Change number that are not created earlier accepted for change of BOM

Hi,
When i am going to change BOM it gives warning message "Enter change number, BOM has history requirement"
But my problem is when i put any number in field of change number it is allowing me to change the BOM.
It should not be accept any number that are not created earlier in the system. It must have to accept change number that is created for the history requirement for perticular material. kindly give your input on this issue.
Atul

Hi Atul,
Please refer the thread ECM-Problem with Change number in CS01 and CS02 Transactions
Thanks,
Rakesh J

Similar Messages

[Desktop] Forced offers (Advertisements) are not appropriate nor acceptable for paid Spotify users.

As a paid Spotify subscriber, I reject as obviously and wholely inappropriate any advertising on your service that does not come with an appropriate level of compensation. You need to do one of the following:1. Remove them completely2. Make some easy facility to have them permanently hidden.3. Compensate the user for forcing them to view your advertisements, in the form of free service. There is no appropriate scenario where the paid spotify user is forced or coerced to view your advertisements without prior consent and appropriate compensation.

Updated: 2015-08-04Hello and thanks for the feedback!
A similar idea has also been suggested here:
https://community.spotify.com/t5/Live-Ideas/Desktop-Subscription-Let-premium-scubscribers-suppress-offers/idi-p/1176172
Add your kudos and comments there please! ;)

Can't change parameters that are not shown on initial parameter panel

I have a Crystal Report that is based on an Oracle Stored Procedure. This was created using Crystal Reports 2008, and it is published on a Business Objects 3.1 environment.
There are actually 7 parameters in the stored procedure, of which only 2 require the user to select. When the report is opened the user is asked for a date and a type to be evaluated. The report opens for a specific location, and the data associated is returned. When the WebElements submit button is hit it passes these 3 pieces of information, along with original information, new information, reason and user passing information. All of this is functioning.
The issue is when I publish the report. I set the location and do not pass it along. What I need is for the information the user does not enter to not appear on the input parameters in InfoView. I tried setting them as nulls initially, and not showing them on the parameter panel. Once these were set I was not able to change them on the second pass (with use of the submit button). Next I set them to specific values which the stored procedure looks for. That way I set them on the CMC and do not pass them. Once again this locks the parameters and I can not change them on second pass of the report. If I show the parameters and populate them on first pass, they can be changed on second pass.
Is there a setting in Crystal Reports I need to set to allow the parameters to not show on the startup parameter panel and yet still be changed?
Thanks

Hello Scott,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Purchase requisitions are not created for Component by MRP

Hi,
I have created planned orders for assy. When I run the MRP the purchase requisitions are not created by MRP for the components. If I check the planned order the components tab is showing all the raw materials list as per the BOM. The master data tab shows the BOM,Routing,Production version etc. But when I run the MRP the components planned orders/purchase requisitions are not created. There is no stocks available for the components in the plant, still the purchase requisition are not created by MRP.
I have tried in both transactions MD01 and MD02.
I could notice one thing. Supoose if I enter 31.12.2009 is the order finish date, the system creates exception mesage 10- Rescheduling in with proposed date 01.12.2009. Why the system is propsoing rescheduling in with date 01.12.2009 which past date.
Please sugest.
thanks and regards
Murugesan

Hi,
I am using MRP type PD for assy and components. There is no planned orders for assy.
If I run MD02 the planned orders created for assy and purchase requisition are created for raw materials. But if I run MRP in MD01 neither the planned orders nor the purchase requisitions created.
I tried the Control keys NETCH,NEUPL but still the planned order and purchase requisitions are not created if I run using MD01.
Please suggest.
thanks and regards
Murugesan

I created my iTunes account when I was living in Venezuela, but have relocated to the US now. How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?

I created my iTunes account when I was living in Venezuela, but have relocated to the US now. How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?
Sorry for the long 'subject'! hahaha I am new to the community. This should be fun!

No, What I mean is, Now I am leaving in USA but every time that I tried to download an app only appear app available in Venezuela no the one available in USA.
I already change my address and select USA but still I can not download app for USA

How to create a view for all Service Requests that are not approved by reviewer

Hallo,
I want to create a view in the Service Requests library that shows all SRs that are not approved. How to configure condition that says: if a SR has related Review Activity which is In Progress, show that SRs?
I couldn't find this when creating the view. Thank you.

