Change of modes not detected

I have a yoga 2 13.My laptop does not detect any change of modes i.e it does not activate tent/theatre/tablet.Is there any solution for it or is it a manufacture defect since i was facing the problem from the beginning.Please suggest.  

Try pressing the rotation lock buttons. 
Also, install my yoga patch. If it detects slate/laptop mode, it is a software problem, not a hardware problem.
indest wrote:
RC8: http://alltechtalk.net/Yoga_Patch.exe
Just an FYI, this is a RC, not the final product.
As always, use at your own risk.
Please report any/all bugs
Change log:
RC8.1 Fixed the notification bug, when the screen was resized; ALT + L hotkey activates the Lock.
RC8: Fixed Lock Password bug, Fixed Lock Siren Bug, Auto max audio upon Lock start, Blocked Muting/Volume down on trigger) when Lock is activated; Added BT Toggle Hotkey Alt+B (thank miru)
RC7: Added "Yoga Lock" to the program (via tray menu).*****
RC6:  Removed Battery info to eliminate redundancy with windows app; Refined System Up-time code; Added Estimate Usage Cost (Eco-Friendly initiative)
RC5: Added Power Plan changer to the trey menu; Added Battery Info, Bug Fixes
RC4: Update detector/downloader; Fixed "Disable Touchscreen on Boot" bug, cleaned up the Settings app; added quick resolution buttons to the tray menu.
RC3: Added a Disable Touchscreen on Boot option; Fixed spelling errors.
RC2: Hopefully fixed the Slate Mode Notification Bug; Auto-Disable Touchscreen, if Touchscreen was disabled before slate mode
RC1: Notification bug fix; changed the path of the trigger file to AppData; made an installer
V. 0.5.1 Added DPI support
V. 0.5: Added a "Close" button disabler (the button next to the volume up button.... this addition prevents accidental program closer); Modified the settings apps; Improved Notification Bar; Removed Tooltips (replaced with Notification Bar) 
V. 0.4: Added Notification handler for Slate Mode/Laptop Mode; Modified the settings apps; Added tray menu; Removed the Alt + X close hotkey, since try menu was added; Fixed minor bugs
V. 0.3: Added Power Plan Toggle on Power State change; Added a Settings App; Added switches to the Patch
V. 0.2: Added Trackpad Fix****
V. 0.1: Touchscreen Toggle
****The trackpad fix only works with generic synaptic drivers. To install the latest driver (17.0.19), please do the following:
1. Disable signature enforcement: https://www.youtube.com/watch?v=NM1MN8QZhnk
2. Install the synaptic driver: 17.0.19
3. Install the aforementioned patch
Yoga Lock Description:
Ever wanted to go to the bathroom at Starbuck or in the Library? Afraid to leave your laptop behind? If so, this Lock was made for you.
Disclaimer: I shall not be held liable for any stolen property!!! As always use at your own risk and please use your brain!
Once activated the lock has the following potential:
Covers your entire screen.
Blocks perpetrators from accessing your desktop.
Prevents USB drives from being stolen, via Siren Deterrent.
Helps deter thieves from taking your laptop.
What can trigger the Lock:
The slightest mouse movement.
Removal of a USB drive.
Attempted power down of the computer (future goal is to suspend all attempts of powering down).
Change in AC status (i.e. unplugging the computer).
When triggered, the lock has the following potential:
Take a picture of the person who triggered the lock and email the picture to you (passwords are encrypted).
Loud siren is played.
Activation of any script you write. This essentially opens this feature to endless possibilities. Currently, I utilize this feature to report my computer as stolen to the prey-project's control panel (this script is not fully functional and will not be packaged with this application).

Similar Messages

  • HT201263 recovery mode not detected

    I'm trying to restore my ipod since it's passcode locked. But itunes is not detecting it after pressing home button and connecting it with the usb. What should I do??

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • IPhone 3g stuck in restore mode, not detected by computer

    while i was restoring my iphone, my computer died. and im stuck with this.(see picture) it can't be hard reset and be detected by my computer. please help me!!

