Change of G/L Account No in Service Pr

Hi Friends,
Pls let know how change the GL Account in Service PR.
It is coming Grey fields, Now i am want to change our accounts dept is not accepting.
Pls let me know
Regards
Lakshman.

Dear,
You can't change G/L in same line item of service pr.
If you want to change G/L, Please delete your line item with ME52N then add new line item in same purchase requisition of services with ME52N.
Enter same detail of service and put right G/L in service Pr under Account Assignment tab.
Regards,
Mahesh Wagh.

Similar Messages

Changing GR/IR clearing account in Service Entry Sheet process

Hi,
We are using one Gr/ir clearing account for both Material and Service Entry sheet process.
Now for clear process we want to create new account for the Service entry sheet.
We have given blank valuation class for Service entry sheet and it has been assigned to the g/l account.
After analysing the scenario we had two options.1. Whether we can change the valuation class
or 2. we can create new G/l account.
But i had a doubt will it impact anywhere if i change the valuation class.
Can anybody advice me??
Thanks n regards,
Veena

Dear Javeed and Sadhashivan,
Thanks for your answers. Yes we have sort key set on both the accounts and also we have tried to display all the PO relevent fields but unable get through.
Please note we need PO no line wise on the ledger of adjustment accounts NOT on the GR/IR account.
1) Goods Delivered but not yet invoiced
2) Goods Invoiced but not yet Delivered
Hope I have made my point clear.
Thanks
Ayaz

After sql server 2012 installation, I have changed sql server database engine service account from network service user to system user. What is disadvantages of this process?

     After
sql server 2012 installation, I   attached my production db. Because of some reasons, i
changed sql engine account from network service user to system user by means of sql server configuration manager.
     Now , there isn’t
a problem at sql server running system. But
I have doubts that
this can produce problems later. Because sql server database engine account must have privileges that listed below;
Log on as a service (SeServiceLogonRight)
Replace a process-level token (SeAssignPrimaryTokenPrivilege)
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process
(SeIncreaseQuotaPrivilege)
Permission to start SQL Writer
Permission to read the Event Log service
Permission to read the Remote Procedure Call service
While sql server installation, setup gives these
privileges to network service user automatically, but changing user by means of sql confugarition manager does not give these
privileges.
Now, system user has privileges listed below. And sql server has been running for 1,5 months without any problems.
Log on as a service (SeServiceLogonRight)
     Bypass traverse checking
(SeChangeNotifyPrivilege) (Everyone user has his privileges. So i think that system user has this privilege also)
What problems can occur because of this situation? Shall i give other privileges to system user and restart sql server or not? And how can i give these privileges to system user listed below;
Replace a process-level token (
this can be set from user rights assignments)
Adjust memory quotas for a process
(this can be set from user rights assignments)
Permission to start SQL Writer (
? - give advice )
Permission to read the Event Log service (
? - give advice )
Permission to read the Remote Procedure Call service (
? - give advice )

Our server is windows server 2008 r2 enterprise edition. I have looked the bunch of permissions in user rights menu that is in local security policy settings gui.
And i have seen those permissions below were not granted to system user;
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process
(SeIncreaseQuotaPrivilege)
So, briefly you say, don't panic ?

