Change of BW source URGENT

Hi to all,
I have the following problem and need help. Since we plan to upgrade the ECC 6 we had to change the productive system to a new one. Eventually the new system has a new logical name. Since it is connected to a productive BW we had to follow note 886102. In a few words what we did is, deleted entries at rsbasidoc with fm rsap_biw_disconnect, correct all rfc to point to new server, run bdls at productive system and then try to restore connection from rsa1.
Restore is not working and we get an error :source system does not exist".
Do we need to run bdls at productive bw also???
Can someone help.
Thank you in advance
Stefanos

Hi Stefanos,
Below are the steps I did follow while changing the logical client. Keep in mind the datasources of both the clients should be identical.
1) Delete CLNT310 in BW (no Datasources of this system is used in BW)
2) run BDLS in BW change CLNT400 to CLNT310
3) Run RSAP_BIW_DISCONNECT in 310 clients ..
f) Restore connection CLNT310
I also refer pdf available on SDN i.e System copy.
Cheers!
Amit

Similar Messages

Crystal ActiveX Runtime Lib: Change text data source path at run time.

We have some PCs running Crystal Reports 10 and some running CR 9 and 8.5. For each PC, we set up a System DSN ODBC data source (in Control Panel - Administrative Tools) for pulling data from text files to
generate reports.
Recently we wrote some routines (see the Visual Basic example at the
end of this message) to change the path of the data files at runtime.
According to the Crystal Reports Technical Reference Guide, we may use
the method LogOnServer() of an Application object or an DatabaseTable
object. However, we find that this does not work: the PrintOut()
method only pulls data from the default path as configured for the
System DSN, not from the path passed as the third parameter of
LogOnServer(). It does not return any error message.
We have also tried to use SetTableLocation() method, and it still does
not work.
Would any experts examine our code below and advise what we are missing? Thanks.
For the following VB example, we have:
System DSN Name: AP_WORKSHEET
Driver: Microsoft Text Driver
Database Directory: D:\0ood2 (i.e. the default path)
Crystal Report Document: D:\3g\run\Vision\apcyto\Reports\crBlockWS.rpt
(Which specifies that the data source text file name is BlockWS.txt)
Purpose : We would like to read the data source text file from
D:\0ood1 instead of the default path.
Following is the code of the VB macro:
Sub test()
Rem In this version of the subroutine, we call
Rem DatabaseTable.LogOnServer() and "Rem"ed out
Rem Application.LogOnServer() and SetTableLocation().
Rem We have un"Rem"ed each of them and "Rem"ed others and try to run.
Rem In all runs, data are pulled from the default file
Rem D:\0ood2\BlockWS.txt instead of D:\0ood1\BlockWE.txt.
Dim crxapp As CRAXDRT.Application
Dim crxRep As CRAXDRT.Report
Dim crxDB As CRAXDRT.Database
Dim crxTab As CRAXDRT.DatabaseTable
Dim crxConnPs As CRAXDRT.ConnectionProperties
Dim crxConnP As CRAXDRT.ConnectionProperty
Dim apropSubLoc As String
Dim apropConnBufStr As String
Set crxapp = CreateObject("CrystalRuntime.Application")
Rem
crxapp.LogOnServer "p2sodbc.dll", "AP_WORKSHEET", "<CRWDC>DBQ=D:\0ood1",
Set crxRep = crxapp.OpenReport
("D:\3g\run\Vision\apcyto\Reports\crBlockWS.rpt")
Set crxDB = crxRep.Database
Set crxTab = crxRep.Database.Tables(1)
apropConnBufStr = crxTab.ConnectBufferString
apropSubLoc = crxTab.SubLocation
crxDB.LogOnServer "p2sodbc.dll", "AP_WORKSHEET", "<CRWDC>DBQ=D:\0ood1",
Rem crxTab.SetTableLocation "D:\0ood1\BlockWS.txt", apropSubLoc, "DSN="
Rem Set crxConnPs = crxTab.ConnectionProperties
Rem Set crxConnP = crxConnPs.Item("DSN")
Rem crxConnP.Value = "AP_WORKSHEET"
Rem Set crxConnP = crxConnPs.Item("Database")
Rem crxConnP.Value = "D:\0ood1\BlockWS.txt"
Rem crxTab.Location = "BlockWS.txt"
crxRep.DiscardSavedData
crxRep.PrinterSetup (0)
crxRep.PrintOut
End Sub
For VB macros, the problem exists in all of CR 8.5, 9 and 10. However,
for another platform we are using, Unify Vision 4GL, it works for CR
8.5 while not working for CR 9 and 10.
Following is the source code in Unify Vision 4GL. This language may
not be popular, but I thin you are about to see how it calls the
Runtime Library methods LogOnServer(), OpenReport(), PrinterSetup() and
PrintOut().
%gfPrintCrystalReport
BOOL FUNCTION gfPrintCrystalReport($reportName)
BEGIN
if NOTMKNOWN(GF:$oSeagateId) then
create service of activex
class 'CrystalRuntime.Application'
object_ref into GF:$oSeagateId;
if MKNOWN(GF:$oSeagateId) then
begin
/* TD23013: Database directories are dynamic to
accommodate multiple user requirement of Citrix */
send message LogOnServer to GF:$oSeagateId
using
( 'PDSODBC.DLL', 'AP_WORKSHEET', '<CRWDC>DBQ='+GF:$WinTempDir,'','')
identified by $msgHandle;
if $msgHandle:MSG_STATE 'RESPONSE_PROCESSED'
then
begin
display 'Crystal Reports cannot connect
to the datasource ' for fyi_message wait;
return (FALSE)
end
send message OpenReport to GF:$oSeagateId using
($reportName, 1)
identified by $msgHandle returning
$oCrystalReport
if MKNOWN($oCrystalReport) then
begin
if (NOTMKNOWN(GF:$printerName)) then
set GF:$printerName to
$oCrystalReport->PrinterName;
if GF:$printerName $oCrystalReport-
PrinterName then
send message SelectPrinter to
$oCrystalReport
using
(GF:$driverName,GF:$printerName,GF:$portName)
identified by $msgHandle;
set $oCrystalReport-
DisplayProgressDialog to FALSE;
while TRUE
begin
DISPLAY NOTICE 'Print to : ' +
GF:$printerName
LABELS 'Ok'
DEFAULT, 'Cancel', 'Printer Setup'
RESULT INTO $userOption
switch ($userOption)
begin
case 0 :
send
message PrintOut to $oCrystalReport
using
(PROMPT_USER, NUMBER_OF_COPIES, COLLATED, START_PAGE, STOP_PAGE)
identified by $msgHandle;
set
$oCrystalReport to UNDEFINED
return
(TRUE);
case 1:
set
$oCrystalReport to UNDEFINED
return
(FALSE);
case 2:
send
message PrinterSetup to $oCrystalReport
using
(0)
identified by $msgHandle;
if
GF:$printerName $oCrystalReport->PrinterName then
begin
set GF:$printerName to $oCrystalReport->PrinterName;
set GF:$driverName to $oCrystalReport->DriverName;
set GF:$portName to $oCrystalReport->PortName;
end
break;
end
end
end
end
return
(FALSE);
END

