Change of Movement type for Return delivery of Goods Issue doc in config

Hi SAP Gurus,
I am doing return delivery of goods issue document.then the system automatically pick the movement type
Like Example i am doing return delivery for Goods issue 201,the system should pick 202 but instead of 202 its picking 902 movement type which i defined.
Where exactly i have to change in configuration please let me know....
Thanks,
Sivakumar

In OMJJ, check the reversal movement maintained for the one your facing the issue.
If any further clarification is required, revert.
If helpful award points
Regards,
Vivek

Similar Messages

Movement type for free of charge good issue

Hi,
Does anybody know what is the movement type for free of charge good issue??
I want to know the equivalent movement type of good receipt 511 (delivery w/o charge) but for good issue.
Thanks.

Hi,
Thanls for your reply but this is not what we need.
We want to do a manual good issue without charge and we don't know what is the correct movement type we have to use.
I have tried to use 601 in mb1a transaction but an error has appeared: "Goods movement not possible with mvmt type 601"
I think we need the equivalent movement of good receipt 511 but for good issue.
Thanks!!

Movement type 122 - return delivery

Dear gurus,
I have material type FHMI-PRTS.
During return delivery with movement type 122, system shows following messages.
qty balances are not sufficient in the register
Pl. elaborate in details,
Regrds,
Devendra

Hi,
Check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Incoming Excise Invoices > Specify Which Movement Types Involve Excise Invoices > Here check whether Movement Types are maintained.
Regards,
Manish

Goods Movement Type for Inbound Delivery

Hi all,
up to know I always thought that when posting a GR to an Inbound Delivery this happenes with MVT 101.
In my current project MVT 103 is used; but only if serialized materials are concerned.
Does anybody have an idea where/how I can control this?
Nor in the ser-no.-profil neither in the confirmation key sth relevant is stipulated....
Or coulkd it be that an exit is behind? If so, is there a possibility to find it out?
bR
Thomas

Hey,
many thx; seems to be very "hot".
They use a special IC (ZSN) for serials.
Unfortunately your mentioned link does not work ("Page not found"). Could u pls. check it?
Looked in T184L, clear so far.
What now is "missing:" Where/how is Movement Type determined?
Thx again
Thomas

How movement type 641 E can post goods issue for sales order

Hi
One of our sales process need sales goods cross plant, form sales order type OR(the item required special stock E) to create delivery then auto generate PR , form PR create Stock Transprot Order, in vl10b generate delivery type is NL, when PGI this NL delivery, the message said 'Sales order stock 30001057 000010 does not exist' .
I check the NL delivery movement type is 641 E, normally, 641 would transprot the goods to 'in transfer', but I could not find the reason why it can't create sales order stock in 'in transport' .
Any suggestion about that?

Did you check whether stock is available for the particular material ?
Is the material extended to the relevent plant, storage location ?

Movement types for SD

Can any of u throw some light on the various movement types that are used in SD module.

