Change of image in web reports (MIME repository : SE80)

Hello,
i want to replace company logo in web reports.
i have changed the logo (image) through MIME repository in SE80 transaction, but i am unable to see the unchanged logo on portal/web reports.
What can be the issue. Is there any setting anywhere that needs to be done?
Thanks,
Shweta.

Hi,
Please check the Image name like
supported ex:
   "company_logo.jpg"
Not supported Example:
   "company logo.jpg"
   "company_logo.JPG"
   "Company_Logo.Jpg"
Concerning the missing images in the WAD please check, if the images
are available in the Mime Repository:
Transaction SE80 -> MIME Repository -> SAP -> BW -> BEx ->
Publisher -> GIFS -> WebItem_Previews -> e.g. "broadcast_prev.gif"
Check the below link:
http://help.sap.com/saphelp_nw70/helpdata/EN/44/4cd282bd414e35e10000000a1553f6/frameset.htm
Thanks,
Venkat

Similar Messages

Which way to get image for webi report?

Hi,
I have to add image to webi report. So any way is there for adding image for webi intelligence.

check this thread:
Adding an image (logo) to webi report

Time delay on seeing the changed data onto the webi reports

Hello,
I'm new to BOBJ and was hoping someone can help me with adjusting the time delay the reflects the changed data to the Webi reports.
I have a user that would update a form on our EP. Afterward, she would have to wait a while before she can see the changed data on our Webi reports.
can you please tell me the default time lag and show me where I can change it if required?
thanks.

Thanks for the reply.
Our BO is 3.1 SP4.
We just implemented PBF (Public Budget Formulation) and our forms are running on NWCE server. It's being written to our backend BW 7.01 SP8 server. I was told by our users that after she updates some new information on the form, it takes a while before she can see it on the reports. My understanding was the universe should see the updated data from our BW immediately after they refresh. Just as you both mentioned. But according to the users, its not. there's a time delay.
I'm going to test this myself if there's a delay. In the meantime and suggestion would be helpful.

How to change number format in web reports

Hi, Experts,
    Simple question, if I want to change the number format on web report as following
. . . . . . . . Actual
. . . . . . . . *1000SGD
new order   .   341.5
sales       .   567.45
if I click "Actual" then select properties, set data format from "in 1000" & "0" to "in 1" & "0.00", nothing changed in web report after refresh.
if i click one number (for example: 341.5) or "New order" to set data format from "in 1000" & "0" to "in 1" & "0.00", only this row's format is changed, others row still keep old format.
how to change whole column's data format at once setting?
thanks in advance.
Message was edited by: jie miao
Message was edited by: jie miao

Hi,
Logout and login may help you and also Delete the session in SM04 before re login. Some times system will not do complete refresh of data even though you select refresh button.
With rgds,
Anil Kumar Sharma .P

Reg: How to change Multiple Queries in WebI Report

Hi all,
I am woking in Xcelsius Dashboard. I used WebI approach for creating dashboard. I have two customers which one customer has SAP and another customer does not have SAP. so intially I have used Excell as data source. now I want to replace the Excel with BI Queries.Both having same structure.while replacing I faced the following problem.
I created one WebI report based on Excel as data source that has two Queries(Two universes).I want to replace excel based universe with BI query based universe.If I change the universe in an one query ,the univese is changed in an another query also. How can I replace two different universes that based on BI queries with existing universes ?
How can i resolve the problem?
Thanks & Regards,
Hemalatha J

hema,
As Thomas mentioned, changing one Data Provider causes the other Data Provider to get changed as well -- this is a problem for trying to change the universe on one tab and the system automatically goes and goofs up the other tab(s) as well. I'm still on XI R2 and the problem happens so maybe someone with XI 3.1 or higher loaded can confirm that this unwanted occurrence has been cleared up or not.
Thanks,
John

Changes made in the web report selection scree do not appear on webpage.

Hi
I want to add 2 checkboxes on a web page of a report. I have done the changes in R/3 ABAP report (Added checkboxes on selection screen) and also released the report for internet using SMW0 transaction. But these two checkboxes are not appearing on the web page in internet explorer.
Whenever I try to access the URL
http://www.abc.com/scripts/wgate?~service=webrfc&_FUNCTION=WWW_GET_SELSCREEN&_REPORT=ZWR_PO_DELIVERY&_TEMPLATE=po_selscreen
it redirects it to the URL below
http://www.abc.com/scripts/po.asp?SESSION=PRD:ebgwebap:0000.00f5.7e1af317.e4db&SELD_EINDT_LOW=26.04.2008&SELD_BEDAT_LOW=01.04.2007&SELD_BEDAT_HIGH=26.02.2008
What should I do so that these two checkboxes would start appearing on the webpage?
Edited by: Pratiksha Parab on Feb 26, 2008 11:28 AM

thats difficult to say without seeing the code in the template.
when you dont supply any _tempate value in the url, the system by default uses
WEBREPORTING_SELSCREEN template.
your po_selscreen may be a copy of this and modified to change the look and feel or something like that. compare these two and see whats causing the selscreen from appearing completely