Hi Sydney,
If you search the Developers help file you'll find info on using the method:
How to change the data source
This example demonstrates how to change the data source from native Access to an OLEDB (ADO) data source by using the ConnectionProperty Object, as well as how to change the table name by using the Location property of the DatabaseTable Object. CrystalReport1 is connected to the xtreme.mdb database found in the \Program Files\Crystal Decisions\Crystal Reports 10\Samples\En\Databases folder. The report is using the Customer table. A copy of the Customer table is added to the pubs database on Microsoft SQL Server.
' Create a new instance of the report.
Dim Report As New CrystalReport1
Private Sub Form_Load()
' Declare a ConnectionProperties collection.
Dim CPProperties As CRAXDRT.ConnectionProperties
' Declare a DatabaseTable object.
Dim DBTable As CRAXDRT.DatabaseTable
' Get the first table in the report.
Set DBTable = Report.Database.Tables(1)
' Get the collection of connection properties.
Set CPProperties = DBTable.ConnectionProperties
' Change the database DLL used by the report from
' native Access (crdb_dao.dll) to ADO/OLEDB (crdb_ado.dll).
DBTable.DllName = "crdb_ado.dll"
' The connection property bags contain the name and value
' pairs for the native Access DLL (crdb_dao.dll). So we need
' to clear them, and then add the name and value pairs that
' are required to connect to the OLEDB data source.
' Clear all the ConnectioProperty objects from the collection.
CPProperties.DeleteAll
' Add the name value pair for the provider.
CPProperties.Add "Provider", "SQLOLEDB"
' Add the name value pair for the data source (server).
CPProperties.Add "Data Source", "ServerA"
' Add the name value pair for the database.
CPProperties.Add "Initial Catalog", "pubs"
' Add the name value pair for the user name.
CPProperties.Add "User ID", "UserName"
' Add the name value pair for the password.
CPProperties.Add "Password", "password"
' Set the table name. ' for SQL types it would be "database.dbo.table"
DBTable.Location = "Customer"
Screen.MousePointer = vbHourglass
' Set the report source of the viewer and view the report.
CRViewer1.ReportSource = Report
CRViewer1.ViewReport
Screen.MousePointer = vbDefault
End Sub

