Change number in mm02

I want to change a material (mm02) with a change number with a valid from date which is a future date.
But the system gives an error message saying that the valid from date is in future.
Is it possible to change the material with a valid from date, which is a future date?

Dear Amit,
1.Create a Change number without release key as per the system's date as the
valid from date.
2.Use that change number in T code MM12 and make the changes and save the
data for the material.
3.Even if you want to create a change number as on system's date and assigning
the alternative date,this will work out only using T code MM12 and not through
MM02.
Please revert back to forums in case if there is any more problem.
Regards
Mangal

Similar Messages

MM02 - Enable options change number, change overview and change documents

I am with the following problem: I enter the transaction MM02, I enter the material 1000765, I select the view "Classification". Later I access the environment option from the menu bar and options for change number, change overwiew and change documents are disabled.
How do I enable these options change number, change overview and change documents?
Regards,
Sérgio Salomã

Hi Sergio,
If we activate the change documents for classification data, then we will be able to see the CHANGE DOCUMENTS for characteristic values through CL20N transaction (CL20N via menu ENVIRONMENT --> Change Documents) or MM02.
For reference please check SAP Note 65124.
For enabling change documents for classification data in SPRO --> Cross-Application Components --> Classification System --> Classes --> Maintain Object Types and Class Types.
In this enter into MARA table entry. Inside that corresponding to the respective CLASS TYPE (say 001) enable the CHANGE DOCS check box in Classifications part (For enabling this please check SAP Note 65124). Then for this CLASS TYPE (say 001) inside the OBJECTS folder, enable the CHANGE DOCS CLASS checkbox also.
Now in MM02 and in CL20N under menu Environment --> Change Documents you can view all the changes done to that characteristic values.
Once the change documents is activated, then we can get the change documents details in CDHDR and CDPOS tables. The OBJECTCLAS may be "CLASSIFY". We can also use the "CLLA_CHANGE_DOC_CLASSIFICATION" function module to fetch the data from these tables.
Hope this helps in solving your issue.
Thanks and Regards,
Harish kumar.

Change number in material master required steps to use

Hi All.
Thanks in advance sap mm dudes.
Need steps in sap mm material master change number.
creation of change number and usage of change number
Display of list of changes.
Regards.
parameshwar

Dear Parameshwar,
1.I assume you have created a change number without release key in CC01.
2.In CC02,for the same change number goto object types and include the check box against material for the first 3 check box and
save the change number.
3.Now check in MM02 for any material master changes or I would suggest you to create a new change number with valid from
date as current date,include the settings for material under object types and then check in MM02.
Check and revert.
Regards
Mangalraj.S

ECM-Problem with Change number in CS01 and CS02 Transactions

Hi Experts,
I am creating or changing BOM's using above transactions. I am entering the change number while creation and changing the BOM to track the changes.Here my problem is these transactions are not validating the ECM number.
If you enter any value in the change number filed system is allowing me to create a BOM.
I am assuming that becasue of patches applied to system,I am getting this.
kindly help me out on this issue.
Thanks in Advance,
Regards,
Rakesh J
Edited by: J.Rakesh on Apr 22, 2009 10:26 PM

Dear Mangalraj,
Thanks for your reply.
We are not using CC01 transaction to create Change number. Z transaction is there to create change number.
My change number contain alpha numreic charectors Eg : 341793ABCXYZ
Yes, in CS01 system is accepeting any value that we enter :Eg: asddfgh. The value is not there in AENR table.
I observed one thing If I am going to chnage a material using MM02, there its not accepeting any value,its accepeting the values which are there in AENR table otherwise its giving error :Change Number XXXXXXXX does not exist.
My question is same thing should function in CS01 and CS02, why its not happening for these transactions.
Regards,
Rakesh J

BAPI needed for change material(Transaction : MM02)

Hi all,
We have a requirement where in we need to post the documents throuh BAPI for change material (Transaction: MM02).
Any inputs on this..is highly appreciable...
thanks in advance...
regards..
prathima.