hi
The movement type is a three-digit key used to differentiate between goods movements in the R/3
System. Examples of these goods movements are goods receipts, goods issues or transfer postings
It plays a central role in Automatic Account determination. Together with other factors Movement types determines which stock or consumption accounts are updated in Financial Accounting.
We will use the Standard Movement types of SAP..
In case as per the Business requirement if you want any new Mvt type..
then you need to COpy the Standard Mvt type in OMJJ
Please find below the list of movement types
Movement type is the movement type + 1 (reversal of 101 = 102).
101 Goods receipt for purchase order or order
If the purchase order or order has not been assigned to an account, a stock type (unrestricted-use stock, stock in quality inspection, blocked stock) can be entered during goods receipt.
If the purchase order or order has been assigned to an account, the goods receipt is not posted to the warehouse, but to consumption.
In the case of non-valuated materials, the goods receipt is posted to the warehouse, although the purchase order has not been assigned to an account.
Possible special stock indicators:
u2022 K Goods receipt for purchase order to consignment stock
u2022 O Goods receipt for purchase order to stock of material provided to vendor
u2022 E GR for purchase order or order to sales order stock
u2022 Q GR for purchase order or order to project stock.
Goods receipt for subcontract order: at goods receipt, the consumption of the components is posted at the same time (see movement type 543)
Goods receipt for stock transport order: at goods receipt the transported quantity is posted in the receiving plant from stock in transit into unrestricted-use stock (stock in quality inspection or blocked stock).
103 Goods receipt for purchase order into GR blocked stock
you cannot receive goods into goods receipt blocked stock for stock transport orders.
Possible special stock indicators:
K, O, E, Q
105 Release from GR blocked stock for purchase order
Movement type 105 has the same effects as 101.
Possible special stock indicators:
K, O, E, Q
121 Subsequent adjustments for subcontracting.
This movement type cannot be entered manually.
With a subsequent adjustment for a subcontract order it is possible to correct the consumption of components. In this case, the material produced by the supplier is credited with the excess consumption / under-consumption. For this reason, if there is a subsequent adjustment, an item is generated for the produced material using movement movement type 121.
Movement type 121 does not have a reversal movement type.
Possible special stock indicators:
O, E, Q
122 Return delivery to supplier or to production
Using movement type 122, you can distinguish real return deliveries for a purchase order or order from cancellations (102).
In the standard version, you must enter a reason for the return delivery if you are using movement type 122. This enables you to carry out evaluations for return deliveries.
The effects of movement type 122 correspond to a cancellation of movement type 101.
Possible special stock indicators:
K, O, E, Q
123 Reversal of return delivery
If you returned a goods receipt using movement type 122, you can reverse the return delivery using movement type 123. This movement type has the same effects as movement type 101.
Possible special stock indicators:
K, O, E, Q
124 Return delivery to vendor from GR blocked stock
Using movement type 124, you can return a goods receipt to GR blocked stock ( 103).
Movement type 124 has the same effects as movement type 104.
Possible special stock indicators:
K, O, E, Q
125 Return delivery from GR blocked stock - reversal
If you returned a goods receipt to GR blocked stock using movement type 124 , you can reverse the return delivery using movement type 125.
Movement type 125 has the same effects as movement type 103.
Possible special stock indicators:
K, O, E, Q
131 Goods receipt for run schedule header
This movement type cannot be entered manually. It is generated automatically at notification of goods receipt for a run schedule header.
Possible special stock indicators:
E, Q
141 Goods receipt for subsequent adjustment for active ingredient
This movement type cannot be entered manually. It is generated automatically upon subsequent adjustment for a proportion/product unit . Subsequent adjustment is necessary if the system finds that there has been excess consumption or under-consumption after a goods receipt posting.
Possible special stock indicators:
K, O, E, Q
161 Return for purchase order
If a purchase order item is marked as a returns item, the returns to vendor are posted using movement type 161 when the goods receipt for purchase order ( 101) is posted.
Movement type 161 has the same effects as movement type 122.
Possible special stock indicators:
K, O, E, Q
201 Goods issue for a cost center
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
u2022 K: Goods withdrawal from consignment stock
u2022 P: Goods withdrawal from the pipeline
If you have withdrawals from consignment stock and from pipeline, payables to suppliers ensue.
221 Goods issue for a project
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
K, Q
231 Goods issue for a customer order (without Shipping)
You use this movement type if you want to process the delivery without Shipping.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
E, K, Q
241 Goods issue for an asset
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
K
251 Goods issue for sales (without customer order)
Use this movement type if you have not entered a customer order in SD. In the standard system, the movement is assigned to a cost center.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
K
261 Goods issue for an order
This refers to all withdrawals for orders (for example, DS:GLOS.3526C388AFAB52B9E10000009B38F974>production orders, maintenance orders), with the exception of customer orders.
Possible special stock indicators:
E, K, P, Q, W
The goods issue can be posted manually in Inventory Management or automatically when an order is confirmed or via a delivery in Shipping.
281 Goods issue for a network
The goods can only be withdrawn from unrestricted-use stock.
The goods issue can also be posted via a delivery in Shipping.
Possible special stock indicators:
E, K, P, Q
291 Goods issue for any arbitrary account assignment
With this movement type, all account assignment fields are ready for input. You can assign the movement to any arbitrary account assignment object.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
E, K, P, Q
301 Transfer posting plant to plant in one step
The quantity is transferred from unrestricted-use stock in the issuing plant to unrestricted-use stock in the receiving plant.
Possible special stock indicators:
E, O, Q, V, W
303 Transfer posting plant to plant in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing plant to stock in transfer in the receiving plant.
For technical reasons, you cannot carry out transfer postings from plant to plant in two steps for split valuation materials.
Removal from storage can be posted with movement type 603 via Shipping.
Possible special stock indicators:
None
305 Transfer posting plant to plant in two steps - placement in storage
The quantity is posted from stock in transfer to unrestricted-use stock in the receiving plant. The movement is not valuated.
You can use movement type 605 in Shipping to post the goods receipt with reference to the delivery.
Possible special stock indicators:
None
309 Transfer posting material to material
