Change of Infoarea causes inactive transformations & DTPs!?

Hi all,
what I'm trying to do is simple to move one DSO object from one InfoArea to another one. The result is that I do get inactive transformations and DTPs from and to this DSO object in the following system!
Is this a system bug? Did anybody also encounter this problem? (I guess I once had this issue with another customer and we opened up an OSS message at SAP but it's some time ago and I'm not anymore aware of what the result has been...SAP OSS doesnt provide any notes so far...)
I'm happy to receive your comments,
Best regards,
bivision

what I'm trying to do is simple to move one DSO object from one InfoArea to another one. The result is that I do get inactive transformations and DTPs from and to this DSO object in the following system!
What do u mean by in the following system ? After moving DSO to another infoarea, if u transport that DSO alone, then the related transformations and DTPs become inactive. Its quite common.
U should collect related transformations and DTP along with DSO/Cube.
Moving ODS from 1 AC to another AC ?
Edited by: Mr. V on Feb 4, 2010 4:48 PM

Similar Messages

  • Active vs. Inactive Transformations

    HI,
    Just wondering the reason for inactive transformations (white ribbon)?  Why would you have inactive transformations?  Do inactive transformations get executed, or only active transformations?  Also, I'm seeing an inactive transformation based on a data source that no longer exists.  Why would someone keep this as part of the data structure in RSA1?
    Thanks,
    Kevin

    Hello,
    Just wondering the reason for inactive transformations (white ribbon)? Why would you have inactive transformations? Do inactive transformations get executed, or only active transformations? Also, I'm seeing an inactive transformation based on a data source that no longer exists. Why would someone keep this as part of the data structure in RSA1?
    1. Inactive Transformations:
         There are many reasons, to have inactive transformations -
         If the target infoProvider (either DSO, InfoCube or master data attr , text) has been changed, meaning if you add any new field to any data target and activate the target. This will result in inactivation of transformation and also DTP will be inactive.
    2.  I'm seeing an inactive transformation based on a data source that no longer exists?
         This should not happen, when you delete the source (in your case the DataSource) then the transformation is automatically removed.. since there is no connection between the two (source and target). However, I shall advice you to verify the DataSource and check if it is still in use. If not, then you can delete the transformation and also DTP associated with the same.
    Hope this helps.

  • Inactive Transformations and DataSources in Production System.

    Hi Experts
    We are working on BI 7.0 engine within Solution Manager.
    We had some issues with DataSources initially while transporting BI Objects from Devp to Prod. We logged it into OSS and followed their procedure to redo the transports.
    In the process, the issue was resolved but 2 New Transformations are created one for each Data Model (since I have only 2 InfoCubes) automatically and is the working model now.
    Actual Transformations from Devp became Inactive in Prod and also there are 2 Inactive DataSources which are also from Devp. 2 New DataSources are again from Devp.
    When I tried to Delete these unwanted Objects from Prod (I asked the Basis to Open Prod for me though this is not the best practice), it is asking for a Request ID. Also, since the Project has Gone Live already, I am scared if I might disturb the Production System.
    Kindly, advise what best could and needs to be done.
    Thanks,
    Chandu

    Initially, we implemented BI-HR module with standard content, which 3.x content (transfer / update rules)... in parallel we also did transformations & DTPs (BI 7.0 model).
    Since, client wasn't sure with conversation of transfer rules (has lots of routines) to transformations & DTPs . So we transported both the models to prod sys... We created daily load process chains with transformations & DTPs... The actual plan was, if PC loads fails, then to go for manual loads of 3.x model...Fortunately 7.0 models was successful...
    Then one month later, we deleted those transfer / update rules and 3.x datasources from prod sys, on the weekend (process chains runs only week days) without any issues...
    We captured those deletion requests and deleted them from SE09 by unlocking them in SE03.

  • Transformation & DTP deactivated in source system

    Hi,
    I am trying to load the data from one BI System to another BI system. I am generating Export Data Source for that .
    But the Issue is that when i am doing this, in  the source system transformation & DTP got Deactivated.
    Can any body tell why this happens?
    ( My source system is BI Production so it is not allowing me to do any changes)
    Thanks in advance,
    Vaibhav

    Hi,
    You might not be having Authorizations to edit the DTP and transformations in Production server.
    If the production server is closed... run the program :RSDG_TRFN_ACTIVATE
    Make sure to check out check sap note 1408161. For BW 7.0 it is SP25...
    If your system is not having the SP25 its not possible to use the above mentioned program.
    The other way is to re-import the DTP and transformation to Prodcution in new TR.
    Regards
    KP

  • How to activate transformations/DTPs related a DSO all together?