CHECK THIS CODE
*& Report ZBAPI_MATERIAL_SAVEDATA
REPORT ZBAPI_MATERIAL_SAVEDATA NO STANDARD PAGE HEADING MESSAGE-ID (ZHNC).
TYPES:BEGIN OF TY_MAT,
       MATERIAL(4),
       IND_SECTOR(1),
       MATL_TYPE(4),
       MATL_GROUP(9),
       BASE_UOM(3),
       BASE_UOM_ISO(3),
       PLANT(4),
       DEL_FLAG(1),
       PUR_GROUP(3),
       BASE_QTY(13),
       STGE_LOC(4),
       MRP_IND(1),
       SALES_ORG(4),
       DISTR_CHAN(2),
       DEL_FLAG1(1),
       MIN_ORDER(13),
       LANGU(2),
      MATL_DESC(40),
   END OF TY_MAT.
DATA: IT_DATA TYPE TABLE OF TY_MAT,
      WA_DATA LIKE LINE OF IT_DATA.
*decalraing flag
data: v_flag value ''.
*DECLARING WORK AREAs TO BE PASSED TO THE FUNCTION MODULE.
DATA: BAPI_HEAD LIKE BAPIMATHEAD,
      BAPI_CLIENTDATA LIKE BAPI_MARA,
      BAPI_CLIENTDATAX LIKE BAPI_MARAX,
      BAPI_PLANTDATA LIKE BAPI_MARC,
      BAPI_PLANTDATAX LIKE BAPI_MARCX,
      BAPI_STORAGELOCATIONDATA LIKE BAPI_MARD,
      BAPI_STORAGELOCATIONDATAX LIKE BAPI_MARDX,
      BAPI_SALESDATA LIKE BAPI_MVKE,
      BAPI_SALESDATAX LIKE BAPI_MVKEX,
      BAPI_MAKT LIKE BAPI_MAKT,
      BAPI_RETURN LIKE BAPIRET2.
*INTERNAL TABLE TO HOLD THE MATERIAL DESCRIPTION
DATA: BEGIN OF IT_MAKT OCCURS 0.
INCLUDE STRUCTURE BAPI_MAKT.
DATA END OF IT_MAKT.
DATA:BEGIN OF IT_RET OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA END OF IT_RET.
*INTERNAL TABLE TO HOLD HEADER DATA
DATA: IT_EXCEL TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
*SELECTION-SCREEN ELEMENTS
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER: FNAME TYPE RLGRAP-FILENAME OBLIGATORY DEFAULT 'C:\Documents and Settings\Administrator\Desktop\MATMAS.XLS' .
PARAMETERS: P_BEGCOL TYPE I DEFAULT 1 NO-DISPLAY,
            P_BEGROW TYPE I DEFAULT 1 NO-DISPLAY,
            P_ENDCOL TYPE I DEFAULT 100 NO-DISPLAY,
            P_ENDROW TYPE I DEFAULT 32000 NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK B1.
*DECLARATION OF EXCELAL TABLE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FNAME.
PERFORM F_GET_FILE USING FNAME.
START-OF-SELECTION.
PERFORM F_XLS_ITAB USING FNAME
                   CHANGING IT_EXCEL.
PERFORM F_MOVE_DATA.
perform F_GET_DATA.
*&      Form F_GET_FILE
      text
     -->P_FNAME text
     <--P_SY_SUBRC text
FORM F_GET_FILE USING    P_FNAME LIKE FNAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
   PROGRAM_NAME        = SYST-REPID
   DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
STATIC              = ' '
MASK                = ' '
CHANGING
    FILE_NAME           = P_FNAME
EXCEPTIONS
MASK_TOO_LONG       = 1
OTHERS              = 2
IF SY-SUBRC <> 0.
MESSAGE E006(ZHNC).
ENDIF.
ENDFORM.                    " F_GET_FILE
*&      Form F_XLS_ITAB
      text
     -->P_FNAME text
     <--P_IT_EXCEL text
FORM F_XLS_ITAB USING    P_FNAME
                 CHANGING P_IT_EXCEL.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    FILENAME                      = FNAME
    I_BEGIN_COL                   = P_BEGCOL
    I_BEGIN_ROW                   = P_BEGROW
    I_END_COL                     = P_ENDCOL
    I_END_ROW                     = P_ENDROW
TABLES
    INTERN                        = IT_EXCEL
EXCEPTIONS
   INCONSISTENT_PARAMETERS       = 1
   UPLOAD_OLE                    = 2
   OTHERS                        = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " F_XLS_ITAB
*&      Form F_MOVE_DATA
      text
--> p1        text
<-- p2        text
FORM F_MOVE_DATA .
DATA : LV_INDEX TYPE I.
