Change of item cat TAC in Sales order

Dear experts,
while creating sales order which is with variant configuration ... in the sales order line item item cat TAC is in greyed mode.. but i wanna change the item cat....
regards
abhi

Hi,
The item category is defined by SO type, item category group, usage and item category of the higher level item. The item category for configurable material is TAC. pl check the path SPRO-IMG-sales and distribution-sales-sales document item-assign item categories...execute....check in the item category assignment overview which item categories are allowed for the combination of order type,item category group, usage and higher level itemcategory. if only TAC is maintained then add the other item categories that you want to be manually entered for this combination in the field MItCa.upto 11 manually allowed item categories can be maintained.
Hope this helps....
Regards,
vijay kumar

Similar Messages

  • Item Cat field on Sales Order is modifiable after billing

    Is there any way that the Item Cat field on sales order line items can be made non-modifiable after billing?

    Hello Lisa,
    The item category field should not be ready for input after billing.
    Perhaps you have some modification that is making it open for input. Please check USEREXIT_FIELD_MODIFICATION in MV45AFZZ to see if there are any modifications relating to the field VBAP-PSTYV.
    Also the information from OSS note 208245 will help you to analyse the issue further.
    I hope this helps.
    Best regards,
    Ian Kehoe

  • Problem after change item status procedure in sales orders.

    Hello experts,
    I have changed item status procedure for sales orders. But now all BDoc with queue name CSA_ORDER_xxxxx remain in state 'Written to qRFC Queue (intermediate state)' and needs to be reprocessed manually.
    No problem reprocessing.
    Have somebody any idea ?
    Best regards
    Juan Salom

    Hi,
       Is your inbound queue un-registered(type U)? Look at trx.
    SMQR
    and see if it is in un-registered. If yes, select the CSA_ORDER_*** queue and click on
    Registration
    button.
    If this does not help, re-generate your Bdoc services (for Bdoc BUS_TRANS_MSG) using
    SMOGGEN
    or
    using the generation workbench.
    Then try the delta once again and observe for queue and Bdoc status in the
    SMW01
    Hope it helps! Reward if helpful.
    Regards,
    Sudipta

  • Item Category determination in Sales Order

    Hi
    How to know, how item category determined in Sales Order.  Is there any analysis available in Sales Order level, similar to output or text determination.
    Problem here is in a particular sales order, item category is different compared to configuration.  Nothing is recorded in change log.  How to know, whether system determined this item category or user changed manually.
    Regards
    Uma

    Hi
    Problem here is in a particular sales order, item category is
    different compared to configuration
    I cant take this arguement
    Sales order item cate will picked via the config maintained in VOV4
    item category is different compared to configuration
    Configuration someone might have changed after that sales order created
    Nothing is recorded in change log. How to know,
    whether system
    determined this item category or user changed manually.
    During order creation if you are inputting the allowed manual item category manually in salesorder then that is not a change
    Hence it doesnot get recorded (VA01 T code)
    During order creation  a default item cate gets determined if you chnge that to manual, then that is also not a change
    Hence it also doesnot get recorded (VA01 T code)
    But in VA02 if you change the item category manually then it is recorded in change log
    No item category determination analysis is available in standard and not reqd too
    In your case only this could have happened
    Configuration someone might have changed after that sales order created
    Regards
    Raja

  • Header and Item Incoterms different in Sales order

    Hello SAP Guru's,
    I have an unique issue of Incoterms in Sales order item being different from the Header, when this happens any change to the header Incoterms is not getting copied to sales order Items.
    The issue is due the different Division maintained for Sales order item in the Material master, which is fetching the Inco 2 from the Different Sales area for this is customer.
    This is fine as per design where Item category is checked for Business data and Sales Document type is checked for different Division in the config.
    However the Business would like the Header Incoterms to be copied to all items and any change in Header should also be copied to Line items also.
    We had narrowed down on Couple of Alternatives:
    Remove the Business data allowed check in the Item category config
    But this would allow all Business data to be copied from sales order header to items
    2. Make changes to VBKD user Exit during Sales order creation to copy the Incoterms from Sales order header to items
    But this is causing multiple lines in VBKD and some issues while adding new items in VA02 ending with an Update termination.
    Would like to know whether there is any other Option whether there would be least impact and also would like your advice on the better Option between the above two Options.
    Thanks and Regards
    Mohammed Roshan