    Hello there MKkhann,
    I would recommend resetting your iPhone. This will not take it out of recovery mode, but should 'unstick' it. It may take more than 1 attempt to be successful:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
              http://support.apple.com/kb/ht1430
    All the very best,
    Sterling

  • Monitor says VIDEO MODE NOT SUPPORTED after changing display settings

    HELP! I am about to have a nervous breakdown with my mac mini! I hooked up the mac to my Philips LCD via DVI. No problem at all. But because the screen is only 15" I wanted to play around with the display settings a bit. So I changed the resolution from it's original 1204x768 to the one higher (not sure of numbers) and to my HORROR, I now can't get any picture at all - it says "VIDEO MODE NOT SUPPORTED". I have tried everything I can think of. I have rest the P-RAM, I have unplugged all cables, plugged the back in again, I bought the mac into work and hooked it up to my monitor and changed the resolution back to 1024x768 which is what it was on originally and that STILL didn't work. I can see the Apple logo and then it goes black and comes up with the error message. HELP! What am I doing wrong - I can't believe one click of a mouse button has rendered my display useless!!!

    Welcome to Apple Discussions!
    Try booting the mini without the display connected, and then, once the system is running, connect the display. This will often force the system to default to a low resolution, and then correctly detect the display when it is connected.
    If that doesn't help, with the display connected, boot into safe mode (hold the shift key down when starting up) and once the system is running, change the resolution to 1024x768, and ensure the correct refresh rate is selected. Rebooting normally ought then to give you a good display.
    If all else fails, boot into safe mode with the display connected, and then in the Finder's file menu, use the 'find' option to search for 'windowserver' (no quotes). You should get 2 or 3 results, including one with a string of alphanumeric characters. Move all of them to the trash and restart normally.

  • GT60-0NC SSD not detect in AHCI mode using sata3 port

    GT60-0NC not detect my SSD in sata3 port using AHCI mode. 
    Using Kingston SSDnow V 300 120Gb
    Test ok when setting to IDE mode or RAID mode.
    Anyone know to resolve this problem.

    resolved after changing to Plextor M5S SSD

  • IPad (2)  Recovery Mode, not getting detected by ITunes on the PC

    While upgrading my IPad (2) to IOS5, it has gone into Recovery Mode. NOt it does not get detected by ITunes on the PC - doesn't appear on the sidebar. I've completely uninstalled all itunes and other Apple components and reinstalled Itunes on PC - no change. IPad is still in starting screen mode and not detected by PC. Please help.

    See if this page helps : http://support.apple.com/kb/HT4097

  • Fire X2250 / Hard disks not detected in AHCI mode

    we have two Sun Fire X2250 servers. one i have completely setup already with an OS, using AHCI mode for the hard disks in the BIOS.
    on the second server, i setup the disks the same way using AHCI. the system booted and detected all of the disks, and i installed an OS. now, after rebooting, the disks are not detected; the BIOS is stuck on 'detecting SATA channel 0'. if i remove the drive on SATA0, then the BIOS gets stuck on 'detecting SATA channel 1'. the BIOS isn't frozen, because i have left it waiting for several minutes, then pushed F2 and i saw it changed to "Entering setup..." i can never get to setup, though, because the disks are never detected. if i unplug both HDD's, then i can get into BIOS setup. i have tried loading failsafe as well as optimal defaults. this resets it back to IDE mode, and the disks are detected fine but, as soon as i change to AHCI mode, the BIOS can't detect the disks. again, the other X2250 is working just fine with AHCI. these servers are practically brand-new (have been sitting in storage for some time) and this is the first time they have been configured.
    i also tried removing power from the server for at least 2 minutes, and i also took out the battery for well over 30+ seconds. the strange thing is, that doesn't seem to have cleared the CMOS because, as soon as the BIOS comes up, it is still stuck 'detecting SATA channel 0' whereas i would have expected it to be reset to IDE mode and detect the disk.
    what's happened?

    i was finally able to clear the CMOS by powering up the system with the battery removed. disks are detected fine but, as soon as i change to AHCI mode (leaving everything else as it is), the BIOS still freezes at "Auto-detecting SATA PORT 0".
    i compared the BIOS settings with the working X2250 and copied them over exactly, but still the issue remains. is some piece of hardware failing?