FIELD-SYMBOLS <FS>.
*--- Sorting the internal table
SORT IT_EXCEL BY ROW COL.
CLEAR IT_EXCEL.
LOOP AT IT_EXCEL.
MOVE IT_EXCEL-COL TO LV_INDEX.
*--- Assigning the each record to an internal table row
ASSIGN COMPONENT LV_INDEX OF STRUCTURE WA_DATA TO <FS>.
*--- Asigning the field value to a field symbol
MOVE IT_EXCEL-VALUE TO <FS>.
AT END OF ROW.
APPEND WA_DATA TO IT_DATA.
CLEAR WA_DATA.
ENDAT.
ENDLOOP.
ENDFORM.                    " F_MOVE_DATA
*&      Form F_GET_DATA
      text
--> p1        text
<-- p2        text
FORM F_GET_DATA .
LOOP AT IT_DATA INTO WA_DATA.
MOVE-CORRESPONDING WA_DATA TO BAPI_HEAD.
BAPI_HEAD-BASIC_VIEW ='X'.
BAPI_HEAD-SALES_VIEW ='X'.
BAPI_HEAD-PURCHASE_VIEW ='X'.
BAPI_HEAD-STORAGE_VIEW ='X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_CLIENTDATA.
BAPI_CLIENTDATAX-MATL_GROUP = 'X'.
BAPI_CLIENTDATAX-BASE_UOM = 'X'.
BAPI_CLIENTDATAX-BASE_UOM_ISO = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_PLANTDATA.
BAPI_PLANTDATAX-PLANT = BAPI_PLANTDATA-PLANT.
BAPI_PLANTDATAX-DEL_FLAG = 'X'.
BAPI_PLANTDATAX-PUR_GROUP = 'X'.
BAPI_PLANTDATAX-BASE_QTY = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_STORAGELOCATIONDATA.
BAPI_STORAGELOCATIONDATA-PLANT = BAPI_PLANTDATA-PLANT.
BAPI_STORAGELOCATIONDATAX-PLANT = BAPI_STORAGELOCATIONDATA-PLANT.
BAPI_STORAGELOCATIONDATAX-STGE_LOC = BAPI_STORAGELOCATIONDATA-STGE_LOC.
BAPI_STORAGELOCATIONDATAX-MRP_IND = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_SALESDATA.
BAPI_SALESDATAX-SALES_ORG = BAPI_SALESDATA-SALES_ORG.
BAPI_SALESDATAX-DISTR_CHAN = BAPI_SALESDATA-DISTR_CHAN.
BAPI_SALESDATAX-DEL_FLAG = BAPI_SALESDATA-DEL_FLAG.
BAPI_SALESDATAX-MIN_ORDER = 'X'.
REFRESH IT_MAKT.
IT_MAKT-LANGU = WA_DATA-LANGU.
IT_MAKT-MATL_DESC = WA_DATA-MATL_DESC.
APPEND IT_MAKT.
CLEAR IT_RET.
REFRESH IT_RET.
PERFORM F_CALL_BAPI.
READ TABLE IT_RET WITH KEY TYPE = 'S'.
IF SY-SUBRC EQ 0.
PERFORM F_BAPI_COMMIT.
WRITE:/ 'MATERIAL CREATED OR UPDATED SUCESSFULLY WITH MATERIAL NO',WA_DATA-MATERIAL.
ELSE.
MESSAGE E000(ZHNC) WITH 'ERROR IN CREATING THE MATERIAL'.
*WRITE: / 'ERROR IN CREATIN MATERIAL',IT_RET-MESSAGE.
*PERFORM F_DOWNLOAD.
ENDIF.
*ENDIF.
ENDLOOP.
ENDFORM.                    " F_GET_DATA
*&      Form F_CALL_BAPI
      text
--> p1        text
<-- p2        text
FORM F_CALL_BAPI .
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
    HEADDATA                   = BAPI_HEAD
   CLIENTDATA                 = BAPI_CLIENTDATA
   CLIENTDATAX                = BAPI_CLIENTDATAX
   PLANTDATA                  = BAPI_PLANTDATA
   PLANTDATAX                 = BAPI_PLANTDATAX
   STORAGELOCATIONDATA        = BAPI_STORAGELOCATIONDATA
   STORAGELOCATIONDATAX       = BAPI_STORAGELOCATIONDATAX
   SALESDATA                  = BAPI_SALESDATA
   SALESDATAX                 = BAPI_SALESDATAX
IMPORTING
   RETURN                     = IT_RET
TABLES
   MATERIALDESCRIPTION        = IT_MAKT
UNITSOFMEASURE             =
UNITSOFMEASUREX            =
INTERNATIONALARTNOS        =
MATERIALLONGTEXT           =
TAXCLASSIFICATIONS         =
RETURNMESSAGES             =
PRTDATA                    =
PRTDATAX                   =
EXTENSIONIN                =
EXTENSIONINX               =
APPEND IT_RET.
ENDFORM.                    " F_CALL_BAPI
*&      Form F_BAPI_COMMIT
      text
--> p1        text
<-- p2        text
FORM F_BAPI_COMMIT .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT         =
IMPORTING
RETURN        =
ENDFORM.                    " F_BAPI_COMMIT