Trying to change the data source for a Crystal Report.

The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.


Am I missing a step, or is there another way to accomplish this?


Thank you.

<hr />
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:16 PM

<style type="text/css">
/<![CDATA[/
 body
 font-size: 1.125em;
 font-family: helvetica,arial,"sans-serif";
 .code{font-family: "courier new",courier,mono,monospace}
 .bi{font-style: italic; font-weight: bold;}
/]]>/
</style>
Justin,

Thank you for the reply. Time constraints have not allowed me to post back to this tread
till now. I will try your suggestion. My assumption is that Save the report back to the
info store refers to IInfoStore.commit(IInfoObjects).


I'm afraid that I do not understand why I don't want to change the report client document,
or why successfully exporting the report with the new login/password is not what I
want to do. Any explanation on that statement would be appreciated.


I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
logon property bag. Below you'll see my revised code which modifies the report logon and
server. I have no idea what
this does, and SAP support has not been able to tell me why it works. However, what I
discovered is that if I changed the report option, Database Configuration -> When
viewing report:, in the CMS to Use same database logon as when report
is run from Prompt the user for database logon, then the
SSOKEY property had been added to the logon property bag having an empty string as its
value. This allowed me to successfullyupdate and save the modified logon back to the CMS.


So I took a chance and added code to always add the SSOKEY property with an empty string
as its value, and I could then successfully modify and save the report's logon info
and server. Again, I don't know what this means, but it has worked so far. If anyone has
some insight or comments, either are welcome. Thank you in advance.

 
<hr />
<pre>
private void changeDataSourceOfAWFCrystalReports()
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects = null;
 IInfoObject reportObj = null;
 IReport curReport = null;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dbController;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
 Fields connFields = null;
 String outputStr;
 int numOfReports;
 int numOfQueryPages;
 double progressIncrementPerPage = 30;
 int progressIncrementPerReport = 0;
 // Path query to reports is in a .properties file.
 String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
 try
 // Executes IInfoStore.getPageingQuery() and generates a list of queries.
 getCms().setPathQueryQueries(queryStr, 100);
 numOfQueryPages = 0;
 // Gets a List<String> of the IPageResult returned from IInfoStore.getPageingQuery().
 if(getCms().getPathQueryQueries() != null)
 numOfQueryPages = getCms().getPathQueryQueries().size();
 if(numOfQueryPages > 0)
 // Use 30% of progress bar for the following loop.
 progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
 for(int queryPageIndex = 0; queryPageIndex < numOfQueryPages; ++queryPageIndex)
 // Gets the IInfoObjects returned from the current page query
 newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
 numOfReports = newInfoObjects.size();
 if(newInfoObjects != null && numOfReports > 0)
 progressIncrementPerReport =
 Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
 for(int reportIndex = 0; reportIndex < numOfReports; ++reportIndex)
 reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
 curReport = (IReport)reportObj;
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dbController = clientDoc.getDatabaseController();
 conInfos = dbController.getConnectionInfos(null);
 for(int conInfosIndex = 0; conInfosIndex < conInfos.size(); ++conInfosIndex)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue(
 "QE_ServerDescription"
 ,getConfigFile().getDBDataSourceConnections());
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("SSOKEY", "");
 logonProps.putStringValue(
 "Server"
 ,getConfigFile().getDBDataSourceConnections());
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
 newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
 dbController.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 } // end for on conInfosIndex
 clientDoc.save();
 } // end for on reportIndex
 } // end if on newInfoObjects
 } // end for on queryPageIndex
 } // end try
 catch(ReportSDKServerException Ex)
 // handle...
 catch(Exception Ex)
 // handle...
 finally
 getCms().commitToInfoStore(newInfoObjects);
 if(clientDoc != null)
 clientDoc.close();
</pre>

