Change of material name

Dear aspirants.
Pl tell me teh way to Change the material name ( code ).
thank u

Hi,
The material code is the Master data, You can't change the same once it is created.
As all suggested you can apply deletion flag to the material in MM06 and if you want to remove from the data base then archeive the same from Tx: SARA.
Then you can go-ahead and create the new material as per your requirement.
Thanks
Eshwar H

Similar Messages

  • BADI name during SAVE after creating or changing a material in MM01and MM02

    Hi gurus,
    Please refer me BADI name during SAVE after creating or changing a material in MM01and MM02.
    Whenever a user changes or creates a meterial ,I want the BADI name at that point.Exit name or Enhancement point will also suffice.Please help..

    Hi,
    Enhancement: MGA00001
    Function module Exit : EXIT_SAPLMGMU_001 Enhancements for Material Master Tables
    BADI_MATERIAL_CHECK  Enhanced Checks for Material Master Tables
    BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data

  • Changing existing Material Group  user defined names  to new mat groups

    Hi Gurus,
    My client is using conventional Material Groups user defined names for ages in their system.
    Now they have requested us to workout for switching over to UNSPSC material groups Global Standardization.
    While carrying out the exerice, they have asked us to completely clean up the entire system to replace the new material group with old in all Masterdata, transaction data including statistics table in pr, po, stock and in everything
    If any one of you have carried out this exercise and if you have any useful documentation, please inform me
    Thanks and Best Regards,
    Mohan

    Hi,
    If you change the Material groups in Material master the system the system will not update the PR/PO/Stock or others.
    You need to change all the documents to update the New Material groups.
    For Material master update you can use the LSMW.
    You can update the PR/PO also but if the PR/PO is subjected to Release Strategy then you need to derelease then change the material group then update and if it is based on the Material group then while update the new release strategy will apply and you have to change everything.
    Think of that if you have huge data then it is very difficult to change all the documents. if the data is Less you can proceed .
    Instead of deleting old material groups just add the new material groups and use them in future for all your process.
    rgds
    Chidanand

  • Change in Material Description in Sales Order

    HI,
    We have a scenario where there's a change in our existing material Description and there's an existing SO of the said material. When we changed the description in MM03, it doesn't reflected/changed in VA03. The material description there, remains the same. Is there any other option where we can apply this changes, without even redoing the SO in VA01?
    For Example : Material 1000 with Description - Juana House Model 1 ; While the correct description should be Juana Basic House Model.
    Please suggest if there's any other options available. Thanks

    Hi,
    In VA02 you can change the material description (As per SAP Standard). If you are unable to modify material description, please check with ABAP consultant in below prog/user exit:
    Program Name: MV45AFZZ,
    User Exit - userexit_field_modification
    Please take help ABAP consultant for the same.
    Regards,
    Shatrughan Singh

  • Mass changing of folder names in CRM under tcode COMMPR01

    Hi Experts,
    Good day!
    I would like to ask help regarding mass changing of folder names in CRM in tcode 'COMMPR01' under documents tab. I tried to change the folder name of one material but it only updates the folder name for that specific material and not for the whole CRM box. Is there a way for me to do a mass change of name for the folders in CRM? Can this be done in customizing(SPRO)?
    Thank you,
    Christian del Rosario

    Hi Christian,
    Welcome you post on the forum.
    However, here is not for question of your CRM module. It is the forum for SAP Business One E-Commerce and Web CRM. If you are not using B1, close your thread.
    Thanks,
    Gordon

  • COPA report (material name)

    Dear Friends,
    We have maintained in MM master material name as "ABCDEF" under FG.
    but when i pull out report for this material using KE30 report - the material name only refelcts - "ABCD" why does not the complete name reflect in KE30 as well.
    i even changed the Settings of characteristic display - to enlarge the field of the material name but it still shows the material name in trunkated format.
    Please can you assist
    Thansk
    Sanjay

    Hi,
    generally, characteristics are limited to 18 digits maximum field length.
    Check KE24 if the material "name" (is it material number or material description?) is displayed properly or not.
    If it is, the KE30 report causes the problem.
    If it is not, check the characteristics definition / field length in KEA5 of the characteristic that contains the name.
    Best regards, Christian

  • Why do I receive the exclamation point when I just change the album name? File goes missing?