The quantity is posted from unrestricted-use stock of the issuing material into unrestricted-use stock in the receiving material.
Prerequisite: both materials have the same stock keeping unit.
Possible special stock indicators:
E, O, Q, V, W
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators:
E, K, M, Q
See also 321, 343, 349, and 455 for other stock types
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
Possible special stock indicators:
None
315 Transfer posting storage location to storage location in two steps - placement in storage
In the receiving storage location, the quantity is transferred from the stock in transfer to the unrestricted-use stock.
Possible special stock indicators:
None
317 Creation of a structured material from constituent components (Retail)
A material split into its components using movement type 319 can be rejoined using movement type 317.
Movement type 317 has the same effect as a cancellation of movement type 319.
Possible special stock indicators:
None
319 Split structured material into components (Retail)
You can enter the splitting of a structured material manually using movement type 319.
You can configure Customizing so that a structured material (for example, asset, prepack, or display is automatically split into its components at goods receipt. The system posts the split using movement type 319. In this process, the BOM header material is posted and each of the component stocks are increased. You can also use this function if you use the Warehouse Management System (LE-WM).
Possible special stock indicators:
None
Example:
A box of the structured material S contains 3 pieces of the component K1 and 4 pieces of the component K2. The following material document items result after the material is split at goods receipt:
Qty Unit Material Movement type
1 box S 101 +
1 box S 319 -
4 piece K1 319 +
5 piece K2 319 +
321 Transfer posting stock in quality inspection - unrestricted-use stock
The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here you can post the quantity to another storage location.
You cannot use this movement type for QM-managed materials since transfer posting for these materials takes place via the usage decision.
Possible special stock indicators:
E, K, O, Q, V, W
323 Transfer posting storage location to storage location - stock in quality inspection
The quantity is transferred from stock in quality inspection in the issuing storage location into stock in quality inspection in the receiving storage location.
Possible special stock indicators:
E, K, Q
325 Transfer posting storage location to storage location - blocked stock
The quantity is transferred from blocked stock in the issuing storage location into blocked stock in the receiving storage location.
Possible special stock indicators:
E, K, Q
331 Withdrawal of sample from stock in quality inspection
The sample is destructive, that is, the withdrawal has the same effects asscrapping.
Possible special stock indicators:
E, K, Q, V, W
333 Withdrawal of sample from unrestricted-use stock
The sample is destructive, that is, the withdrawal has the same effects asscrapping.
Possible special stock indicators:
E, K, Q, V, W
335 Withdrawal of sample from blocked stock
The sample is destructive, that is, the withdrawal has the same effects asscrapping.
Possible special stock indicators:
E, K, Q
340 Revaluation of batch
Using this movement type, you can change a batch's valuation type. The system automatically calls up this movement type when you want to revaluate a batch by choosing Logistics -> Central Functions -> Batch Management -> Batch -> Change (transaction code MSC2N). There is no reversal movement type.
Possible special stock indicators:
E, Q
341 Change in status of a batch (available to unavailable)
This goods movement is automatically created when there is a change in the status of a batch and it is also used to transfer the unrestricted-use stock into restricted-use stock.
Possible special stock indicators:
E, K, M, O, Q, V, W
343 Transfer posting blocked stock - unrestricted-use stock
The quantity is transferred from blocked stock to unrestricted-use stock. You can also post the quantity to another storage location.
Possible special stock indicators:
E, K, Q
349 Transfer posting from blocked stock to stock in quality inspection
The quantity is transferred from blocked stock to stock in quality inspection. Here you can transfer the quantity to another storage location.
Possible special stock indicators:
E, K, Q
351 Goods issue for a stock transport order (without Shipping)
The quantity is transferred from unrestricted-use stock in the issuing plant to stock in transit in the receiving plant.
Movement type 351 is only used if the goods issue is posted without a delivery in Shipping. A goods issue for a stock transport order with delivery in Shipping is posted using movement types 641, 643, 645, or 647.
The transfer posting is also possible for materials with split valuation.
The goods issue for a stock transport order takes place using movement type 101.
Possible special stock indicators:
E, Q
For special stock indicators E and Q and for purchase orders assigned to an account, ensure that the quantity is not posted to the stock in transit in the receiving plant.
411 Transfer posting of special stocks E, K, and Q to company's own stock
The quantity is transferred from unrestricted-use special stock E (sales order stock), unrestricted-use stock K ( consignment stock) and unrestricted-use special stock Q (project stock) to unrestricted-use storage location stock. The corresponding special stock indicator is required for this movement.
If you do not use the special stock indicator, the system uses this movement type and movement type 311.
For sales order stock, you can change the material number for this movement if you manage the material in your company's own stock under a different material number (for example, for configurable materials).
Consignment stock is transferred to valuated stock, thus resulting in a vendor liability.
413 Transfer posting to sales order stock
You can use this movement type to carry out a transfer posting from your own unrestricted-use stock, other sales order stock, consignment stock, and project stock to a sales order stock.
Possible special stock indicators:
E, K, Q
415 Transfer posting to project stock
You can use this movement type to carry out a transfer posting from your own unrestricted-use stock, consignment stock, and other project stock to a project stock.
Possible special stock indicators:
E, K, Q
441 Transfer posting non-tied to tied empties
Part of the stock of an "empties" material assigned to a full product is managed in the stock type "tied empties".
Empties stock not assigned to a full product forms part of the stock type "unrestricted-use".
Using movement type 441, you can make a transfer posting for an empties material from the stock type "unrestricted-use" to the stock type "tied empties". Movement type 442 reverses this transaction.
Example:
The full product "beer" has a stock of 15 cases. Part of the empties components "bottle" and "case" is tied empties stock.
Refer example in next page
Material unrestricted-use tied empties
Beer 15
Bottle 240 360
case 10 15
451 Returns from customer (without Shipping)
Using movement type 451, you post customer returns without a returns delivery in Shipping into blocked stock returns.
Possible special stock indicators:
None
See also: 453, 651, 653
453 Transfer posting blocked stock returns to unrestricted-use stock
The quantity is transferred from blocked stock returns to unrestricted-use stock and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
Possible special stock indicators:
