Change of Output type from WE01 to WE03

Hi,
I have assigned the GR with collective slip WE03,when I use Tcode MB90 i m not able to list all the material documents eventhough collective slip and print is active.I checked in MIGO transaction,output type was WE01.
How to change the ouput type of already posted GR's  from WE01 to WE03.
Pls advise
Regards,
Shrini

MB02 select your mat document and click the message tab and maintian your out put type.
If you want always this output type MN21 maintain the output type.
NACE also assign your smartform to your output type.'
Pls check it this will resolve your problem

Similar Messages

  • Triggering output type from VL02N

    Hi,
    I need to attach some kind of routine to VL02n.
    The requirement is that in VL02N, on goods issue, an output type is supposed to be triggered.
    Please suggest me as to how to trigger this output type on goods issue.
    The functionality is like this.......on triggering the output type, idocs are generated. SO i need to write a routine sort of from where i can trigger and then write the idoc related code

    Hi,
    just follow this link..it might be useful...
    [Automatic Output Type from VL01|http://wiki.sdn.sap.com/wiki/x/BY-jBw]
    Regards
    Kiran

  • How to change the file type from IMOVIE PROJECT to other types of file

    how to change the file type from IMOVIE PROJECT to other types of file??
    thank you very much for your help=]

    I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
    Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

  • Deleting completed output type from a PO

    How do you delete a completed output type from a PO?
    Thanks,
    John

    Cannot be done.  You have archive the PO itself.
    Albert

  • Copy output type from client 000?

    How can I copy output types from client 000?
    Sincerely,
    Ketan

    Hello Ketan
    What do you mean with output types??, is it a data element?, a parameter? Im lost!!
    Hope I can help you with any ideas....
    Bye
    Gabriel P-

  • I uploaded and edited my RAW image, clicked 'Save As', and changed the file type from .psed to .jpg.

    I edited my raw image in Photoshop CS6, selected 'Save As', and changed the file type from .psed to .jpg. I also selected 12 and large file when the window popped up, concluding my 'saving as'. My computer does not recognize the file type and won't open them. Can someone help me? Thanks!

    When naming files, stick to the letters of the ENGLISH alphabet, numbers and underscores.  Do not use illegal characters like apostrophes, commas, asterisks, ampersands, hatch or pound signs, diacritics or accented characters, slashes, etc.
    While the period (dot) is not an illegal character per se, your file names should have only one period and that should always be followed by the file type extension.
    EDITED typo: se
    Message was edited by: station_two

  • Trying to change my NAT type from Open to Strict or Moderate.

    My NAT type is open but I can't get any games. I told my friend and he said try and change my NAT type from Open to Strict, and that it might help in joining games. I can join CoD4 games, but not MW2 or MW3 games. Can anyone help me? I am playing on XBOX360 and I use wireless internet.

    A known issue with Linksys routers is the NAT Type 3 or anything related to dropping of Internet connectivity during play time.  Network Address Translation (NAT) is the ability of a router or firewall to translate a public IP address to a private IP address and vice versa.  It adds security to the network by keeping the private IP addresses hidden from the outside world.
    Here is the link, which will you in resolving the concern:  http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=2902de6218ed4dc1a4c595595ca1f60a_Resolving_NAT_Typ...

  • User exit to change an output type

    Hi,
    Is there any user exit to change the output type instead of another one when the user tries to print a sales order?
    Thanks in advance.
    Ricard.

    Hello,
    for example you have 2 message types
    1) ZOUT1  (Zprogram1 or Scirpt or Smartform what ever)
    2) ZOUT2  (Zprogram2 or Scirpt or Smartform what ever).
    For example based on Vendor Type you want to trigger ZOUT1 & ZOUT2.
    what you have to do is.
    Goto VOFM  -> Requirements -> Output Control -> Create 2 routines for each output type. then go to Code part of each routine make subrc = 4 if you dont want to execute output type.
    subrc = 0 implies output will execute else vise versa.
    let me know if you dont understand my solution.
    ***********Poorna***********

  • I'd like to change my latency type from Interleavi...

    I would like to change my latency type from Interleaving to Fast. How would I go about doing so/who do I contact.
    I have checked previous threads, but old links on such threads do not work anymore.
    Solved!
    Go to Solution.

    Thanks for the quick reply. Things make more sense now. I read up about the DLM and yes apprently it must have changed it over around the time I had a lot of visitors with their laptops and what not. This is just an educated guess here but a lot of resetting of the router went on during their visits, at least once or twice a day for a while now and it's possible THAT is what made the change of the latency setting.
    It may be fine if I just advise everyone to not touch it at all and it will change back in a period of time. But just to check because I do know myself that the line and connection was pretty stable even before all this, with a lot better latency (which is what I want the most). Is it possible to force change it back? Thank you.

  • Hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me :)

    hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me

    You will have to configure that with your router. Type your router's IP address in the search/domain bar and allow port forwarding.
    What is requiring you to have an open NAT? That issue is usually for gaming consoles, etc.

