Change number mandatory for display routing

Hello friends,
Through OP5A I hade made the change number field mandatory for routing.
System ask for change number while changing or creating the routing.
But my question is system should not ask for change number during display routing. ( If a item had gone through many changes during a period. By default system should take latest only)
Is there any way? or some development is required
Thanks in advance
Maruti

Hi,
This requirement is genuine but liitle tricky..
Follow th procedure as below:
in OP5A:
1. Double click on PP Task Lists. Do not select the Change Number mandatory there.
2. Click on Influencing Button
3. Double click on Transaction Code:
Here, select the "Change No." as required and in the Contents filed, put CA01 and Pres Enter.
Afterwards put CA02 and Press enter.
4. Now Press on Influences Button.
Here you can see that the Transaction Code - Change number is mandatory for CA01 and CA02.
But not for CA03
Remeber to press enter after inputing the Transaction codes, otherwise those will not apper in influences..
Try this revert for further discussion.
Regards,
Siva

Similar Messages

Make the ECM Number mandatory for Routings

Dear All,
in SAP Standard it is possbile to make the ECM (Change No.) mandatory for BOMs using the authorization Object "C_STUE_NOH".
Without entering the change number the system will give an error message, maintenance/creation is not possible with CS01 and CS02.
The question is, if something similar is existing for Routings?
Thanks for the usefull hint/help in advance.
Csaba Mathe

Dear All,
the topic is still open, the transaction OP5A is not working fully as required.
The business need is: make the change number mandatory for CA01 and CA02 transactions, but only for the given Plants. not for all Plant. E.g for Plant A and B it should be mandatory, however for the Plant C should not be mandatory.
Based on our setting, to manage such as situation, we see, the system is not working as we expect.
We set the first level condition ofr change numbers the transactions CA01 and CA02. It is working well. In both tranactions the change number is mandatory.
Then we extend the condition by two Plant, we want to have the change number mandatory in CA01 /CA02, however this is not working.
May be there is an error in the standard program?
Regards,
Csaba Mathe

Change number mandatory only for CS02

Hi Expert,
         I want to mandatory the change number only for CS02. I have refereed scn discussion but i am unable to make mandatory the change number.
Refereed comments:
how to make the Change number field in CS02 transaction
A basic SAP Engineering Change Management Setup
ECM Change no Mandatory for CS02 | SCN
Kindly suggest how to make mandatory the same.
Regards,
Santosh Sharma

Hello Santosh
The change number requirements on CS02 is controlled by the authorization object C_STUE_ROH.
Note 420878 provides more information about this scenario.
Check the relevant information provided on the note below:
Symptom
In Customizing of the BOM, the history requirement is set or a BOM requires a history. Despite this, it is possible to process BOMS without engineering change management. The system only processes a warning message (29 045) which can be skipped.
Additional key words
CS02, change number, OS27, W045(29)
Cause and prerequisites
Authorization profile
Solution
Check the authorization profile of the respective user.
Example:
         C_STUE_NOH <OBJ>
            &_SAP_ALL    <AUT>
                NOHIS      <FLD>
would have the authorization to process BOMs requiring history without a change number. In this case, if you change '*' to ' ' in NOHIS, you will no longer receive a warning, but rather an error message.
BR
Caetano

ECM Change no Mandatory for CS02

Dear all,
To make the ECM change no mandatory for CS01 and CS02 i have followed the below settings.
1.In OS27 - Check box included for BOM validity maintained,EC Management active,History Requirement.
2.In OS25 - BOM usage 1 & BOM status 1 - History Requirement check box is included.
3.Authorization object C_STUE_NOH is with No.
After making these changes and saving and assigning the same to that user id,logout and login.
It is working properly for CS01 but for CS02 even waring message it is not giving, directly it is allowing to chage the BOM without change no.
Can any one suggest what may be the issue or any other settings i am missing?
Thanks in advance,
Ganesh

Dear all,
I noticed one issue if the BOM is alraedy created without the change number, when i try to change that BOM it is not throwing error message as Change no. mandatory.
For that same BOM if i assign with one change no and make the necessary change and saved.
After this change it is not allowing me to change the BOM without change no.
My question is all materials BOM are already created in the system, so the user try to change the BOM in CS02 as first time without the change no it allows.
How can we restrict the user to change the BOM with change no only?
I hope my question is clear.
Thanks in advance,
Ganesh

