Change numbering allocation t.code TRIP

You can even change the numbering sap assigned internally to the statements of expenditure (T, CODE TRIP), my intention is to alphanumeric sequential numbering
Thanks for caring

Hi Vicente Lopez
For Travel request alphanumeric sequential numbering is not possible through Standard SAP Number range settings.
Reagrds
Sri

Similar Messages

  • Change With Holding Tac code in Vendor Master in Mass

    Hi Experts,
    How I can change With Holding Tax code in Vendor master in Mass. Please let me know which transaction code or path I use.
    Thanks & Regards,
    Hemant Maurya

    Hi :
    There should be a couple of ways to finish it,and the easiest way is to execute transaction xk99,and then select the table lfbw,then click field tab,then look for  W/tax code (LFBW-WT_WITHCD),then execute,here you need to input the vendor numbers and then you will go the screen to enter the new value to cover the old one,
    Another way is to lsmw.

  • RFWT0020 withholding tax data - Data Regen vs. Change to Source Tax Code?

    Can anyone explain the difference between these two options when running RFWT0020 to update withholding tax data?  Data Regeneration vs. Changes to Source Tax Code?  I can't find any mention of the two options in the program documentation
    When I do test runs with the two different options, the program is selecting difference documents to update.  If we are just turning on the 1099 functionality now (beginning with the 2011 tax year), should I run the program once with Regeneration mode and once with Changes to Source Tax Code???
    Thanks for any advice!
    Allison

    Hi,
    he program enables the withholding tax code to be changed for reconciled and open items with existing withholding tax data. For this, the tax rate of the existing withholding tax data as well as the tax rate of the new withholding tax code must be 0%. The new withholding tax codes are taken from the customer or vendor master data. In the case of extended withholding tax, the withholding tax code is only changed if the related withholding tax categories are the same. The withholding tax base amount is not changed by this procedure.
    Recreating or changing the withholding tax data requires that the program first be executed for invoices and then executed for payments in a subsequent step.
    When you start the program, the selection screen appears. You can make selections according to vendors, tax code 1, tax code 2 (vendor master record), customers, tax code 1, tax code 2 (customer master record), company codes, document numbers and posting data. The selection determines which items are checked for possible subsequent entries in tables BSEG, BSAK, BSIK, BSAD, BSID, WITH_ITEM.
    You can also decide whether only withholding tax data is to be handled for cases where the documents in question contain no withholding tax data. There is no withholding tax data if no withholding tax entries exist for the item selected in table WITH_ITEM (extended withholding tax) or the die withholding tax fields in table BSEG are not filled.
    The selection can also be made in test mode. If you do this, no changes are made in the database. You are therefore advised to run the program in test mode initially.
    Regards
    Aditya

  • Gaps in Document Number Assignment & Invoice Numbers Allocated Twice

    In Period End Closing Financial Accounting there is Gaps in Document Number Assignment & Invoice Numbers Allocated Twice for day-end closing. I understand the difference between the two, but why is the business process procedure a process decision between the two as opposed to a process flow that includes one after the other?
    T-Codes:
    S_ALR_87012342 vs. S_ALR_87012341
    Thanks in advance for you help!

    The report is used mostly by SOX and Internal auditors to check if there are any gaps in the document number assigment. This could be possible if due to various reasons certain numbers have been skipped and document numbers are not in sequence. Also as per some of the local reporting GAAPs there hsould not be any gap in the document numbers assignment. To ensure all this this report is checked.
    Thanks and regards
    Kedar

  • How can I make a column of sums out of a repeating pattern of 24 changing numbers

    How can I make a column of sums out of a repeating pattern of 24 changing numbers in Numbers.
    I have a long list of 8760 numbers of which I need to take the sum (and store in a column) of each 24 numbers.