Cancel Change Number control in material master routing maintance?

Dear expert
In our company, we have PLM function and must enter change number in material master and routing screen
MM01/MM02 CA01/CA02,could I cancel this control and where is the configuration path in SPRO?
Thanks
Linfeng

Kindly check in OS54.
Under Revision Level, unselect the check box Rev. Level active. If you want that automatic, you can go for Rev. Lev. Automatic. Before doing any changes in config, please explore pros & cons of the same.
For routing, in OP5A, set the field selection as Change Number - Input
[Change Management|http://www.sap-img.com/pp007.htm]
Regards,
Edited by: Maheswaran.K on Aug 3, 2011 10:27 AM

Mat master-change number

HI
in mm01/mm02 initial screen Chnage number is there .
i tried to eneter some no say 99 in change no field & mat code system says change no deosen't exist.
wat is the use of Change number,
where we need to do setting in order to use it

hi
1) change material no is come in to picture when there is change in PRODUCT , and that change is finalised & released thru ECN ( engg changed note ) .
If the master for same product is avaliable and one has to go for Incorporate changes automatically in VALIDITY, PRODUCT CODES , EANs and so on by using this featre.
in short is reference no from which one can easily trace out the how many times mat. is changed ?
2) is a one can easily control change type thru SPRO ,
path is LOGISTIC GENRAL > Engineering change management > DEFINE statuses for change master records.
records are continaing change type ..
hence u have to define change statuses and change type also u have to define number ranges for change number.
Kaustubh

Hide field for " Change Number". RMMG1-AENNR " in MMR

Hi,
In MM01 and MM02, i want to hide field for " Change Number".
I tried in OMSR and OMS9, but i could not find field "RMMG1-AENNR".
Hw to make it hidden.
Uts
Edited by: Utsav.agra on Jun 1, 2009 9:17 AM

Check is your problem can be solved by Screen or transaction configuration?
T Code is SHD0

How to find Change number for a Material

Hi,
If we know the material number and Revision level then how can we find the Change Number of that material.
Is there any table in which i can find Change number for a revision level or is there any Function module available.
Regards,
Vaibhav

Hi Vaibhav,
Is there any table to find the change number and revision level of a material. I have change number and material and revision level coming from external system. But i need to check that with SAP whether it exists or not.
Is there any table link to find whether a material has change number.

Error while changing BOM with change number

Hi ALL, Please help me with followed error message, I am using ECM. I created ECR and converted to ECO and then released.
Object management record cannot be generated
Message no. 29046
Diagnosis
You want to change the BOM with the entered change number.
One of the following situations triggered this error message:
1. The indicator that allows automatic generation is not set for object type BOM in the change master.
2. The indicator generation only on initial creation is set for object type BOM
3. You are processing a change request.
System response
The system checks whether the indicator object management record will be generated is set in the change master.
If the indicator generation only on initial creation is set, the system checks whether the BOM exists in the system.
Procedure
If you are authorized to change the change master, execute the following steps:
For 1.)
Set this indicator for object type BOM or create the control record in the change master.
For 2.)
If the BOM already exists in the system and the generation only on initial creation indicator is set, the system can no longer generate the control record automatically.
In this case you have to add the object control record to the change master first, then you can change the BOM in relation to the change number.
For 3.)
You cannot generate any object control records for a change request.