So here's the first problem with that: Which review activity? a SR can contain multiple RAs, so how do we decide if an arbitrary SR is approved or not?
As to the specific language you use (Any child RA is In Progress) you might want to look at the criteria from the default Change approval view, which does something similar:
<QueryCriteria Adapter="omsdk://Adapters/Criteria" xmlns="http://tempuri.org/Criteria.xsd">
<Criteria>
<FreeformCriteria>
<Freeform>
<Criteria xmlns="http://Microsoft.EnterpriseManagement.Core.Criteria/">
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpressionLeft>
<Property>$Context/Path[Relationship='CoreActivity!System.WorkItemContainsActivity' TypeConstraint='CoreActivity!System.WorkItem.Activity.ReviewActivity']/Property[Type='CoreActivity!System.WorkItem.Activity']/Status$</Property>
</ValueExpressionLeft>
<Operator>Equal</Operator>
<ValueExpressionRight>
<Value>$MPElement[Name="CoreActivity!ActivityStatusEnum.Active"]$</Value>
</ValueExpressionRight>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpressionLeft>
<Property>$Context/Property[Type='CoreChange!System.WorkItem.ChangeRequest']/Status$</Property>
</ValueExpressionLeft>
<Operator>Equal</Operator>
<ValueExpressionRight>
<Value>$MPElement[Name="CoreChange!ChangeStatusEnum.InProgress"]$</Value>
</ValueExpressionRight>
</SimpleExpression>
</Expression>
</And>
</Expression>
</Criteria>
</Freeform>
</FreeformCriteria>
</Criteria>
</QueryCriteria>
This is a simple AND criteria with two componets. one looking for a Review Activity (TypeConstraint='CoreActivity!System.WorkItem.Activity.ReviewActivity') which is related to the targetting CR by Contains Activity ($Context/Path[Relationship='CoreActivity!System.WorkItemContainsActivity';
Context in this... context means the CR targeted by the view) where it's status (/Property[Type='CoreActivity!System.WorkItem.Activity']/Status$) is In Progress ($MPElement[Name="CoreActivity!ActivityStatusEnum.Active"]$). The other is filtering
for the target change request's status ( $Context/Property[Type='CoreChange!System.WorkItem.ChangeRequest']/Status$) is In Progress ($MPElement[Name="CoreChange!ChangeStatusEnum.InProgress"]$).
You could convert the second criteria to point to SRs and SR status values, and then use the similar text for the first criteria. i'd recommend
Anton's Advanced View Editor (or
the free version) to do the criteria adjustment.

H.264 export without audio creates files that are not recognized in Quicktime or VLC

Dear all,
I need to generate h.264 files with video only. (short clips for use with a "clickable" catalog on an iPad)
Used the "H.264" category and chose a preset. Unchecked "Audio" so I only get the video exported.
The resulting .m4v file is not playable in Quicktime or VLC or MPEG streamclip.
When I leave audio enabled with the same preset, the file is fine, but as soon as I export without audio, the resulting file is unreadable.
Source material is ProRes 422HQ, audio+video, about 30-40 seconds long.
Any clues?
Carl.
Mac Pro 5,1
24GB RAM
Nvidia Quadro4000
4TB internal RAID0
OS 10.7.5
Premiere 6.0.2