Changing my Apple ID Account query

I have an apple ID that is not in the form of an e-mail address. For example: abcdefghijk99. I've had it for years, going back to when I was a Windows PC user (until I saw the light 2 years ago and switched to Apple products) for itunes purchases initially. As far as I was concerned my appleid was fine and I've used it to purchase more music and apps for my Mac, iphone, ipad and ipod since. Then I discovered a problem. Having downloaded the Find My iphone app it prompted me for an appleid in the form of an e-mail address and would not accept my original appleid. Likewise the same issue applied to the the same for finding the ipad.
So I checked it out online a little to try and see if it is possible to change your applid and found the "My Apple ID" section at https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and that under the "Manage my account" section you can make changes to your appleid account. But changing your name to an e-mail address is not one of them, at least if it is to the e-mail address that is your default e-mail address as held by itunes.
So ok, and I imagine others would suggest this, that I could set up another ID as an e-mail address and use this for the Find my iphone and ipad facilities.
But looking forward, it doesn't solve the problem at all.
1. I've built up a fair history of purchases using itunes and from the App store under my original non e-mail address and I don't want to lose them. And of course future updates to software that I've purchased from the App Store would be against my original appleid and I don't want to lose that thread.
With the advent of "iCloud" I understand that it will want you to enter your Appleid in order to upload to, sync your devices with etc., If it wants this to be entered in e-mail address format then it will not be accessible to me.
2. Appleid software is inconsistent in that for iTunes and The App Store it will allow the ID to be entered both as a non E-Mail address and as an E-Mail address. But for the Find my iphone App, will only accept an E-Mail format address as the Appleid. I think this is perhaps a legacy of MobileMe, which possibly The iCloud is going to use the MobileMe format as an Appleid. And if so that will have implications for other users who have the same type of appleid as me.
3. All I want to do is simply change my Appleid to my default E-Mail address, but it won't let me. I raised this issue on the telephone with Apple who understood my issue, did not immediately know the answer, but said would discuss with colleagues and E-Mail me back. The reply was:
"I talked about your case with my colleagues. The only suggestion that came to mind is that you consult iTunes via email and ask if they can amend the ID or if it would be possible to transfer you purchases from one account to another account."
Ok. So it led me to here, the Support area, because it seems impossible to be able to raise the issue by E-Mail with them, as much as I've tried to by going from page to page trying to find out "how to contact them".
So does anyone here have any good ideas as to how I solve my problem? Additionally is there anyone from Apple itself who monitors questions raised in this community? If so could they let me know that they appreciate my problem and how/if it can be dealt with?
Hoping someone comes up with a solution and looking forward to hearing from anyone with suggestions.

Solved with assistance from iTunes support. The main problem was that you cannot use an e-mail address which is associated with your existing account. So the answer is to set set up a new e-mail address with your Internet Service provider. Next step is to log into iTunes using your existing appleID (which in my case was a non e-mail address as mentioned in my question) and then modify your itunes id and e-mail account, both to the new e-mail address. I tried it and it worked. All downloaded history such as itunes music and apps that I have downloaded onto my devices over time has been retained. Furthermore I can now use the "Find my iPhone app" to find both my iphone and iPad. Likewise will be able to use this revised appleid to access iCloud once available and synch my apps etc., Very pleased with iTunes Support's prompt response and remedy.

Changing GR/IR clearing account

Hi,
We are using one Gr/ir clearing account for both Material and Service Entry sheet process.
Now for clear process we want to create new account for the Service entry sheet.
We have given blank valuation class for Service entry sheet and it has been assigned to the g/l account.
After analysing the scenario we had two options.1. Whether we can change the valuation class
or 2. we can create new G/l account.
But i had a doubt will it impact anywhere if i change the valuation class.
Can anybody advice me??
Thanks n regards,
Veena

not answered

Hi. I tried to change my old icloud account on a new one. After reset the settings I need to enter my old Apple ID account and password, that I don't remember.

Hi. I tried to change my old icloud account on a new one. After reset the settings I need to enter my old Apple ID account and password, that I don't remember.
I do not remember it because when I bought the my iPhone 4s in 2011 I didn't understand how it works and asked a representative to set it up for me. The representative helped me and gave a piece of paper with login and password but I lost it a long time ago.
Before resetting the settings I turned off "Find my iPhone" function, but it anyway asks me to enter my old Apple ID and password. I have the original box, documents, receipt. So how can I solve this problem?

You do not have to call US, but you need to call. Or else.
Contact Apple for support and service - Apple Support

BAPI_PO_CHANGE "No account assignment for service 0000010" SE 518 Error

Hi Friends,
I am using BAPI_PO_CHANGE to add new line item with service data to purchase order.
For one scenario BAPI give me above error is "No account assignment for service 0000010" SE 518 .
basically when i pass outline aggrement and contract item to bapi i am getting this error.....according to my observation in outline agrement account assignment is maintain as 'U' but i want to pass outline agrement as 'K' or 'N' so i am passing this into BAPI parameters ,however i feel somewhere it is getting conflict so it giving above error...
Please guide,
Thanks & Regards,
Bhaskar

Hi Seini,
Thanks for reply ..
I have pass contract number to BAPI ....and i also pass cost center and GL account to account assignment but still bapi giving same error.....I am totally stuck into this i tried a lot with different options..for other scenario BAPI works fine but when I pass contract number with account assignment 'U' and I want to change this 'U' to 'K' or 'N' for this I pass account assignment to PO line item but BAPI fails in this perticular scenario.

