Change of number with existing contract

I have been receiving regular texts and calls from unknown numbers for months now and I was wondering it it is possible to change my number even though I am on an existing contract? When I block the callers, more and more numbers begin to text/call and it gets annoying a lot of the time as I can't stop it

Hi, 
You need to call EE CS and ask them for a new number. Please ensure you dont end up with a new line just a new phone number. 
Thanks, 

Similar Messages

  • How to change serial number with existing one

    dear all,
    Our user create 2 different serial number with same material. let me say A and B. A is the correct serial number but fault historical. and B is the fault serial number but correct historical. The question is can we change the serial number, A with B and still got the correct historical from B
    Regards

    if both the serial number are present in stock & are assigned to a wrong material in this case what you can do is :
    Issue goods through movement 201 alongwith the existing serial numbers (mismatched) against a cost center & GL (Stock Adjustment)
    Receive goods through movement 202 with correct Serial number a cost center & GL (Stock Adjustment).
    eg. in your case :
    Document 1 with movement 201 to remove mismatched Serial number  :
    Material-- Serial Number-----Qty
    A-- 1--
    1
    B--  2--
    1
    Status of both serial number will change from ESTO to AVLB
    Document 2 with movement 202 to assign correct serial number :
    Material-- Serial Number-----Qty
    A-- 2--
    1
    B--   1--
    1
    this way you can resolve serial number mismatch case....

  • Changing Asset number in Value contract

    hi experts,
    I want to change asset number in Value contract .
    In ME32K , i am not able change as it is grey field.
    Documents are not generated wrt this contract.
        thanks in advance
    regardsjai

    Hi,
    Check in SPRO > MM > Purchasing > Account Assignment > Maintain Account Assignment Categories > Here for "A", check "Asset" is in Display mode, if yes then make it "optional" and then try in ME32K.

  • Web service php file: unable to change "inStock" number with "Product_UpdateInsert"

    I am new to php and can't figure out how to change the in stock number through the eCommerce api.
    Here is what I am trying:
    I'm sure this example looks stupid to all the pros out there.
    If someone could just point me in the right direction for resources, that would be helpful.
    I suspect "productList" is where it is failing. It gives me no errors but doesn't update the "inStock" quantity to 1900 either.
    <?php
    $_prod = array("productId" => 2345678 , "productCode" => "YoYo" , "productName" => "4-Piece Accessory Kit" , "inStock" => 1900);
    $_pass = array("username" => "username", "password" => "password" , "siteId" => 1234567 , "productList" => $_prod);
    $client = new SoapClient("https://domain.worldsecuresystems.com/CatalystWebService/CatalystEcommerceWebservice.asmx? WSDL");
    $result = $client->__soapCall('Product_UpdateInsert', array('parameters' => $_pass));
    ?>

    Here is another version I tried and got the same result.
    <?php
    $_prod = array(
      'productId' => 2345678,
      'supplierCommission' => 0,
      'weight' => 24,
      'inStock' => 1900,
      'inventoryControl' => true,
      'canPreOrder' => false,
      'captureDetails' => false,
      'isOnSale' => false,
      'hideIfNoStock' => false,
      'isGiftVoucher' => false,
      'enableDropShipping' => false,
      'excludeFromSearch' => false,
      'cycletypeCount' => -1,
    $_list = array('Products' => $_prod);
    $_products = array('ArrayOfProducts' => $_list);
    $_pass = array('username' => 'username',
      'password' => 'password',
      'siteId' => 1234567,
      'productList' => $_products);
    $client = new SoapClient('https://domain.worldsecuresystems.com/CatalystWebService/CatalystEcommerceWebservice.asmx? WSDL',array('trace' => 1));
    $result = $client->__soapCall('Product_UpdateInsert', array('parameters' => $_pass));
    print_r(get_object_vars($result));
    echo $result;
    ?>

  • New Iphone with existing Contract...?

    Hello Everyone,
    This is my first post so please forgive me if i posted it in the wrong section. I have the original iphone (2G) which i purchased over two years ago at an apple store in NY. I opened a two year contract online at the time with AT&T. However, my contract expired in February 2010, and I am currently on a month to month with AT&T. Currently i am paying $20.00 for unlimited data. My question is if i purchase the new Iphone 4G will i be forced into opening a new two year contract with their new data plan charges or can i just activate the phone and continue with AT&T on a month to month basis? Any feedback would be greatly appreciated.
    Thanks

    AT&T sells the 3G and 3GS at the full retail sales price or at the no-commitment or no-contract price, which is the most expensive price. The iPhone can be activated on a post-paid month to month basis, but the data plan is required which costs $30/mo and does not include a 200 messaging allowance. The uimited data plan for the original iPhone which includes a 200 messaging allowance (SMS only) and costs $20/mo is a special unlimited data plan rate for the original iPhone only - not offered by AT&T for any other phone in the smart phone category.
    AT&T may sell the next generation iPhone or 4th generation iPhone (which probably won't be a 4G network compatible phone) at the full retail sales price which won't require a 2 year contract if you are able and willing to pay the full retail sales price, but the data plan probably won't be optional.
    If you buy the iPhone at AT&T's subsidized or discounted price, a two year contract will be required.