    Here's one way. I've reduced the example, taking groups of five numbers from a set of 20. I've used 3 as the data number in all cases to make the sum easily recognizable.
    Original column of numbers in Data::column A.
    Data::B2 (and filled down): =QUOTIENT(ROW()+3,5)
    This adds 3 to the row number, then divides by 5, returning the quotient and ignoring the remainder.
    The result is a 'group number' for each group of five rows.
    Sums of each group are reported in the Sums table.
    Sums::A2 (and filled down): =ROW()-1
    Sums::B2 (anf filled down): =SUMIF(Data::$B,A2,Data::$A)
    For your example, assuming the 8760 numbers are listed in column A of a table named Data, starting at cell A2:
    Add a second column to the table (column B).
    In B2 enter the QUOTIENT formula above, with these two revisions:
    =QUOTIENT(ROW()+22,24)
    Fill down to all cells in the column.
    Provided you have named the first table "Data", both formulas in the Sums table will be as written above. You will need to extend the Sums table to 366 rows (including the Header row) to accommodate all 365 groups of 24.
    Regards,
    Barry
    PS: For details on the functions used, see the iWork Formulas and Functions User Guide. You can download the guide via the Help menu in Numbers '09.

  • How to see the changes made in tx code MN05

    Hi all,
    Do you know how can I see the changes made in tx code MN05?
    I need to know when was The output condition updated? Do you have a change record on this change?
    Thanks and regards

    Hi,
    There is a Transaction code SCU3 to display the change logs
    Goto the Transaction code and enter the  Table for MN05 and execute, it will display all the logs for MN05.
    If you didnt find any change logs here, then you have to activate the Change logs for this table.
    To activate the change logs , goto SE11 and give the table and clcik on the technical settings and you will find the Check box with CHANGE LOGS.
    Check whether it was activated or not, if not activate it.
    Thanks,
    santosh

  • Send a mail with change history while changing the Routing (T-Code CA02),

    Hi All,
    I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
    I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
    Please suggest meu2026u2026u2026u2026
    Thanks,
    Amjad.

    Hi All,
    I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
    I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
    Please suggest meu2026u2026u2026u2026
    Thanks,
    Amjad.

  • Routing with change numbers.

    Hello friends,
    I'm trying to do the following. Can someone please explain what the problem could be
    In routing creation, there is a problem.
    Step:1 I enter the material number, plant and change number.
    Step:2 Entered the usage(1) and status (4) in the header screen
    Step:3 In the operations screen, I type in the work centre, controlkey, description and press enter
    Now, the problem is activity types related to the work centre are not defaulted into the Activitytype fields..
    However, if I don't put the change number in the initial screen and repeat the same process, it defaults all the activity types in those fields..
    What  role do you think the change number is playing? What could be the problem? We need to have the change numbers,so we can't avoid them. How do I get those activity types defaulted while having the change number at the same time? Is it I'm missing anything in the config again? Any ideas?
    Many thanks
    Shiv

    Hi,
        Check in work center if activity types are defined as parameter in Standard Value Key because activity types are copied from work center standard value key
    Regards
    Sunil Kumar

  • Change the mapping generation code from sql*loader to pl/sql

    I want to use a mapping with a flat file operator to generate pl/sql code even if a mapping generate sql*loader code as default.
    I tried to change the Language generation property of the mapping but an API8548 error message is shown. The suggested solution by OWB is to change the language generation code in the property inspector of the mapping.
    I can't use external table because I have to work with a remote machine.
    What i have to do to change the generation code from SQL*Loader to PL/SQL?

    How about breaking this out into 2 mappings? In the first mapping, map a flat file operator to an table using SQL*Loader code. Then define a second mapping using the table as source and therefore generate PL/SQL. Then use process flow to launch the 2nd map to run after completion of first.

  • Authorization for cost centers in KSV8  allocation T-code

    Hi all,
    I know it is possible to set an authorization in allocation T-code KSV8 based on the cost center. In the KSV8 transaction, there is a sender, a receiver and obviously in my case the sender is different to the receiver. The following step for me is to identify the possibility to make an authorization for the partner cost center (which is the receiver). The authorization is for the modification of the allocation. Can anyone help me?
    Thanks in advance
    Cheers
    Pascal

    To complete my question, in fact I need to identify an allocation table which makes the difference between the sender and the receiver. Tables marked "T811" are allocation tables...thanks for your help
    Pascal

  • Making ECR No. Compulsory While Changing Material BOM (T. Code CS02)

    Hi,
    In our business scenario, we want to make ECR No. compulsory while changing BOM using transaction code CS02. Process which we are looking at would be as below.
    1)     Default initial status of BOM will be set as u20182u2019 (Inactive) through customizing.
    2)     ECR No. should not be compulsory for transaction code CS01.
    3)     When BOM creation is completed, status of BOM will be changed to u20181u2019 (Active With History Requirements) by user.
    4)     When user goes to transaction code CS02 for changing BOM,
    a.     If BOM status is u20181u2019 & ECR No. is not entered, system should give error message (Message No. 29045) & should not allow user to go further.
    b.     If BOM status is u20182u2019, system should allow user to change BOM without entering ECR No.
    5)     Once BOM status is set to u20181u2019, system should not allow to change it.
    Please guide me how this process can be achieved.

