Change of domain for the cluster nodes

Hi,
We need to change our existing domain i.e. NT domain to windows 2003 domain for the SAP production server cluster nodes.
There are 2 nodes. They are in active active mode.
Windows 2000 advanced server is installed in the nodes.
Can anybody tell us that during the change of the domain what else we need to take care or what should be correct procedure for this so that database & application does not have any impact
Eagerly waiting for the reply
With best regards
Joydeep

I would NOT do that.
What immediately comes to my mind is:
- users need to be recreated in the new domain
- filesystem owners and permissions of all SAP and database directories must be changed
- permissions on registry keys must be changed
- owner/permissions of the files in the cluster filesystem must be changed
There is no easy way of doing this. Depending on the database that is used more things are necessary. If you don't exactly know, where which application has files, it will certainly be troublesome.
The safest way would be to use a different hardware and do a homogeneous system copy by reinstalling the cluster in the new domain.
Markus

Similar Messages

Alert: The backup operation for the cluster configuration data has been canceled due to an abort request

Hello,
Alert: The backup operation for the cluster configuration data has been canceled due to an abort request
Alert description: The backup operation for the cluster configuration data has been canceled. The cluster Volume Shadow Copy Service (VSS) writer received an abort request.
This is the backup of VSS which is sending this alert every morning.
Event ID 1544
All fixes I found are applied..
kb2277439 has already been applied
978527 is there too
975921 is there too..
any other id
Cluster Node /Status gives both nodes up A & B
The error is coming only on Node A...
Any idea?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hi,
Which backup software do you use to do a backup? Please also try to apply those hotfix on the Cluster:
A transient communication failure causes a Windows Server 2008 R2 failover cluster to stop working
http://support.microsoft.com/kb/2550886
The network location profile changes from "Domain" to "Public" in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2524478
Recommended hotfixes and updates for Windows Server 2008 R2 SP1 Failover Clusters
http://support.microsoft.com/kb/2545685/EN-US
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack:   at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
Seb

Hi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Why the non-cluster SQL Server appeared in the cluster nodes list

1, I install the node rs6 standalone, Why it appeared in the cluster node list by inquiry the dmv?
2, how to removed the rs6 from the cluster node list ?
by "set -clusterownernode -resource "XXXASQL" -owners NODE1,NODE2"?
But how to find the resource name? I tried to use window cluster name, SQL cluster name, and SQL role name , All of them say failed to get the cluster object.
3,how to set the owers to {}, I try below, but failed.

IMHO, sys.dm_os_cluster_nodes DMV is associated with the SQL Server
Operating System (SQLOS), sys.dm_os_cluster_nodes returns one row for each node in the failover cluster configuration.
As you are running standalone instance on cluster I am assuming this information is being picked from
OS and not from RS6 SQL instance.
As you have confirmed Is_cluster is false and if you don’t see RS6 instance in failover cluster manager I don’t think anything damaged here. Everything looking as expected, dont change owner node as its standalone instance.

CRS Install hostname being used by more than once for the same node.

Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
"You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
Has anyone experienced this error message before and know what the cause is?
Could it be a problem with the /etc/hosts file?
Thanks in advance,
M

Make sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
Also, the installer may complain if your private and public IPs are configured under the same subnet.
Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
- public name and IP addresses of ALL nodes
- private name and IP addresses of ALL nodes
- VIP name and IP addresses of ALL nodes
Hope that helps
B.

Tooltip for the Navigation Node - language dependent / translation?