    Hi
    In Bi, i am changing a DSO Description Name only but it invalidates all its associated transformations/DTPs. Then I need to activate all its Transformations/DTPs to activate one by one. Is there any way I could activate all its Transformations/DTPs alltogether.
    Thanks.
    Edited by: Harpal Singh on Oct 11, 2010 9:09 AM

    Hi harpal,
    There is no standard program given by sap to activate Transformations and DTP. you need to activate them manually.
    for transformation you need to activate them manually or you need to create your own program to activate them.
    Check the below link which shows a program to activate the Transformatins and DTP
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d02513b2-7fb6-2c10-3a8b-887fc115d61b?quicklink=index&overridelayout=true
    If your service pack is 25 and Bi 7.0 then there is a program to activate the Transformations
    Got the below note which give the Program name which can be used to activate the Transformations.
    Note 1408161 - Program for transformation activation
    Program to activate transformations RSDG_TRFN_ACTIVATE
    But the its available only from the BW 7.0 it is SP25.
    Transformations in active
    Regards
    KP

  • A seeming small change by Verizon causes major monetary and unrecovera​ble damages

    A seeming small change by Verizon causes major monetary and unrecoverable damages
    Back, I think in March or so, Verizon changed how they bill. Prior to this time frame my elderly mom paid the phone bill and I paid the DSL bill. The DSL bill came on my name and I paid by credit card and the phone bill came under her name and she paid by direct debit. She will not use a computer.
    So, they make both bills on her name and won't change it. They did, however, allow the payment from my credit card.
    The first unfortunate consequence was the internet speed suddenly dropped in speed by a factor of 2 to 1.5/364 and it did take me probably a month to notice it. NO ONE that I called was able to find the problem. It took multiple attempts until some bright “call in technician” said the problem is on their end and could be fixed in software. Thus, I believe, because of the name change, the provision changed too. The phone line crapped out too at this time.
    The troubleshooting was stupid too. I took another modem and connected it directly to the NID and directly to the laptop and the technician on the phone said, it's either in your house or your modem and wanted to send me a new modem which they did. I don' get it. This is the wrong conclusion.
    This shows the need of modems like Westell 2200 and the Westell 6100 because of the ability to measure line statistics and provisioned data rates.
    Verizon sent me a D-link model DSL-2750B modem which I have to return because its just plain old stupid. It boasts Wireless n and the wired ports are 10/100. What's up with that? Next, there are no line stats and a horrible interface, akin to Verizon's website. Still can't figure out how to put it in Bridge mode. I own a D-link repeater and the interface is fine.
    I asked them what modem they would send me and they would not tell me, so I got whatever piece of junk they had lying around.
    I have now purchased a Network RAID array with no wireless access and with ~400 mb/s access rates. Yep, really stupid router.
    Because of the number of outages, I have to be able to quickly switch from a bridge connected modem, Westel 6100) to one that is connected in direct mode, a Westell 2200 It's almost easy, but not quite, since the equipment is up in the rafters in the laundry room. The DSL cable is commercial terminated CAT5, which is rare. The modem is within 6' of the NID.
    Plans include, the ability to switch the DSL line with a switch with positions for Modem #1 (Bridge), Modem #2(Wired), #3(RJ11 – Normal wiring) and #4: RJ-11 (Reverse wiring) and moving the direct connect jack for easy access. In any event, testing with the DSL modem at the NID is the gold standard.
    In progress, is a 48 port Gigabit patch panel for phone and Ethernet, A separate 24 port RED patch panel will be bridged for phone.
    I have already upgraded my network infrastructure to include a UPS for the network infrastructure and POE (Power over Ethernet) for the DSL modem. The UPS backup does not backup a repeater although it may in the future.
    Now, let's go back to this seeming innocuous billing change.
    So, this constant having to access the modem in the alternate configuration and a medical condition (migraines) that makes it hard to think clearly. So, in one of these episodes, I placed my laptop on top a container that was soaking laundry.
    So, the LCD screen has to be replaced at $300 and the battery had to be replaced. Then the Ethernet cord to the modem got pulled and caused the laptop to fall on the floor. It worked for a few weeks and then suffered an UNRECOVERABE hard drive crash.
    During this time frame, in fact over a 2 day period. My mom ended up in the hospital and to a rehab facility. My car ended up staying in the shop for a few days because of parts unavailability. My hard drive crashed and their was water in the basement. I don't have time for this.
    Recovery would have cost $2004.00, if it were possible. I only have a drive image from 2011 which I have yet to try to use. I' now running UBUNTU Live rather than Windows 7 Pro. Some of the very important stuff was backed up on Flash, but a lot of stuff is gone forever.
    Plans are to contact the billing office and the attorney general's office in the state where billing questions need to be resolved.
    The last outage, fixed on July 27, was flagged as a phone outage by Verizon, when 18 routers supposedly died. 18 routers suspiciously means that they they were not adequately protected against surges. Verizon should look at the way DelMarVa Power reports outages: see: Delmarva,  Put the usual World Wide Web Prefix and the COMercial domain suffix
    For god's sake, quit making the website circular. I though Yahoo was the expert in that. I never visit Verizon's website unless there are problems. I mistaking thought I could find outage information, say using my phone's browser. This time I had to purchase service from CLEAR internet to ride me through this fix.
    I know, you can't fix stupid and you can always find a better idiot. Comcast is looking more attractive.
    Compensation of or my loss I will probably never get, but maybe with the help of the attorney general I can get the billing fixed. I do have power of attorney. Now, of course, the name the Verizon Website addresses me as is not right on this forum.
    All, basically because of Verizon's unreliable network, incompetent people and the lack of maintenance of copper lines. The problem is, “We have little choice”. Currently, we need traditional land-line service to support an Emergency Response system. It's unclear whether digital phone lines support Faxes and alarm monitoring reliably.
    I'll bet that there is NO WAY to tell Verizon if a service address as special needs like Emergency Medical reporting via phone or Internet, so that priorities for repair can be done properly. Utilities have that capability. Those ares with people with oxygen generators or other medical equipment get a higher priority,