Can we change the Data source in AO ?

Hi Folks,
Environment: SAP HANA on AO
I have the following scenario , Am creating a report on one Calculation View: CV and have done some analysis where I have pulled in some dimensions and kept some background filters.
Now I have to generate the same report on another Calculation View: CV2 ( Similar to structure of CV ) and compare the reports. Is there any way to edit copy the previous report and change the data source? Can you guide me on that?
Regards,
Krishna Tangudu

Hi,
You can exchange the calc view by clicking on the button next to the data source name in the tab "components", but when you do this, the new data source will overwrite the settings and filters from the previous data source. So no, there is not a supported way of exchanging the datasource and keeping the filters of the previous data source.
Best regards,
Victor

Change the data source connection of existing reports in web analysis

Hi
I have developed certain reports in web analysis 9.3.1, now I need to point these reports to a new cube with same layout. Can anyone let me know how to change this data source. There are lot many reports so it will take lot of time for me to recreate them.
Please suggest any good approach
---xat

You can edit the Database connection from Web Analysis. Perform the below tasks to edit the database connection..
1) Login to Web Analysis
2) Select the Database Connection which needs to be modified.
3) Right Click then Edit..
Hope this helps you..
Regards,
Manmohan Sharma

Changing the Data source in Business Objects XI

Hi,
Is it possible to change the data source(not universe) in runtime to generate business objects reports. I am using BOXI 3.1.
Below is the code I am using to change the universe in runtime. I would like to change this so that i can change the data source instead of changing the universe. My intention is to generate report from multipple database using same universe. Right now I am using multipple universes connected to multiple datasources to achieve this. I am using Report Engine SDK(Java).
 if("Webi".equals(mDocKind))
 // Added for multiple database support
 DataProviders dataProvs = documentInstance.getDataProviders();
 try{
 //To support multiple queries in BO reports
 for(int count=0;count<dataProvs.getCount(); count++){
 DataProvider dp=dataProvs.getItem(count);
 DataSource ds= dp.getDataSource();
 infoUniverseObjects = getUniverseObject(infoStore,NewUniverseName);
 infoUniverseObject = (IInfoObject)infoUniverseObjects.get(0);
 String newDsCuid = infoUniverseObject.getCUID();
 dataProvs.changeDataSource(ds.getID(), "UnivCUID=" + newDsCuid, true);
 if(dataProvs.mustFillChangeDataSourceMapping())
 // Re-map data source to target Universe objects
 ChangeDataSourceMapping mapping = dataProvs.getChangeDataSourceMapping();
 ChangeDataSourceObjectMapping[] maps = mapping.getAllMappings();
 dataProvs.setChangeDataSourceMapping();
 }//for dataProvs.getCount()
 }catch(Exception e)
 mLogger.info("BOReportObject","createReport","Inside multiple data providers loop"+e.getMessage());
Thanks in advance
Shameer
Edited by: Shameertaj on May 20, 2009 3:08 AM

Hi Shameer,
I think this is only possible with the Universe Designer SDK (which is only available in COM).
Please kindly refer to the API reference for the Universe Designer SDK for more details:
http://help.sap.com/businessobject/product_guides/boexir31/en/bodessdk.chm
Also, please note that changing the universe connection when viewing a document on-demand is not recommended because this could lead to possible issues.
For example:
Two users trying to view documents that uses the same universe at approximately the same time.
But user A wants to use connection X and user B wants to use connection Y.
This could lead to an error while openning the document or while refreshing/retrieving the the data.
Hope this helps.
Regards,
Dan

How do I change the clock source in Audio/Midi when it's greyed out?