    Dear Abhijit,
    If my understanding is correct then it seems you want to make change number as mandatory for CS02 alone.
    apart from the configuration settings in OS27,setting the correct value for the authorization object C_STUE_NOH,normally it will be
    made for all the T.Codes CS01/CS02.In your case you want to make it mandatory only for CS02 alone,So check in this way.
    In this case you may have to create 2 different roles,one containing the authorization only for CS01 and for authorization object
    C_STUE_NOH with Yes.
    The other role for CS02 alone for the authorization object C_STUE_NOH with value set for No.
    The same user should not be containing both these roles.(for Roles creation check with your admin consultant).
    check whether this can help you.
    Regards
    Mangalraj.S

  • Changes of the ZIP Code for the sales organization

    Hi All,
    I have done the changes of the ZIP Code for the sales organization by using the t code ovx5  the change of zip code in adress but when i rechek the changes in the order acknowledgement output there i can see the old zip code only.
    Please help me how to make the change the zip code to SO, so that i can view that in output.
    need to update pls help..
    Thanks for help
    Raj.

    Hiii
    Check weather your developer hardcode the sales organization pin code: else check the logic weathe Sales org Pin Code is getting from following logic. Go to table TVKO and put ur sales org number in VKORG field  then execute
    Get the ADRNR number and pass the same in ADRC table and get the POST_CODE1 as pin code number (give same logic to your abaper)
    Regards
    Shambhu Sarkar

  • IDOC Type for Tcode CC01 and CC02 (Create / Change Change Numbers)

    We are trying to integrate Change Master from a 3rd party system to SAP R/3 4.72.What is the IDOC Type for Tcode CC01 and CC02 (Create / Change Change Numbers)

    Thanks...
    We have looked at this IDOC Type. However we are not very sure how the components (Material/BOM etc.) will be mapped into E1AEEFM segment in the IDOC.

  • Change the default country code for new contacts in Outlook 2013 for countries not listed in Control Panel Region Format

    Dear all,
    I would like to change the default country code for new Outlook 2013 contacts. My country is Mozambique (+258) and is not listed under Control Panel> Region> Formats> Format:
    Is there any place (registry maybe, anywhere) where I can manipulate the existing formats or manually add a new format to the List ??? - for example Portuguese (Mozambique).
    I am using Windows 8.1
    I have tried changing the country on the phone and modem options and nothing changes. Also changing the Home Location on Region> Location to Mozambique didn't change a thing. The only place where I change something and produces results is the
    Format List.
    Any ideias???? If not, is there a place where I can ask Microsoft to include Portuguese (Mozambique) on future windows updates???
    Kind regards,
    Osvaldo

    Hi,
    Windows uses the information set under
    'Phone and Modem'  in the Control Panel to determine the default area code.
    You can change the country/region to
    Mozambique
    and set your area code here:
    Regards,
    Steve Fan
    TechNet Community Support

  • Change ABAP Program return code

    Dear ABAP Gurus,
    I need to change internal return(message) code inside APAP program (report).
    Program starts  as the first program in a scheduled job with several programs in, and we want to have the following  programs do not start in some cases which are evaluated in the first program. Normally program ends will internal return (message) code 0000. I need to change this return code.
    Thank you very much,
    Svetlana

    Hi Svetlana,
    Can I suggest a solution that is closer to standard?
    You could schedule your job with only the first program due to run.  If it runs sucessfully, it will programatically submit a new job with the next abap program to run, and if not, it write a log (spool, or messages).
    How does that sound?
    If your first program is a standard program and you don't wish to modify it, you could schedule your job with the standard program first, followed by a custom program that could determine the sucess of the first (by checking database entries, or by reading the spool of the first program, etc.) and then it would submit the subsequent jobs (or not).
    Hope that helps.
    Brad

Maybe you are looking for