    Hi Lakshimipathi,
    Finally we removed the Business Item check in the Item category which is causing the Header incoterms and any changes in Header incoterms to be copied to Sales Order line items as required but we have an issue where Sales Order item Pricing date is being greyed out due these changes, Currently the Sales order Pricing date is being determined through a Z table triggered from a User Exit which was also editable in Sales order item level.
    Due to these new changes Sales order pricing date is being determined in the header and getting copied to the Sales order line item thus greying out the Sales order item pricing date field.
    Would like to know your thoughts on how removing the Business Item check in Item category in VOV7 is causing the grey out of sales Order item pricing date, where the Business can modify on certain occasions and what would the workaround to restore the functionality of Sales order item pricing date.
    Appreciate your inputs on this.
    Thanks and Regards
    Mohammed Roshan

  • Do not change the payment term created a Sales Order with reference

    Hi Gurus,
    Do not change the payment term created a Sales Order with reference to a contract where the payer of the change in Sales Order.

    Hello ,
    As per my understanding , you do not want the payment terms to be changed even if the payer partner function is changed ,
    as standard sap redetermines the payment terms with change in partner function, you may use the exit
    USEREXIT_MOVE_FIELD_TO_VBAK- header level
    USEREXIT_MOVE_FIELD_TO_VBAP- Item level
    in this you could write a small code which will not change the payment terms when payer is redetermined
    hope this helps
    Thanks
    akasha

  • Changes Allowed on the 3rd Party Sales Order when PO is created

    Hello,
    We have a requirement to change the Sales Order even if the PO is already created for teh 3rd party order. I am not sure which fields and what changes can we do if the PO is already created for the 3rd Party sales order.
    Can you please guide me in pointing to the configuration or any user exit that we can control the field changes on the 3rd party sales order when teh PO is already created.
    Thank you!
    Chandrakant

    Venu,
    FIRST ANSWER THE BELOW TWO QUESTIONS.
    1. Did you understand what Shiva has mentioned?
    He has clearly mentioned that  you can change the PO qty and in standard it self the same PO changed  qty will be reflected in Sales order schduline lines qty, and he also mentioned that if this is not happening then advised to refer the Note 1361281.
    2. Did you read the note?
    It says that It will occur if the sales order line item is part of the delivery group or if you have set the complete delivery indicator for the sales order. And it also advised to apply the program code to over come the issue.
    Please note: before commenting others just check once in system then talk, don't just blindly through the ball, it will not have good results.
    Before also mentioned the same, but you still repeating the same.
    Sorry Moderators that i have mentioned some lines in the Note here.
    thanks,
    Srinu.

  • System doesnt let me change the delivery quantity greater than sales order

    Hi,
    In delivery document , when I change delivery quantity greater than related sales order quantity , system just show the Message no. VL363 but let me change the quantity.
    Is it any way that system do not let me to change delivery quantity greater than its related sales order?
    thanks.
    Lida.

    Is it any way that system do not let me to change delivery
             quantity greater than its related sales order?
    Go to zeroVLP,  select the item category and maintain "B"  for the field  Check overdelivery

  • Billing date at line item level in a sales order

    HI!
    Can anyone let me know the significance of billing date being present at the line item level in a sales order?
    And why does it get changed as per the Requested delivery date if the Prop. Pricing date in the maintanenece of sales doc type is set  as 'A'?
    Can it be different for different line items?

    Hello Asha,
    Can anyone let me know the significance of billing date being
    present at the line item level in a sales order ???
    The comprehensive information is available at SAP technical help(F1) for the "BILLING DATE" field at Sales Order line item level...Before raising these type of questions, i would urge to  conduct initiate analysis and then post at SDN forum if you are unable to find out answers...For your quick reference, i have extracted the same description for Billing date from SAP techincal help (F1) and pasted below.
    Billing date for billing index and printout
    +The date on which the billing is processed and booked for
    accounting purposes.+
    Use
    +You can use the billing date as one of the selection criteria
    when you process billing documents collectively.+
    Procedure
    +If invoice dates are defined for the customer, the system proposes
    the billing date from the invoice date calendar. If no invoice dates are
    agreed, then the actual goods issue date is formed on the basis of
    delivery related billing. In order related billing, the billing date of the
    order forms the basis of the billing date.+
    +If you are billing services, the system proposes the date of services
    rendered. You can change the date manually in the sales document.+
    +If you are using a billing plan to bill a project, the system can propose
    billing dates for the billing plan on the basis of planned or actual dates
    in the corresponding milestone.+
    +In a billing plan for a maintenance or rental contract, you can specify rules
    by which the system determines billing dates on the basis of other dates in the contract.+
    Regards,
    Sarthak

  • CATS vs. Sales order cost estimate

    Hi Gurus,
    If I sent some hours to the sales order item thru CATS, can I have them in the sales order cost estimate?
    Thanks
    g