None
455 Transfer posting storage location to storage location - blocked stock returns
The quantity is transferred from blocked stock returns of the issuing storage location to blocked stock returns of the receiving storage location.
Possible special stock indicators:
None
457 Transfer posting blocked stock returns to quality inspection stock
The quantity is transferred from blocked stock returns to quality inspection stock and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
Possible special stock indicators:
None
459 Transfer posting blocked stock returns to blocked stock
The quantity is transferred from blocked stock returns to blocked stock and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
Possible special stock indicators:
None
501 Goods receipt without purchase order - unrestricted-use stock
This movement type is used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
For a goods receipt for purchase order (
101), the receipt of returnable transport packaging can be entered using movement type 501 and special stock indicator M.
Possible special stock indicators:
E, K, M, Q
503 Goods receipt without purchase order - stock in quality inspection
This movement type is used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
Possible special stock indicators:
E, K, Q
505 Goods receipt without purchase order - blocked stock
This movement type is used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
Possible special stock indicators:
E, K, Q
511 Free-of-charge delivery from vendor
The quantity is posted to unrestricted-use stock. If there is a material with moving average price, the moving average price is reduced accordingly.
Possible special stock indicators:
None
521 Goods receipt without order - unrestricted-use stock
This movement type is used for deliveries from production that are not based on an order.
Possible special stock indicators:
E, Q
523 Goods receipt without order - stock in quality inspection
This movement type is used for deliveries from production that are not based on an order.
Possible special stock indicators:
E, Q
525 Goods receipt without order - blocked stock
This movement type is used for deliveries from production that are not based on an order.
Possible special stock indicators:
E, Q
531 Goods receipt from by-product from the order
The goods receipt of a by-product usually refers to an order, but it can be entered without a reference.
If a component is entered with a negative quantity in the order, a reservation item is created with 531 (instead of 261 ). The receipt of a by-product can be entered when the component for the order is withdrawn from stock or it can be entered as an 'other goods receipt'.
Possible special stock indicators:
E, Q
See also: 545 and 581
541 Transfer posting unrestricted-use stock - stock of material provided to vendor
With this movement type you provide the subcontractor with the components required for subcontract orders. The quantity is posted into unrestricted-use stock of material provided to vendor.
If there is a goods receipt for a subcontract order ( 101 ) consumption of components is posted from this stock.
The transfer posting can be posted via a delivery in Shipping.
Possible special stock indicators:
None
543 Consumption from stock of material provided to vendor
This movement cannot be entered manually.
The consumption of components for a subcontract order is posted using goods receipt for purchase order ( 101). It can be corrected by means of a subsequent adjustment.
For special stock indicators E and Q, you must ensure that the quantity is not posted to the stock of material provided to vendor, but to the unrestricted-use sales order or project stock.
Possible special stock indicators:
E, O, Q
545 Goods receipt from by-product from subcontracting
If a component is entered with a negative quantity for the subcontract order, the receipt of the by-product is posted to stock provided to vendor during goods receipt for purchase order or during the subsequent adjustment.
For special stock indicators E and Q, you must ensure that the quantity is not posted to the stock of material provided to vendor, but to the unrestricted-use sales order or project stock.
Possible special stock indicators:
E, O, Q
551 Scrapping from unrestricted-use stock
Possible special stock indicators:
E, K, O, Q, V, W
553 Scrapping from stock in quality inspection
Possible special stock indicators:
E, K, O, Q, V, W
555 Scrapping from blocked stock
Possible special stock indicators:
E, K, Q
561 Initial entry of stock - unrestricted-use stock
During
initial entry of stock balances, when the R/3 system is active, you enter the physical warehouse stock figures or the book inventory from your old system into the R/3 Materials Management component. This data entry usually takes place by means of batch input.
Possible special stock indicators:
E, K, M, O, Q, V, W
563 Initial entry of stock - quality inspection
During
initial entry of stock balances, when the R/3 system is active, you enter the physical warehouse stock figures or the book inventory from your old system into the R/3 Materials Management component. This data entry usually takes place by means of batch input.
Possible special stock indicators:
E, K, O, Q, V, W
565 Initial entry of stock - blocked stock
During
initial entry of stock balances, when the R/3 system is active, you enter the physical warehouse stock figures or the book inventory from your old system into the R/3 Materials Management component. This data entry usually takes place by means of batch input.
Possible special stock indicators:
E, K, Q
571 Goods receipt for assembly order to unrestricted-use
This movement cannot be entered in Inventory Management. It can only be entered in repetitive manufacturing using the Goods receipt for sales order function.
Possible special stock indicators:
E, Q
573 Goods receipt for assembly order to quality inspection
This movement cannot be entered in Inventory Management. It can only be entered in repetitive manufacturing using the Goods receipt for sales order function.
Possible special stock indicators:
E, Q
575 Goods receipt for assembly order to blocked stock
This movement cannot be entered in Inventory Management. It can only be entered in repetitive manufacturing using the Goods receipt for sales order function.
Possible special stock indicators:
E, Q
581 Goods receipt of a by-product from the network
The goods receipt of a by-product usually refers to a network, but can be entered without reference.
If a component is entered with a negative quantity in the network, a reservation is created with 581 (instead of 281 ). The receipt of a by-product can be entered during the withdrawal for the network or as an 'other goods receipt'.
Possible special stock indicators:
E, Q
601 Goods issue for delivery (Shipping)
In Shipping, this movement type is created automatically with the Goods issue for delivery function.
The quantity is taken from unrestricted-use stock.
Possible special stock indicators:
E, K, Q
603 Goods issue for stock transport order (Shipping) with additional item
If you issue goods for a stock transport order in Shipping using movement type 641, you can use this movement type to assign an extra item to the order.
The ordered material is transferred to the stock in transit of the receiving plant. The material for the additional item is transferred from unrestricted-use stock in the issuing plant to stock in transfer in the receiving plant.
You can also use this movement type without referencing a purchase order.
Possible special stock indicators:
None
See also: 303, 641
605 Goods receipt for a stock transport order (Shipping) with additional item
