Change number mandatory Routing for a particular Plant

Dear All,
i have requirement to make change no field mandatory for only one plant. this field should not be mandatory for other plant. I tried with OP5A tcode, using plant as influencing field, change no as modified field and content as plant no. so its working but,
it doesnt work for the 1st time execution. from 2nd time only its working. like this user will be able to make the changes without change number in every login 1st time.
So i set the plant as user parameter in user profile and made it working. but its not full proof soluton. can any one suggest some solution??
please suggest.
Thanks & Regards
Vinay
Edited by: vinay upadhyay on Sep 7, 2009 9:46 AM

Hello Santosh
The change number requirements on CS02 is controlled by the authorization object C_STUE_ROH.
Note 420878 provides more information about this scenario.
Check the relevant information provided on the note below:
Symptom
In Customizing of the BOM, the history requirement is set or a BOM requires a history. Despite this, it is possible to process BOMS without engineering change management. The system only processes a warning message (29 045) which can be skipped.
Additional key words
CS02, change number, OS27, W045(29)
Cause and prerequisites
Authorization profile
Solution
Check the authorization profile of the respective user.
Example:
         C_STUE_NOH <OBJ>
            &_SAP_ALL    <AUT>
                NOHIS      <FLD>
would have the authorization to process BOMs requiring history without a change number. In this case, if you change '*' to ' ' in NOHIS, you will no longer receive a warning, but rather an error message.
BR
Caetano

Similar Messages

Change number mandatory only for CS02

Hi Expert,
         I want to mandatory the change number only for CS02. I have refereed scn discussion but i am unable to make mandatory the change number.
Refereed comments:
how to make the Change number field in CS02 transaction
A basic SAP Engineering Change Management Setup
ECM Change no Mandatory for CS02 | SCN
Kindly suggest how to make mandatory the same.
Regards,
Santosh Sharma

Hello Santosh
The change number requirements on CS02 is controlled by the authorization object C_STUE_ROH.
Note 420878 provides more information about this scenario.
Check the relevant information provided on the note below:
Symptom
In Customizing of the BOM, the history requirement is set or a BOM requires a history. Despite this, it is possible to process BOMS without engineering change management. The system only processes a warning message (29 045) which can be skipped.
Additional key words
CS02, change number, OS27, W045(29)
Cause and prerequisites
Authorization profile
Solution
Check the authorization profile of the respective user.
Example:
         C_STUE_NOH <OBJ>
            &_SAP_ALL    <AUT>
                NOHIS      <FLD>
would have the authorization to process BOMs requiring history without a change number. In this case, if you change '*' to ' ' in NOHIS, you will no longer receive a warning, but rather an error message.
BR
Caetano

Change number mandatory for display routing

Hello friends,
Through OP5A I hade made the change number field mandatory for routing.
System ask for change number while changing or creating the routing.
But my question is system should not ask for change number during display routing. ( If a item had gone through many changes during a period. By default system should take latest only)
Is there any way? or some development is required
Thanks in advance
Maruti

Hi,
This requirement is genuine but liitle tricky..
Follow th procedure as below:
in OP5A:
1. Double click on PP Task Lists. Do not select the Change Number mandatory there.
2. Click on Influencing Button
3. Double click on Transaction Code:
Here, select the "Change No." as required and in the Contents filed, put CA01 and Pres Enter.
Afterwards put CA02 and Press enter.
4. Now Press on Influences Button.
Here you can see that the Transaction Code - Change number is mandatory for CA01 and CA02.
But not for CA03
Remeber to press enter after inputing the Transaction codes, otherwise those will not apper in influences..
Try this revert for further discussion.
Regards,
Siva

ECM change no mandatory only for specified Plants in CA01 and CA02

Dear All,
I am in the process of activating the engineering change management for BOM and Routing.
I did the necessary setting to work ECM.
Now my problem is we have different plants and the ECM has to be activated only for 2 plants.
To make change number mandatory in CA01 and CA02 for these 2 plants. i followed the below steps.
IN T CODE OP5A- PP TASK LIST INITIAL SCREEN - CHANGE NUMBER - CHOOSE RADIO BUTTON INPUT - SELECT INFLUENCING -SELECT PLANT -CHANGE NUMBER - ENTER PLANT - CHOOSE RADIO BUTTON REQUIRED
Same like that I did for both plants. Even after this setting it is not allowing without change number.
Can any one help me to solve this issue.?
Thanks in advance
Ganesh

