Change number mandatory only for CS02

Hi Expert,
         I want to mandatory the change number only for CS02. I have refereed scn discussion but i am unable to make mandatory  the change number.
Refereed comments:
how to make the Change number field in CS02 transaction
A basic SAP Engineering Change Management Setup
ECM Change no Mandatory for CS02 | SCN
Kindly suggest how to make mandatory the same.
Regards,
Santosh Sharma

Hello Santosh
The change number requirements on CS02 is controlled by the authorization object C_STUE_ROH.
Note 420878 provides more information about this scenario.
Check the relevant information provided on the note below:
Symptom
In Customizing of the BOM, the history requirement is set or a BOM requires a history. Despite this, it is possible to process BOMS without engineering change management. The system only processes a warning message (29 045) which can be skipped.
Additional key words
CS02, change number, OS27, W045(29)
Cause and prerequisites
Authorization profile
Solution
Check the authorization profile of the respective user.
Example:
         C_STUE_NOH <OBJ>
            &_SAP_ALL    <AUT>
                NOHIS      <FLD>
would have the authorization to process BOMs requiring history without a change number. In this case, if you change '*' to ' ' in NOHIS, you will no longer receive a warning, but rather an error message.
BR
Caetano

Similar Messages

  • ECM change no mandatory only for specified Plants in CA01 and CA02

    Dear All,
    I am in the process of activating the engineering change management for BOM and Routing.
    I did the necessary setting to work ECM.
    Now my problem is we have different plants and the ECM has to be activated only for 2 plants.
    To make change number mandatory in CA01 and CA02 for these 2 plants. i followed the below steps.
    IN T CODE OP5A- PP TASK LIST INITIAL SCREEN - CHANGE NUMBER - CHOOSE RADIO BUTTON INPUT - SELECT INFLUENCING -SELECT PLANT -CHANGE NUMBER - ENTER PLANT - CHOOSE RADIO BUTTON REQUIRED
    Same like that I did for both plants. Even after this setting it is not allowing without change number.
    Can any one help me to solve this issue.?
    Thanks in advance
    Ganesh

    Thanks for your reply.
    After giving authorizations also  problem pertains the same.
    Can any one tell steps followed in field selection parameters is right or wrong?
    Regards,
    Ganesh

  • Change number mandatory Routing for a particular Plant

    Dear All,
    i have requirement to make change no field mandatory for only one plant. this field should not be mandatory for other plant. I tried with OP5A tcode, using plant as influencing field, change no as modified field and content as plant no. so its working but,
    it doesnt work for the 1st time execution. from 2nd time only its working. like this user will be able to make the changes without change number in every login 1st time.
    So i set the plant as user parameter in user profile and made it working. but its not full proof soluton. can any one suggest some solution??
    please suggest.
    Thanks & Regards
    Vinay
    Edited by: vinay  upadhyay on Sep 7, 2009 9:46 AM

    Hello Santosh
    The change number requirements on CS02 is controlled by the authorization object C_STUE_ROH.
    Note 420878 provides more information about this scenario.
    Check the relevant information provided on the note below:
    Symptom
    In Customizing of the BOM, the history requirement is set or a BOM requires a history. Despite this, it is possible to process BOMS without engineering change management. The system only processes a warning message (29 045) which can be skipped.
    Additional key words
    CS02, change number, OS27, W045(29)
    Cause and prerequisites
    Authorization profile
    Solution
    Check the authorization profile of the respective user.
    Example:
             C_STUE_NOH <OBJ>
                &_SAP_ALL    <AUT>
                    NOHIS      <FLD>
    would have the authorization to process BOMs requiring history without a change number. In this case, if you change '*' to ' ' in NOHIS, you will no longer receive a warning, but rather an error message.
    BR
    Caetano

  • Change number mandatory for display routing

    Hello friends,
    Through OP5A I hade made the change number field mandatory for routing.
    System ask for change number while changing or creating the routing.
    But my question is system should not ask for change number during display routing. ( If a item had gone through many changes during a period. By default system should take latest only)
    Is there any way? or some development is required
    Thanks in advance
    Maruti