You can use this movement type to transfer into unrestricted-use stock the material you posted into stock in transfer in the receiving plant using movement type 603. You post the goods movement with reference to the purchase order (if available) or the delivery.
Possible special stock indicators:
None
See also: 305 and 641
621 Transfer posting unrestricted-use - returnable packaging (Shipping)
The quantity is transferred from unrestricted-use stock to the returnable packaging stock at customer.
Possible special stock indicators:
none
623 Goods issue from returnable packaging stock at customer (Shipping)
This quantity is withdrawn from unrestricted-use returnable packaging stock at the customer.
Possible special stock indicators:
V
631 Transfer posting unrestricted use - customer consignment stock (Shipping)
The quantity is transferred from unrestricted-use stock to consignment stock at customer.
Possible special stock indicators:
E, Q
633 Goods issue from customer consignment (Shipping)
The quantity is withdrawn from unrestricted-use consignment stock at the customer.
Possible special stock indicators:
W
641 Goods issue for a stock transport order (Shipping)
The quantity is transferred using a delivery in Shipping from unrestricted-use stock of the issuing plant to stock in transit of the receiving plant.
The goods receipt for the stock transport order takes place using movement type 101 and can, if required, refer to the purchase order or to the delivery. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movement type 671.
Possible special stock indicators:
E, Q
For the special stock indicators E and Q and for purchase orders assigned to an account, you must ensure that the quantity is not posted to the stock in transit of the receiving plant.
See also: 351, 643, 671
643 Goods issue for a cross-company
stock transport order (Shipping)
It is used only for cross-company stock transport orders with SD billing and invoice. The quantity is withdrawn from the unrestricted-use stock of the issuing plant. No stock in transit is created here. In the second step, the goods receipt must be entered in the receiving plant. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movement type 673.
Possible special stock indicators:
E
See also: 351, 641, 673
645 Goods issue for a cross-company
stock transport order in one step (Shipping)
Unlike movement type 643 when a goods issue is posted using movement type 645, a goods receipt line is generated automatically 101). If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movment type 675.
Possible special stock indicators:
E
See also: 675
647 Goods issue for a stock transport order in one step
(Shipping)
Unlike movement type 641 when a goods issue is posted using movement type 647, a goods receipt line (movement type 101) is generated automatically in the receiving plant. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movement type 677.
Possible special stock indicators:
E, Q
See also: 677
651 Returns from customer (Shipping)
Using movement type 651, you post returns from a customer with a return delivery in Shipping to blocked stock returns.
Possible special stock indicators:
None
See also: 451, 453, 653
653 Returns from customer (Shipping) to unrestricted-use stock
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators:
E
See also: 451, 453, 651
655 Returns from customer (Shipping) to stock in quality inspection
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators:
E
See also: 451, 453, 651
657 Returns from customer (Shipping) to blocked stock
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators:
E
See also: 451, 453, 651
661 Returns to vendor via Shipping
As with movement type 502, a return delivery to the vendor is entered without reference to the purchase order, but the goods issue is posted via a delivery in Shipping.
Possible special stock indicators:
E
671 Returns for stock transport order via Shipping
If a purchase order item is marked as a returns item in a stock transport order using movement type 641 when a goods receipt for a stock transport order ( 101) is posted, the return is posted to stock in transit using movement type 161. When the return arrives, the issuing plant posts the goods receipt for the return using movement type 671. Movement type 671 (like movement types 352 and 642) reduces the receiving plant's stock in transit and increases the issuing plant's unrestricted-use stock.
Possible special stock indicators: E, Q
673 Returns for cross-company stock transport order
(Shipping)
If you post a goods issue for a cross-company stock transport order with returns items using movement type 643 via Shipping, the returns are transferred to unrestricted-use stock in the issuing plant in a second step using movement type 673.
Possible special stock indicators:
None
See also: 643
675 Returns for cross-company stock transport order
(Shipping) in one step
If you use movement type 645 to post a goods issue for a cross-company stock transport order with returns items in one step, the returns are transferred to unrestricted-use stock in the issuing plant using movement type 161 in the receiving plant and movement type 675 in the issuing plant.
Possible special stock indicators:
None
See also: 645
677 Returns for stock transport order in one step (Shipping)
If you use movement type 647 to post a goods issue for a stock transport order with returns items in one step, the returns are transferred to unrestricted-use stock in the issuing plant using movement type 161 in the receiving plant and movement type 677 in the issuing plant.
Possible special stock indicators:
E, Q
See also: 647
701 Inventory differences in unrestricted-use stock (MM-IM)
This movement is generated automatically during inventory difference posting in Inventory Management.
Possible special stock indicators:
E, K, M, O, Q, V, W
703 Inventory differences in quality inspection stock (MM-IM)
This movement is generated automatically during inventory difference posting in Inventory Management.
Possible special stock indicators:
E, K, M, O, Q, V, W
707 Inventory differences in blocked stock (MM-IM)
This movement is generated automatically during inventory difference posting in Inventory Management.
Possible special stock indicators: E, K, M, Q
711 Inventory differences in unrestricted-use stock (LE-WM)
This movement is generated automatically when you post inventory differences in the Warehouse Management System.
Possible special stock indicators: E, K, M, Q
713 Inventory differences in quality inspection stock (LE-WM)
This movement is generated automatically when you post inventory differences in the Warehouse Management System.
Possible special stock indicators:
E, K, M, Q
715 Inventory differences in blocked stock returns (LE-WM)
This movement is generated automatically when you post inventory differences in the Warehouse Management System.
Possible special stock indicators:
None
717 Inventory differences in blocked stock (LE-WM)
This movement is generated automatically when you post inventory differences in the Warehouse Management System.
Possible special stock indicators: E, K, M, Q
721 - Sales value receipt - not affecting margins (Retail)
The movement is generated automatically when the sales price of a value-only material is changed (total sales price revaluation on the posting date).
Possible special stock indicators:
None
731 - Sales value receipt - affecting margins (Retail)
The movement is generated automatically when the sales price of a value-only material is changed (partial sales price revaluation on the posting date).
Possible special stock indicators:
None
Regards
Vishal

