Change of company code for equipment

hi! PM gurus,
Can anyone tell me how to change co cd of an equipment?
and also how to dismantle the equipment?
helpful answers will be rewarded.
Thanks.

Hi Vaibhav......
It is possible to change the Company Code of an equipment, but there are some basic needs to be fulfilled for that.........
> Both the Company Codes (one in which Equipment exists & the one in which you want the equipment to be transferred) should fall under same Controlling Areas & Chart of Accounts.
As far as dismantle of equipment is concerned, you have two options:
> Go to Equipment Master - Structure Tab - Function Location - Click on Icon on right side, select dismantle.......in this equipment is dismantled & can be instaaled at other Function Location.
> but if you have to dismantle & equipment & put it in to the storage, go for Tcode - IE4n
Hope, this will help you.........
Regards

Similar Messages

Error when changing a Company Code for a given Cost Center

Hello Friends ,
I'm trying to modify a company code value for a given cost center in KS02 and I get the below error. The error message receommends to change the analysis period ( not sure what it is..) but when I click edit > Analysis period from tool bar I still get the below message , is there way to get over come this issue ?
Thanks in advance ,
Field change Company Code is not possible (transaction data already exists)
Message no. KS134
Diagnosis
To ensure the consistency of existing data, you can only change object Company Code if no transaction data exists in the change period; that is, neither plan data nor actual data has been posted.
As transaction data already exists, it is not possible to change objects in this time period.
Procedure
If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...".

Thank you Vishal . I have 3 cost centers with 2 having validity period ( from 01/01/1950 to 12/31/9999) and third one had 2 records 12/30/2004 to 12/26/2009 and 12/27/2009 to 12/31/9999 ) for the third one it did allow to change the validty period and I could change the comapny code for my profit center . But for first 2 somehow it doesnt allow to change the validity periods. And when I run some reports against these 2 cost centers to see if there is any activity I dont see any data .
Could you please give your ideas ?
Thanks alot .

Changing a company code for a plant/profit center

I have a situation where a company code has to be changed for a few plants/profit centers.
Has anybody had experieced that before? is it even doable??

You have hope - We merged company codes at my business and the plants and profit centers changed from one CoCde to the other.
Profit center are not assigned to a company code they are assigned to a contolling area. There is "Company code assignment for profit center" ie What company codes can the PC be used in.
Plants??? If you don't get an answer here, you may want to try the MM forum for help.

Cannot change company code for functional location in PM module

Dear Gurus,
When I try to change the maint plant for topmost level hierarchy FL, I get error. So I cleared the data in organization tab (planning plant....) and tried to click location tab but receive warning (After changing PM planning plant, please check dependent objects) & cannot proceed. Kindly advice me on how I can change the company code for all the functional location in the plant.
Thank you.

Dear Gurus,
Is there any way I can mass change the company code for all FLs?
Thank you.

Process for changing a company code

Looking for information regarding the process required to change a company code. We have an existing company A and need to change to company 100.
Areas that I need to address are FI/CO, SD, MM. The existing account balances of company A need to be transfered into company 100.
Thanks,
Robert
Edited by: Robert Roe on Mar 5, 2008 1:55 PM
Edited by: Robert Roe on Mar 5, 2008 1:56 PM

hi,
i found this.
Sometimes during your IDOC/BAPI communication you will get error "No global company code is assigned to the company code" & Message no. FC 326 in Idoc status record.
This problem is very frustrating. The solution is simple, but hard to find.
There is a very long menu to get there. It is: IMG > Basis Components > Application Link Enabling (ALE) > Modelling and Implementing Business Processes > Cross-Application Settings > Global Organizational Units > Cross-System Company Codes
1. Create a cross-system company code.
2. Assign the cross-system company code to a chart of accounts to which it is also assigned on the central system. This setting is needed on the decentral systems in order to determine the chart of accounts of the company code on the central system.
3. Assign cross-system company codes to the local company codes. Specify the identifiers of the relevant cross-system company codes for each of the individual company codes.

Creation of a PO with reference to a contract - change of company code

Hi experts,
When a PO is made with reference to an existing contract, the company code is copied automatically from the contract into the PO.
Do you have an idea if it's possible to modify this in the PO? So that we can choose another company code?
Thanks,
Michaë

Ofcourse you can change the company code in the purchase order.
However please check that same purchase organization is responsible for both the company codes.
However it might give you an error that plant is not assigned to the company code.
Therefore the best way is to create the PO without reference of that contract OR you can create a contract for the company code in PO and then create a PO with the same.

Change of Company code from one Cons Group to another Cons Group.

Dear All,
Please advise on change of company code from one Cons Group to another Cons Group , we have Cons Structure - at present few companies are in one cons group and as a policy we have to move the companies to another cons group. So please advise me what will be the case if we move int he following senarios:
1. if till period 012 year 2008, company A is in Cons Group AA and we want the same to Cons Group BB. How it will move to Cons Group BB in a Company code with the opening balances?
2. if there is no data in SEM BCS total Cube - and we want to move the Company A from Cons Group AA to Cons Group BB.
What will be the effect in both the scenarios. How to do this? if you can specify some steps then I will try to analyze the situation.
Thanks in advance

The changes are not complicated but company A must be placed in cons group BB as of period 12 2008 and in the master data of the cons group it should be indicated that the first consolidation is at the end of the period (EOP). Likewise in cons group AA must continue to include company A but in the cons group master data it must be indicated that the period of divestiture is 12 2008 EOP.
The cons group changes tasks must be executed to move the balances in period 12 2008.
If there is not data for company A in the totals infocube you may simply drag-and-drop company A from cons group AA to cons group BB without any concerns.
The affect in each scenario is different because if there is data that is to be reported as part of cons group AA company A must be included in cons group AA.

