Change NWA language for single user

Hello, gurus!
The question is stated above: how can I change NWA interface language only for single user?
Users in our BPM system are fetched from Active Directory therefore I cannot change (as they advise) user for my user from NWA. It is inactive.
Is there any other solution?

It shows that users are stored in LDAP.
Also I'd like to draw your attention to language preferences in my browser
Desirable language (English) is specified as recommended in guidelines, but NWA nevertheless is showed in Russian as you can see.

Similar Messages

  • Changing Default language for all users

    Hi ,
         We have upgraded EP 6.0 to EP 7.0  . After the upgrade when users are logging into the portal default langauge is being set from the browser .
         I want to set the default langauge to  EN for all the users. My prtDefault.properties file already contains following entry :
    This is the default language to be used when none is specified
    request.defaultlanguage=en
    request.defaultcountry=us
    Do I also need to ADD
    request.mandatorylanguage=en
    request.mandatorycountry=us
    properties in this file ? Please suggest.
    Regards,
    Ganesh

    Hi Ganesh,
    Can u pl post how you solved this.
    Regards,
    Reema.

  • Changing English language for all users

    Hi experts
    I want to set the English langauge to Spanish for all the users, can someone tell me how to do please?
    thanks!!  

    Hi Biroj
    thank you very much for your answer, I solved the problem and I found the file with your help.
    thanks!
    Edited by: lizcam on Aug 24, 2010 11:05 AM
    Edited by: lizcam on Aug 24, 2010 11:06 AM

  • Acrobat Reader 11 MUI : Impossible to change Language for Final user.

    Hello,
    I need to deploy AdbeReader on several PC.
    On my enterprise, we have several language (english, french, deutch...)
    I have configure MSI package with Adbe Customization Wizard. But on this tool we cannot choose "Set the language to the OS language..." By defaut, I choose English.
    I have read on Adobe Reader document that by default, for MUI, we need to put 1 to this reg key :
    HKLM\SOFTWARE\Adobe\(product)\(version)\Language\UseMUI\
    In my case, it's ok.
    But, when I install Adobe Reader with my mst file, application stay in english (even if I use a french computer).
    And, if I try to change manually the language it does'nt works. Choose at application startup does'nt too. I have never the popup to choose the language.
    Someone can help me ?
    Many thanks !

    Adobe Properties — Enterprise Administration Guide
    Language    11 & later    SUPPRESSLANGSELECTION    MUI installers only. The default of 1 does the following:
    Sets the language to the OS language for all users.
    Disables the language selection dialog on application startup for any user.
    Sets HKLM\SOFTWARE\Adobe\(product)\(version)\Language\UseMUI\bUserMUI to 1
    This is particularly useful for multiuser installations where the language selection dialog would normally appear if a different user logs in, Citrix installations, and so on.
    A value of 0 results in the language selection dialog appearing at first launch for every newly logged in user of the machine. For Acrobat this property is not applicable. When Acrobat is installed with MUL serial number and LANG_LIST=ALL, the launch language would be the same as OS language unless a language transform is also applied.

  • Changing the default keyboard language for all users via command line

    I have about 250 computers, that I set the wrong default language on.
    I am hoping someone here can help me. I have 3 keyboard languages installed in my labs,
    En-English (United States)
    Fr-French (Canada)
    En-English (Canada)
    I'd like to make the Fr-French (Canada) the default keyboard language for all users that login I have tried the following xml but it's not working. I do not see the problem any help would be appreciated.
    I tried to run it by doing this
    control intl.cpl,, /f:"FR-DefaultKeyboard.xml"
    The following code below is called FR-DefaultKeyboard.xml file.
    <gs:GlobalizationServices xmlns:gs="urn:longhornGlobalizationUnattend">
    <!--User List-->
    <gs:UserList>
    <gs:User UserID="Current"/>
    </gs:UserList>
    <!--User Locale-->
    <gs:UserLocale>
    <gs:Locale Name="FR-CA" SetAsCurrent="true"/>
    </gs:UserLocale>
    </gs:GlobalizationServices>