  • Ipad 2 not detected in recovery mode on my ASUS Windows 7 laptop

    I have had this issue on all my idevices since I got this laptop, so this isn't directly associated with the new update.
    I can sync my idevices with itunes on my laptop without any issues, but every time I try to install an iOS update, when it get to the stage where it is "preparing to restore your device" or some such, the laptop installs a new device driver and then itunes just spins awhile until it finally spits out error 1601 and then the device is stuck on the screen where it prompts you to connect to itunes.
    At this point itunes on my laptop will not detect the device.  I can see it listed in my device manager and it claims the usb driver is working correctly, however it no longer makes the beeping sound when I plug or unplug the cable, though it does disappear and reappear in device manager, which indicates it recognizes ipad plugged in, but not in the same way.
    I have tried all the advice on the apple website re: unintalling reinstalling itunes an all it's components, disabling antivrus, firewall and non essential services, removing usb devices etc to no avail.
    If I take my device over to my parents 32 bit vista desktop it recognizes it, installs the driver and itunes recognizes an ipad in recovery mode and I was able to restore the software and update to the new iOS on that desktop, then had to bring it back to my laptop to restore the software from my last backup.
    My first question is....when the new ios is being installed is it putting the device into recovery mode as part of the process or is it going into recovery mode because the process errors out?  If it's the former, then my assumption is that the whole issue is that for some reason something on my laptop is stopping itunes from being able to recognize my ipad while in recovery mode.  If the later, then ?
    My second question is....is the problem the driver, the usb port or something else unique to the laptop?  I tried uninstalling and reinstalling the driver, but if i let winows detect it after uninstalling it can't find a driver and i get the exclamation point.  If i try to manually install per the apple instructions, it tells me that the driver file is not compatiable with my device.  So either windows is somehow installing the wrong driver while device is in recovery or the comp isn't detecting what type of device it is properly or ?
    I'm hoping maybe i can get the next os update over the cloud and this will become a non-issue, but having to go borrow a pc to update this thing gets really old as the laptop is my only computer, so any ideas would be appreciated.
    Laptop is an ASUS ROG - not sure the exact model running 64 bit Windows 7  It has two usb ports and i have the same issue on either one.
    The PC i successfully updated my device on is an older Dell running a 32 bit version of Vista

    Hopefully this will help you.  Try placing your iPad in recovery mode again.  You may have to try this a few times.
    iOS: Unable to update or restore

  • IPod classic connects but is not detected in Diagnostic as "No iPod, iPhone, or iPad found" will not sync no matter what I try. have reinstalled itunes, changed cords, restarted services. Just started happening very recently. diagnostics detection is key.

    I have a 120gb Classic that has been working, connecting and syncing flawlessly for years. Now it appears that (maybe since an itunes update) my same Windows 7 x64 computer that has not changed other than the occasional iTunes update will not detect my iPod, and therefore will not sync any more.
    The odd thing is that iTunes will sometimes see the iPod (not always), and Windows will also sometime see the iPod. Even when it does, and I click to sync a podcast (or anything else) it appears to go through the #1 and #2 steps and says it is syncing - Do not unplug, then appears to finish, but when you check the ipod after ejecting, nothing has changed. It looks like this has been happening for about a week, but my wife must not have realized that songs and other items were not actually syncing.
    I have tried uninstalling iTunes, downloading the 11.2... version available online now, no help. I have tried resetting the ipod, no help. I have tried changing cables, no help. every time I go through the diagnostics in iTunes, it fails the connectivity test and says "No iPod, IPhone, or iPad found.
    I am so frustrated. I have tried everything I can think of but even though iTunes shows the iPod, it wont sync....

    This issue has been resolved - my Support Advisor, Edgar, was able to discern what was causing the problem.
    It appears that, despite years of never experiencing this, one of the latest ipod updates actually altered my device's personal settings and changed it to "Manual" for all synchronizing; even performcing Factory Restores did not change it back to being automatic.
    My ipod is working as good as ever now thanks to Edgar. If anyone else is having this problem, please make sure you check your device's settings in iTunes and see if "Manual" is checked - even if you never changed the settings yourself and have no reason to suspect that to be the problem, as was the case here. If it is checked - uncheck it to enable automatic syncing.
    So relieved this was not a much more serious problem. I've missed having my music on the go. Thanks, Edgar!

  • [win 8] itunes not detecting iphone in DFU mode for restore/recovery

    Here is the story:
    Had my iphone 6 plus for about a month now. Today I hooked it up to my windows 8 machine and itunes (both fully updated to latest versions).
    Phone was detected fine, so I ran a full sync and backup to my local machine with itunes. No problem its all good.
    Then went to the updates section and it said I had a new one (8.1.2 or whatever I cant remember)
    I ran it, in itunes while the device was connected.
    It downloaded and was going through the install process... then the screen on my phone went to the "connecting to itunes" graphic (with the cord and the itunes app icon). Thats where it sat.
    So now it no longer appeared as a device in itunes either.
    OK... went to the forums.
    1) Tried all the reboots and uninstalls/reinstalls
    2) Tried booting and connecting in "Recovery mode" (default now as all I see is that connecting screen)
    3) Tried booting and connecting in DFU mode
    Neither mode was detecting the device with itunes but I am getting the chimes of connection for windows itself.
    I do see the device in my windows system hardware under "unspecified" as "Apple Mobile Device USB Driver" (and when i view details its model shows either Recovery or DFU mode depending on how I booted the device)
    So here I am... stuck with a phone in either DFU mode OR recovery mode on a botched ios update and itunes wont detect it on windows 8.x
    What can I do ?
    Looking for some creative or outside the box ideas here. I just want a reset and restore of the backup I made on local itunes today.
    If I can get the device back to even a factory reset, I am hoping itunes will detect it properly and can run a restore from it local storage.
    Really stuck and been on this for hours now.