Material Number mandatory for PR exceptP for Service Purchase Requisition

Hi All,
Our client's new requirement is we need to give material number mandatory for Purchase Requisition. But it should not affect for Service Purchase Requisition (as we don't have material number with material type DIEN. Till now, we were using Acc Assignment Category K and Item Category D with only Short Text description). We have separate document type for Service Purchase Requisition(ZSRV).
In order to make Material number mandatory, in PR, we need to give in "Define Screen Layout at Document Level for PR",right? Is there any way to give, "Material Number Mandatory at Document Type Level"?
Please suggest.
Regards,
rosh

hi sridhar,
Thank you for your answer. So as you said, there is no possibility to make material number as mandatory at DOCUMENT TYPE level through Customzining, right?
Regards,
Rosh

Is a toll-free number mandatory for simultaneous VOIP and teleconferencing? How do we get a number, we're an academic institution?

Is a toll-free number mandatory for simultaneous VOIP and teleconferencing? How do we get a number, we're an academic institution?

page is here
http://ca.blackberry.com/support/tablets/playbook/contact-support.html
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Change number mandatory Routing for a particular Plant

Dear All,
i have requirement to make change no field mandatory for only one plant. this field should not be mandatory for other plant. I tried with OP5A tcode, using plant as influencing field, change no as modified field and content as plant no. so its working but,
it doesnt work for the 1st time execution. from 2nd time only its working. like this user will be able to make the changes without change number in every login 1st time.
So i set the plant as user parameter in user profile and made it working. but its not full proof soluton. can any one suggest some solution??
please suggest.
Thanks & Regards
Vinay
Edited by: vinay upadhyay on Sep 7, 2009 9:46 AM

Hello Santosh
The change number requirements on CS02 is controlled by the authorization object C_STUE_ROH.
Note 420878 provides more information about this scenario.
Check the relevant information provided on the note below:
Symptom
In Customizing of the BOM, the history requirement is set or a BOM requires a history. Despite this, it is possible to process BOMS without engineering change management. The system only processes a warning message (29 045) which can be skipped.
Additional key words
CS02, change number, OS27, W045(29)
Cause and prerequisites
Authorization profile
Solution
Check the authorization profile of the respective user.
Example:
         C_STUE_NOH <OBJ>
            &_SAP_ALL    <AUT>
                NOHIS      <FLD>
would have the authorization to process BOMs requiring history without a change number. In this case, if you change '*' to ' ' in NOHIS, you will no longer receive a warning, but rather an error message.
BR
Caetano

Change number of record displayed for a single item alone

Hi,
I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.
Is this achievable?
Or should i have to put that item in a separate data block and choose the data block property to "Number of records displayed" as 10?
Thanks,
Yuvaraaj.

983448 wrote:
Hi,
I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.Yes you can. But i will say re-check your design.
Hamid
Mark correct/helpful to help others to get right answer(s).*

How to change number range for document type ?

Dear All
Experts
How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as
Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
Message no. FAGL_LEDGER_CUST093
I have defined a leading ledger in system too with these settings
1)     Define ledger for accounting.
2)     Defining currencies for it.
3)     Defining ledger group for the same.
4)     Defining accounting principles
5)     Assignment of principles to leading ledger.
Are there any extra settings required for leading ledger settings?
I have some doubts those are :-
How document types defined at ledger level?
How to define them at leading ledger level? (Like my case)
Focus on this will be appreciable.
Regards,
Sharvari Joshi.

hi ,
The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
coming to
1.How document types defined at ledger level?
2.How to define them at leading ledger level? (Like my case)
Ans 1. please try defining document types for entry view in a ledger.
path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
upon prompt enter the ledger and go ahead creating the number ranges for the document types.
Hope this helps.
Regards
amrutha

Impact of changing number ranges for FI & MM for MM Invoice documents

Hello Friends,
Client is asking to have both MM invoice document number and FI document number to be same, what will the impact of this change since we have done many transactions already in production.
Kindly suggest the best time and way of doing his.
Thanks in Advance.
Regards
Ravi