Assign company code for subsequent settlement at Plany level

Hi
I am configuring "MM Subsequent settlement" in IMG
In the step - Assign company code for subsequent settlement at Plany level" , i can not add my purchasing organisation and assign to company code. There is no option for "New entry" in the change mode.
Could you please suggest?
Best regards
Vijay

Hi,
Assignment is only possible or necessary for purchasing organizations to which a company code is not assigned.
SAM

Change of Company Code Currency

Dear All,
We have a scenario of changing the company code currency. We have an option here.
Either to
i) change the currency of a live company code with postings or
ii) to change the currency of a live company code that has no postings made so far.
We are sure that we can recommend the second option, however is there any precaution we need to take before making the actual change for the ii) option?
Anyone who had done this before please let us know what are the cautionary measures to be taken if any?
Regards,
Asokan.

Asokan,
If the company code has had no postings made so far after going live, then you have a relatively simple situation, and should not face any major problems.
However, it is essential that the company code not have any postings made in ANY of the systems, including DEVELOPMENT and TEST systems. Go ahead and try to change the company code currency in transaction OX02 in your DEV environment. SAP will not allow you to change the currency for a company code where your current system has postings made to it. Also, if and when you are able to make the change and try to move the TR for this change, your test system (target system for the TR movement) should also have this situation, else there's a good chance the TR might fail in the TEST system.
There is a transaction for Reset Company Code Data - I don't recollect more details, but do some homework and you'll find it easily. You'll need that before you can undertake this change.
Read the caution in the transaction for "Reset Company Code Data" carefully as that is irreversible, and is highly disruptive.
Hope this helps.

Company code for applicant

Dear Experts,
I am fetcing the data for employement interview applications from pb4000 table using
select pernr from pb4000 into table it where apsta eq '1' and begda in s_begda.
my requirement to fetch it based on company code where does the field company code will have.. for applicant..
waiting for your valuable responses.
Thanks in Advance,
Thanks and Regards,
Thiru. R

Hi Thiru,
While doing the Initial Hring thro' PB 40 or PB10 you have to include the IT0001 in that infogroup. Then you can easily fetch the Company code for that Applicant.
For more look at here for including the IT
Personnel Management>Recruitment>Applicant Selection-->Change info groups
It help you to fix ur problem

Can we change the company code posting periods to previous periods?

Hello folks,
I wated to change company code posting periods to previous posting periods.Right now the posting period for company code is 04/2008, and I want to make it to 10/2007. Is it possible.
I am doing this in Dev Sand box.
Thanks
Ravi

Path: SPRO->Logistics-General->Material master->Basic Settings->Maintain Company Codes for Materials Management.
In this configuration, you can change the posting periods. As mentioned earlier in one of the replies, this change is done with utmost caution as this could result in to data inconsistencies, if left open for a longer period of time.. It is advised to change this setting when no other document postings are allowed by other users...

FBZP -- Changing Paying company code address

Hi Folks,
I have changed the Company code address in FBZP (paying company code) in the Sender details tab and saved it to the same Text name. Then I created a transport and moved it to the other DEV client for checking the transport, no changes have occured. Can you please help me. Is there any other way that I should be following to fix this issue.
thanks.

Please use Transaction code scc1 and copy the transport in the same environment. Incase you are doing this please make sure the transport request you have generated has the changes included in the request.
Eg: Please go to the screen which you want to transport and add them into your transport request. you should some times see a tab saying include request. please select this though you have assigened this to a transport request and then save it and exit out the screen.
The go back to se10 and chekc the unreleased transport requests and check the customizing node. double click it and see if the item you are trying to transport with chnages has been included or if the tranport customizing is just empty.

How can I change an NC Code for a scrapped SFC

Is it possible to change the NC COde for a scrapped sfc without changing anything else?

Hans,
The only place where you can edit NC data is Edit tab of NC Client if the tab is enabled. However, I doubt that it allows you to change NC Code ID but leave the rest of the collected NC data.
Regards,
Sergiy

Set Up Payment Methods per Company Code for Payment

Hi All,
Can any expert please suggest whether do we need to enter only paying company codes while defining the payment methods per company code or enter all company codes.
Ex: We have 10 company codes for which there are 3 paying company codes. After defining the payment methods in the country, while defining payment methods per company code do we need to define for only 3 paying company codes or for all 10 company codes. Because when you are paying through one company code on behalf of three company codes, how does it make sense having the payment method in company codes which are not paying. I hope my query is sensible.
Thanks&Regards
Srinivas

Generally Payment method is defined for a customer at Company code level and Sales area level. Through Partner function we can control who has to make payment. In your case , if you need to define different customer as payer you can do so in KNVP table. while making sales order payment terms will pick from Payer of the Sold to patry customer.
Not sure why do you wants to link to Company code

Set up Payment Methods Per Company code for Transaction

Hi All,
Can any expert please suggest whether do we need to enter only paying company codes while defining the payment methods per company code or enter all company codes.
Ex: We have 10 company codes for which there are 3 paying company codes. After defining the payment methods in the country, while defining payment methods per company code do we need to define for only 3 paying company codes or for all 10 company codes. Because when you are paying through one company code on behalf of three company codes, how does it make sense having the payment method in company codes which are not paying. I hope my query is sensible.
Thanks&Regards
Srinivas

Hi,
You should define the payment method in all the 10 company codes regarding they are the paying or non paying company code.
If you are not defining them they you will not have the option to select the payment for that particular company code.
regards
pbb

Change of company code for equipment

Similar Messages

Maybe you are looking for