Change of maximum number of hit in a report

Hi Guys,
Can any one help me to solve the following:
In KSB1 reprot the maximum number of hit by default is 5000.
It appear in KSB1 --> More Setting ---> Maximum Number of Hit
where can we set the default maximum number of hit so that every time I don't need to change it.
Thanks in advance.
Regards,
sp sahu

Hi ,
go to SE16 , enter table name RSEUMOD, enter ,
select "TBMAXSEL" and execute, u will get a list of all users , against a username , there will be a field TBMAXSEL, click on the pencil icon on top of table, inside the table against the field TBMAXSEL , enter the desired number of hits and save
Regards
Mangesh
Reward points if it helps

Similar Messages

Maximum number of hits when searching in PA20

Hi,
when in PA20, I perform a search based on (for example) last name and I only enter a * as search criteria (in other words I perform a search on all employees), in our development system the maximum number of hits displayed is 5000.
In our testsystem the maximum number of hits is not maximized.
Does anyone know whether this is a general setting? If yes, which setting is this?
If this is not a general settings, how is determined whether the hit list is maximied to a certain number of hits or not.....
Wilfred.

Hi
You can change the Maximum No.Of Hits in the below manner.
Go to your desired transaction .Here PA20 there select the menu Help where u can see in the screen top.
From Help,select the last sub menu i.e Settings.
You will get Tabstrips with 3 tabs.select the tab F4 Help.
There u can find the option to change the "Maximum Number of Hits to be displayed"
Regards,
Sree

How to change the maximum number of process per user in BW ?

Hi,
Do you know how to change the maximum number of process allowed per user ?
With RSRT we can customize the number of process per query but I don't know where we can customize the maximum number of process per user.
In fact, my production environment reach always the max number of process available in SM50...
Thanks a lot

Hi,
A user is not have the No. of processor but a work process can handle N No. of users. If a user hit any transaction v acn say from a list of N worl proceesor which has been taken the work.
Correct if I am wrong.
Regards
Syed.

I can't change the maximum number of calls and busy in 8941

Hi Experts,
I have 8941 model with Camera and I can't make a second call, I tried to change the maximum number of calls, but I couldn't change it's 3 just by default,
Is there any way to solve this issue?
Thanks
Mohammad Saeed

Hi Mohammad,
A firmware or cucm upgrade is required as per the following
https://supportforums.cisco.com/document/97916/sccp89459-2-2qedinstallpdf
HTH
Manish

Maximum number of hits in Document overview (ME21N/ME22N/ME23N)

This number is defaulted to 5000. The help text states that it is the maximum number of hits that are to be displayed.
In my opinion this relates to the result.
In reality I notice that it relates to the first selection in the database.
For example.
All purchase order for a given vendor (+9000 PO-items in the database, 110 without history).
Selection of PO's without goods receipts.
Using the the default value of 5000, the program gives the message "No suitable documents found"
After clearing the max. number of hits, the correct selection is made.
Suppose I would like to see the 10 oldest open PO's, this would not be possible.
Is my assumption correct ?

Hi,
I think there´s something not working correctly in your search, as the 5000 refers to the maximum number of hits that will be shown. I would recommend to open a ticket at SAP.
Best Regards,
Arminda Jack

F4IF_INT_TABLE_VALUE_REQUEST with Maximum Number of Hits.

Hi, all,
Currently i'm doing a customized F4 help for a selection-option filed on a report by using the function module 'F4IF_INT_TABLE_VALUE_REQUEST'. When i execute my report and go to the selection-option filed just now i created and press F4, i can see a list of data in my search help. However when i go to the tab 'Restrictions', i can't see the 'Maximum No. of Hits' option.
So anyone have any idea about this? or how to make the 'Maximum No. of Hits' box come out in my F4 help?
Thanks in advance.