Hyperlink on image within webi report

Hello,
is there a way to add a hyperlink on an image within a webi report?
I tried placing an image in a separate column and checked Read content as hyperlink and placed the link .
but unable to click on the image.Placed jpg image.
I am using BO 4.0 sp6
Even i tried
<a href="www.google.at" >
<img src = "URL for the image" />
</a>
even i followed this thread 2100596 but couldn't get the solution.Screenshot has been attached
Help me!!!!
Regards
sushma

Hi Sushma
plz follow the step properly,
step1 : create a blank column
step 2:right click on the blank cell
step2.1:
http://PFS-DEV:8080/BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=AZusMTK0dcNDnR9kAwyD0Gg&lsSEnter the Calendar Day=&lsSSelectGL=
past this link in above
click on parse
after that click on ok
step 3: go to www.google.co.in
step4: right click on image of gogle
select copy image location
step 5:
"<a href=\"http://PFS-DEV:8080/BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=AZusMTK0dcNDnR9kAwyD0Gg&lsS%20Enter%20the%20Calendar%20Day="+URLEncode(""+[V_PromptDate])+"&lsSSelectGL="+URLEncode(""+[var2])+"\" title=\"\" target=\"_blank\" nav=\"web\">"</a>
edit the hyperlink
add the below line in above line
<img src="https://www.google.co.in/logos/doodles/2014/world-cup-2014-27-5917140490125312-hp.gif">
<a href=\"http://PFS-DEV:8080/BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=AZusMTK0dcNDnR9kAwyD0Gg&lsS%20Enter%20the%20Calendar%20Day="+URLEncode(""+[V_PromptDate])+"&lsSSelectGL="+URLEncode(""+[var2])+"\" title=\"\" target=\"_blank\" nav=\"web\">
<img src="https://www.google.co.in/logos/doodles/2014/world-cup-2014-27-5917140490125312-hp.gif">
</a>
Note
dont create a variable.
note
after putting the above formula in blank cell
right click on the cell and select format cell
select the DISPLAY
and select the read content as HTML
IMP after selecting the HTML then only you will see the image

Changing values in the web report

Hi All,
For ex. I have the following scenario.
I have a web report in which I have a table item which is displaying the query result. The user wants to have a facility to change the Key Figs, if they want, directly on the report, it means when the user runs the web report and if he says something to be changed, he will directly change the value on the report and will click something like a button to save the changed value back in the infoprovider.
Is this something possible?I came to know that we can do this sort of things using BSP but I am not sure how to make the table item to accept some changes and how to link to a BSP Program.
Could some one please help me in this..
Best Regards,
Nene.

Nene,
If you want to know if it is possible , here's how...
1. Use a BPS layout ...
2. Create a BSP layout for the same
option 2 :
Create a BSP page which has a textbox for accepting the value and a submit button.
On clicking the submit button , based on the parameters selected by the user , update the ODS. Remember you cannot update the cube because it does not have overwrite capability. However , declare the cube as an export datasource and then call the function module for the data source and push in the data for the same inside the BSP page.
Hope this helps..
Arun
Assign points if useful
Message was edited by: Arun Varadarajan

Changing Text Headings in Web Report

Hi SDN,
Can you please assist us in this scenario, as i have not worked with Table Interface Class previously, and if you can help out with the steps it would be much appreciated.
We have created a query which uses 2 structures in the Rows area. To this extent, we have dragged the fiscal year period characteristic in the column area.
Rather than being able to use a 3rd structure, we now have in the columns area
JUN 2006 | JUL 2006..... | DEC 2006
What we would like to see instead is:
JUN 2006 | JUL 2006..... | DEC 2006
Actual Forecast Forecast
If you can provide sample code and or steps to achieve this situation, it would assist us greatly.
Thank you.
Simon

Hi SDN community,
I found a document which seems to have all the methods with examples i am looking for.
if you would like to be made aware of the powerpoint presentation called:
BW Web Reporting Working with the Table Interface
by
Gerd Danner,
BI&W RIG Europe, SAP AG
You can find it on google.com
by searching for the Title: "BW Web Reporting Working with the Table Interface
https:/.../uuid/2e7ca56a-0901-0010-93bf-914c0848438f?rid=/library/uuid/0e7bce90-0201-0010-e78b-c635673602ba

Changing background image of web-page

I'm having problems changing the background image on the web-page. I want to use a custom image (one which I own.) But when I use the Page Inspector function to change it - it only changes the bottom half of the page with my custom image. The top half is the original iWeb template. I've tried adjusting the page size numbers, but the image simply does not move up! What's up with that? How can I change the entire background of the page to use my custom image? I feel like it should be a lot easier than it seems.