    Hello joeldevil,
    I know you have tried uninstalling and a reinstall of iTunes, but have you checked out the additional troubleshooting steps to check the drivers to make sure that they are installed. There is also a section for what to do when your iPhone is in recovery mode and not seen in iTunes. One more thing you can try is to try your restore in another user. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/en-us/TS1538
    Regards,
    -Norm G. 

  • Changed resolution by mistake and have lost everything "mode not supported"

    Guys,
    This one is totally my own fault but ive managed to crash my Apple TV and was wondering if someone may be able to assit me with a solution?
    Apple TV was working fine on my samsung HD TV and i was playing about with the settings.
    I belive i was in "resolution" at the time and the setting was 'auto'.
    For no reason other than my own stupdity, i changed the resolution to 780p or something like that and the screen went immediately blank.
    All i get now is "mode not supported".
    Ive held down + and menu and done the scan and it wont retrueve my previous settings.
    Ive also tried - and menu and still nothing.
    Why didnt i just leave it alone.
    Any ideas folks on how i can get this back working and restore to auto?
    Panicking.....
    Simon.

    Have you tried restarting it.

  • TM - External Disk Drive Not Detected in Recovery Mode

    Hello Apple Lovers,
    I am using the My Passport for Mac 500GB disk drive with time machine on my MacBook Air to create data backups.
    I checked the disk for any corruption using Disk Utility. No issues were found. I find the disk works excellantly in terms of creating backups and restoring them inside time machine.
    I cannot detect my external disk for restoring entire images of the OSx in recovery mode. For some reason, TM will not detect my backup disk in the recovery mode. I use the WD Security software on my disk to lock it, however, never before has the security lock posed any problem to me. I used to see a prompt appear for me to unlock the drive in recovery mode on attempting to access the TM backups.
    Please take your time in replying to my post. I recovered my entire system last week and restored all the data using TM's twlight view. No rush! I successfully created a backup of my fresh OSx Mavericks on the MacBook Air with all the data restored using TM. I only wanted to troubleshoot this issue in case something occurs in the future that may require me to restore data using TM in recovery mode.
    I browsed extensively through many of the discussions covering Time Machine. None mentioned my particular dilemma. Any assistance would be a valuable controbution not only to me, but other Apple users who may purchase My Passport for Mac drives and encounter a similiar problem.

    megaram wrote:
    I use the WD Security software on my disk to lock it, however, never before has the security lock posed any problem to me. I used to see a prompt appear for me to unlock the drive in recovery mode on attempting to access the TM backups.
    You will need to avoid using third party software if you hope to access the disk and data in recovery mode.
    If the WD software encrypts your data recovery mode will need a way to decrypt it. Recovery mode is a 'reduced mode' that only runs Apple software (not third party software) so the WD drivers that decrypt the disk will not be installed & Disk Utility or Migration Assistant will not be able to open the data on the disk.
    There have been long threads that make me steer clear of using ANY Western Digital drive software with 10.9.
    https://discussions.apple.com/thread/5475136?start=0&tstart=0
    https://discussions.apple.com/docs/DOC-6202 <- WD had to remove software from Macs because it ruined peoples data on 10.9.
    There are other threads on WD disk tools causing errors on 10.9, external hard disks do not require the use of additional software on OS X - these apps & drivers are mostly junk that is not a good idea to install.
    If you really want to protect your data with encryption the features are already built in to OS X, it's called Filevault. It will encrypt your internal HD & your Time Machine backups (when the OS is encrypted). It works with Apple tools & doesn't rely on any third party drivers.
    You will need to disable the 'WD security lock' and make sure the disk works without the WD software if you hope to have any chance of reading it in recovery mode.

  • HT1212 I have forgotten my passcode for ipad and itunes is not "detecting a device in recovery mode."

