Change of 3u00BA Local Currency

Hi all,
I need to change the 3º Local Currency of one of my company codes. In 'Define Additional Local Currencies' I am not able to change the currency (only field which is not modifiable)which currently is our group currency and has to be changed to an index based currency.
I would be grateful for any help.
Thanks
Claudia.

Welcome to this forum!
Change the currency type to 50.  Currency field will change automatically, provided you have specified Index based curr. in Transaction Code OY01 for the country of your company code.  But, is this a live system?  Be cautious of the repercussions before changing additional local currencies.  Think of all the existing accounting documents.

Similar Messages

  • Change in 2nd Local Currency (Hard Currency 40)

    Hello,
    We have maintained 2nd local Currency as Hard currency 40, we want to
    remove that, we have removed and tested (in test client) don't see any
    issue with that.
    We can switch off/on on 2nd local currency (hard currency) at any point
    of time.
    Before doing the changes in production system we want to make sure that there will be no other impact.
    If you have done before can you please suggest on this.
    Thanks
    Prakash

    Group currency is unique at client level, i.e. this is same for all company codes.
    go to scc4
    Check the currency of your client.
    This currency comes by default for group currency and you can't give as your own.
    If you have any requirement, then you can give it as third local currency.
    Also remember third local currency you have to maintain at first country level.
    Rgds
    Murali. N

  • How to change the Second local Currency

    Hi Experts,
    Can you please suggest on the below scenario.
    In one of clients second local currency has been set to EURO and I want to change the currency to GBP.
    Please suggest the steps to change the currency..
    Regards
    Raj

    Hi:
          Welcome to SDN.....Please note that impact of changing is very severe. If you have any Forex items in EURO then please first clear them. Otherwise i could cause very big trouble to your company data integrity.. You will to change the settings in controlling area as well... I hope this will clear your concerns.
    Regards

  • Change to 2u00AA local currency

    Hello,
    when i make a document from SD or MM in FI, my local currency and transaccion currency are same, but the second currency is other.
    For esample, USD - USD -EUR. I need change the field kurs2, to change value from transaction currency to local currency two.
    anybody known any sustitution, Exit, BADI,... where i can change this field.
    Thank.
    Rafa.

    Hi,
    If you go to transaction OB22 then you will see Posting date and Translationa date apart from Document date for conversation so select which you want..
    If you do not want translation or posting date then do following.
    1. Selection Translatin date.
    2. Set up substitution to populate transaction date based on your requirement using transaction GGB1. If standard substitution does not help then go for Substitution user-exit with the help of your ABAPer.
    Regards,
    Chintan Joshi

  • The account has been changed from only local currency to multiple currency.

    hI,
    The customer has an Account "X" which is a balance sheet account. and not a reconciliation account.
    this account has been changed on November 11, 2008, from only local currency to multiple currency.
    Local currency is ZAR, and document currency is EUR.
    i.e, the check box 'only balance in local balance' has been unchecked from 11 Nov, 2008.
    so, when i see the balance of this account in FS10N.
    the balances in currency ZAR and EUR is different.
    because the balance which is in EUR is only for months 11 and 12.
    so, questions are...
    1) can we make it same balance in both the currencies by posting a document only in EUR?
    2) how to clear it?
    Regards,
    Swetha

    The balance in the currency (EUR) depends upon the currency exchange rates you have defined in the system.  When you post a document in another currency, the exchange rate mentioned for the currency pairs (ZAR & EUR for example) is applied and the balance is written in your local currency.  If you want that the balances in difference currencies are the same, then the exchange rates should be the same for all relevant pairs of currencies.