Hi
With your question regarding changing BOM with change number it looks lke there may be problem in defining the Object types,objects.Moreover whenever converted to ECO you need to enter into cs02 tcode for changing the bom with relevant change number and valid from date.
Hope this gives you a clear idea.let me know if you need anyfurther inputs.
Regards
Praveen

Need to fetch change number for tcode IA06

Can anyone please tell me how do I fetch the change number (Aennr) in case of tasklist chage? Tcode IA06?
I am using FM CP_EX_PLAN_READ which returs me change number..but it is not populated....
Plz help.

hi check this..
check the table AENR for the aennr values...
here is an example for this fm..
call function 'CP_EX_PLAN_READ'
     exporting
          plnty_imp        = i_plnty
          plnnr_imp        = i_plnnr
          plnal_imp        = i_plnal
          sttag_imp        = i_sttag
          cuobj_imp        = i_cuobj
          parnt_imp        = i_parnt
          i_plant          = i_werks
          tca11_imp        = ls_tca11
     tables
          plmz_exp         = lt_plmz
          plpo_exp         = lt_plpo
     exceptions
          not_found        = 1
          plnal_initial    = 2
          others           = 3.
regards,
venkat

How to fetch the latest change number from CDPOS Table..?

Hi All,
im trying to fetch teh change number from CDPOS with the below select, but my requirement is always i wants to fetch the latest change number.
          SELECT SINGLE objectid changenr FROM cdpos
                 INTO wa_cdpos
                 WHERE objectid = wa_e1kna1m-kunnr
                 AND ( tabname = 'KNA1' OR tabname = 'KNVV')
                 AND   fname = 'AUFSD'
                 AND ( value_new = '01' OR value_new = space ).
Please let me know how to achive this..?
Ashok

try this way
"           SELECT SINGLE objectid changenr FROM cdpos
"                 INTO wa_cdpos
           SELECT objectid changenr FROM cdpos
                  INTO table t_cdpos
                  WHERE objectid = wa_e1kna1m-kunnr
                  AND ( tabname = 'KNA1' OR tabname = 'KNVV')
                  AND   fname = 'AUFSD'
                  AND ( value_new = '01' OR value_new = space ).
SORT t_cdpos by changenr Descending.
read t_cdos index 1.    "this is the latest change
Prabhudas

Can't make a selection of my pathes even if i have set a program change number for each one.Why is that happening?

Hi everybody!
I send program change messages from my midi controller and the messages are accepted by mainstage 3 as shown in the midi message window,but i can't make a selection of my pathes even if i have set a program change number for each patch.Why is that happening?
I use a novation SL mki or a KORG Triton Le or a m-audio axiom 49 as midi controllers.The program change messages are transmitted by all the devices i mentioned above and shown as received in the midi messages window of mainstage 3.
Has anyone the same experience?

Hi
Have you selected the correct device as the Program Change device and MIDI channel in the Concert Inspector?
CCT

In iPhoto how do I open Photo Grid to change number of caption lines?

In iPhoto how do I open Photo Grid to change number of caption lines?

In iPhoto '11 you can only display two lines below the thumbnails of your photos when you browse an event or an album, the titles and the ratings. The title will be truncated, if it does not fit into the single line. From the iPhoto help:
To show title and rating information below photos:
Click to select Photos in the Source list.
Choose View, and then choose the information you want to view:
Titles
Rating
The information field you chose appears below your photos.
To hide this information, choose View, and then choose the information you want to hide.
Regards
Léonie

PI 7.31 (single stack) posting RFC gives this error: RFC_ERROR_SYSTEM_FAILURE: Processing of change number CO-01234 cancelled (raised by system ECCHostXYZ)

I'm trying to determine if I am dealing with an RFC connection issue or just an error resulting from the RFC itself.
The error says "Processing of change number...cancelled (raised by...ECCHostXYZ)".
I thought this was a problem with my RFC config because it is labeled as "RFC_ERROR_SYSTEM_FAILURE".
However, when I google that specific message, it appears to be an error specific to change order creation.
Here’s my google search: http://goo.gl/ZhKsm3
Here is the error again:
RFC_ERROR_SYSTEM_FAILURE: Processing of change number CO-01234 cancelled (raised by system ED1|ecc-host-xyz)
When I check ST22, I see no RFC errors.

Hi Jody,
No st22 exception is needed to be throwed in order to raise a controlled exception in the RFC.
You would need to check the RFC in the ECC system with the data that you are sending from PI, if the data is the same, you would need to check PI user RFC roles with the ECC roles user that you used to check the data integrity in the ECC test.
To avoid this error you can do a Z RFC to wrap the standard RFC and to control the exceptions errors with a BAPIRET2 strucutre to return to PI.
Hope this helps.
Regards.

Change number in mm02

Similar Messages

Maybe you are looking for