    I keep all of my itunes media on an attached network hard drive.  Had no problems for months but over the past 45 days I've noticed that material has started to go missing that I know I did not delete.  I have found no malware on my system.
    I read a script to tell me all the files that had an exclamation point.  There were some TV shows (an entire season gone missing) and some CDs.
    I just did a test and imported a CD.  I then clicked "get info" and changed the name of the album.  Immediately I received the exclamation point and when I tried to find the original file it is gone.  I have no idea where the file has gone to.  I've tried searching, looking around to find it, and I can't. 
    Why is itunes having this behavior?  How is the file being deleted?  Any other thoughts or ideas of what I should do to stop this?
    I've also sent a support request to the hard drive mfg (lacie) but I'm not sure I'll get much help there.
    Thanks.

    More info:  I just ran the same test two ways.  One, I had some files on my desktop, run a script to move these files to the "automatically add to itunes" folder, the files move just fine to my external hard drive and to itunes.  The file plays just fine and the "get info" tab shows it is playing the file from the external hard drive where the file was moved to (not copied).  But, as soon as I change the artist name or the album, the file goes missing and I get the exclamation point.
    I ran the same test by putting the files on my desktop, but instead of moving the file to the "automatically add to itunes folder" I just double clicked the file to play it.  I let itunes add a copy and organize my folders.  This time, the file would have been copied (not physically moved) and I see itunes is playing the new copied version.  This time, when I try to change the artist name or album, I have no problems.
    I've never encountered this before.  Any info?  Thanks.

  • How to append an alphabet to material name based on characteristic selectin

    Hi every one,
    i have a BOM with material name 'abc' and it has characteristics and class assigned to it. when i select a particular characteristic in the sales order it should append a letter to the existing name of the material. so that the selection differentiates wht characteristic is selected.
    Its like material name should change based on the characteristics.
    one more simple ex:
    material name - 'bike'
    bike with color green -
    'bike-gr'
    green bike with 120 cc -
    'bike-gr-120cc'
    how to approach this ????
    rewards for sure
    thanks
    mmn
    Message was edited by:
    mmn...!!

    Mmn,
    The fucntion module exit EXIT_SAPFV45S_002 is triggered at sales order save. When you perform the configuration and save these values should be available to you. Check with your Abaper how this is to be coded. I could see the field ARKTX (sales order item text) in the export parameters E_VCSDPOS and E_VBAP which means this could be changed. Now how exactly you get the info from characteristics you need to check with abaper.
    Regards
    Ram

  • We have an itunes account on our desktop and my kids have it on their ipod and iphone. I went in and changed our user name from my old e-mail address which is no longer accessible to my new one and now either of my kids can access the itunes store..

    We have an itunes account on our desktop and both my kids have it on iphone and ipod. I went in and changed out user name from an old e-mail address which is no longer accessible to my one I use now... When the kids try to sign onto the itunes store it tells them they have the wrong user name..
    Can this be fixed??

    Did you change the email address or create a new Apple ID?
    If the email address associated with the account was merely changed, sign out of the Apple ID on the devices and sign in using the new credentials.

  • Change Individual Material - What are the required parameters?

    All,
    I've just started using ES Workplace to test out some of the packaged SAP services.  I've been able to successfully use the "Find Material Basic Data by Elements" service to search for materials.  But now I'm having trouble with the "Change Individual Material" service and getting it to do anything.  Specifically, I can invoke the service from WS Navigator and it says that it executed successfully but the fields that I was attempting to chagne are not changed on the material. 
    So, I have two questions:
    1.) Where is the documentation for each service which defines which fields are reqruied for the service method to execute successfully?  I don't see it anywhere.
    2.) For this service in particular, what fields are required for the service to execute?  Say, for example, that I want to change the volume of a material.  Which fields need to be populated?

    I can see some sample test data is also given there, please see link posted in previous post (but for ERP).
    Regarding your question about so many fields required to update certain data then please remember these services are created to be very generic so you pass lot of data which you may not want to update but only change field which you want to update and it should work.
    Same service you can use to update different attributes of Individual Material.
    One more thing, you are reading data using material service and trying to update individual material, is it correct? i thought they are two different thing.
    Regards,
    Gourav

  • How can I change my user name? Someone else is using "phammm" my user name. At this point I cannot sign in with my email address and change my name. Help!