Thanks for your reply.
After giving authorizations also problem pertains the same.
Can any one tell steps followed in field selection parameters is right or wrong?
Regards,
Ganesh

Make material as a mandatory field for a particular document type in PR

Hi,
Currently we are in SAP 4.6c version. There is a business requirement for making material as a mandatory field for a particular document type of purchase requisition as they don't want the user to raise non material purchase requisition using that document type. The field for material is currently not available in the configuration for Define Screen Layout at Document Level for purchase requisition.
So could you kindly let me know the possible options to prevent user from raising a non material purchase requisition using that document type. If not could you kindly suggest me the user exits available at the time of saving purchase requisition which i could use so that we can write a code to check if the material number is entered or not. If not entered prevent the user from saving the purchase requisitions.
Also it would be helpful if you could let me know how the fields for enjoy transaction (like material,document type) can be made available for selection in the configuration for Defile Screen Layout at Document Level for purchase requisition.
All you help in the solving the above problem is highly appreciated.
Thanks & Regards
Ram

Hi,
Check below method works out for you, if you do not want to proceed with any ABAP development.
Have a custom field selection key with Material Description field as "Mandatory" and "Display" in Basic Data, Item selection group.
Assign this to your PR document type which need material as mandatory. With this you are making user to enter material indirectly as mandatory & user will not have an option of entering text which avoids indirect / service procurement.
"Material Group" option won't help as User can have default settings with some value and it updates even in display mode of field.
Regards,
Ram
Edited by: Ramprashanna S on Jan 11, 2012 11:51 PM

Limit to of devices in street route for a particular MRU

Hi Guys,
Is there any limit to number of devices in street route for a particular MRU. I heard that SAP has limit of 100 devices. Is it true???
Thanks & Regards
Vikrant

Hello Vikrant,
Please see note 357589 it has some relevant information for you.
Hope its helpful.
Regards
Olivia

Opening and closing balance for Excise duties for a particular plant

Dear Experts,
Please suggest how I can get balance of excise duties for a particular plant at a given date in registers(RG23A & RG23C PartII).
Thanks
Lokesh

Dear Lokesh,
Just find the Google with "J33_BPP_32_CHEM_EN_IN" you will find the Word document for standard SAP document
With all the steps in details

How to get list of customers for a particular plant.

Hello All,
I have a requirement of the customer aging analysis report where I need to get the details of the customer for a particular plant.I have searched the tables T001w and Kna1 but found no result for my requirement.can any body tell me how to solve this issue or tell me any tables which give the information regarding the customers based on a particular plant.
Regards,
Pavani.

Thank u all...for the reply
But while creating a customer in XD01 we are not maintaing any plant data in that we are just giving the sales area data and the company code data in the initial screen. A particular customer can be used for any no of plants in our organisation than in that case how is it posible to get the data for the required plant.Here the plant is not same as the customer or vendor.
Regards,
Pavani.
Edited by: Pavani Rayappureddi on Mar 16, 2009 4:19 PM

Sale Orders and Delivery Orders for a Particular Plant?

Hi,
Could you please tell me which tables or reports are to be used to
find
a) Sale Orders for a particular Plant
b) Delivery Orders for a particular Plant?
Regrds,
Binayak

You can see sales order for Particular Plant by using VA05, in that report you can find plant column. On that column you can sort out.
In Vl06 you can find the deliveries according to the Shipping point. Each shipping point is assigned to plant. So, indirectly you can find the delivered orders from the shipping pont and plants
Reward points if it is helpful

Can we change the organisational unit for a particular position?

Hi Friends,
Can we change the org.unit for a particular position?What is the procedure?
Thank you very much..
Sai

Hi sai,
I m not getting your question, Can u pls elaborate this one.
This thread has been marked as answered, u can start a new thread for the same.
Regards,
Tomesh
Message was edited by:
Tomesh Sahu

Transaction for data particular plant number from BW to APO is not loaded

Hi gurus,
Transaction for data for particular plant number from BW to APO is not loaded . I checked the transfer rules and update rules there is no restrictions for this plant number. pls help guys.
Regards
shekar reddy

Hi Shekhar,
What is the mechanism you are using to export data (APD, Open Hub or any other)?
Check if the data is getting extracted in the proper source in BI system itself.
Regards,
Durgesh.