The Darkroom is one theme that can't be user modified. You would be best served to create a blank page in the Darkroom theme, make a screenshot of the background w/o the spotlight in the center (a slice about 800 x 50 pixels would work well) and use it for the browser background in the Black theme so you get the white/light color navbar text.
Happy New Year

How to upload image in mime repository

i want a report to upload image in mime repository.
, i want a report to delete the image (every week) from mime repository
and how to get the url of that image ....
Regards
Anbu B

Hi,
Hope the following Threads will help you regarding your problem.
How to upload an image to mime repository to display in alv grid with objec
Thanks.
Nitesh

Changing Webi Report Data Provider With Prompt

Hi All,
I am trying to change Data Source of a Webi Report using RESTful Web Services. Fo this I have referred code on Changing Dataproviders for a Webi Report using RESTful Web Services Post.
I am able to change data source for Webi Reports without Prompts but it is not working for Webi Reports with Prompts.
Can anybody help me??
Thanks & Regards
Swapnil Kulkarni

Hello Swapnil,
In order to perform a change data source, you have to answer the prompts (like in the regular Webi UI). In this kind of case, RESTful webservice will send back the list of parameters needed after you submitted your target mappings. Then, you have to answer prompts and send all the information (mappings + prompts answers).
Does it make sense?
Best regards,
Anthony

Error while refreshing WEBi Report : Supplied XML Invalid

Hi,
I have a universe buit on BI query in production environment.
I changed the query in BI directly in PRD. The only chnage i did was ,unhide the keyfigure which was hidden originally as i wanted to see the data it brings in BEx analyzer.
Then i agian chaged that key figure to Hidden.
now the WEBi reports which are built on the universe which uses this bi qury is not getting refreshed.
It gives the error : Supplies XML invalid
I refreshed the Universe and Parsed it.there was 1 parsing erroe in Filter.Still i exported the universe.
Now generally the WEBI reports start working after re exporting the universe, but this time it is not working.
What can be done in this case.???
I dont think it is because of parsing error as i have exported the same universe earlier with same error and reports worked fine that time.
following is in the WHERE section of the filter:
<FILTER KEY="[!V000006]"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Posting date','D',,mono,free)"/></CONDITION></FILTER>

How you tried editing Webi report ?
Its possible that your changes to Bex query while propagated to Universe after structure refresh, have changed some of the objects, and that change is not in Webi report yet, you'll need to edit it and maybe re-map objects.....

Web report colors

Hi
Any one can tell me how to change the colors of web report.
I searched forums but I dint get relevant answer.
thnaks in advance
Nikitha

Hi Nikitha,
If you want to change the chart color do the following.
Right click on chart ->select Edit Chart->Select ur chart->Click Next 2 times->You can see all series->here you can give individual colors to each series.
Hope it will work...!!
Assign points pls.......
Best Regards,
SG

Standard Webi Report Templete ?

Hi all,
i was asked to prepare some naming convnetions and standard templete for webi reports .
can any one please share your ideas and suggestions .
what exactly a WEBI report contains ?
how to insert a company logo to a WEBI report ?
i have a logo , but how to insert it as text in the blank cell?

hi,
Answer to the question "how to insert a company logo to a WEBI report ?" is
Place your company logo image in the below folder.
<BO Install>\BusinessObjects Enterprise 12.0\images
In WEBI report,
1. drag a blank cell on to the report.
2. select the properties tab for blank cell
3. click on Background image ellipses button.
4. specify value for image from URL: boimg://COMPANY_LOGO.png
5. Display : Horizontal Tile (or choose the option as required)
Your company logo appears in blank cell. Resize the cell such that logo appears fully.
what exactly a WEBI report contains ?
It can contain tables/charts and independent cells
Standard templete for webi reports?
WEBI report has 3 parts
Report Header: Title, Date time, cells etc...
Report Body: Tables, charts, cells to display totals, parameter values etc...
Report Footer: Copy right information, Page number etc...
Naming conventions can be as per your company standards. Ensure readability and Understandability while naming.
Regards,
Vamsee

Change of image in web reports (MIME repository : SE80)

Similar Messages

Maybe you are looking for