    When I try to access the user forum, I have this problem. I am trying to access the forum for a problem with Firefox. NOte the typo; my user name is phamm.

    hey...thanks for your post....ok I followed your instructions but seems this is what i had already done...
    so say when I turn my computer on
    I get
    MAC OS X
    Louise xOldsurnamex
    Login user: Louise xnewsurnamex
    Password-----------
    So I have already changed the login name and it is the only one showing in accounts (and is admin)
    What i want to change is the name above...I am unsure how to describe it? Basically the name of my computer???
    Errr is this poss? Do you know what i am describing?
    Thanx Louise

  • How do I change my user name in syn? I typed in the wrong email address. And I cancelled syn thinking this may work but no luck.

    How do I change my user name in syn? I typed in the wrong email address. And I cancelled syn thinking this may work but no luck.

    You have to clear saved password for this page:
    # Open you login page (where you have to enter username and password).
    # Right click on page and select '''Page Info''' form context menu.
    # On last tab ('''Security''') there is '''View saved passwords''' button, click it and delete all saved passwords for this page.
    # Also clear all related cookies (just in case) there is button for this next to first one.

  • Unable to change group text name or add person to some group texts in iOS 8

    I really like the ability to change group text names as it helps me separate work group texts from personal especially when I have coworkers that have separate business phones. I'm unable to change the name of some group texts as the option is not there when I go into details. I'm also unable to add contact to the same group texts that I'm unable to change the name on. Is this a glitch or am I missing something?

    Hi CaliWingsFan,
    If you are having issues with renaming and adding users to group texts, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    iOS: Force an app to close
    Next, I would try restarting the iPhone -
    Turn your iOS device off and on (restart) and reset
    If the issue is still present, you may want to restore the iPhone as a new device -
    iOS: How to back up your data and set up your device as a new device
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • How can I change the account name in iCloud.  My email has changed and I want to change it on iCloud.

    How can I change the account name in iCloud.  My email has changed and I want to change it on iCloud.

    To change your iCloud ID, go to Settings>iCloud, tap Delete Account, then sign back in with the new ID.  This deletes the account and your iCloud data from your device, but not from iCloud.  Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.
    To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account.  To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll.
    To change the ID on your Mac, go to System Preferences>iCloud, sign out, choose Delete for all the prompts (your data will still be in iCloud), then sign back in with the changed ID.

  • How can I change the "Full Name" for my iCloud account?

    Hello,
    At some point in the past, iCloud started identifying me as someone else when I send emails. This incorrect name appears to be the "Full Name" setting of the email account, but when modifying the properties for the email account in Mail the field for modifying the "Full Name" setting is disabled, not allowing me to make any changes.
    Where is the correct place to change the "Full Name" setting for my iCloud account?
    Thanks,
    - Josh
    <Email Edited By Host>

    I believe it can be changed by going to https://appleid.apple.com/, click Manage your Apple ID, sign in with your iCloud ID, select "Name, ID and Email Addresses", then click "Edit" next to the name listed under "Your Name" and change it as desired.
    Also, if you are trying to change the sender name for your iCloud email account, you'll want to go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done.  Then quit Mail (Command-Q) on your Mac and re-open it.  Your new From name should now appear in the drop-down list when you compose a new email.
    (The image was removed in your post above because it showed your iCloud email address.)

Maybe you are looking for

  • After editing in Photoshop, unable to save

    I'm on a Mac, using LR 3.2 and Photoshop CS4. My image files are on a network drive. Catalog of course is local (since we can't work with networked catalogs). If I right-click a PSD (not raw file) in Lighroom and "Edit in Photoshop", then edit, when

  • TEXT-DRIVEN WORKFLOW FOR NEWSPAPER

    We're a small community newspaper thinking about switching to InCopy (currently using NewsEdit) All reporters, photographers, designers work in the same office. Most stories are written before the pages are layed out based on the amount of advertisin

  • How to draw line art on a panel?

    I've spent a bit of time trying to figure out where to start, and come up with nothing, so..... ..... In CS6 I'm looking to put the equivalent of a C# picturebox onto a plugin panel to act as a thumbnail of sorts.  Within the picturebox the plugin wo

  • Output display

    Hi Friends, I have one query regarding my output. Suppose i have multiple entries in my internal table itab. Now i wanted to display internal table via screen 0101 as a scrollable output. will u tell me how to do this?? If coding is there it will be

  • Converting all to upper case

    Hi, Am loading from a flat file. I need to convert all the data into upper case before loading. Can some one help me out with this. Where and how? Thanks.