  • Changing an output type for SmartForms

    Hi all,
    I have a picklist that I changed from SAPScript to SmartForm.  I am trying to edit the output type EK00 to use the SmartForm.  I am using V/38 to edit EK00 but I can't figure out the right properties.  Right now I have the FM name (/1BCDWB/SF00000017) as the Layout Module, the SmartForm name (ZPCC_PICKLST_STD) as the SmartForm.  Also, under Pricessing 1, I have the print program (ZRVADEK01), FORM routine as (SMARTFORM_PRINT) and Form as (ZPCC_PICKLST_STD).  Is there anything else that I need to change?  When I try to use EK00 it is still looking for a SAPScript instead of a SmartForm.
    Regards,
    Davis

    Matt, thanks for the reply.  I just tried what you posted and it still gives me an error.  I get a popup that says "WRITE_FORM is invalid, OPEN_FORM is missing.
    Could my problem be that the old SAPScript and the new SmartForm have the same name?  Below is the configuration:
    Layout Module:  <b>nothing there</b>
    SmartForm:  <b>ZPCC_PICKLST_STD</b> (name of the smartform)
    Processing 1:
    Program: <b>ZRVADEK01</b>
    FORM routine: <b>SMARTFORM_PRINT</b>
    Regards,
    Davis
    EDIT:  I do not have any SAPScript functions (open_form, close_form, etc...) in the print program.  I took the preconfigured print program for SDPIK_L (preconfigured picklist) and added our custom logic.
    Message was edited by:
            Davis

  • Create IDOC by output type from delivery

    Hello,
    I have an output type that comes out by a delivery, what I create this delivery from any plant
    beside a new one, the output is created and sent as it should be to the XI as an IDOC,
    But when I'm trying to do so from a new plant that was created here, this output is not created.
    Do anyone know if there is any link between an output type and a plant (werks) ?
    Thank you,
    Kind Regards,
    Amit Berku

    hi,
    >>>Do anyone know if there is any link between an output type and a plant (werks) ?
    I don't think so - as plant it always on line level in the delivery
    and access sequence usually works only on header fields
    but there might be a custom made requirement attached to your output type
    which checks the plant - this is for sure possible
    but it's pretty easy to check in TCODE NACE and access sequence can be checked
    from the delivery - header output tab
    Regards,
    Michal Krawczyk

  • Blocking Output types from Triggering.

    Client has a requirement that if overall credit status of delivery is 'B' ( Blocked ) then all output types Automatic or Manual associated with the delivery should be blocked.
    I added following lines of code in requirements for all output types associated with deliveries
      IF   KOMKBV2-CMGST CA 'B'.
        SY-SUBRC = 4.
        EXIT.
      ENDIF.
    But we are still able to attach output types to deliveries with credit status blocked, any pointers ?

    hi Saket,
    This can be the issue you are facing.
    you are exiting from the current event with the 'EXIT' statment, but the validation is not applicable in the subsequent event.
    in the subsequent event, may be 'END-OF-SELECTION',
    insert the following statement, as the first statement:
    CHECK NOT KOMKBV2-CMGST EQ 'B'.
    hope this helps

  • Can't change incomming mailbox type from POP3 to I...

    On my E71, I configured e-mail for my ISP in Messaging.  The configuration was straight forward, and it worked.
    The ISP now supports IMAP.  If I try and change the incomming mail connection mailbox type from POP3 to IMAP, I get an error "Unable to edit mailbox type once selected.  Define new mailbox".
    So I completely delete the ISP mail entry from Messaging, and then tried to re-create it.  When I do this, it automatically fills in the information for me (it remembers the name of the POP server, credentials, etc.) if I use the same e-mail address.
    How do I clear this saved information completely so that I can set up the mail?  I don't want to have to blow everything away.
    Thanks,
    Robert

    Hi I have same problem... I thought I would be clever and use an invalid service provider and it did fire up manual entry so I added IMAP configuration... fine. BUT when it connected it still went to a POP account!
    Looks like this it not being "remembered" but the wizard simply thinks it knows best and uses its own config!!!
    You CAN use Nokia messaging (push email) but for me its pointless and means you have to inboxes on the go for the same account
    Looks like the wizard needs updating...
    BTW disabled PO3 at the service provider also.. does not help

  • Calling output types from BAPI

    Dear All,
    I am creating PO using IDOC.
    A function module is used for creating PO from IDOC.
    The moment PO is created SO should also get created.For that i have used OUTPUT type and connected output type to
    application EF.
    can anybody guide me if routine for SO creation ie output type for SO will get triggered from BAPI/Function module for postiing PO application?
    thanks.

    Hello,
    The PDF Files of the Output are stored onto the spool. To retrieve these documents you will need some custom development both on the Java and ABAP stack.
    ABAP : Refer to this link: http://wiki.sdn.sap.com/wiki/display/ABAP/GettingSpoolRequestNumberfortheOutput+type
    Java:
    1. Put up a link on a JSP where you want to show the download option for the output type.
    2. Develop custom action, bo, backend objects
    3. Call a custom RFC in the SAP system from backend class which retrieves the PDF document based on the above link.
    4. Return PDF doc back to Java as a byte stream.
    5. Provide option to save/open  on the client.
    Hope this helps.
    Pradeep

Maybe you are looking for