System not changing the G/L account when material group is changed in Pr

Hi Experts,
Issue- System not changing the G/L account when material group is changed in Purchase requistion.
Process followed:
1. Create Service Pr with material group 5040 which is assigned to valuation class 3511 and 3511 is assigned to g/l account 51370000
2. Changed Service PR material group from 5040 to 5050. 5050 is assigned to valuation class 3512 and 3512 is assigned to G/L account 51260000
The issue is when we changed the material group from 5040 to 5050 system is not picking the g/l account which is assigned to 5050 i.e. 51260000
instead the g/l remains remains as before which is there for 5040 i.e. 51370000
Please let me know how can we resolve this problem and pick the correct g/l. Please find the attachments
Regards
Badri

Hello Badari,
if you are using the item category D "Services", explanation from note 663983 - ME22(N), ME52(N): No new G/L account from material group applies:
Please consider the following:
You can maintain the material group both at item level and at service line level. If you subsequently change the material group at item level, the material groups remain unchanged in the services. As a result, the G/L account is not redetermined at service line level.
In order for the G/L account to be redetermined, you must explicitly change the material group in the service line.
Kind Regards
TomT

Verizon is charging my account for a service that was not provided.

Verizon is charging my account for a service that was not provided.
I am a LONG term Verizon customer and no one is helping.....
I work in IT, with the Network and Mobility groups, so I know what I am talking about, network access, O/S, bandwidth, etc….
I changed to a droid Bionic, from my LG (broken).   I started experiencing issues with inability to connect to a solid 4G network. The phone was not updated to Ice Cream Sandwich O/S and tried repeatedly to get update, but no go. Verizon did swap out with another bionic, but still experienced issues with inability to consistently get network access. I work in a big city, no one else was having issues at my work.
Husband left for Europe due to a family emergency mid Sept.   FIL was in hospital. I work and there is a 7 hour time difference.   We both had SKYPE on our phones. At work, I tried to contact him, using SKYPE.   SKYPE would not connect, due to the phone issue connecting to the network.   I had to call husband directly (international calls) to get updates on the condition of my ill, 96 yo FIL.
1.   This was not an issue of an app that did not function and that Verizon does not support.   I did not have access to the network, thus could not use SKYPE to make calls. This was not a choice to call international.
Verizon admitted that it was a phone issue. Since I am a long term Verizon customer and have insurance on the phone, they tried to give me yet another Bionic 9that would not work). After much discussion, they sent me a RAZR that was on the updated O/S.
Up to the 29th of Sept, I was on the Bionic and could not access SKYPE. Once I transferred over, I could use SKYPE and was not forced by Verizon to make international calls due the lack of network service that I pay for EACH MONTH.
When I received my bill for Sept, there were hundreds of dollars of additional charges.
This was due to the international calling that I was forced to use to check on status of terminally ill 96 yo FIL.
This was due to the overage of minutes that I had and was never notified of by Verizon, due to the interational calls.
I have tried to deal with Verizon on eliminating the charges. This is after having to deal with the death and funeral arrangements, service, etc of FIL. Verizon claims that I made the calls, thus I must pay.   They admitted to it being a Verizon network issue when they traded for the Razr and updated O/S, but still want me to pay hundreds of dollars in extra fees that THEY CAUSED.

szilasi wrote:
Just as a FYI.. Husband was at the hospital, not at a PC. It would be so sanitary and easy if all was scheduled properly, but guess what? Usually when someone is ill enough and has been rushed to the hospital and extended stay, you do not only contact at 6 AM in the morning.   You check on statuses, talk to doctors, etc. during the day.
I thought you said YOUR phone was the one having the problem, not his. You could have Skyped/emailed from a computer TO his phone, but you chose to call instead.
Yes, you are correct, everyone does not always think clearly when in a stressful situation such as that. Does not mean someone else should pay for YOUR actions.
Another thing I notice about your prior post is you say "Verizon claims that I made the calls, thus I must pay." but you also claim to have made the calls yourself, so it isn't necessarily that Verizon "claims" you made the calls, you DID make the calls.
Finally, I have found myself in a similar situation in the past and most likely in the near future. I also didn't(and don't) expect Verizon to pay for my phone usage during those times.