MM Movement types for stock transit!

Dear Experts!
Can anyone let me know the movement types used for corresponding goods transaction in MM,
i.e. for goods reciepts all possible movement types and goods issues all movement types.
Regards,
Parwez

Hi,
GI: goods issue (consumption/usage, withdrawal) or goods receipt without reference
GR: goods receipt with reference to a purchase order or production order
GD: goods movement with reference to a delivery (from the Shipping component)
RE: return delivery, return, reversal
RE: returns reversal
TP: transfer to company's own stock
TF: transfer posting
TR: reversal of transfer posting
SLS: sales value receipt
101 GR goods receipt
102 Reversal of GR
103 GR into blocked stck
104 Rev. GR to blocked
105 GR from blocked stck
106 Rev.GR from blocked
107 GR to Val. Bl. Stock
108 GR to Val. Bl. Rev.
109 GR fr. Val. Bl. St.
110 GR fr. Val. Bl. Rev.
112
121 GR subseq. adjustm.
122 RE return to vendor
123 RE rtrn vendor rev.
124 GR rtrn blocked stck
125 GR rtn blkd stck rev
131 Goods receipt
132 Goods receipt
141 GR G subseq. adjustm
142 GR G subseq. adjustm
161 GR returns
162 GR rtrns reversal
201 GI for cost center
202 RE for cost center
221 GI for project
222 RE for project
231 GI for sales order
232 RE for sales order
241 GI for asset
242 RE for asset
251 GI for sales
252 RE for sales
261 GI for order
262 RE for order
281 GI for network
282 RE for network
291 GI all acc. assigmts
292 RE all acct assigmts
301 TF tfr.plnt.to plnt.
302 TR tfr.plnt.to plnt.
303 TF rem.fm.stor.to pl
304 TR rem.fm.stor.to pl
305 TF pl.in stor.in pl.
306 TR pl.in stor.in pl.
309 TF tfr.ps.mat.to mat
310 TR tfr.ps.mat.to mat
311 TF tfr. within plant
312 TR transfer in plant
313 TF rem.fm.str.toSLoc
314 TR rem.fm.str.toSLoc
315 TF pl.in str.in SLoc
316 TR pl.in stor.inSLoc
317 Create struct. mat.
318 RE create struc. mat
319 Split structured mat
320 RE split struct.mat.
321 TF quality to unrest
322 TR quality to unrest
323 TF quality in plant
324 TR quality in plant
325 TF blocked in plant
326 TR blocked in plant
331 GI to sampling QI
332 RE to sampling QI
333 GI to sampling unre.
334 RE to sampling unre.
335 GI to sampl. blocked
336 RE to sampling blkd
340 TF bch revaluation
341 TF unrestr.to restr.
342 TF unr. to rstricted
343 TF blocked to unre.
344 TR blocked to unre.
349 TF blocked to qual.
350 TR blocked to qual.
351 TF to stck in trans.
352 TR to stck in trans.
401 TP own from sls.ord.
402 TP own to sales ord.
403 TP own from consgt.
404 TP own to consgt.
405 TP own from project
406 TP own to project
411 TP own to own
412 Reversal own to own
413 TP SLoc to sls order
414 Rev. SLoc to sls ord
415 TP SLoc to project
416 Rev. SLoc to proj.
441 TP unrstr.to tiedEmp
442 TP tiedEmp.to unrstr
451 GI returns
452 RE returns (rev.)
453 TP returns to own
454 TP own to returns
455 TF st.tfr. returns
456 TR St.tfr. returns
457 TP Ret.to own QIS
458 TP Own QIS to ret.
459 TP Ret.to own blckd
460 TP Own blckt to ret.
501 GI receipt w/o PO
502 RE receipt w/o PO
503 GI receipt to qual.
504 RE receipt to qual.
505 GI receipt to blockd
506 RE receipt to blockd
511 GI deliv. w/o charge
512 RE deliv. w/o charge
521 GI receipt w/o PrOrd
522 RE receipt w/o PrOrd
523 GI quality w/o PrOrd
524 RE quality w/o PrOrd
525 GI blkd w/o prod.or.
526 RE blocked w/o PrOrd
531 GI by-product
532 RE by-product
533 GI by-product
534 RE by-product
535 GR by-prod. sls.ord.
536 GR by-prod. sls.ord.
541 GI whse to subc.stck
542 RE subctrStck toWhse
543 GI issue sls.ord.st.
544 GI receipt sls.or.st
545 GI rcpt SC by-prod.
546 GI issue SC by-prod.
551 GI scrapping
552 RE scrapping
553 GI scrapping QI
554 RE scrapping QI
555 GI scrapping blocked
556 RE scrapping blocked
557 GI adjust. transit
558 GI adjust. transit
561 GI entry of st. bals
562 RE entry of st.bals.
563 GI EntrStBals: QI
564 RE EntrStBals: QI
565 GI EntrStBals: blckd
566 RE EntrStBals: blckd
571 GI receipt assembly
572 RE receipt assembly
573 GI rcpt QI assembly
574 RE rcpt QI assembly
575 GI rcpt blkd assmbly
576 RE rcpt blkd assmbly
581 GI by-prod. network
582 RE by-prod. network
601 GD goods issue:delvy
602 RE goods deliv. rev.
603 TF rem.fm.stor.to pl
604 TR rem.fm.stor.to pl
605 TF pl.in stor.in pl.
606 TR pl.in stor.in pl.
617 Cre. Str. Mat. Cons.
618 RE Cr. Str. Mat. Con
619 Rem. Str. Mat. Cons.
620 RE Rem. Str Mat Cons
621 GI ret.pack.:lending
622 GI ret.pack:ret.del.
623 GI iss:cust.ret.pack
624 GI rcpt:cust.re.pack
631 GI consgmt: lending
632 GI consgmt:ret.delvy
633 GI iss: cust.consgmt
634 GI rcpt:cust.consgmt
635 TF consgmt lending
636 TR consgmt ret. del.
641 TF to stck in trans.
642 TR to stck in trans.
643 TF to cross company
644 TR to cross company
645 TF cross company
646 TR cross company
647 TF to stck in trans.
648 TR to stck in trans.
651 GD ret.del. returns
652 GD ret.del. retn rev
653 GD returns unrestr.
654 GD returns unr. rev.
655 GD returns QI
656 GD returns QI rev.
657 GD returns blocked
658 GD returns blk. rev.
661 GI returns to vendor
662 RE ret. to vdr revrs
671 TR to stck in trans.
672 TF to stck in trans.
673 TF to cross company
674 TR to cross company
675 TR cross company
676 TF cross company
677 TR to stck in trans.
678 TF to stck in trans.
6A1 TF GI1
6A2 TR GI1
6A3 TF CC GI1
6A4 TR CC GI1
6A5 TF CC GI1
6A6 TR CC GI1
6A7 TF GI1
6A8 TR GI1
6B1 TF GI2
6B2 TR GI2
6B3 TF CC GI2
6B4 TR CC GI2
6B5 TF CC GI2
6B6 TR CC GI2
6B7 TF GI2
6B8 TR GI2
6K5 TF GI2 consi
6K6 TR GI2 consi
6W5 TF GI1 consi
6W6 TR GI1 consi
701 GR phys.inv.: whse
702 GI phys.inv.: whse
703 GR phys.inv: QI
704 GI phys.inv: QI
707 GR phys.inv.:blocked
708 GI phys.inv.:blocked
711 GI InvDiff.:whouse
712 GR InvDiff.:wrhouse
713 GI InvDiff: QI
714 GR InvDiff: QI
715 GI InvDiff.:returns
716 GR InvDiff.:returns
717 GI InvDiff.: blocked
718 GR InvDiff.: blocked
721 SlsVal.rec.n.afftMgs
722 SlsVal.iss.n.afftMgs
731 SlsVal.rec. afftgMgs
732 SlsVal.iss. afftgMgs
801 GR adv. inv. + tax
802 RGR ad. inv. + tax
803 GR AI ICMS/IPI
804 RGR AI ICMS/IPI
805 GR bl. AI w. tax
806 RGR bl. AI w. tax
811 GR TP dely w. tax
812 RGR TP dely w tax
815 GR B TP dely w. tax
816 RGR B TP dely w. tax
821 GR val. VS w. tax
822 RGR val. VS w. tax
825 GR B val. VS w. tax
826 RGR B val. VS w. tax
833 Reval. iss. w. tax
834 R reval. iss. w tax
835 Reval. rec. w. tax
836 R reval. rec. w tax
841 GR RTP
842 RGR RTP
843 GR RTP w. tax
844 RGR RTP w. tax
861 GR TF SD/MM
862 GI TF SD/MM
863 GI TF SD/MM return
864 GR TF SD/MM return
901 GI internal c.center
911 GI receipt w/o PO
922 RE return to vendor