Is it possible to provide language dependent Tooltip for the Navigation Node.
I tried the Portal content translation, but there was no possibility to translate the tooltip.
Talking about this:
Property ID: com.sap.portal.navigation.Tooltip
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/49/32a70ee8c45aaae10000000a42189d/frameset.htm

Hi Van Vi,
when I get your question right, you are looking for a possibility to change the text of the navigation items, not the text inside a content page, correct?
I am using MII 12.0.2. The workaround for me was to create different roles like "XMII User EN", "XMII User DE" which contain the navigation item in the according language. The content pages contain tags like Michael mentioned, e.g. {##LBL_KEYWORD} in an *.irpt page. Those tags are set using the language set for the user in the NetWeaver UME.
Michael, is there a possibility to use this {} notation in the navigation in 12.1, so I do not have to create language based roles?
Michael

Common memory place across the cluster nodes

Hi All,
I am a websphere application server v6.1 user. I am running an application that uses a HashMap to store common information in the form of key value pairs. The application works fine in a single server environment but the same application fails in a cluster environment. This happens because the HashMap information will not be available for the cluster environment nodes which were running on a different JVM�s.
Could anybody suggest a good design where in I can use a common place to store the HashMap information like queue, database or any common memory area which is available across the cluster nodes? I am not really familiar with the memory facilities offered by websphere server. (The use of a central database is the worst case I prefer as the application makes several calls to the database resulting in a deadlock and 100% CPU utilization)
And also the values to the HashMap were added dynamically so the memory place should allow me to add my values dynamically during the runtime.
Please suggest is there any other way or any links to refer to achieve the above situation.
Thanks in advance
-Sandeep
Message was edited by:
km-sandeep

For a similar scenario we maintain a version flag in the DB based on which we would reload the hashmap.I'm too interested in finding out a design without DB.

A different cell renderer for the root node ??

Is it possible to use one cell renderer for the root and a different cell renderer for the other nodes ?
Thanks.

Well I tried that and it didn't work.I do it without any problems so what how did you do it?
Hint - in the renderer compare tree.getModel().getRoot() with the value using == .
>
Basically I have a checkbox at each node. So, I tried
setting the checkbox invisible for the root. Hard work! Since you are just wanting to change the rendering rule for the root you should change the renderer.
>
But then all the nodes have an invisible
checkbox.............................

Change Primary UOM for The item

Dear
How can I change Primary UOM for the specific item to other Primary UOM, example from Piece to Unit?
Ahmad,

Hi,
Review the folloing MOS Doc.
APP-INV-43141 Error Displayed When Trying To Change The PRIMARY_UNIT_OF_MEASURE (Doc ID 1078914.1)
Also, Check out the following MOS link.
https://support.oracle.com/epmos/faces/CommunityDisplay?resultUrl=https%3A%2F%2Fcommunity.oracle.com%2Fthread%2F3535958&resultTitle=How+to+change+primary+UOM+of+newly+created+item+code.&commId=3535958&displayIndex=1&_adf.ctrl-state=vnwgftksh_126&_afrLoop=116529168856235
https://support.oracle.com/epmos/faces/CommunityDisplay?resultUrl=https%3A%2F%2Fcommunity.oracle.com%2Fthread%2F3526698&_afrLoop=116688597198923&resultTitle=Need+to+change+the+UOM+for+Item&commId=3526698&displayIndex=8&_afrWindowMode=0&_adf.ctrl-state=vnwgftksh_177

No properties can be maintained for the selected node (MTE)

Hi!
I would like to set up the user defined alerts, e.g. Shortdumps frequency for satellite system from SOLMAN.
The access of the MTE on the satellite system goes without any problem
(<SID>\...\R3 Abap\Shortdumps frequency)
When I set up this alert via System Monitoring and try to access it by double clicking I get the following error: No properties can be maintained for the selected node (MTE).
Has some one some ideas how to solve this problem?
Any helpful information will be appreciated.
regards
Thom

Hi,
Please ensure you have enough(like S_RFCACL) authoraization in both Solman and Your satellite system
Check here [Solution Monitoring - Regarding MTE|Solution Monitoring - Regarding MTE]
Thanks,
Jansi

Authorizations for the cluster PY

Dear Friends...
I have this issue at this moment...
Authorizations for the cluster PY, they want that some user can see the cluster with the exception of infotype 8 and 62, and the same process in pa30 and ad hoc query, I think in pa30 and adhoc query could use and authorization object, but I don't know if in the cluster works this objects.
if u can give me some help I'll apreaciate.