  • Change of local currency amount in park document

    Dear SAP Experts,
    I have some queries regarding the local currency in parked document.
    Here are the steps to generate the issues:
    1. Enter vendor invoice using FB01 tcode. E.g the company code currency is MYR, then change the document currency to USD.  Maintain both debit and credit leg for the document. Please enter more than one expense account with different amount at debit side.
    Enter the amount in document currency (in this example is USD) field and enter. System will populate the local curreny (in this case is MYR) based on the table currenct updated in the system.
    At this point, the local currency (MYR) need to be changed based on user's requirement. In this case,they will be some deviation of currency rate since user has manually entered the desired amount for local currency.
    2. Park the document once finished.
    3.Goto transaction FBV0 and open the parked document.
    4. You can see the ammended local currency amount still populated correctly in local currency field.
    5. Post parked document.
    6. Display the document posted and see that the local currency amount has been changed to the amount based on table rate in system.
    Queries:
    a. Is there any way to make sure that the ammended amount would not be changed after the document has been parked and then get posted? Please be informed that this scenario would not happened if the document is directly being posted without parked.
    b. If the exchange rate at document header is being changed based on the desired amount of local currency, this would not be an issue. Since the requirement is only to change the local currency amount at GL level and not at Vendor line item. But at the end the total ammended amount at GL level has to be equal to the vendor total amount. how to resolve this issue? Can standard SAP process/configuration can catered this scenarios..?
    Thanks a lot for you help.
    Your kind cooperation is highly appreciated.
    Kind regards,
    Yuzeila

    Hi SAP experts ,
    My situation is the same - to park GL documents by uploading from a file  and then edit the local currency amount if necessary.
    However in my case we have an excel sheet generated from an external system and our users want to upload them and park all the journals  at a single time.
    We are using RFBIBl0 direct input program to upload the file and park then transaction using FBV1.  Alll the documents are parked with the data  as in the excel sheet. 
    Next step is that the users go to FBV0 to edit the parked documents and sometimes it is required to change the local currency based on the current exchange rate and then post the journal  .
    However when the parked documents are edited using FBV0 the local currency amount entered by the user is ignored and the system still  overwrites it with  the system calculated amount .
    b. As per your suggestion - I cannot use FV60 using direct input program as FV60 transaction is not supported.
    Please can you suggest if there is any way to park the Gl documents in background  from a file  and then edit the parked documents as required i.e change amounts and other fields.
    You help is much appretiated.
    Thanks and Regards,
    Aarthi

  • Change of Local Currency of a subsidiary

    Hi Expets,
    We are carrying out change of local currency in the begining of the financial year. Master data changes has been done and also currency translation method is assigned in Balance carryforward task. ( I have done local currency channge in the past years and it has worked properly).
    When I execute, balance carryforward task in test mode, the log shows same value in LC Prior Year and Local Currency.
    It has recognised in the translation parameter new currency but not translating values.
    The rates are maintained in t-curr with the exchange rate type used in the currency translation method.
    Can you please suggest what could be reason for not translating values to new local currency?
    Best Regards,
    UR

    Hi all,
    I would like to ask what is the impact if we want to change the LC of a subsidiary in the middle of  the year e.g 12/2008 instead of a new year?
    Appreciate helps.
    Thanks

  • Change Local currency of a Co.code. say from USD to GBP

    Hi friends.
    Is it possible to create a co.code with Local currency as USD and change it later on to GBP after the transactions have been posted.
    Thank you all for the needful.
    With Best Regards,
    M. Naveen Kumar.

    >
    Julius Bussche wrote:
    > GBP to EUR might still be possible though...
    Mr. Gordon Brown, pls. do the needful!

  • Change of local currency on GL accounts

    Hello,
    I need to change the local currency on GL accounts from SEK to EUR. Unfortunately although NO POSTINGS have been made to these accounts I got the following error message:
    FH502 -> Internal error: import of tabe SKA1 not possible
    can you help?
    Thanks

    Hi Karal.
    Based on your Error message GL Account is not exist COA Level
    Please Read OSS Note:
    Note 1464666 - GLMAST: FH 502: Import of table SKA1 not possible
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1464666
    Regards
    Viswa

  • Change of Local Currency from SGD to USD

    Hello experts,
    Our company local currency is SGD and we have a second local currency in USD but the company wants to change the local currency to USD and the second local currency to SGD.
    What is the impact of this and what are the configs and considerations needed?
    Thank you.