Service Accounts for Browser Services and FD Launcher (Full-text Search)

I am setting up SQL Failover Clustering (Version: 2012SP1) on Windows 2012. There are 2 options to configure the service account for Browser Services and FD Launcher :
Option 1) Using separate domain accounts, as what I have done for DB Engine and SQL Agent.
Option 2) accept the default, which is local service for
browser, and virtual account for
FD Launcher. Per documentation URL: http://msdn.microsoft.com/en-us/library/ms143504.aspx
which is the recommended one? is it option 2?
There is security note on above URL as well, but does not clearly mention that option 1 is not recommended.
Security Note: Always run SQL Server services by using the lowest possible user rights. Use a
MSA or
virtual account when possible. When MSA and virtual accounts are not possible, use a specific low-privilege user account or domain account instead of a shared account for SQL Server services. Use separate accounts for different SQL Server services. Do not
grant additional permissions to the SQL Server service account or the service groups. Permissions will be granted through group membership or granted directly to a service SID, where a service SID is supported.

Hi Luo Donghua,
In SQL Server Brower, the default logon account is NT Authority\Local service and cannot be changed during SQL Server setup.SQL Server Browser is not a clustered resource and does
not support failover from one cluster node to the other. SQL Server Browser should be installed and
turned on for each node of the cluster. SQL Server Browser should be run in the security context of a low privileged user to minimize exposure to a malicious attack.
You can change the account after the setup has been completed; For more information, see:http://msdn.microsoft.com/en-us/library/hh510203.aspx.
In SQL Server full text filter daemon launcher, on Windows Vista and Windows Server 2008, the FDHOST Launcher service account also defaults to LOCAL SERVICE. If you provide a domain account in which to run the FDHOST Launcher service, we highly recommend
that you use a low privilege account. On Windows 7 and Windows Server 2008R2 , we use Virtual Account or Managed Service account(MSA) in FD Launcher . We also need to note the account you used for
FD Launcher should be different from the account that you use for the SQL Server service. For more information, see:
http://msdn.microsoft.com/en-us/library/cc281953(v=sql.100).aspx
So I recommend you use the option 2 to configure the service account for Browser Services and FD Launcher.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

HT1918 I need to change countries on my account but I can't because I have 98 cents left on my account and there is nothing I can buy for 98 cents. What do I do?

I need to change countries on my account but I can't because I have 98 cents left on my account and there is nothing I can buy for 98 cents. What do I do?

1) Buy something and charge the balance to a credit card.
or
2) Contact Apple and ask them to remove the balance.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html

Change of Chart of Account

Dear Expert,
Please provide me your inputs on the below question.
Can we change a chart of account in Production Stage as well as development stage? If yes, under what circumstance can would one change it and what is the procedure of changing it?
regards
Sandip
Moderator: Please, search before posting

Technically, yes they can be changed. In development system it is simpler as compared to the change in production environment. There are SAP tools available for chart of accounts transfer. See the following notes.
https://service.sap.com/sap/support/notes/369036
https://service.sap.com/sap/support/notes/119906
If these are all interview questions, I'd suggest you take a good textbook on SAP configuration in Financials and Controlling modules. This forum is really for people who face realtime issues in their projects and are looking for a solution. If you are eager to learn, you are very welcome to read the forum threads/questions. There is also keyword search functionality using which you can read threads/questions that interest you!

Cannot change anything in user account and family safety, even logging as an administrator account.