  • Change Qty Conversion in a contract?

    Hello,
    Does anybody know how can the Qty conversion EKPO-BPUMN or EKPO-BPUMZ be changed in an already existing contract line?? These fields can be seen by displying the item details in the Quantity and Price box.
    I know they can be change in the PIR (info record) but I don't get how to change them in a contract (ME33K)??
    Thanks!!
    Marc

    I close as no replies are given.

  • FaceTime (after changing phone number)

    Hi there,
    I bought an iPhone 4 on launch day, used FaceTime and worked fine. However I have since changed my number with my mobile network, now people cannot FaceTime me.
    If I FaceTime them though it shows up with my old number and if they then try to FaceTime my old number it works! Very confusing I know.
    Is there a way I can get this so it knows to FaceTime my new number?
    Thanks

    I think I have found the answer for this problem it worked for me I copied this from another website so thanks to him!!
    Sometimes you might have the wrong number showing under the field "My number" and the field is not editable.
    This might be either because you have ported your older number from a different network (via PUK code) to a new one or that you have changed sim
    Do the following to correct this:
    1) Switch of Wi-FI and make sure you get 3G receptiion
    2) Switch off Facetime and for few seconds
    3) Go to phone under settings and you should have the correct number
    4) Switch facetime back on by entering your iTunes credentials
    Hope this helped some of you

  • How do i change my number when i have a prepaid phone ??

    i am trying to change it and i cant figure out how to do it

    Sometimes is hard changing the number with the automated system. Try calling customer service, they will do it for you right away (No charges).

  • "File with specified name and version number already exists. Result code= -48."   ...????

    Recently I have been getting this error message when I try to record an audio track in Logic... "File with specified name and version number already exists. Result code = -48."  WHAT IS THE PROBLEM?????? It's making me furious!

    Hi
    As the message says, there is a file at the recording directory that has the same name:
    http://support.apple.com/kb/ht1618
    Try changing the name of the track (this sets the filename in later versions of Logic 9
    CCT

  • Changing Info Rec Prices when Contract Exists....no warning?

    Hi all,
    Quest1:
    Does anyone know a way to initiate a warning (or hard stop) in ME12 (Change Info Record) when a user is changing a price when a Contract exist for that material and vendor in the info record?
    The Superuser's goal: Stop other users from changing the Info record price when a Contract already in the system exists with a agreed price. How to put a hard stop? I know for a fact, there's a msg that compare's Material Std Cost with the Purchase Price and gives warning, but that doesn't service this purpose as Superuser want to block the Info Rec being changed if a Cotract Exists.
    Quest 2:
    Also, when a Contract's Price is changed (in ME32K) it will NOT change the Info Rec (created earlier may be manually or as a result of RFQ price selection) Price, eventhog the Contract "Info Update" indicator is set.
    Why is thi? Do you guys know?

    hi Duke,
    Asnwer 1 . you can make the message an error message, by this your problem will be solved and no one enter the same again....
    Answer 2. In the std sap system, PO price doesn't get updated in the inforecord, but the PO price history gets updated....
    This may be because, if you make the one PO and change it....and after this if you wanna make the other po with the last ie. ORIGINAL price...then we you use the inforecord to see the original price...while on the other hand you can also see the PO price history from ME1P for the same...
    Hope it helps...
    Regards
    Priyanka.P

  • J2E License Key File With Changed System Number

    Hello,
    During the last weeks, there had been some trouble according to the sneak preview licensing web site to get a new license key for special SAP systems like J2E, NSP etc.
    In the meantime, I used especially for my J2E instance via visual admin the button "install subsequent temp license" with success.
    Returning anew to the web site today, I saw that now we are able again to renew the license key for our trial systems and ordered successfully license keys for J2E and NSP instance.
    Because both systems have got new system numbers, I deleted the expired license key for NSP via saplicense -delete. Then I installed regularly the given new license key with success.
    After starting the J2E instance, I tried to delete the existing active license (see above) via installed licenses getting a message which let me stop my try to delete the license because I feared for to get trouble with the system afterwards.
    The exact text of the warning trying to delete the existing active license sounds:
    DELETE J2EE-Engine_ADA License:
    You are about to delete the license for the J2EE-Engine. This may lead to a shutdown of the running system. You will not be able to start the J2EE-Engine again without a valid license. Do you really want to proceed?
    Trying to install the given license from file (via General), I got the informational message:
    This system's system number is "xyz", but there is a license key for the system number "abc" in file path\J2E.txt. License key file path\J2E.txt doesn't contain any valid SAP license keys.
    License key(s) not completely installed.
    That was to be expected...
    So my questions are:
    1) What is to do when I want to implement the new given license key file which has another system number as the existing active one.
    2) How often can I use the possibility to prolong my active license via button "Install subsequent temp. license" in future without falling in trouble?
    Thank you for your answers.
    Regards
    Christian