Hi Ian,
You could use stored procedure like this
IF @object_type='10000044'AND @transaction_type='U'
BEGIN
     SELECT @error=-1
     SELECT @error_message='Update denied'
END
However, it seems that you want to protect this action only for certain user?
I think it is not easy (unless you're using SDK).
The problem is, the OBTN table (OIBT only a view) only store the original user who create the batch (field UserSign). So, if user "A" create the batch, and later user "B" want to update it, but you intend to restrict only user "B" while giving access to update the status to user "A", the table OBTN still record the UserSign field with user "A" despite it was actually "B" who update it. So, stored procedure can't read that it was "B" who actually tried to update the batch detail.
Maybe you could use this workaround, you create an UDF in batch object (U_User), and using FMS to update this UDF with active user who login to B1. Therefore, you could amend above stored procedure like this
IF @object_type='10000044'AND @transaction_type='U'
BEGIN
     DECLARE @U_User AS NVARCHAR(10)
     SELECT @U_User=U_User FROM OBTN WHERE AbsEntry=@list_of_cols_val_tab_del
     IF @U_User IN('1','2','3') -- from USERID field in OUSR table
       BEGIN
          SELECT @error=-1
          SELECT @error_message='Update denied'
       END
END
Frankly, I haven't try it. Hope this help.
Best Regards,
Hendry Wijaya

HT4059 I downloaded iBooks Author in Italy so the interface is in Italian. I want to change to English for the entire interface?

I downloaded iBooks Author in Italy so the interface is in Italian. I want to change to English for the entire interface?

You would have to re download iBooks Author from the U.S. App Store. Launch the App Store then click the round flag icon bottom right side of the window. Select United States
The issue with this is that your billing credentials (regardless of whether or not it's a free or paid app) must be associated with the same country where you reside. So you may not be able to re download iBooks Author in English.
Post your topic in the iBooks Author community here.
More iBooks Author users can offer feedback that way and may know of a work around.
This is the, "iTunes Store" community for help with iOS devices.

Can Resource Group Virtual IP be same as that of any of the Cluster Node?

Hi,
Can Resource Group Virtual IP Address be same as the IP Address of any of the Cluster Nodes?
As in if my Cluster node (node-1) has IP Address, say 172.23.28.218, then can I configure a Resource Group with the same IP Address, i.e. 172.23.28.218?
Thanks,
Chaitanya

Chaitanya,
Short answer - no. The physical nodes have IP addresses which are fixed and unique. A RG group can have 0 or more logical hosts (IP addresses) associated with it, one per subnet, that are also unique.
Regards,
Tim
---

Tree node retrieving data for the 1st node only for 3 data blocks ?!

Hello alllll
i have 3 DATA BLOCKS MAster-Detail-Detail ; GL_TYPES -< GL_ACCOUNTS -< GL_COMPANIES
The Rel between 1 & 2 is
GL_ACCOUNTS.TYPE_ID = GL_TYPES.TYPE_IDThe Rel between 2 & 3 is
GL_COMPANIES.ACCOUNT_ID = GL_ACCOUNTS.ACCOUNT_IDi also have a Treewhich is retrieving data in the opposite data blocks the following code used in WHEN-TREE-NODE-SELECTED Trigger and it works fine but not for every node ;
the node selected shows data for the first node only; Say Assets but if i selected any other node it doesn't return any data ?
could any boady pls explain to me why is that happening ?
The following code is:
DECLARE
        htree ITEM;
        NODE_VALUE VARCHAR2(100);
BEGIN
IF :SYSTEM.TRIGGER_NODE_SELECTED = 'TRUE' THEN
-- Find the tree itself.
htree := FIND_ITEM ('BL_TREE.IT_TREE');
NODE_VALUE := FTREE.GET_TREE_NODE_PROPERTY( htree, :SYSTEM.TRIGGER_NODE , Ftree.NODE_VALUE );
GO_BLOCK ('GL_ACCOUNTS');
   set_block_property('GL_ACCOUNTS', DEFAULT_WHERE, 'GL_ACCOUNTS.ACCOUNT_ID = ' ||
   ftree.get_tree_node_property('BL_TREE.IT_TREE', :SYSTEM.TRIGGER_NODE, FTREE.NODE_VALUE));
EXECUTE_QUERY;
END IF;
END;
Regards,
Abdetu...