My full code :-
TABLES : BSIK , DDSHF4CTRL .
DATA: BEGIN OF T_ZUONR OCCURS 0,
       ZUONR TYPE BSIK-ZUONR,
      END OF T_ZUONR.
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS   : ASGN_CK FOR BSIK-ZUONR.
SELECTION-SCREEN : END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ASGN_CK-LOW.
SELECT ZUONR FROM BSIK INTO TABLE T_ZUONR.
SORT T_ZUONR BY ZUONR.
DELETE ADJACENT DUPLICATES FROM T_ZUONR.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD         = 'DYNR'
      DYNPPROG         = SY-REPID
      DYNPNR           = SY-DYNNR
      VALUE_ORG        = 'S'
      CALLBACK_PROGRAM = SY-REPID
      CALLBACK_FORM    = 'F4CALLBACK'
    TABLES
      VALUE_TAB        = T_ZUONR.
     RETURN_TAB       = T_ZUONR.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ASGN_CK-HIGH.
SELECT ZUONR FROM BSIK INTO TABLE T_ZUONR.
SORT T_ZUONR BY ZUONR.
DELETE ADJACENT DUPLICATES FROM T_ZUONR.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD         = 'DYNR'
      DYNPPROG         = SY-REPID
      DYNPNR           = SY-DYNNR
      VALUE_ORG        = 'S'
      CALLBACK_PROGRAM = SY-REPID
      CALLBACK_FORM    = 'F4CALLBACK'
    TABLES
      VALUE_TAB        = T_ZUONR.
     RETURN_TAB       = T_ZUONR.
PERFORM F4CALLBACK.
*&      Form F4CALLBACK
      text
--> p1        text
<-- p2        text
FORM F4CALLBACK.
*TABLES   RECORD_TAB STRUCTURE SEAHLPRES
*CHANGING SHLP        TYPE SHLP_DESCR
        CALLCONTROL LIKE DDSHF4CTRL.
DATA : SHLP        TYPE SHLP_DESCR,
          CALLCONTROL LIKE DDSHF4CTRL.
SHLP-INTDESCR-DIALOGTYPE = 'C'.             " Dialog type ( Dialog with value restriction )
CALLCONTROL-NO_MAXDISP   = '500'.           " For getting Maximum no of hits tab
ENDFORM.                    " F4CALLBACK
*But it is not working, Please help. There is some problem with the Perform F4CALLBACK Module. Please help.

Why i'm getting a warning 1021 even after changing The maximum number of connections per source (Unlimited) ?

The maximum number of connections per source (Unlimited) for this connector has been reached by this source IP address.

Hi Arun,
In order to figure out the source of the problematic IP, we need to collect the following logs:
Detail messages of the Error 1021 including the blocked IP address.
Protocol log. We can search the specific IP address in the log to find more information about the sender. Here is the reference of
Using the EAC to configure protocol logging.
Besides, use the command below to verify if they are set as expected:
Get-ReceiveConnector -Identity "this connector name" | select Message*,MaxInbound*
Regards,
Rebecca

Maximum number of columns in a report.

Dear All,
Can anyone tell me the maximum number of colomns that can be shown in a report.
i.e. the maximum number of info-objects that can be used in a query.
Regards,
Aravind.

Hi Arvind,
You are correct in saying that only 50 columns can be shown in the BW report at a time. It will allow you to place more than 50 fields in the query definition but the query will not execute.
If you want to show more than 50 columns, you can add those extra columns in the FREE CHARACTERISTICS of the query definition. So at the time of execution of the query user will see the 50 columns by default and if he wants to see those additional columns, he can replace the already existing columns by the fields in the free characteristics. This can be achieved by DRILL DOWN and DRILL ACROSS.
This is the way to go about it. We also did the same thing in our case.
Regards,
Yogesh

Maximum number of column in the report

Hi all,
We have a Requirement that we need to display 150 column in the output of the report.
Could any one tell me maximum how many we can display in the output.
Thanks in advance

Hi,
We are displying year in the report and this year is coming from date,
but in display year is displaying as 1,994 instead 1994.
Pls help me in resolving this.
Thanks,
Sari

Change maximum no of hit in report

Hi Guys,
Can any one help me to solve the following:
In KSB1 reprot the maximum number of hit by default is 5000.
It appear in KSB1 --> More Setting ---> Maximum Number of Hit
where can we set the default maximum number of hit so that every time I don't need to change it.
Thanks in advance.
Regards,
sp sahu

this table RSEUMO stores that value
fieldname is TBMAXSEL , if there is maintenance for that table u can set it

Changing Maximum Number of Rows Per Page to Include

I am trying to change the "Maximum Number of Rows Per Page to Include" using Enterprise Manager > Coreapplication > Capacity Management > Performance.
It was default to 75. I need to change it to around 5,000. I have a report which generates 5,000 records and I use Agent to send it to our user at a scheduled time.
I change 75 to 5000, activate the changes and restart the BI. After restarting it automatically reverts back to 75.
Has anyone experienced this?
My instanceconfig has contains this:
<Views>
<Pivot>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>5000000</DefaultRowsDisplayedInDownload>

<DisableAutoPreview>false</DisableAutoPreview>
<MaxCells>1920000</MaxCells>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>1000000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Pivot>
<Table>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>5000000</DefaultRowsDisplayedInDownload>
<MaxCells>1920000</MaxCells>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>1000000</MaxVisibleRows>
<MaxVisibleSections>2000000</MaxVisibleSections>
</Table>
</Views>
Any help would be greatly appreciated.
Thanks!