    <gs:GlobalizationServices xmlns:gs="urn:longhornGlobalizationUnattend">
    <gs:UserList>
    <gs:User UserID="Current" CopySettingsToDefaultUserAcct="true" CopySettingsToSystemAcct="true"/>
    </gs:UserList>
    <gs:InputPreferences>
    <!--English US EN-->
    <gs:InputLanguageID Action="add" ID="0409:00000409" Default="false"/>
    <!--French CA CA FR-->
    <gs:InputLanguageID Action="add" ID="0c0c:00000c0c" Default="true"/>
    <!--English CA EN-->
    <gs:InputLanguageID Action="add" ID="1009:00001009" Default="false"/>
    </gs:InputPreferences>
    </gs:GlobalizationServices>
    This worked, thank you

  • How can I change the password for the USER in SAP.

    How can I change the password for the USER in SAP?
    also I want to change the Language and  date Format b/c it's displaying in German language..

    Hi,
    Assuming that User has already his/her user-id and password, and now he/ she wants to change it.
    select the client and provide Log-in credentials. Now, instead of 'ENTER' there is one Tab: 'New Password' (up, left hand). Click it.
    Now, system will ask for new password to change.
    If you are asking from Basis point of view, then T.code: SU01 - User Maintenance.
    Enter User's id and Click Change icon.
    It will lead to Page: Maintain User.
    Here, Select tab: Logon Data
    There is a Sub-Tab: Password.
    Here, key-in change password and SAVE.
    For Language and Date format, contact your Basis-Personnel.
    Best regards,
    Amit

  • MACBOOK won't boot - bin/sh for single user message

    Powered up my 3 year old Macbook tonight and it won't boot.
    After some while it displayed a message saying I had to restart the Macbook which I did.
    Now (agian after a long while) it gets to a black screen then displays (twice) Diskos2: OX2103005 (Undefined) or somethimg like that as it's too small to read then
    Launched : Can't exec bim/sh for single user : input output error
    Any ideas?
    Thanks
    Dick

    Say, that does sound messed up! But so far sounds like a Hard Drive/Software problem.
    Boot from the Install CD/DVD, but do not install. Answer ONLY the "What Language" question and wait for the MenuBar to be drawn. Then Choose Disk Utility from the Utilities Menu.
    Select your Hard drive and click ( Repair ) Run it again until it comes clean or gets stuck. If stuck, write down the messages and post them here.
    It is also a good idea while you are up to do a ( Repair Permissions ). This only checks the things the Installer installed originally, but that is a lot of stuff. \[Once your Mac is up and running off the Hard Drive, you should Repair Permissions again.]
    A Mac that cannot boot from an appropriate Installer Disc has a Hardware problem.

  • I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    Go to the bottom of the page, click the flag, then select your country.

  • I cannot find how to change the language for labels in a quiz

    I cannot find how to change the language for labels in a quiz

    You have to be aware that this will only change labels if you edit before adding quiz slides: Preferences, Quiz, Default Labels. You will have to edit the labels, choosing another language will not change them automatically.

  • Change of UID for Oracle user  - Impact

    If change of UID for Oracle user in solaris will affect the database which is already running. Wil it have any impact for the databases?
    Guys please advise.
    Thnx,
    Satheesh

    Many thanks for the response. We are not changing the UID but there are some errors in the script related to file permissions. So just wanted to know will it have any impact on the database if we change the UID.

  • How can I change the language for the Quiz Results page?

    How can I change the language for the Quiz Results (labels on buttons and text labels)? Is this possible only manually each time, or are general settings possible?

    For Quiz Slides you've already added to your project file you will need to change the labels manually.  If you change your Quiz Settings and Master Slides that control the defaults and then add new Quiz Slides, THEN those slides will carry your new settings.