    Before deleting the J2EE engine license, check the "Installed Licenses" tab and verify that there is another J2EE-engine license with Validity "Valid" and within a satisfactory date range.  Only under this situation will I feel comfortable with removing the additional/expired licenses.
    Your original message is a bit confusing ... let me see if I got it correctly.  You have been running your J2EE instance with temp licenses, because there was some issues w/ preview licensing on SAP's web site.  Now that you have finally received your preview license, you wish to install it.
    But since then, your system number has changed.  Do you mean system ID?  Since your example used a 3 character ('xyz' vs 'abc').  I think the SID is what you mean.  Because changing system number will not require a new license, but changing the SID will.
    So now you have the following.
    1. J2EE running on temp license with SID 'xyz'
    2. A new preview license for SID 'abc'
    What you need to do is:
    1. Request from SAP preview license for the SID that matches your system 'xyz'.  OR, change the SID of your system from 'xyz' to 'abc', which is not recommended ...especially w/ AS-JAVA.
    2. Install the new preview licenses.
    3. Verify preview licenses are valid.
    4. I don't believe you have to remove the temp licenses, it's overwritten when you install the permanent preview licenses.

  • Cannot Update Contingent Worker Number with API when no assignment exists

    Hi
    I am using hr_person_api.update_gb_person to update Contingent Worker Numbers (NPW_Number in PER_ALL_PEOPLE_F). This works fine apart from one exception. I get the following error: ORA-20001: You cannot enter a Contingent Worker number because you are not creating a Contingent Worker.
    The Contingent Worker failing has 4 records in PER_ALL_PEOPLE_F. The 3 date tracked (end dated) records update fine as expected....the new NPW_Number appears in PER_ALL_PEOPLE_F. However, the current active record does not update it returns the error mentioned. This appears to be because the person in question was terminated. (ie via Others and selecting End Placement in the screens).
    This person now shows as Ex-Agency Person Type. This process does not generate a record in PER_ALL_ASSIGNMENTS_F. I am wondering if this causes the API some confusion?
    I can go into the screen and manually change the Contingent Worker and it saves fine so I would expect the API to do the same. However it returns ORA-20001: You cannot enter a Contingent Worker number because you are not creating a Contingent Worker....for this single record only.
    Any suggestions as to what may be causing the API to return this and any workaround please?
    Many thanks in advance.

    Sometimes APIs are not behaving as Forms do.
    An ugly solution in this case could be reverse the termination (hr_ex_employee_api.reverse_terminate_employee), then update the Contingent Worker Number with your API, then terminate him/her again.

  • I'm moving from a iPhone 4S to an iphone 5s but and I'm changing SIM card with same number but I want to make sure that all my pictures go onto my new phone how can I do that?

    I'm moving from a iPhone 4S to an iphone 5s but and I'm changing SIM card with same number but I want to make sure that all my pictures go onto my new phone how can I do that?

    Hello Bethanygrace_m7,
    Thank you for contacting Apple Support Communities. You can take a look at this article about transferring content from your old iPhone to a new one:
    Transfer content from an iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/HT2109
    Here is another thread from the Communities about migrating data from an old iPhone to a new one:
    Migrating data from old to new iPhone?: Apple Support Communities
    https://discussions.apple.com/thread/2038778
    Regards,
    Jeff D.

  • How to make a correction on an invoice with a contract number ?

    Dear all,
    I'm a newbie.  Can someone please help me out with the following : order has been entered and contract has been assigned during the order input ...
    Now I need to make a ZRK or ZCR/ZDR for the order with another contract.   Whatever I try to change I always get the same message : Item ... alreade has a preceding document....    Anyone ???  Many thanks in advance !

    My problem :
    Order input has been done with contract assignemt.
    The contract that was assigned was (at that time) not ok so the order input and invoices to the customer where not correct.
    Contract has been modified (correct now) since.
    We now need to make a correction and apply the prices of the modified contract. 
    I first tried to make a ZRK but I keep getting the same sentence while trying to assign the contract.
    I would like to undo the contract before correction and apply the same contract that now is correct...

  • BAPI to change material assignment with serial number (IQ02)

    Hi Experts,
    Please let me know the BAPI to change material assignment with serial number in IQ02. I am using BAPI_EQUI_CHANGE, but this does not work. Waiting for Your valuable inputs...
    Thanks in advance,
    Birendra

    Hello Birendra,
    Honestly, I do not have good experience with the BAPI for serialnumber change...
    would suggest to explore function module:
    SERIALNUMBER_LIST_UPDATE
    or
    SERIALNUMBER_LIST_SAVE
    Also run ST05 to trace what kind of data it passed to these function modules by running IQ02!
    Cheers
    Krish

Maybe you are looking for