Hi,
Editing in EM should change the settings. Stop all the services and restart
In the individual reports for tables and pivot tables >> Edit the table properties and add the number of 'Rows Per Page'
Hope this helped/ answered
Regards
MuRam

Maximum number of filter values in BEx web

Hi
Is it possible to change the maximum number of filter values displayed when running a query?
Example: When the user runs a query and has to put in a material number, he pushes the button which shows him the possible values for input. The number of values displayed per page is 14 and the maximum number of pages is 72. The maximum number of values is 1000. If the user tries to search, he only searches amongst the 1000 possible values. Is it possible to change the number of possible values shown to unlimited?
We use NW04s BI SP09.
Kind regards
Erik

Hi Experts
I have the same problem , the maximum number of hits si set to 200 , ant the variable contains over 300 values , it is a variable based on a time charactersitic , and the values appear in ascending order , i mean the first 01.1900 , and the last value 03.2012 . i wonder if there is a way to change the order of sort to descending order . I mean the first value 03.2012 and the last one 01.1900 . I attach the image .
Thanks for your help.

Search help: default value for 'Maximum no of hits'

Hello,
I have a request from a user to change the default value for maximum number of hits in the search help.
Any quick hint?
Regards,
Michal

Not sure if this is possible and don't have a SAP system available at the moment ...
But check this out...
Is there anything in user profile ..
or check if the number of hits field has a PARAMETER ID associated with it...
Then in that case you might default a value other than 500 in your user profile.
Cheers,
Ram

F4IF_INT_TABLE_VALUE_REQUEST- how to add Maximum No. of hits

Hi Experts,
I am using F4IF_INT_TABLE_VALUE_REQUEST. Can someone please help me. I am getting 2,100 hits I need to limit it to 500 hits. There is no Maximum number of hits when you click the Downward pointing arrow above the toolbar. How can I add the field for maximum number of hits just like in the standard F4 help function.
Thanks!

Dispay the source code of this function module in Se37.. you will notice that the following is commented out..
CALLCONTROL-MAXRECORDS = 500.
deleteing lines in your program is probably the only option..
ie
data w_lines type i.
w_lines = lines( itab ).
delete itab from 201 to w_lines.
~Suresh

CallManager 7.02 Maximum Number of Registered Devices

We are currently running CallManager version 7.02 with the following configurations:
One Publisher and two Subscribers
CM Groups - 2
Sub1-CMG (used by 9000 devices)
    Sub1
    Sub2
    Pub
Sub2-CMG (used by 4475 devices)
    Sub2
    Sub1
    Pub
Maximum Number of Registered Devices - 10000
1) We just added some more devices that changed to number of devices to:
Sub1-CMG (used by 10050 devices)
Sub2-CMG (used by 4475 devices)
So, some of the new devices did not get registered with CallManager.
2) We changed the Maximum Number of Registered Devices to 12000
When we checked the new devices, there were still some that were not registered.
3) If we move the new devices to Sub2-CMG they register with CallManager.
Any thoughts here?

Since you are on CUCM 7, this means your cluster is running on MCS servers, from memory I think the top level MCS server in CUCM appliance mode supported upto 7500 phones per server. So you may be running into a hardware limit. Although you can configure I guess upto 15000 phones in the CUCM service parameter but still the MCS appliance mode had the 7500 phone/server limit with a max of 30,000 phones per cluster.
So either you have a MCS 7845 I2 or H2 the limit is 7500 per server (I am guessing you have top model of the MCS from number of phones you have otherwise limit will be further lower):
http://www.cisco.com/c/en/us/products/collateral/unified-communications/7800-series-media-convergence-servers/product_data_sheet0900aecd80572724.html
-Terry
Please rate all helpful posts and mark the thread as answered if you have no other queries

Change of maximum number of hit in a report

Similar Messages

Maybe you are looking for