    Hi,
    This requirement is genuine but liitle tricky..
    Follow th procedure as below:
    in OP5A:
    1. Double click on PP Task Lists. Do not select the Change Number mandatory there.
    2. Click on Influencing Button
    3. Double click on Transaction Code:
       Here, select the "Change No." as required and in the Contents filed, put CA01 and Pres Enter.
    Afterwards put CA02 and Press enter.
    4. Now Press on Influences Button.
    Here you can see that the Transaction Code - Change number is mandatory for CA01 and CA02.
    But not for CA03
    Remeber to press enter after inputing the Transaction codes, otherwise those will not apper in influences..
    Try this revert for further discussion.
    Regards,
    Siva

  • Text Mandatory only for Certain Materials in Sales Order

    Is there anyway so that I can make certain item text mandatory only for certain materials?
    I tried creating new item category group and new item category. And then create new Text procedure making this text mandatory and assigning to this new item category.
    But there are lot of different types of item categories assigned. So it does not look good to create new item category for each and everyone for this new item category group and material.
    Please guide me how to make the document incomplete for certain materials only when one text is not filled at item level
    Thanks in advance

    Hi,
    what you tried is correct and that is been followed in most of my projects wherever I worked.  That is the best way recommended also.
    If you try with incompletion procedures for item category also, you will endup doing multiple item categories anyway....
    First when I looked at the subject line, even before I opened your POSTING, I got the same resolution as you did....May be the optimal one but, not sure, if something else is possible other than by doing user exit.
    Regards

  • Source list mandatory only for scheduling Agreement

    Hi Gurus,
    My client wants to make source list mandatory only for scheduling agreement. While creating scheduling agreement for a particular type and saving it should be mandatory. But for Purchase orders and contracts this is not required. If i do it through OME5 then it becomes mandatory for PO and SA both. Also if i set in material master it becomes mandatory for both.
    Please let me know if there is way to do it.
    Thanks and Regards,
    Yuvaraj

    It doesn't make too much sense, but... do you want to be sure (garantee) that the source list has been created and it is relevant to MRP when you have a schedule agreement? perhaps you can use a user exit when you save the schedule agreement to create the source list.
    There is no standard functinality that's allow you to requirer the source list according the po type.
    regards.

  • In ME51N need to make Purchase Org. as mandatory only for selected one

    Dear guru's
    While creation of Purchase requisitions (ME51N), I need to make Purchase Org. as mandatory only for selected one Purchase Org. out of say 10 Purchase Orgs.
    Is there any userexit or workaround for this.
    Thanks in advance,
    With regards,
    Harisha

    Dear Harisha,
    One way is to define a transaction variant with SHD0.
    http://help.sap.com/saphelp_webas620/helpdata/en/eb/5fab41d79b11d296190000e82de14a/content.htm
    In the SAP Reference IMG, you can create transaction variants. Choose Basis Components -> Application Personalization -> Tailoring of Application Transactions -> Configure Transaction-Related Display Values for Fields (Transaction SHD0). Transaction variants allow you to preset values for fields in a transaction, set field attributes, or hide entire screens.
    To execute a transaction variant, you define a variant transaction using the Transaction Maintenance transaction (SE93).
    Once you have entered a transaction code and short description, choose transaction type Transaction with variant (Variant transaction).
    To define a variant, enter the name of the transaction and the name of the variant. You can then use the new transaction code to start the special variant of the transaction.
    or
    In IMG under
    Materials Management -> Purchasing -> Purchase Requisition -> Data Screen Layout at Document Level.
    Hope this will help.
    Regards,
    Naveen.

  • ECM-Problem with Change number in CS01 and CS02 Transactions

    Hi Experts,
    I am creating or changing BOM's using above transactions. I am entering the change number while creation and changing the BOM to track the changes.Here my problem is these transactions are not validating the ECM number.
    If you enter any value in the change number filed system is allowing me to create a BOM.
    I am assuming that becasue of patches applied to system,I am getting this.
    kindly help me out on this issue.
    Thanks in Advance,
    Regards,
    Rakesh J
    Edited by: J.Rakesh on Apr 22, 2009 10:26 PM