Hello Ammad Ahmed
Thanks really for reply ,i appreciate... :)
Can you explain little more what is the meaning of this?a tree block on canvas beside 3 data blockS out of 2 tables as follows
SQL> desc GL_ACCOUNTS
Name                                      Null?    Type
ACCOUNT_ID                                NOT NULL NUMBER(10)
TYPE_ID                                   NOT NULL NUMBER(1)
ACCOUNT_NAME                              NOT NULL VARCHAR2(100)
IS_CLOSED                                 NOT NULL NUMBER(1)
ACCOUNT_ID_PARENT                                  NUMBER(10)
SQL> desc GL_COMPANY_COA
Name                                      Null?    Type
ACCOUNT_ID                                NOT NULL NUMBER(10)
COMPANY_ID                                NOT NULL NUMBER(2)only table GL_ACCOUNTS has a self rel so on data blocks on forms i have out of these 2 tables 3 data blocks in the following order
GL_ACCOUNTS_PARENT on GL_ACCOUNTS has a where clause on it's property;
account_id in ( select distinct account_id_parent from gl_accounts ) on GL_ACCOUNTS_PARENT block i am displaying on 1 row:
1. the account_id ,
2. the account
3. name and account_type_name in a LOV
on the second block GL_ACCOUNTS depending on the GL_ACCOUNTS table also am displaying muti rows :
1. the account_id ,
2. the account
and a relation on form
GL_ACCOUNTS.TYPE_ID = GL_ACCOUNTS_PARENT.TYPE_ID AND
GL_ACCOUNTS.ACCOUNT_ID_PARENT = GL_ACCOUNTS_PARENT.ACCOUNT_IDon the third block GL_COMPANY_COA depending on the table GL_COMPANY_COA
am displaying the company_id & company_name in multi_rows
GL_COMPANY_COA.ACCOUNT_ID = GL_ACCOUNTS.ACCOUNT_ID
how the data will be looking in data blocksam using the following link -> Large trees - using partial tree population
http://andreas.weiden.orcl.over-blog.de/article-29307730.html
PROCEDURE PR_FILL_TREE IS
    CURSOR crTop IS
      SELECT ACCOUNT_ID VALUE,
             ACCOUNT_NAME LABEL
        FROM GL_ACCOUNTS
       WHERE ACCOUNT_ID_PARENT IS NULL
       ORDER BY type_id, ACCOUNT_id;
    nd FTree.NODE;
BEGIN
      Ftree.DELETE_TREE_NODE(itTree, FTree.ROOT_NODE);
      FOR rec IN crTop LOOP
          nd:=FK_ADD_NODE(Ftree.ROOT_NODE, rec.VALUE , rec.LABEL);
          PR_QUERY_DETAILS(nd, rec.VALUE);
      END LOOP;
END;
if any unclear... pls notify me...!
Regards,
Abdetu...

HT204053 how can i change my account for the messages app o my mac? I have my school email and I do not know how that got there i just want to use my apple or iCloud account.

im having trouble changing my account for the messages app on my mac. im not a mac wiz

From the menu bar, select
Messages ▹ Preferences ▹ Accounts
Sign out of the account. Add another one and sign in.

Change of domain for the cluster nodes

Similar Messages

Maybe you are looking for