    That should not be happening.  I sympathize with both of you (you and the the person who strated this thread).  That sounds like the reason I would never want Dish. 
    I am fortunate that my service with Verizon Fios has been very reliable and that I haven't had too many issues over the years.  But don't get me started on Verizon Wireless.  I am through with doing any more business with them once my cell phone minutes run out.  I love it when they say they have done everything the could to investigate such a simple issue with running my debit card transaction wrong and blaming it on my bank, i.e. running it through as a "debit" when I choose "credit" all of a sudden now  two times in a row after 4 years of doing it right as "credit".  And now they consider the issue closed on their end when nothing has been resolved.  That's no way to treat a long time customer and I really felt treated like I was a bother to them.  It's not like I ever paid them much money for this pre-paid cell phone service that I have used infrequently but I was really mad at the way they just wrote this off and pretty much told me "too bad".  Talk about "customer non-service".  It's also very hard to track the number of minutes left on my balance.  I'm due for an upgrade anyway.  I want to switch to the I-Phone from this flip phone but never again with Verizon Wireless.  T-Mobile is way more attractive.  Verizon  Wireless is not only an entity separatedfrom Fios but it's definitely a much different animal and their customer service has really gone downhill.  When you're treated like they don't care, it's maddening.
    My customer service experience with Fios overall has been far superior to that most of the time.  My setup is simple and even though there are some people who will inevitably complain about anything just to vent, I definitely believe at least some of what is posted here.  And switching TV, phone, and Internet providers is a lot more involved than switching a cell phone provider. 

  • My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

    My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

    Read and follow Apple Support Communities contributor Niel's User Tip: kmosx: I accidentally set a disk's permissions to No Access

  • BI Load issue in the transformation/DTP after SP 17

    Hello,
    After SP 17 applied in our BI system, we are having load issue in one particular transformation/DTP.
    See below the errors:
    u2022 Messages for 101 data records saved; request is red acc. to
    configuration
    u2022 Thee is no active nametab in the system, although an active ABAP/4
    Dictionary object was expected. Reactivate the ABAP/4 Dictionary object.
    Also I have activated the DSO, transformation and DTP. Also I went to SE14 and try to adjust my DSO, SE11 and activate the table but still having the issue.
    Can someone advise me on how to resolve this issue?
    Thanks a lot.
    Cesar

    Hi,
    Do the following: In BI, run transaction SE38 >> RSDG_CUBE_ACTIVATE to recreate the Metadata information
    for the Info-provider.
    Then execute another program via SE38: RSDD_RSTMPLWIDTP_GEN_ALL
    See Note 1161940 and 1152453 for more details.
    Regards,

  • Finding Inactive Transformation

    Hi Guys.
      Is there any programe to find out all the inactive transformations in BI 7.0 system.
    Thanks in advance
    peter b

    Hi,
    Goto SE11 there check the following table RSUPDINFO.
    Here Using Object status field u can identify the active update rules.
    Hope it will solve ur problem.......
    Best Regards,
    SG

  • The bookmark tab went from the right side to the left side. I did not change that. what cause the change from the right side to the left side?