Replace 601 movement with 301 movement type in outbound Delivery

Hello All,
We are using SAP - 4.6 C system.
We have a requirement to create a customer outbound delivery for a corresponding customer Scheduling Agreement but postings should be similar to 301 movement type against 601 movement
When we use 601 movement type - Material Document and corresponding Accounting Documents are created.
We do not want Material Document and corresponding Accounting Documents and at the same time should not use TSA / STO functionality
We want to use only Sales Outbound delivey fucntionality only with 301 postings.
So we tried to use 301 movement type to post an outbound Delivery and below is the error. Please advise a solution to fix this error. or an alternative approach to create an out bound delivery which should not post to an accounting document.
Error -
Update control of movement type incorrect (entry 301 X X _ L _ V)
Message no. M7 226
Diagnosis
The system could not find entry 301 X X _ L _ V in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
u2022 For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
u2022 For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
Regards,
Siva

Hello all, Jurgen,
Thanks for your responses.
Today, we use 601 movement type for Outbound delivery which creates Material Document and Accounting Documents.
Instead of this, we would like to replace 601 with 301 movement as this has simple plant to plant transfer postings in one of our specific scenario.
We are getting below error when we do Post goods Issue on Outoubnd delivery: we just replaced SD: Schedule line category movement to 301.
Update control of movement type incorrect (entry 301 X X _ L _ V)
Message no. M7 226
Diagnosis
The system could not find entry 301 X X _ L _ V in any of the movement type control tables
Is this the correct approach? Even if we try to create new custom movement ref to 301 to fulfill 301 X X _ L _ V.
Will this work? I am sure in addition to this we need some user exit development.
Presently, this is SD Outbound delivery cycle and will continue with same approach.
we also have our regular scenarios which work with 601. This is one of our exception business cases where we need affects similar to 301.
For above case we can not use STO/TSA with some master data changes as we have already have same plants set-up for regular STO/TSA processes.
The above requirement is special case in one of the business cases.
Thanks
Siva

Problem in movement type in return delivey

Hi,
For return order , I configure the system to use Schedule line category "DN" movement type "651" , but after Post goods issue, system did not reduce the inventory of related Storage Location and did not create account document for this delivery.
So, It is correct to use this movement type or not? And which movement type is suitable for this?
Thanks.
Lida.