My 1st user account was an administrator account, 2nd user account was a standard account. 3rd user account was a guest account of window 8 single language, however i accidentally made a mistake by setting guest account from standard account to become an
administrator account. I also set down the 1st user account from administrator to standard account and after these stupid settings, the guest account becomes administrator account anyone can access in without any password, the 1st and 2nd accounts become standard
accounts! Before this mistake, the 1st user account was the main account of mine, 2nd and 3rd (guest account) were logged in very rarely.
The problem is when i logged in guest account as administrator, i cannot set the 1st or 2nd back to become another administrator account. Something has gone strange, it has been prevented me to set the others to be administrator and the guest back to standard
account. Being as an administrator account, the guest account was totally useless in changing settings. When i logged in with 1st and 2nd account, i also cannot change anything in the user account settings (change type of user account) and family safety, all
attempts to change the user account settings was useless such as i never tried. I also tried "refresh your computer without losing files" but not worked. Please provide me some advices!
I did not find the forum for win 8 single language, so i place my question here.

Thanks for your reply. I tried to go to safe mode of win 8 by holding the shift key while clicking "restart" on the login screen. (My login screen now shows 3 account users). Then i chose troubleshoot -> advanced options -> windows startup
settings-> i went to safe mode. The safe mode only showed a complete black screen with an only window: "Administrator: cmd.exe". I did as you said (typing NETPLWIZ) and the User accounts window appeared. I went to "properties" of each
user account and set 1st and 2nd accounts to Administrator but got the error: "This user cannot be added. Access is denied." and another error window: "Usert accounts: the group membership for ... could not be updated."
Yesterday, i went to elevated command prompt as an administrator and typed "net user administrator /active:yes" with hope that the built-in administrator would be activated and i would use it for full control settings of 3 other user accounts.
But i got the error: "system error 5. Access is denied."
Now, my position is quite bad. Login with guest account which was set as administrator, i still can not have full control of this laptop, so that all attempts of mine to change the user account settings is denied. This guest account also does not have a
password at all so that everyone can open my computer without typing a password. Because access is denied, i cannot set a password for the guest account even now it is the administrator account and i am loging in it.
p/s: I tried to refresh the system but still got the error: "There was a problem refreshing your PC. No changes were made". And i also tried to restore the system, but got the error: "System restore did not complete successfully. Your computer's
system files and settings were not changed. Details: A volume shadow copy service component encountered an unexpected error. Check the Application event log for more information (0x80042302)"
I went in registry editor in safe mode and did as you said but there was no "AutoAdminLogon", "DefaultUserName", "DefaultPassword". I only saw "AutoLogonSID" and other different names...
The problem i got half year ago has still remained and recently i made this mistake. https://social.technet.microsoft.com/Forums/en-US/8ebd868c-bdfd-412e-95a6-9dc0095d431c/cannot-paste-any-online-pictures-from-any-websites-into-wordpowerpointonenote-2013?forum=officeitpro
I am a young woman who always creates mistakes when setting computer because of my carelessness.
Hi,
These phenomenon should be access rights problem, you need to check your current system User Accounts status. In my opinion, your administrator account probably disabled.
Open Run, type LUSRMGR.MSC, press Enter.
Then check your current system account which Group they are belongs to.
If there is any progress, please feel free let me know.
Roger Lu
TechNet Community Support

My pc user is nt changing at the program files though i've changed it at user account control

my pc user is nt changing at the program files though i've changed it at user account control

Hi @pastorhumphrey,
Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp you are having a difficulty with your Windows accounts. Here are two links that I think may help.
Create a user account
User accounts: FAQ
If you are still having an issue with the accounts, I suggest contacting Microsoft support for assistance.
1 800 642 7676 Microsoft Corporation Customer service
or Microsoft Contact Us
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

HT4157 I have a cellular data account on my iPad. Almost immediately after I signed up, my e-mail was hacked and had to be cancelled. I cannot get into my AT&T cellular data account now to change the billing and account to my new e-mail. Please help.

I have a cellular data account on my iPad. Almost immediately after I signed up, my e-mail was hacked and had to be cancelled. I cannot get into my AT&T cellular data account now to change the billing and account to my new e-mail. Please help.

According to the AT&T Wireless web site, you can manage your iPad data plan either from the iPad, or by using a web browser:
From the website
Log in to your account at att.com/iPadlanding using the email address and password you used during activation.
Your account information will display. Select the desired account change option then tap Next.
Read the Terms of Service, and then tap Accept.
Review the Payment Summary to ensure the details are correct. Use the Back button if changes are required, otherwise tap Submit.
Read the Confirmation message then tap OK.

Change of G/L Account No in Service Pr

Similar Messages

Maybe you are looking for