    The bookmark tab went from the right side to the left side. I did not change that. what cause the change from the right side to the left side? Also the the Mozilla Firefox tab on the upper left hand corner changed.
    Its was a red colored tab and now its blue in color. I did not change any thing!

    Hey jimmiet,
    There were some recent ui changes around the downloads manager. What version where you on before? Anyway, you can customize things in Firefox really easily. Take a look at [[Customize Firefox controls, buttons and toolbars|this article on customizing Firefox]] for details. Should be a piece of cake to move the bookmarks button.
    As for the color of the button, you might be in [[Private Browsing - Browse the web without saving information about the sites you visit|Private Browsing]] mode. That changes the color of the button from orange to a purplish color.
    Matt

  • Reg: Inactive transformations

    Hi All,
    Some times while transporting objects into Productions, transformations getting inactive.
    In that case to activate transformations, we will retransport inactive transformations or we will open the Client ( very rare cases) and makes the inactive transformation to active in the system.
    For this shall we write a progarm to make inactive transformation to active version in production.
    Can you please provide ideas how to start this.
    Thx,
    Raj

    Hi reddy,
        i think might be the order of objects are not moving in sequence. while moving objects please make sure the order and this can be avoided.
    transport sequence:
    Info objects, data targets/info providers, data sources , transformations,infopackages etc
    mahesh

  • Inactive transformations

    Hi
    We have few inactive transformations in prod due to some other reasons.Is there any way where we can activate them through a program or function module in production itself without client open.
    Thanks
    Pratap.

    hi,
    i think there is no tool to activate transformations.
    Better activate them in Dev and transport into Production.
    Hope this helps....
    Reg
    Pra

  • I was an Exchange student in the USA and I had a American Credit card. It expired, now back in the Netherlands I found out I still need to pay some bills. But I can't change credit cards, cause I'm not in the USA anymore

    Yeah, so I had a American credit card from bank of America, and I closed my bank account before I left the country.
    When I came home I found out I still need to pay like $2.00 but I can't change the country cause I need to pay my bill first,
    but I can't because I don't own a American credit card anymore... what do I do??

    Contact a friend in the USA and have them mail to you a cheap US iTunes Gift Card that you can redeem in your US account. Or, if a friend has an iTunes account, they can use the iTunes app on a Mac or PC to buy a cheap electronic gift certificate for you. The second option would be faster.

  • Inactive transformations and DTPs after running BDLS

    Hi Experts
    I ran the BDLS job, Restored , Activated and Replicated the S.S.
    Some of my transformations and DTPs got inactivated . Does any body have any clue of why this happened.
    My observations was when i restored it gave an error message " Error 2 in RFC_VERIFY_DESTINATION "  although the S.S check says OK and i am able to do loads and during replication process of S.S it was saying " Function module  /SDF/AL_MAP_TRANSID_LOGH does not exist."  I am not sure if the above errors/observations have any link to some of Transformations and DTPs getting inactivated while the rest of DTPs are active.
    Please advice
    Thanks
    PK

    Prabu,
    have you solved this issue?
    I am also faceing same issue after BDLS - source system change to BIQ, All DTP's are still assined to OLD-Logical system.
    Please let us know how you solved it.
    Appreciate your response
    Shashi
    Update:
    Note# 1142908 fixed my issue..
    Shashi
    Edited by: Shashi on Sep 10, 2008 7:22 PM

  • JBO-35007 row currency has changed - can timeouts cause this?

    A user of mine (JDev 10.1.3.1 ADF BC/ADF Faces) is experiencing the famed JBO-35007 row currency has changed error message after a period of inactivity (~35 minutes).
    Suspiciously sounds like a timeout to me. Can the row currency validation be invalidated by a timeout in the ADF framework? What side of the framework tracks the row currency? I'm guessing it's ADF Business Components. Can the timeout of the AM cause JBO-35007?
    Any help appreciated.
    Regards,
    CM.

    Hi John,
    it depends on the fact the failover feature is enabled or not (jbo.dofailover).
    When enabled, the HttpSession cookie that is stored in the HttpSession will also be stored on the browser (browser cookie), so that the framework can re-establish the link between a new HttpSession and the pending session state.
    As 35 minutes is the default of the HTTP session timeout, I suppose that Chris is working in failover mode, and that BC4J has some problem to re-activate the current row (maybe its key ?) correctly.
    Regards,
    Didier.

Maybe you are looking for