Cancel ECN in BOM & remove change number in Routing

Dear Gurus,
I have 2 questions about ECN , pls. help .
1> If we made a wrong ECN in BOM with change number, pls. advise how to cancel this ECN in BOM.I tried to delete the change record in CC02 but it's not allowed since BOM has been changed already.If I made a new change in BOM with new change number, in BOM it will show a new change number, but I don't want to show these change numbers because it should be no changes happen, pls. advise how to recall the change and remove the change number in BOM .
2> We use change number when we change routing ( CA02) in the past, now due to some internal issue, we want to remove all change numbers in routing, I can't find any option in CC02 or CA02, pls. advise is it possible to remove existing change number?
Thanks & best regards,
Tina

Dear Tina,
In my understanding you may not be able to delete the change number assignment made in BOM or routing.
But you can define an alternative date for the made changes and set the valid from date as say 31.12.5555.
Check and revert.
Regards
Mangalraj.S

Error in printout for mb1a movement type 221 for a particular plant

Hi All,
While printing through MB90 for the material document which processed through MB1A and movement type. The following error is appearing for only one particular plant , i am getting the following error.
Text ID F14 language EN not found
Message no. TD600
Diagnosis
You want to read a text which does not exist in the data base (or update memory).
System Response
Reading could not be carried out.
Procedure
You need to create this text:
1. Initialization (module INIT_TEXT)
2. Save (module SAVE_TEXT)
Please send me any solution if any gets same error.
Thanks,
Suresh.

Hi Bijay,
Thanks for your relpy. I tried to add the plant and storage location, I am getting the below error.
Entry LT91 does not exist in TSP03 (check entry)
Message no. 00058
Diagnosis
Input values must be defined in Table TSP03. The value or values 'LT91 ' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
Thanks,
Suresh.

Allowed Movement types for a Particular plant..

Hi All,
Please let me know is there any option available in SAP to configure the allowable movement types for particular plant ?
Most urgent
Thanks
Chandru

Did you ever find a way to do this? We have a similar requirement that we want to allow some of our users to use movement type 501 but not all. We would also like to restrict another movement to only be allowed in certain plants within our company. Our basis person is saying that this can't be done but I was certain that it could.

Doubt about changes in the routing for the next year

Hello All,
I have a question hope for you guys to gave a brief and technical answer to me.
I have some doubts, one doubts is in the actual routing, can I change the Valid to ( Date) in the routings in the operation. (Example. original valid to date is 31.12.9999 i want to change this with 31.12.2007). Because we want to create new routing with changes for the next year. But it´s necessary the new routing is valid from 01.01.2008 and valid to 31.12.2008.
And I can´t 2 routings with the same valid for 01.01.2008
I have many routings for change and I have other option like change the status (create or release).
Other doubt, the user has a excel file with the changes necessary, how can I upload from excel file to SAP R/3. It exist one program, one procedure u other option.
Your kind response is what am ex[ecting expert. Thanks,

Hi
pl use the ECM functionality (engineering change functionality) for the same..its standard SAP and no need for any special config..
You can channge the same routings by giving the effectivity date in ECR (eng change request)
for creating an ECR pl follow the below steps
=Create Engineering change request - TCODE - CC31
=Click on object type after entering this screen parameters
=Click on status management
=and change status by clicking on Check request
=Select the required objects types to be changed and click on objects to reach the below screen
=Enter the required objects to be changed via selecting appropriate tab.
=Select the object and click on details
=Click on status management
=Go to Header and click on status
=Change the status by clicking upto convert request.
=Click on the save button and Engineering Change Request has been created..
IMP Notes -
Do close and Release the Engineering change request after doing the appropriate changes at both Object level and Header Level
Pl come back for any further clarifications..
rewards will be appriciated if found useful
BR
Sumit

Change number mandatory Routing for a particular Plant

Similar Messages

Maybe you are looking for