    Hi,
    What is the impact of this and what are the configs and considerations needed?
    Impact is very severe. Only recommendation is not to perform this excercise for running fiscal year. Let the fiscal year be closed firtst then you move. Please keep following in mind.
    1. Change company code currency to USD.
    2. Change Account currency of all G/L masters. If not chenged then only SGD will be posted.
    3. Make changes to Purchase order currency in vendor master. (if required).
    4. Consider controlling are settings. (very difficult)
    5. Change parrelel currencies in OB22.
    Caution
    If you have any forex items, please clear them all or it cause you big trouble.
    Regards,
    Chintan Joshi.

  • Change Local Currency For Company

    Dear Expert
    I Want to change local currency for company that already have a data.
    So From 1996 - 2010 that company used local currency SGD. Now 2011 will be change to USD.
    all previous data no need to change.
    Can I just change local currency in T-code UCWB?
    Thanks

    Yes all previous data will remain the same and only the opening balances and onward have the new local currency.
    Make the master data change as well as including the translation method in the balance carry forward task in the configuration (UCWB) before it is executed. This will cause the balance carry forward to translate the old LC to the new LC for the opening balances.

  • Change Local currency of Company Code

    Hello experts,
    We have a requirement to change the local currency of an existing Company Code. The Company code is fully operational with all the other modules and is active for about 7-8 years now. We are on version ECC 6.0. Can you please tell me how to go about this? I know its going to be a big activity, but can anyone explain / share the steps, process plans about this?
    Thanks & Regards,
    Sameer

    Hi,
    Please refer to the OSS note 316222:-
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=316222]
    Also have a look at the master OSS note 120420:-
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=120420]
    Regards,
    Gaurav

  • Change local currency

    Hi Experts,
    I have a client that need to change the local currency. now it was IDR and then they want to change to USD.
    I believe we have to create a new database for this. but what is to be considered when we want to do this?
    including the financial, inventory, etc
    Regards,
    David

    Hi David,
    you are correct in saying that you will have to create a new database. Before doing so, please keep in mind that all transactions in a company are held in Local Currency (LC), all tax reporting, financial & accounting reporting is done in LC. You might check with a qualified accountant in the country whether it is permissible to use another LC than is actually used in the country. If your client is located in Indonesia, he maybe could use IDR as LC & then can employ USD as system currency (SC). All financial reporting can be done in SC, every JE is posted in SC as well (except RU journals).
    If your customer decides to go ahead with using a different currency, you will need to decide whether you want to start with opening balances or documents/journals or a combination of both. The obstacles are the same as they are when changing from a legacy system to SAP Business One.
    All the best,
    Kerstin

  • Changing  Condition values and Condition currency of PO to local currency.

    Dear Friends,
    I have a weird request.
    I have  a PO which has been created in USD. My local currency is INR.
    Normally, when i display the PO, under conditions tab, the condition values and currency will be displayed in USD.
    My requirement is like, i want to change and simulate the condition values in USD to local currency (INR) based on current exchange rate.
    Is there any way i can simulate the same. Kindly help.
    Thanks and Regards
    Sandeep Sivan

    I am not sure that it can be done through the config. You can change the values with the correct user exit and change the values accordingly before the values are displayed.
    Regards,
    FS

  • Change local currency to document in a query

    Hi
    I have a request from a user to see one of the query which displays purchase price differences currently in local currency, but user wants to be based on document currency.
    Can you help me out with the procedure to do so? I havent done such thing before.
    Thanks in advance

    Hi,
    The best way is to read the help llink as it will give you exact idea on how to go about it instead of us writing the same thing again here.
    http://help.sap.com/saphelp_nw70/helpdata/EN/ec/076f3b6c980c3be10000000a11402f/content.htm
    You can check the link
    http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a682de07211d2acb80000e829fbfe/content.htm
    to create currency translation in bex.
    If you face some issue then let us know.
    just make sure that u do proper settings and u have proper data in the required currency tables.
    Thanks
    Ajeet

Maybe you are looking for