Change Number Range of Material Document

Hi Guru,
We have a requirement to change material document number range that depend on movement type.
I have check in SPRO and read some document for material document number range.
I understand that this is a standard SAP.
- GR from PO or Order         Number Rage will be 5000000000 to 5099999999 and Fiscal Year
- GR Other, GI, Transfer      Number Rage will be 4900000000 to 4900000000 and Fiscal Year
My question is Can we change this number range?
I guess that we have to implement BADI or User-Exit to determine new number rage but I don't know how to do this.
Please kindly advice or guide me.
Thank you very much.
Saiyaman

Hi,
Insted of Movemen ttype you can asign seperate number range to a transaction code follow the process as below
   First u need to create seperate document type in OMR4  or OBF4,   then create a new number range in OMBT  assign your new number range to new created document type then in T. code OMBA  assign new created document type to the transaction code  so whenever u will create document with this Transaction code u can get new number range.
regards,
  zafar

Similar Messages

  • OMX4 - FBN1 - Number range for Material document and FI document

    47 - is for FI document number range in Material ledger FBN1.  OMX4 gives number range for Material document.  My question is how big the number range must be?  Since thousands of Materials involved, I couldn't imagin this?
    Anybody knows, how to determine the size of no. ranges in Material Ledger configuration?  SAP simply says, check no. ranges whether it meets the requirement....
    I don't expect an answer again, just check your business, how many transactions would be in a period, which is not quantifiable now?
    I would like to understand this from somebody's experience of using insufficient or excessive no. ranges, especially in this area.
    Cheers,
    Ashok

    What is the number range you are using? Year Dependent or Independent?
    When you don't know the document number consumption pattern you should use Year dependent number range in both OMX4 & FBN1. Observing this for a month will give a rough Idea and observing for a Quarter will give you a fair Idea and the result for a year gives almost near to accurate consumption of number ranges.
    The generation of documents is dependent on the number of materials and Profit centers involved. As much as possibe use Summarization at profit center level when posting to FI. This will reduce the number of documents and line items that are getting generated.

  • Number range for material documents

    Hi SAP Gurus,
    Can anyone please advise if we can reset number range for material documents once it reached to last number for existing number range ?
    Thanks & Regards,
    Manoj

    Hi,
    If material numbering  reached to last number for existing number range, you can create Number Range Text Group and assign to your material type in following path
    IMG -> Logistic ->General -> Material Master ->Basic Settings ->Material Type ->Define Number Range for each Material Type
    OR
    T.code:MMNR
    Lets example you have now:
    Number Range Text Group:01
    From Number:     1
    To Number     :19999999
    Now you can create Now One Number Range Text Group
    Number Range Text Group:02
    From Number:20000000
    To Number     :29999999
    Now assign Number Range Text Group to your material type in MMNR , {{by clicking group in menu, select maintaion->group->insert
    Number Range Text Group:02
    From Number:20000000
    To Number     :29999999
    and save}}.
    Regards,
    Biju K

  • Number range of material document

    hello guys...
    can anybody say  that where we have to assingn the number range of material documents
    regards
    vamshi

    Thanx Rambhupal Reddy
    but still i am getting this error after pressing the green flag in VF02 , that
    " For object RF_BELEG VAMC,number range internal 01 does not exist FBN1"
    After clicking the error...i am getting
    Diagnosis
    The database table NRIV has the delivery class 'c' i.e., the SAPdefault settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing.
    Transation code:FBN1
    regards
    vamshi

  • How to setup number range for Material Documents created by goods movement

    Hi Experts,
    Good day!
    Would you know what table or transaction code we could setup or configure the number range for Material Documents number created by goods movement?
    Thanks. Have a wonderful day!
    Rockz

    Hi,
    Tcode - OMBT
    Regards,
    Vivek

  • Number ranges for material document (migo) and inventory  documents

    Hi Gurus,
    We need a different number ranges for goods receipt documents  and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
    If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it  is the single transaction code used by different companies and how to give different number ranges.
    Regards,
    Sri........

    Hi,
    I think number ranges of inventory documents are on client level not on company code wise . because even though  your creating new document and assigned different number ranges for the documents but  these while assigning  ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level  not at company code level.

  • How to change number range for document type ?

    Dear All
    Experts
    How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as 
    Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
    Message no. FAGL_LEDGER_CUST093
    I have defined a leading ledger in system too with these settings
    1)     Define ledger for accounting.
    2)     Defining currencies for it.
    3)     Defining ledger group for the same.
    4)     Defining accounting principles
    5)     Assignment of principles to leading ledger.  
    Are there any extra settings required for leading ledger settings?
    I have some doubts those are :-
    How document types defined at ledger level?
    How to define them at leading ledger level?  (Like my case)
    Focus on this will be appreciable.
    Regards,
    Sharvari Joshi.

    hi ,
    The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the  number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
    coming to
    1.How document types defined at ledger level?
    2.How to define them at leading ledger level? (Like my case)
    Ans 1. please try defining document types for entry view in a ledger.
    path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
    upon prompt enter the ledger and go ahead creating the number ranges for the document types.
    Hope this helps.
    Regards
    amrutha

  • Extend number range on Material BOM item

    Hi,
    When displaying a material BOM via CS03 and looking at material tab. Each item is incremented by 10. We are currently nearing the end of this number range, ie we have a BOM which has a recipe with item number 9850. We have tested and determined that when we get to item number 9999 the next item reverts back to 0010, 0020 etc. This causes us great problems.
    Is there a way to entend the number range past 9999, ie can we go from 9999 to 10000?
    Thanks, Sinéad