I've tried and tried to change the clock source to eliminate pops and clicks in audio output and input but I just can't change the clock source because it's greyed out - how can I make it changeable?
Any suggestions would be great !

Hi, Acoma.
Have you seen the steps and specifics (analog vs. digital inputs) discussed in:
• "Soundtrack Pro: Setting the correct clock source for your audio interface."
• "Logic Pro/Express: Digital input not available."
Providing more specifics concerning your exact recording configuration may enable the audio gurus who answer questions here to give you additional assistance. You may also want to try your question on the Discussions for either of Apple's Soundtrack or Logic products, as those contributors are most familiar with audio set-up issues.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Music app does not have the function to change the audio source.

I use to change my audio source in my music app with the icon that looks like a triangle going into a rectangle i think it is call airplay, but it not there any more and what it is weir is that others app does have it so if i change my audio source in a video online it will change it in my music too..... Well i hope i could explain my self clear enough. Just put the airplay icon back in the music app. Thanks for your attention.
Best regards
Roger

iTunes Radio is currently only available in the US - if you are in the US then try logging out and back into your account via Settings > iTunes & App Store, and if that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Need to change report data source on reports in a copied universe

We are setting up a new testing environment. So I made a copy of our BO universe so we could have two different testing universes. I then created a copy of the data source database that will be used as the data source for the reports in the copied universe. The two different databases have the exact same tables, columns and indexes as the development database. The only difference will be the data inside the tables.
I now need to change the reports to use the new universe since the reports were written using the universe instead of using the database. I am not changing anything else in the reports. I just need them to run against a different Oracle database.
So I go into Crystal Reports version 11.5.0.313 and open the report up. I then go into Database fields in Field Explorer to change the data source. I then go to the Set Datasource Location screen. I open up the universe label by clicking on the plus sign and I select the copied universe. When I do that, the Business Objects Query panel screen opens up. Because I have switched universes, Crystal Reports wants me to reselect the columns and rebuild the query.
We have over three thousand reports so we are trying to avoid rebuilding them. I am looking for a better way to change what database a report runs against.
Note: All of the reports will be run ion demand. Nothing will be scheduled.
Any suggestions and information will be greatly appreciated.
Has anyone run into this? What was your solution to this problem?

Hi Joe,
Moved your post to the Universe Forum.
First you are using the original release of XI R2. You need to upgrade to Service Pack 6 by:
Run License Manager first to get the keycode if you don't have it on paper somewhere.
Then download these and uninstall then run full build first:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Try again
Don

Problem changing SQL data source at runtime with VB6 and CR XI

Hello All,
We have several VB6 programs using CR XI and are able to pass a DSN to change data source with Access DB that works just fine.
We are using similar code in another program to change the data source in an SQL DB and get an error... Failed to Open the Connection.
This is a sample of what works with Access but not SQL DB:
Dim crxApplication As New CRAXDRT.Application
Public Report As CRAXDRT.Report
Global DSN_STRING
DSN_STRING = "DSN = JC Crystal Reports"
Dim crxDatabaseTable As CRAXDRT.DatabaseTable
Set Report = crxApplication.OpenReport(App.Path & "\Test11.rpt", 1)
'change location of each table in report
For Each crxDatabaseTable In Report.Database.Tables
        crxDatabaseTable.Location = DSN_STRING
Next crxDatabaseTable
FormCrystal.Show vbModal
We have tried other things from the web, still get error.
Any help would be greatly appreciated.
C Reid

Hi Carole,
When using SQL types you need more than just the DSN name. CR does keep the password in the report file and all SQL types are usually password protected.
Try this simple code:
First log onto the server:
rpt.database.LogOnServerEx("crdb_odbc.dll, pServerName, [pDatabaseName], [pUserID], [pPassword], [pServerType], [pConnectionString])
The ConnectionString is the complete line. Run in debug mode and display what the reprot is using and you can see the format it requires.
Once logged on now you can set the location for each table:
'report connection properties
        With rpt.Database.Tables(1)
            .ConnectionProperties("User ID").Value = "sa"
            .ConnectionProperties("Password").Value = "YourPassword"
            .ConnectionProperties("Data Source Name").Value = "Your DSN Name"
            '.ConnectionProperties("Data Source Name").Value = "ServerName" ' can be used if specifying a new connection
            .ConnectionProperties("Database").Value = "Northwind"
        End With
        Set rpt.Database.Tables(1).Location = "Northwind.dbo.CustOrderHist"
I'm only using one table so easy enough to create the loop or use for all...
Thank you
Don