Thanks Jeff, I did get that far ;-)
I'm sorry, probably my question wasn't very clear. Of course I can find some technical info about the iPad...
And of course some of the presets in Media Encoder provide basic starting points for encoding.
But... there is also the first iPad, I couldn't find the specs about it on the Apple site. On everymac.com I found:
Apple reports that the iPad supports "H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats."
So if I want to be compatible with all iPads I need to probably stay under 720p30 with [email protected] for H.264
When I look at
http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC
I find (from the example values) that 1280x720@30p is quite near the maximum matrix size. So with 1024x576 I should be ok there. My bandwith of about 2Mbit is also well within range in this case. But what if I want to fill an iPod screen (1024x768) with the highest possible quality video? How do I calculate if this fits the max frame size requirements, where this is expressed in a number of luma samples and macroblocks? What is my max bandwith? The tables says that the "Max video bit rate for video coding layer (VCL) kbit/s" should be <14.000kbps. Does that directly translate to the sliders in my encoding app?
If you look in the table "AVC software implementations" (under Software encoder feature comparison) you can see that some features that are supported in MainConcept, and not supported in Qt. (8×8 vs. 4×4 transform adaptivity, Quantization scaling matrices, Separate Cb and Cr QP control, etc. What are these exactly?)
In Streamclip one can choose to have B-frames or not, in AME there is no such control. Does that mean it always encodes with B-frames? Why would one not want to have B-frames?
A lot of parameters in AME H.264 encoding seem to be set to certain fixed values that are not accessible to the user. Other programs (Sorensen, Telestream) provide the user with access to more parameters. Which parameters in AME are set to what (fixed, non-accessible) values and why?
As I said earlier, Quicktime reports different codecs for what should be the same format but from different encoders. Why? Is there a program that can analyze a H.264 stream and report about it in more detail than VLC/Quicktime?
etc. etc. etc....
If anyone could recommend an online resouce or a book to learn more about the ins and outs of H.264 encoding/decoding that would be great. I have the first edition of Charles Poynton's (brilliant!) book "Digital Video and HDTV", which does talk about MPEG-2 but not H.264. I saw that the second edition goes a bit more into detail about H.264. Does anyone have the second edition? Worth buying just for the relatively small addition about H.264?
Thanks.
Carl.

Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?

Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?
Thanks!
-Adrian

the old apps are on my computer but they have had upgrades since they were put on the ipod originally. you think you would get a warning about this when you restored. I was not worried about losing the progress of the apps but i would have been worried about the app it self!!!!!

How do I create a smart playlist of songs that are not in any playlist?

I have zillions of songs and many playlists to manage them. So how do I create a smart playlist that shows songs that are not in any playlist?
An easier answer would be " Playlist > is > None" but this option is not available.
Any other creative solutions?
(...and a long list of "Playist > is not > Playlist AA" through "Playist > is not > Playlist ZQ" is not a manageable answer as my playlists are too dynamic for that. Such a playlist would always be broken.)

Maybe one of these will help:
This AppleScript will create a text file that will list the iTunes Library tracks which have not been assigned to any playlist. http://dougscripts.com/itunes/scripts/ss.php?sp=notinanyplaylist
This script searches your iTunes or iPod Library for tracks which have not been included in any Playlists and copies them to a new discrete Playlist. http://dougscripts.com/itunes/scripts/ss.php?sp=notinanyplaylistplaylist

Getting dollers that are not the inventory acct changes.

Hi fnds,
In my requirement. iam sending data to CMIS.but in that invtry_cost_paid field is not getting proper currency.here we are getting dollers( USD ).what i find out is getting dollers that are not the inventory acct changes.
In this code they did not use any convertion function module.
Then where we have to change the code.
by

use this FM at the right Spot.
CONVERT_TO_LOCAL_CURRENCY
CONVERT_TO_FOREIGN_CURRENCY
CALCULATE_EXCHANGE_RATE
READ_EXCHANGE_RATE
A

If I have 500+ songs that are on my iPhone and I change the Apple ID in setting will I lose my songs that are on my phone (not icloud)

If I have 500+ songs that are on my iPhone and I change the Apple ID in setting will I lose my songs that are on my phone (not icloud)

KTtuckett wrote:
Have you done this yet, I have the same problem but I need to know if it worked for you without loosing anything
You will not lose anything by changing the AppleID on your iPhone.

BAdI: Field LIFNR not ready to accept input (Change will not be adopted)

Dear Guruz...\
given below is the warning with message number
BAdI: Field LIFNR not ready to accept input (Change will not be adopted)
Message no. MIGO050
while i am trying to enter the batch name for removal for scrapping and clicking check this warning is being displayed.
KIndly if you are having any other solutions in customizing other than using BADI... pl discuss..