    Dear Mangalraj,
    Thanks for your reply.
    We are not using CC01 transaction to create Change number. Z transaction is there to create change number.
    My change number contain alpha numreic charectors Eg : 341793ABCXYZ
    Yes, in CS01 system is accepeting any value that we enter :Eg: asddfgh. The value is not there in AENR table.
    I observed one thing If I am going to chnage a material using MM02, there its not accepeting any value,its accepeting the values which are there in AENR table otherwise its giving error :Change Number XXXXXXXX does not exist.
    My question is same thing should function in CS01 and CS02, why its not happening for these transactions.
    Regards,
    Rakesh J

  • Lion administrator setting changed to read only for file sharing. Now hung machine

    I was trying to network my Mac with a WIndows 7 machine and tried to have my name in the file sharing read write instead of other users such as administrator   when I changed the administrator to read  only for file sharing rights and could not add my name as a file sharing user with read write permissions Really silly move
    I have performed a repair of disk permissions however still hung.
    Whats worse is that my time machine for the last three days has been disconnecting when backing up leaving a partially complete backup. Backup failed. I also left a apple support community message a few days ago to solve it.
    So its critical
    Timely HELP is needed.

    This same problem happened to me, all the sudden one day my mac decided to revert to the original standard root username and password which I obviously did not know. In order to change this:
    1) Activate single user mode on reboot as by pressing cmd + s as your computer starts up. Make sure you do it right away, and keep the keys pressed down.
    2) Where the cursor pops up, type exactly
    +/sbin/mount - uw/+
    3) When the next cursor pops up type exactly
    passwd
    4) Then you can type any password you want (now changing the root password to be what you want)
    Note you will not be able to see what you type, but the text is being recognized
    5)The computer asks for you to retype the password, retype it
    6) Type reboot
    Once the computer restarts you can navigate to system preferences>accounts> and then unlock the account (lock is located on the bottom left corner) using Username: root and the password you just set. Henceforth, you can appoint your account as the administrator. Hope it works!

  • Master Page updated , but changes are visible only for that Page(site) alone ?

    I updated v4.master in SharePoint designer to add a bread crum navigation control
     <div class="BreadCrumbWrap s4-notdlg"> 
           <asp:SiteMapPath runat="server" SiteMapProvider="SPContentMapProvider" id="ContentMap"   CssClass="BreadCrumbStyle" PathSeparator="&gt;"> 
           <CurrentNodeStyle CssClass="BreadCurrentNode" /> 
           <PathSeparatorStyle CssClass="BreadPathSeparator" />   
            </asp:SiteMapPath> 
          </div>
    But the changes are visible only in that site. all other sites dont have bread crum control,
    I added the bread crum in header section, and also in page layout section, but there is no change (bread crum navigation only visible in that site alone)
    Why ?
    I always thought master page edits will be visible in all sites of a site collection,
    Am i going wrong some where (My site collection has about 30-35 sites, and new sites are created every now and then )
    Please help
    rn

    If the publishing features are turned on then the master pages for all the sites in the site collection are pulled from the master page gallery of the root site.  But if Publishing hasn't been enabled then each site uses the v4.master in its own master
    page gallery.  It sounds like you haven't enabled the Publishing Infrastructure site collection feature and Publishing Site Feature in the root site of your site collection.  
    Paul Stork SharePoint Server
    MVP Senior Solutions Architect: BlueChip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • PR mandatory only for few PO document types

    Hi SAP Gurus,
    Issue being faced in a support project.
    A buyer is authorised to create 5 different PO doc types. Requirement is to make for only 2 PO document types PR is mandatory. Need immeidate inputs. Any suggestion without implementing user exists is highly appreciated.
    Regards,
    GM

    The field can not be made a required entry in ME21N. However you
    can use "Function Authorizations" (OMET) to restrict the user to only
    order with reference to a purchase requisition.
    As both the "agreement field" and "purchase requisition" fields are
    reference fields they are populated when created in reference and thus
    the system would not accept attempting to make them a mandatory field.
    Please use the OMET transaction and the PID EFB to accomplish your
    desired functionality.
    I have also attached note : 664424  'Requisition number not mandatory in
    ME21N' which contains further information regarding this functionality.
    I hope you find the note useful together with the information i have
    given you!!\
    This will make for all document types...........I guess you cannot do this for different document types