ALE Change Pointers in source system not active

Hi All,
I am trying to load 0COSTELMNT using deltas. The initial load is OK and then i use a delta and it fails and i get the error:
"ALE Change Pointers in source system not active"
I have carried out the following steps in an attempt to resolve the problem - but it didnt. Anyone have any advice??
(1) Checked BD61 to confirm whether the change pointers are active
(2) Checked BDCP to confirm the number range is maintained
(3) Checked SALE (Activate change pointers for message types) to confirm whether the change pointer has been activated for the type we need:
COCOKA Control segment CO object/cost element
COELEM Cost element master data
(4) In transaction snum, Selected number ranges and confirmed the intervals are setup
No. 01
FROM: 0000000001
TO: 0000009999
(5) Activate transfer structure
(6) Replicate Datasources
Thanks,

If you are transferring master data from source system, the BD61 setting on the source system should be checked.
Why it has been unchecked - not sure (likely someone did it by mistake).
It shouldn't have any effect on txnl delta. What will be effected though is that you will have lost delta of the ALE based data sources for the period this setting was unchecked.

Changing the data source of a Crystal Report

Post Author: starmizzle
CA Forum: Crystal Reports
We're running a trial of BusinessObjects XI Release 2 to see if it fits our needs.
We were told that we could import and publish our existing Crystal Reports and then later on go back and change their data sources to point to new universes as they're built.
So I've published a simple Crystal Report that I can run and modify through Infoview. And I've created a universe with the appropriate fields and calculations that it needs. So how do I force my published report to use the new universe as its data source instead of the system DSN it had when it was made?

Post Author: starmizzle
CA Forum: Crystal Reports
We're running a trial of BusinessObjects XI Release 2 to see if it fits our needs.
We were told that we could import and publish our existing Crystal Reports and then later on go back and change their data sources to point to new universes as they're built.
So I've published a simple Crystal Report that I can run and modify through Infoview. And I've created a universe with the appropriate fields and calculations that it needs. So how do I force my published report to use the new universe as its data source instead of the system DSN it had when it was made?

How to change the Data sources after deploying the application ??

Hi All,
i want to know how to change the Data sources after deploying the application to the application server ???
I'm using Oracle Application Server 10g Release 3 (10.1.3.1.0)

Can you access the Enrprise Manager website of the target Application Server from your location? If so, you can change the datasource in it. If not, yo can bundle the datasource definition in your archive and use that one instead of the one configured in the target OC4J container. Or this will just be the responsability of your customer: whenever you send a new WAR file, they have to modify the datasource if needed and deploy the application?

Who last changed a data source

Hello all,
Could you please tell me how can I find out who last changed a data source in a R/3 system.
Thank you
Ramona

Hi,
in your R/3 customizing client, execute RSA2 with you DSource; you'll see the last changed by and when....
or
table ROOSOURCE fields TSTPNM, TSTPDAT, TSTPTIM...
hope this helps...
Olivier.

IS IT POSSIBLE TO CHANGE DINAMICALLY THE SOURCE OF A QUERY?

IS IT POSSIBLE TO CHANGE DINAMICALLY THE SOURCE OF A QUERY, AND TO SHOW DATA FROM DIFERENT TABLES, BASED IN USER PARAMETER VALUE?.
EXAMPLE:
IF USER PARAMETER = 1 THEN
SELECT COLUMN1 FROM TABLE1
ELSIF USER PARAMETER = 0 THEN
SELECT COLUMN2 FROM TABLE2
END IF;
ANY OTHER IDEA??
THANKS FOR HELPS.

Read the online help about lexical parameters.
Select a from &p_1
should work.

Change of BW source URGENT

Similar Messages

Maybe you are looking for