    Please see the object below and change according that
    STUE       Number range BOMs                            
    STUEC      Number ranges for class BOM                  
    STUED      Number ranges for documents BOMs             
    STUEE      Number ranges for equipment BOMs             
    STUEK      Number ranges for sales order BOMs           
    STUEM      Number ranges for material bills of material 
    STUEP      Number ranges for WBS BOMs                   
    STUES      Standard object list number range            
    STUET      Number ranges for funct.location BOMs

  • External number range for GR document

    Hello,
    1.  Is it technically possible to create external number range for GR document (material document) - Note, PO is also having ext number range
    2.  Is it adviseable to create ext num range for material docs?
    Thanks
    Regards

    hi,
    1. it is possible to create external number ranges for GR document.
    in spro config settings:  use transaction OMBT and in that enter a number range and check that external number range check box.
    2. it is not advisable to have external number range for material docs --> because for every movement of the material end user has to giva an entry for material document.
    hope this may help you,
    regards,
    srinivas

  • Changing number range so that LIV and AP documnet numbers are same

    Hi Experts,
    Our client wants that LIV and AP document number should be same. As documents are already being created in production environment.
    Please advise :
    If it is ok to change number range at this stage as LIV and AP documents are already created in production environment.
    If yes then what are the things i should take care off before changing the number ranges.
    Regards,
    Kamal

    Not advisable to change the document number range at this stage, bcz there are some document which has already been posted in production environment.
    LIV # is generated by MM (when you post the invoice) which automatically generates AP document (as follow on doc) internally.
    AP always trace the AP document # and not LIV.
    For more details please read the nodes in SPRO
    MM>LIV>incoming invoice>Number assignment
    You need to be very cautious before doing this.

  • How to change number range from internal to external?

    Hi Experts,
    I have changed the number ranges for accounting document for company code (A1) external to internal and posted one accounting document using the tr.code FBN1. Now i need to revert back the changes for the number range from internal to external. i am not able to cancel the accounting document as its cancellation accounting document? please let me know any other way to change the number range from external to internal?
    Thanks & Regards,
    Raj

    Hi Siva,
    Thanks for your reply. But my expectation is any other way to change the number range from internal to external instead of going new number range (By taking any technical help)?

  • Number range of  accounting document for different plants

    whenever a billing document is created in SD (using the T-code VF01); an accounting document will be simultaneously created in the FI module. one document type(TS,number range---60:1 to 9999 ) have four  plants .different plants have own number range and sequential document number .
    eg: doc. type   num.range    fr       to           plant cty       co code
             TS           61            1        1000       PLANT_1      3100
                            62           1001    2000       PLANT_2      3100
                            63           2001    3000       PLANT_3      3100
                            64           3001    4000       PLANT_4      3100
    How can that carry out this function ?
    thank you for your help !

    Hi leung,
      As Mr.Rohit has mentioned it has to be done with the z table and the available user exit.
    Wht we have done is.we have created no ranges in obj rv_beleg.Eg
    AA   0000000001 to 0000099999
    AB   0000100000 to 0000199999
    AC   0000200000 to 0000 299999.
    Using the user exit we have created a Z table.And assignd for this ombination in the Ztable.
    Plant X   Billing type A   AA
    Plant Y   Billing Type A  AB
    Plant Z    Billing type A  AC
    Once this combination matches the appropriate invoice no range gets picked up.
    Regards,
    K.Vivek

  • How to find Change number for a Material

    Hi,
    If we know the material number and Revision level then how can we find the Change Number of that material.
    Is there any table in which i can find Change number for a revision level or is there any Function module available.
    Regards,
    Vaibhav

    Hi Vaibhav,
    Is there any table to find the change number and revision level of a material. I have change number and material and revision level coming from external system. But i need to check that with SAP whether it exists or not.
    Is there any table link to find whether a material has change number.

  • Delivery number for a material document posted

    Hi experts,
    I need to delivery number for the material document number posted,
    I tried to use the field XBLNR from the table MKPF
    but i see that the feild is empty in the case of inbound delivery
    why is it so.
    How ever i can get the data from VBFA ,but can any one tell me the reason why XBLNR is empty in case of inbound delivery.
    Thanks a lot in Advance.

    Hi,
    If you do GR w.r.t. Inbound Delivery No in MIGO then it will not update "Reference" field i.e. XBLNR.
    To update same with Inbound Delivery No, you have to do "Post Goods Receipt" from Inbound Delivery Document itself in VL31N or VL32N.

  • Internal number ranges  for accounting documents are not updating

    Dear Experts,
    We are existing user of SAP 4.6 C , are facing probelm while posting accounting document , the accounting document number ranges are not getting updated.
    When I post first document it got alloted first number from the interval when i post another document the system showing message Document Number XXXXXXX is already assigned to other document.
    And we have checked through T.C FBN1 and checked the number ranges where first document didn't showing in the alloted number range status.
    Early reply can be highly appreciated.
    thanking you.
    Regards,
    Y.Kiran Babu.

    hi Rajesh,
    check if any document exists with that number in table BKPF. Also check: the number (current number) you see in FBN1 should be the highest existing document number in BKPF (inside the range).
    ec

Maybe you are looking for