    Thanks.
    So the one way to have CATS hours in sales order cost estimate is somehow squeeze these hours into the sales order BOM, init?
    What is the best way to do? Plan it in the routing and put the actual hours thru CATS into the production order? Or some other way?
    Regards
    g

  • Restrict Manual Entry of Items while creation of sales order

    Hi,
    <b>Requirement:</b>
    User can create a sales order only for line items of contract if sales order is created with reference to contract. Any manual entry of line item should be restricted.
    <b>Analysis:</b>
      I have coded to check the line item is created with ref to contract or not.( VGBEL gets populated if it is created with ref to contract.). I checked in userexits (USEREXIT_SAVE_DOCUMENT_PREPARE) and (USEREXIT_FIELD_MODIFICATION).
      Do help if anyone have come across such scenario.
    Regards
    Sailaja.
    (Intelligroup)

    Hi,
       This functionality may be possible with a Configuration setting in SPRO.
       plz check with your Functional guys.
    regards.

  • Total of particular items of various open sales orders for particular cust

    HI.. following are my Items code  :
    2009,  8010, 8016, 9831, 27363, 27361, 27360, 27181, 16095.
    i want the report that consists of all items to be delivered to the customer. I  have created the following query :
    SELECT T0.CardName AS 'Dept_Name',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '2009') '2009',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '8010') '8010',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '8016') '8016',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '9831') '9831',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27363') '27363',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27361') '27361',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27360') '27360',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27181') '27181',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '16095') '16095'
    FROM ORDR T0
    but i want the total of particular items of various open sales orders for particular customer.
    pls improve the above query.
    thanks
    reema

    Hi,
    Try this
    SELECT T0.CardName AS 'Dept_Name',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '2009') '2009',
    (Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '2009') 'All 2009',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '8010') '8010',
    (Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '8010') 'All 8010',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '8016') '8016',
    (Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '8016') 'All 8016',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '9831') '9831',
    (Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '9831') 'All 9831',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27363') '27363',
    (Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27363') 'All 27363',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27361') '27361',
    (Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27361') 'All 27361',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27360') '27360',
    (Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27360') 'All 27360',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27181') '27181',
    (Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27181') 'All 27181',
    (Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '16095') '16095'
    (Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '16095') 'All 16095'
    FROM ORDR T0
    Regards,
    Bala

  • Change of Sold to Party in Sales order created with Reference to Contract

    Dear Gurus
    I want to change the sold to party in Sales Order created with reference to contract.
    When I create a Sales order with reference to contract the system copies all the partner functions- Sold to, Ship to, Bill to and Payer alongwith other data.
    However Sold to is marked as "Grey" and not changable, rest of the partners can be changed.
    There is no subsiquent document created with reference to this Sales Order.
    Please advice.
    Thanks a lot.
    Regards
    Raghu

    Hi ,
    Please follow the below mentioned step.
    1) Create a partner function letts say Authorized SP .
    2) Assign all the possible authorised  SP (customer) in the contract.
    3) When you create sales order with reff to Contract. Put the customer for whom you wish to create a sales order in release partner tab.
    Hop this will resolve our problem
    Regards,
    Krishna O

  • Copy item from Quotation to sales Order

    Hello,
    How can I copy all the line items from quotation to sales order including the price, Quantity & the Sales Texts?
    Thanks
    AK

    Hi
    Maintain copy control from sales document to sales document using t-code VTAA. Select your target & source sales document type from the list & double click on the same. There you can define the copy control.
    For Text control you can use the T Code VOTXN & create your own text controls.
    I hope this will be helpful.
    Thanks & Regards,
    Bidhu

  • How to hide the Condition types in item condition screen in Sales Order ?

    Hi Experts,
    We got new requirement from the Client. Pricing Condition types  are ZZBG, ZPBG, ZPBA, ZFSG, ZBDG and ZBHG part in Pricing Procedure. These condition types have Condition records. These need to be hidden in Item conditions screen in Sales Order but other status of the conditions remain unchanged. Pleas provide me the solution earliest  How this we can achieve in a best way.
    Best Regards,
    Srikith

    Hi Srikanth,
    You can achieve this using CONDITION EXCLUSION.
    Maintain Condition exclusion for first condition type its Exclude the condition types which are below to that.
    You must set a condition exclusion indicator for the price. You can do this in two ways:
    If you want to set the condition exclusion indicator a follows then you specify it:
    1..for all condition records of a condition type (e.g. with condition type PR00) when defining a condition type in SD Customizing
    2.for an individual condition record (e.g. only for material 4711) in the detail screen of a condition record (in the Condition exclusion field)
    Hope this will helps you
    Dasaradha

Maybe you are looking for