06E005, but it's not effective. I have looked for the enhancement MM06E005, but it's not effective. Which method is fit for my requirement, badi or enhancement? If using the badi, please tell me the badi name and its relevant method.
Thanks.
George shiHello
There are badis related to PO
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
ME_BAPI_PR_CHANGE_01 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CHANGE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CREATE_01 BAdI: Enjoy BAPIs for Purchase Requisitions
ME_BAPI_PR_CREATE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Crea
ME_BSART_DET Change document type for automatically generated POs
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standa
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CHDOC_ACTIVE Activation of Further Change Document Updates
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_OUTBOUND_SAVED Outbound message saved
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Cust
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Custom
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_REQ_APPROVAL Control of Buyer Approval After Changes to PReq Item
ME_REQ_HEADER_TEXT Copy Header Text: Enjoy Purchase Requisition
ME_REQ_NEW_VERSION Trigger new purchase requisition version
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_REQ_POSTED Purchase Requisition Posted
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
MEREP_RSLTHNDL2 SAP Mobile: BAdI definition for Result Handling
MEREP_RUNTM_LD2 SAP Mobile: BAdI definition for Runtime Loader
MESSAGES_RFW Badi for error handling RFW
METH_FOBU_CONNECTOR Appl. Specific Functions for Formula Builder Method Impl
METH_FOEV_CONNECTOR Appl. Spec. Functions for FB Method Implementations
Thanks
Anirudh Saini -
Security Issue httpOnlyCookies="true" is not working with production environment
Dear All,
I have tired to make set cookie value as httpOnly
The development environment is working fine and give me an output like that
Set-Cookie
WSS_KeepSessionAuthenticated={3644d93c-d1d3-46cd-845f-42c01640ab21};
path=/;
HttpOnly
But when implement the same changes in web.config production environment its not working
Set-Cookie NLSessionCdomainweb=a98q9jnsy0vXk5+RHeHnlKmM+HnneA9KmhIAR6g1bJiwTs8sD6d7dfV1gBffc8HiJXBowxdO8LhZAiIEKiFY6PzNWySyRs5rvgCfPu8XIFnqKcN4XQ4UL9PN3JI3f4E6;path=/;domain=.domain.com
I am using sharepoint 2010, under web.config i made the following changes
Add following tags under system.web
<httpRuntime maxRequestLength="2097151" enableVersionHeader="false"
/>
<httpCookies httpOnlyCookies="true"/>
Add following tags under <system.webServer>
<httpProtocol>
<customHeaders>
<remove name="X-Powered-By" />
<remove name="MicrosoftSharePointTeamServices" />
</customHeaders>
</httpProtocol>
Can any one tell me why it's happening i have checked all possible reasons from my side but no success
Regards
Rashid Bilgrami
RBHi,
From your description, I know you want to set cookie value as httpOnly but it is not work.
Please try to add codes below to your global.asax file:
<SCRIPT language="C#" runat="server">
protected void Session_Start(Object sender, EventArgs e)
try
if (Request.IsSecureConnection == true)
Response.Cookies ["ASP.NET_SessionId"].Secure = true;
catch (Exception)
</SCRIPT>
Please refer to this article:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/0fe55c13-3911-422e-af17-cb5c1ab2abd7/missing-secure-httponly-flags-on-sharepoint-2010-cookie?forum=sharepointadminprevious.
Best Regards
Vincent Han
TechNet Community Support -
Delivery schedule line number in sales order is not populated in production
Hi all,
i am doing make to order scenario with 20 strategy group. In sales order we r defining the different delivery schedule lines.when i run the MRP and getting the plan orders for all the FG material and semifinished material, the sale order number and sale order item number is getting updated in production order . Beside these two , delivery schedule line number is not populated in production order.
please give your valuable suggestion .
i would be highly thankful to u
Will reward points.
Regards
KumaraguruHi Kumar,
Some changes done in your PRD server.If yes then contact abap consultant regarding the same.
Because these type of problem comes when you do transport or changes done in the system.
Regards,
Anil -
Support message and change requests only for production system
Hi guys,
I would like to connect the solman helpesk with CHARM ( CHARM is still running ).
In CHARM I have to create a CR only for production system. ( don't know why - but works as designed).
In SAP helpdesk I can create support messages for every kind of system type but if I want to connect both (HD and CR) , the source system (ibase component) of the issue will copied to the CR and runs in error because of the rule (only p-system) of CHARM.
Of course I can change the ibase to production system manually in SDCR but it seems a very error-prone method.
Now my question: is it possible to change the ibase component due to the creation of CR by copy rule or something like this?
Kind regards
RaykoHi Rayko,
We do not have this option.
Once in ChaRM, we assume that the changes will always correct an issue in the PROD system.
I would recommend to open the tickets directly with the PROD system IBase, once the issue is also happening there.
Best Regards,
Fernando
Maybe you are looking for
-
Hi, I have an add-on that could be use to print a few reports. I created a SAP Form with UI API that contains parameters then I have a Windows Forms with the CrystalReportViewer. My problem is that,standard export function of the Viewer did not work.
-
Given Word, Whether InDesign
I am struggling with whether to buy and learn InDesign. I have used Microsoft Word to create and publish several books. Some of them ended up on Google Books (a direct conversion to .pdf) and others I published privately using Kinko's (also in .pdf).
-
Customer hierarchy changes history
Hello, is it possible to see all changes done in a customer hierarchy (entry in CDHDR CDPOS tables for exemple) ? Thanks.
-
Weblogic 10 Ant task, JMS Module & Foreign JMS Destinations
Any body knows how to configure JMS System Modules (which got introduced in WL ver. 9) and other JMS MBeans such as JMS Destinations and ConnectionFactories under the newly created JMS Module, using ant task for Weblogic 10.3 ? Also, when I create th
-
Cannot backup the catalog in Photoshop Elements 12
Hi I installed PSE 12 and imported my Pictures catalog. I went to backup the catalog and it won't backup. I follwed the directions and rebuilt the thumbnail cache then repair and re-index... Here is the error message: I'm running Win 8.1 12 gb ram C