  • Can't exec /bin/sh for single user

    Hi,
    When I boot up my iMac G5 it sits on the gray screen with the apple and spinning "doing something" icon, and then goes to a terminal window telling me:
    "can't exec /bin/sh for single user: Input/output error"
    It started doing this last night after multiple beachball of death situations. Anyone have any ideas? Or is it time for this old machine to be put out to pasture?
    Thanks
    Mungo

    Hi Mungo,
    invalid key length is a serious issue that can sometimes be fixed by "heavy duty" utilites like DiskWarrior and Drive Genius.
    If you don't have enough room to re-install the OS, though, you have seriously overfilled it and they may not be able to deal with the problem either.
    You should always aim to keep at least 15% free space on the drive, preferably more. On my 250 Gig internal drive, for example, I see the beginning of stability and speed problems when I get down to below around 30 gigs of free space. It varies a bit depending on what you use your Mac for, but my own preference is to always aim for 50 Gigs free on this 250 Gig drive.
    You have to fix the "keys out of order" problem before you even think of re-installing the OS.
    The best solution is to reformat the drive. It is unlikely that it actually needs replacing. However I still think you should buy another drive, but an external one, if you don't have one already.
    My approach to your problem would be:
    1) Go and buy a nice big external firewire drive if you don't have one already (ideally at least twice the size of your internal).
    2) Install OSX on the external drive (You may want to partition it into two volumes first, keeping one partition to store a "cloned backup" of your internal and one for general usage, overflow storage, etc)
    3) Boot from the external HD and copy across your precious stuff from the internal drive to the external. (If you have created two partitions on the external you could use the excellent utility "SuperDuper" to "clone" the internal to the second partition - the one witout the OS installed on it)
    4) Reformat the internal drive, preferably using the single "zeroing" option.
    5) Re-install the OS and software on your internal drive
    6) Copy back your data (documents, music, movies etc) to your internal but make sure you leave plenty of free space on it. If you have a large music library , or lots of movies, for example, you might want to keep them on the external, rather than putting them back)
    7) From now on use one partition of your external drive for regular "cloned" backups of the internal and the other for general storage overflow etc.
    Cheers
    Rod

  • Init: can't exec /bin/sh for single user.....

    Has anyone come across this gem during start-up? it's outputting
    init: can't exec /bin/sh for single user: No such file or directory
    init: can't exec /bin/sh for single user: No such file or directory
    init: can't exec /bin/sh for etc/rc: No such file or directory
    This shows up after the apple logo on start-up. Any ideas?

    That message suggests that Mac OS X isn't able to open a shell or run the startup scripts because one of the items it needs is missing. Fixing this issue will require reinstalling Mac OS X.
    (11150)

  • Can any one tell me where do we have to change the Language for Vendor curr

    Hello
    Can any one tell me where do we have to change the Language for Vendor currerncy?
    Is it in the vendor master record or in the Currency settings.
    Please tell me the path or Tcode for it.
    Best Regards,
    Sairam.

    hi sai
    do you want to change the currency or langauge ?

  • Change membership for single user?

    Hi, i signed up for team membership but now realize I should have chosen membership for a single user, since it's only for me. Can I change it?

    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Maybe you are looking for

  • Changing condition type values in Billing Doc Line Items

    Hi All, I want to change the value of condition types JLST and JCST to zero in the line items of proforma invoices. How can I do this? Any function module or BAPI? Should I go for BDC?? I tried to find user exits. What can be the optimal way to do th

  • Rs232

    I won't let off the RS 232. I would like to communicate with an SPN 1 (Pyranometer). I use the Serial Port on my CRIo 9074 For the RS232 communication of the SPN 1 All digital information can be output via the RS232 port (9600,N,8,1). This can be use

  • Always "Read-only" in dimension detailed view, OWB10gR2

    In OWB10gR2, let's get any dimension open in the "Data Object Editor", then click on dimension object, right button menu and select "Detail View". The editor shows as expected, the dimension itself and the underlying table, however in the lower pane

  • Keyboard navigation with left right keys for a ring

    Hello, is it possible to use the left/right keyboard keys to control a ring? They do not appear in the keyboard-navigation properties. It has to work that way, that I can move with the keys through the ring-entries and select the desired entry with <

  • Changing Address location

    My Current subscription is in United States but i need to change it to united Arab Emirateds where i live in order to purchase the Plus package offered to me