Hi
As you are doing Return Order , after doing Post Goods Receipt(PGR) check wheather stock is getting updated or not. Also check wheather accounting document configuration has been maintained for the PGR
Check the FI setting through T.Code OBYC , Offsetting Entry - GBB (COGS) & Inventory Setting - BSX ( Inventory Posting)
Entries COGS - Positive ; Inventory Accounting - Negative
Regards
Srinath

Cancellation of Mat Document for Return delivery mov 161(Here Mov Type 922)

Hi SAP Support,
     Myself got an issue relevent to Wrong MIGO. User due to wrong concept did MIGO where Movement type was 922 though its return PO (Means Return PO
is ticked - Mov type 161).
Explanation : At the time of MIGO , default movement type was 101, so automatically it should pick 161 at the time of Good Received.
          But here when the user open the MIGO Screen, last movement type was showing i.e. 901. And user did MIGO where it changed automatically to 922.
Now when I cancelled the document, flow was :
          a.      5000147271 - 922
          b.      5000151684 - 161
          c.     5000151730 - 162
          d.     5000152339 - 161
Which is wrong as per my perception and i.e. why not maching the same.
But while doing the Same in Quality Server with the Same Documents (Just refreshed 2 days back), flow is
          a.      5000147271 - 922
          b.      5000151684 - 123
          c.s     5000151730 - 161
     Which is perfect one. And this should be the results. Now my reuirment that how could I do managed the same way in Production. Please help me.
Regards,
Pinku

Hi,
Can you please explain as to what this "9" series movement type represent.Is the movement type "922" a copy of the movement type "122" ?
Kindly make a note that the reversal movement types are determined from the configuration for "Copy ,Change Movement types" T code - OMJJ. Here select any movement type & click on "Reversal/follow-on movement types" for which you want to know the reversal movement type. Hope this gives you an idea for resolving the issue.
Regards
Swapnil

Movement type for Delivery

Hello
For Consignment Fill Up Delivery which when created and PGI it is using a movement type 631 which is transferring goods from xxxx storage location to a unknown storage location. What I need is I need to make a change which when delivery is issued, the goods must be transferred from xxxx storage location to yyyy storage location. How can I do this. Please Advise.
Thnks
Vik

My Scenario is
Plant abcd Storage Loc xxxx
Plant abcd Storage Loc yyyy
Plant abcd Storage Loc zzzz
When I create a Consignment Fill up Delivery the goods must be moved from xxxx to yyyy but instead of that now it is moving to xxxx to zzzz. How do I make this change?
Thanks
Vik

Output type for Proforma Invoice for return delivery from delivery type RLN

Client require Output type Proforma Invoice for return delivery to vendor. As such return item category is not relevant for pricing so from delivery to proforma invoice can not have with p-ricing. I got quantity correct but pricing is coming Zero.
Client have ZPAC as packing list output type from delivery which shows quantity and pricing. So decided to use the same logic to pull pricing for proforma invoice from delivery.
Here delivery has standard output ZPAC as packing list with access sequence Z002 as Delivery Type.
I want to pop up output type for all return delivery so using access sequence with delivery type/vendor.
Vendor filed does not exist in delivery output type so brought that firld LIFNR.
It is assigned to procedure and maintained ZPRO output type for Proforma invoice. Asigned VV21 on front end.
Problem Still automatic output type ZPRO is not poping up. What type of access sequence will help me to pop up or what in configuration am I miising?
Appreciate help for solution at earliest.

Hi Padamsree,
I know Pricing & output very well. I need profomra invoice to be printed with quantity & value for return goods to the vendor. Pricing is associated with Item category RLLN for delivery type RLL which is return type delivery.
I need to have pricing in my Proforma invoice which is copied from delivery to billing document VTFL. Just check well how it is working in the system & if you know please answer so that it should be workable on the system. As theoretical answer may not be helpful. Appreciate for your time.
Thanks

Different movement types for goods issue via outbound delivery

Hi gurus,
How can I use different movement types for goods issue via outbound delivery?
Thanks&Best Regards,
Burcu

To use different schedule lines, we need different item types and different document types. Is that right?
Is there a user exit in outbound delivery to post goods issue?
Thanks...

No delivery type for returns processing assigned to item 00010

Dear all,
I want to create a Return Purchasing Order.
I have got an error: No delivery type for returns processing assigned to item 00010
Please help to to find out problem. What do i have to check?

Hi,
Regarding the error ME392, please check the customizing under
the IMG path:
Materials Management
-> Purchasing
   -> Purchase Order
      -> Returns Order
         -> Store Return
Here, for the supplying plant in your Cross-company-code return, you
need to set up a delivery type.
In order to know the supplying plant, please, open the vendor master
data (XK03).
Select the 'Purchasing data' section.
Once you are in the screen SAPMF02K 310 follow the menu path 'Extras' ->
'Add.purchasing data'.
Here you will see the Plant that is linked to your vendor.
So, now, for this Plant, under the IMG path mentioned before,
set a a delivery type for the store return (NCR - Ret.StTranspOrd CC
can be used, for example).
Best Regards,
Arminda Jack

Movement type for customer supplied packing material returns

Hi,
The scenario is like this,customer will give the packing material to the company.Company does the service required & return that packing material to customer.Presently we are using 624V movement type can you suggest some other movement type for this.
Regards,
Rajesh

hi,
this is to inform you that,
if customer is supplying the packaging material to us receive it through 501 - M and Issue 502 - M, manually if you want to track the packing material wise take the material into NON VALUATED ITEM.
you can create a Z report for the same and the fields in that is,
material number, packing material associated with that, quantity received thru 501 - M and consumed against 502 - M and GI quantity.
balajia

Change of Movement type for Return delivery of Goods Issue doc in config

Similar Messages

Maybe you are looking for