We can align both the FI and MM document number ranges in sync
SAP gives you customizing options to make both document numbers the same. The solution lies in the number range assignment of the MM and FI document. You need to configure the MM document number assignment as internal and external for the FI documents. (FI documents are set up with external-assigned numbering, while the MM document has internal, or system-generated, numbering.) In this case, the MM document number is passed on to the FI document, which means that the number of the FI document is identical to the MM document. .
Because the document number assignment in MM is not company code-specific, in contrast to the FI document, you need to take the following points into consideration before using external document number assignments for FI documents. They have the following effects on your system:
u2022     Continuous number assignments for FI documents are not guaranteed, especially if you have more than one company code.
u2022     The document number ranges in MM and FI have to be the same for all company codes.
u2022     In Release 4.6C, you need to use internal number assignments for revaluation documents, invoice reduction documents, Evaluated Receipt Settlement (ERS) postings, or reversal documents. There are no restrictions as of SAP Enterprise 4.70.
u2022     Use a different number range assignment for FI invoice posting (FB60), because FI invoice postings usually use internal number range assignments and the postings originate in FI, not MM.
u2022     If you use document parking and the number range intervals are fiscal year-dependent, you cannot change the posting date of the document if the fiscal year is different to that determined for the previous posting date. In this case you have to delete the document and re-enter it. There are no restrictions for fiscal year-independent number ranges.
please find below the confiuration steps
OMR4 - CREATE NUMBER RANSGES SAY 52 (EXTERNAL)
AND ASSIGN THE NUMBER RANGES TO DOCUMENT TYPE RE.
OMRJ MAINTAIN MM NUMBER RANGES SAY 52 (INTERNAL)
AND ASSIGN THE SAME FOR DOCUMENT TYPE RD.
Regards
P RAMASUBRAMANIAN

Mterial Number mandatory for Purcahse Resuisition except for Nonstockable I

Hi All,
The requirement is like material number should be mandatory except for Non Stockable items (likePen, Stationery Items) while creating a Purchase Requisition.
I know in SPRO Settings, "Define Screen Layout at Documnet Level" in Purchase Requistion we can make material number as mandatory. But how can we differentiate it for Non-Stockable Item. Please suggest
Regards,
rosh

Hi Jurgen,
Thanks a lot for your immediate response. yes..if we dont have material number it is no longer a stockable item. So
1. If i give material number mandatory in ME51N, i cannot procure Nonstockable items(which does not have material code),rt?
2. If i create material codes with NLAG, is there any possibility that "If i make material number mandatory in ME51N, it should not affect NLAG materials?
Our client's requirement is "Material Number mandatory should not affect for Non - stockable Items". Please suggest how is it possible.
Please reply
Regards,
Rosh

Making old material number mandatory for mm02

hi,
how to make old material number(mara-bismt) mandatory for mm02 transaction.
regards

Hi,
You can do the validation using enhancement "MGA00001", component "EXIT_SAPLMGMU_001".
Regards
Vinod

Changing Number rangeinterval for position & Persons-During Company Merger

Dear Professionals,
Scenario
Parent Company X, which is a MNC, is in the process of take over of another company B, which was in the process of implentation of SAP.
Company X want to implement the same number range interval for the company B.
Now consultants who were in the process of implementation of SAP in company B has to align the business process according to company X.
a)Is it possible to change the interval for person & position
Requesting you professional input
With regards
Raj

Raj,
At a high level, yes technically, it is possible to change the number ranges to be same in both systems. But for a meaningful solution, there are several questions that need to be answered -
1. Will both the companies be on the same landscape after merger/take-over or will it be different
2. Is one of the companies or both already live with SAP? If so, what are the numbers upto which they have already used?
Good luck,
Rajesh K.

Change number report for a BOM

dear sir
where can i get the list of change numbers for a BOM
i.e i want to know how many change numbers exists for a BOM and the list of change numbers for that BOM
thanks in advance
srinivas pai

Following are the list of TCodes for change documents of BOM -
CS80 - Material BOM
CV80 - Document Structure
CC04
CS80
Hope this helps you.

How to change number of records displayed in Web service: Query_view_data

Hi experts
I´m using webservice Query_view_data to fill a Xcelsius model with data.
The Bex Query contains appr. 300 records but the webservice returns only 50 records. When I test it it says "displaying 50 of 312 records".
When I tried ABAP FM RRW3_GET_QUERY_VIEW_DATA it gave all 312 records.
Does anyone know how I can change this setting so that all 312 records are displayed in the webservice?
Best Regards
Kenneth

Mani,
I have changed the properties of the chart as you said and gave 4 decimal places. If my actual data value is 0.787989, i would expect it to result 0.7879 but the outcome is 0.7800. It is replacing the other two decimal places with 0's rather than the actual number. Is this a bug in OBIEE or am i doing anything wrong?? Is there any other way to do this. Please let e know...
Thanks,
vnk
Edited by: user8708843 on Aug 18, 2010 8:03 AM

Change number mandatory for display routing

Similar Messages

Maybe you are looking for