    I have forgotten my passcode for ipad and itunes is asking passcode to be entered - even after following directions for computers not synced... multiple times, but iTunes is not "detecting a device in recovery mode."  What do I do now?

    DFU Restore
    This will very likley result in loss of data.
    Plug the iPhone into the computer.
    Ensure that it is running the latest version of iTunes and that it has access to the internet.
    Press and hold both the home and sleep/wake buttons for exactly eight seconds.
    Release only the sleep/wake button but continue to hold the home button for another five seconds.
    Let go of the home button, then look at the computer screen for an instructional popup.
    The popup should say "iTunes has detected a device in recovery mode. . .(etc)"  Click accept to all boxes and let iTunes download and install all of the latest device Firmware and Software.
    If no popup appears, repeat the above DFU instructions.  If you've never done a DFU, it may take about three attempts to get the timing right.

  • WLS 8.1, SP1 - Weblogic does not detect my servlet class has changed

              I've come across this problem in weblogic 7.0 sp2 and 8.1 sp1 and never found the
              solution. I've asked for solution in BEA's newsgroups and official support and
              NEVER received any suitable answer. I've found other people's quesions regarding
              this problem and they didn't found an answer either. I can't believe this is not
              happenning to more people and there is not solution!!!!!!
              Sometimes (don't know when or why) when we copy our servlets developed with JBuilder
              (6, 7 or 9) or javac and ant, into our exploded archive directory application,
              weblogic does not detect the change, and it serves the the servlet's old version.
              Of course, that servlet is not included in any classpath, and even if we delete
              the class file, it still executes the old version. We even delete the .wlnotdelete
              folder under our server, temp, etc. restart the machine, etc. and it does not
              load the updated servlet.
              The only solution is to change servlet's name and the reference in our web.xml.
              That's the moment that weblogic detects changes, but, for so long? Sooner or later,
              the problem appear again... or not. WHY!!??!! What should we change/delete or
              whatever for our new servlet to be updated?
              How can I force weblogic to register again as new servlets ALL my servlets?
              Now it's even happening to a class used in a very simple tag library. CAN'T BELEIVE
              IT!!!!
              It happens in NT 4.0 and W2K Prof. It happened in Weblogic 7.0 sp2 and now in
              Weblogic 8.1 sp1. It never happened in Weblogic 5.1 sp10.
              Looking forward to hearing a solution for this.
              

              I too am looking for this answer.
              I did notice that the BEA Docs mention that the compiled file needs to be in WEB-INF/classes,
              and mine is in WEB-INF/lib. However, ALL the .jar files are in the LIB directory.
              My jar file is never found when it's in the classes dir....
              Please let me know if you find the solution.
              "Ignacio Sanchez" <[email protected]> wrote:
              >
              >I've come across this problem in weblogic 7.0 sp2 and 8.1 sp1 and never
              >found the
              >solution. I've asked for solution in BEA's newsgroups and official support
              >and
              >NEVER received any suitable answer. I've found other people's quesions
              >regarding
              >this problem and they didn't found an answer either. I can't believe
              >this is not
              >happenning to more people and there is not solution!!!!!!
              >
              >Sometimes (don't know when or why) when we copy our servlets developed
              >with JBuilder
              >(6, 7 or 9) or javac and ant, into our exploded archive directory application,
              >weblogic does not detect the change, and it serves the the servlet's
              >old version.
              >Of course, that servlet is not included in any classpath, and even if
              >we delete
              >the class file, it still executes the old version. We even delete the
              >.wlnotdelete
              >folder under our server, temp, etc. restart the machine, etc. and it
              >does not
              >load the updated servlet.
              >
              >The only solution is to change servlet's name and the reference in our
              >web.xml.
              >That's the moment that weblogic detects changes, but, for so long? Sooner
              >or later,
              >the problem appear again... or not. WHY!!??!! What should we change/delete
              >or
              >whatever for our new servlet to be updated?
              >How can I force weblogic to register again as new servlets ALL my servlets?
              >
              >
              >Now it's even happening to a class used in a very simple tag library.
              >CAN'T BELEIVE
              >IT!!!!
              >
              >It happens in NT 4.0 and W2K Prof. It happened in Weblogic 7.0 sp2 and
              >now in
              >Weblogic 8.1 sp1. It never happened in Weblogic 5.1 sp10.
              >
              >Looking forward to hearing a solution for this.
              

  • I am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

    i am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

    This is for Windows: http://support.apple.com/kb/TS1538

Maybe you are looking for