Hi,
You must have some kind of BAdI (probably MB_MIGO_ITEM_BADI och MB_MIGO_BADI) that places a value in the field LIFNR (vendor). However, this field is not open for entry and hence SAP ignores the value provided by the BAdI.
Either correct your BAdI so it doesn't populate the field when the latter is not available (e.g. based on the mvt /special stock ind.) or live with this warning message - it is harmless.
BR
Raf

HT1296 I have a problem synching calendar data between my iPhone 3GS iOS 5.1 & Outlook 2007 on MS7. The basic calendar is OK but the birthdays (little box icon) are a day early & cannot be changed to the correct date. How can I fix this?

I have a problem synching calendar data between my iPhone 3GS iOS 5.1 & Outlook 2007 on MS7. The basic calendar data transfer is OK but the birthdays (little box icon) are a day early & cannot be changed to the correct date. The birthday entries in my Outlook contacts have correct dates.How can I fix this?

The following peocess corrects the calendar entry:
edit the contact & change the birthday, save the change; edit the contact & change the birthday to the correct value, save the change again. The calendar entry then displays on the correct date. Alternatively as a temp solution I can just de-select the "birthdays" calendar which stops the icon being displayed.
Thanks for your advice, I think that it's n going to be a slow process to fix all the entries for not much return.

How do I delete places in the organizer that are not being used?

In Elements Organizer 12, I think I accidentally created a "place" on the map that I do not want to apply to any photos. When I try to do conduct an advanced search, the place is appearing as a checkbox. I do not want this place to show up in the search field, as we have never been there. How do I remove places that are not associated with any photos?

If you are accessing emails from multiple devices, you are better off using the IMAP protocol. Then the devices sync with the server and they are all looking at the same information. With POP, you are going to get your emails spread about, some on Outlook, some on the iPad. It could get very confusing.
By default, the iPad will not delete from a POP server. Instructions for changing this are here: http://support.apple.com/kb/HT3228

How to select all the people that are not in any equipe ?

Hi,
I have a nice SQL expression that gives me as a result all the "AGENTS" (people) that are working in an EQUIPE (a team)
select a."AGENT_ID",
a."NOM" || ' ' || a."PRENOM" "Nom",
c.libelle "Equipe",
a."DATE_EMBAUCHE" "Date embauche",
a."DATE_DEBAUCHE" "Date débauche"
from OBSERVATOIRE."AGENT" a,
observatoire.equipe_agents b,
observatoire.equipe c
where a.agent_id = b.agent_id
and b.equipe_id = c.equipe_id
order by nom
Now, how to select all the agents that are NOT working in any "EQUIPE" (team) ?
I have tried but could not succeed !
Thank you for your kind help.
Christian

Christian from France wrote:
It is not working because the table EQUIPE_AGENTS does not contains a row if the agent is not into any equipe.
CREATE TABLE "OBSERVATOIRE"."EQUIPE_AGENTS"
(     "EQUIPE_AGENTS_ID" NUMBER NOT NULL ENABLE,
     "EQUIPE_ID" NUMBER NOT NULL ENABLE,
     "AGENT_ID" NUMBER NOT NULL ENABLE)
CREATE TABLE "OBSERVATOIRE"."AGENT"
(     "AGENT_ID" NUMBER NOT NULL ENABLE,
     "GRADES_ID" NUMBER NOT NULL ENABLE,
     "NOM" VARCHAR2(50 BYTE) NOT NULL ENABLE,
     "PRENOM" VARCHAR2(50 BYTE),
     "DATE_EMBAUCHE" DATE NOT NULL ENABLE,
     "DATE_DEBAUCHE" DATE)
The only way to "know" if an agent is not into any equipe (team) is to search into the EQUIPE_AGENTS table, and if we do not find the ID of the agent into this table, then we know that this agent is not into any EQUIPE (team).
I don't know ho to translate this into SQL.And that's what my query does. It uses an OUTER JOIN so that a result record is returned whether or not there is a record in EQUIPE_AGENTS. And the check for EQUIPE_ID is NULL restricts the result set to those where there IS NOT a record in EQUIPE_AGENTS.
A more traditional way would be to use NOT IN or NOT EXISTS clauses, but they can prove inefficient.

Change number that are not created earlier accepted for change of BOM

Similar Messages

Maybe you are looking for