  • Transport request for table changes is asked only for first row changed

    Hello,
    We have created a maintenance dialog connected to a custom table.
    In the Table Maintenance Diagog, the <i>Dialog Data Transport Details</i> is set to <i>Standard Recording Routine</i>.
    In the "Maintenance Objects" screen, the transport is set to "Automatic transport".
    Two questions:
    1. Now can I only change the table's entry through SM30? I do not see the "pencil" icon in SM11 or SM16 anymore. Is there a way to change the table's rows in both ways?
    2. When I change a row in my table through SM30, the system only asks for the CR number the FIRST time that I savea changed row. When I change other rows and save them, it does not ask for any CR that I want to use for transport. Does it mean that the system automatically knows where to put the transported rows? or that the configuration is wrong and the other changed rows will not be taken into consideration? What if I want to change the CR for only some of the changed rows?
    Thank you very much every expert here

    HI,
    The table should be Customizeed table, i mean in the Attributes of the tabl eput it as C,
    1) We can change/Insert the records from SM30, we can not ahve the pencil icon in SE11 or SM16
    2) If you put the table type C, then for every entry it should ask the CR, if not then it is moving to the same request automatically
    Regards
    Sudheer

  • Change number / date format for the user at run time

    Hi,
    Can I configure a report in Oracle Answers to display a column in a particular format for one group of users and a different format for another group of users?

    Hi,
    Yes this is possible.
    In the BMM layer duplicate column which is to be formatted for different group of users. And pull it into the presentation layer.
    Suppose Column 1 for the Group 1 users
    and Column 2 for the Group 2 users
    In the presentation layer, double click on the column and give permission for the column 1 for the group 1 users and group 2 users for column.
    First create a report with all the desired columns with Administrator or Presentation Server Administrator Role. And format the columns according to the different group of users.
    In, NQSConfig.ini change the parameter PROJECT_INACCESSIBLE_COLUMN_AS_NULL which is under security section. By default it is set to No. Set it to yes. And restart the services.
    Now logon with the group 1 users and you can see only the column1 and when logged on with group 2 users, you can see the column2.
    And will solve your problem.
    Please let me know if you need step-by-step process for solving.
    Please award if you found this useful/helpful
    Regards
    MuRam

  • File Association: "Change All" working only for recommended programs

    Hello,
    I am having problems with the "Change All" function in the Finder. I only seem to be able to make a change to a program which is already recommended in the drop-down menu. If I use "Other..." and select the program and then select "Change All", it automatically reverts back to the Default setting.
    As a concrete example:
    I want to open all .tiff files with Acrobat Pro 7.0, the default setting is Preview. If I select Acrobat and click on Change all, I get the standard verification dialogue. However as soon as I confirm, the drop down menu switches back to Preview. Instead, if I select Photoshop (which is already in the drop down menue) I can make the change without problems.
    I tried to restart and I even manually edited the "launch services" plist file - changing to Photoshop works after restart, changing to Acrobat is ignored.
    File vault is off. Repairing permissions was also without success.
    Would anyone have an idea how to fix this?
    Best regards,
    Mark
    System: Powerbook G4 Aluminium / OSX 10.4.11

    Unfortunately, there isn't always a way around this. PDF files are an excellent example. A PDF file created by Adobe has a Creator of CARO and a Type of PDF_. Preview has a different Type and Creator code for PDF files created with it.
    So what happens is when you assign (say the Adobe Reader) to Adobe PDF files, it associates them with those based on Adobe's Type and Creator codes. That usually means PDF files created with Preview will still open in Preview.
    If you associate Preview PDFs with the Adobe Reader, then the OS breaks the link to the Adobe Type/Creator codes. Now Preview PDF files will open in the Adobe Reader. But since the Adobe created PDFs are no longer linked to the Reader, the OS opens them in the nearest default program, which is Preview.
    You end up with an unwanted one-or-the-other problem.

  • PA30 change use costcenter only for secundary postings inIT0001

    We use mini HR in a FI/CO system (no payroll) . We would like use costcenters, witch are only allowed for secundary postings. When we use such costcenters we get an error message:
    KI260 Cost center 1000/xyc blocked against direct postings on 01.01.2009.
    What can we do ??
    Harald

    Hi,
    Then unblock the cost center using KS02 t.code. Go to KS02, select master data, then select the control TAB,.
    Or go to OKEON, here also we can unblcok the cost center.
    Good luck
    Devi

Maybe you are looking for