Change of ratio from 4 x 3 to 16 x 9 wide screen..

Change of ratio from 4 x 3 to 16 x 9 wide screen.. in FCX pro
Can anybody please help me, who has prior knowledge of changing the ratio from 4 x 3 to 16.9 widescreen that I have already imported.. I have tried everything in the preferences.. Before I imported it, and after, however it is not working. It’s been imported from a FlashCARD… Thank you in anticipation

Hello once again Tom, sorry for the inconvenience, I'm quite new to this Final Cut Pro as you can tell. However here is information you requested I hope I got it right for you.
I will do my best to explain as I go on. I'm using a Canon XL2 broadcast camera which is capable of shooting in 9 x 6 and 4 x 3. It is a DV tape camera and additional to that I have on the back a datavideo (DN 60) flash card recorder. I do believe that the flash card recorder records in 16 x 9, so I am told by the distributors. I'm also told by the same distributors that for some reason Final Cut Pro X does not recognise the 16 x 9 flag, however Adobe, Sony Vegas etc they do recognise it and allow you to change the ratio size in their software. When I use the tape from the camera it exports into Final Cut Pro X as 16 x 9, so I will thought that the flash card recorder would record in the same format.
I can tell by the size of the clip in the viewfinder that it is not 16 x 9 when I import it in, I also make a quick 10 second movie and set that as my master file, no matter what I use to import it in the preferences it still won't stretch to widescreen, or in fact anything else I do as I send it to a master file, anything else than this I am at a loss, not sure what to do. I hope the picture of the move inspector is what you require also including the picture to let you see the size in reference.

Similar Messages

Changing aspect ratio from 4:3 to 16:9

I import with Firewire and Canopus ADVC100 from a Digital-TV-Recorder.
The imported footage comes up in FCPX Events in 4:3 - but should be 16:9 - as it was boradcasted. Is there a way to change this?
I'm new with the program - before i did the same thing in iMovie-Hd, and there it worked fine. Comes up there in 16:9 in the program when choosing Widescreen setting, however i see the files in the media folder as 4:3, so also these files, when putting them into FCPX stay as they are of course.
Thanks a lot for helping a beginner.....

Click on your clip in the Event Manager and then go to the Inspector, in the Info tab. You should have a "Anamorphic Override" option. Set it to "Widescreen".

Changing aspect ratio from 16.9 FHA to 16.9 letterbox

I am editing a 4x3 project and I need to use some 16.9 clips. The 16.9 clip is FHA. Is there any way I can squeeze it to 16.9 letterbox and save it as a 4x3 clip ? I'm using the latest version of iMovie 09.

If you want to see the complete image (with black bars top and bottom) nest the 16:9 image into a 4:3 sequence.
If you want to see just a part of the image in your 4:3 sequence, there are a few different ways to do it, but essentially the scenario is that you will be scaling up the image (somewhere around 132% works well.)
If it's the same portion of the image that you want throughout the sequence, the quickest thing to do is nest your 16:9 cut into a 4:3 sequence, right click (ctrl+click) on the clip and select open in viewer, then go to the motion tab and scale the clip up to 132%
Josh

Can I change a banner from the top to the bottom of the screen?

It is extremely annoying when a banner drops down when you are using commands at the top of the page; very few commands are at the bottom of the screen. To me this is a NEGATIVE against the iPhone and Apple should have seen this from the beginning !!

Submit your feedback requesting this feature directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

CS4 changing aspect ratio, resizing video

Hello,
I've been working on a project at school for some time and am just now getting to the editing factor. My issue is about half way through editing it seems that its changed the aspect ratio from wide screen to a more standard ratio. I have it set to scale to the frame size. Just to clear a few things up they were all captured the same, all the original quicktime files are the same it's just once I import them into premiere that I start having issues. I really appreciate it, thanks

After uploading it to youtube the size gets so small you can hardly see it. My main goal with this thread is to get the video to actually scale to the frame.

ITunes changing aspect ratio of recorded TV shows

I use Elgato's EyeTV to record TV programmes, and their Turbo264 plug-in to encode for the Apple TV. All the programmes added to my iTunes library are suddenly appearing with the aspect ratio of 1456*576.
I am certain that this is an iTunes problem rather than an Elgato problem because:
1) If you look at the file properties in Finder the files are the correct aspect ratio of 1024*576
2) I recorded an entire series in December and watched the first two, which displayed correctly, but appear to have become retrospectively stretched.

Hi Richard,
sounds like you are suffering from the same sort of issue I am;
http://discussions.apple.com/thread.jspa?threadID=1377284&tstart=0
Played-back programmes are ending up extremely letterboxed through iTunes and if they weren't wide-screen to start with they appear as a window in centre screen.
The weird thing is if you open the iTunes library files using Quicktime you will find they display in the same strange way until you change a couple of playback settings. Then they appear perfectly.
It would seem that you can't make the same playback setting changes in iTunes.

Changing Aspect Ratio Question?

I have just unwrapped and installed my new apple TV. Setup was the usual Apple synch
However I've found someting tat is rather iritating and wanted to ask if someone can help me.
When looking at the apple TV menue's etc the aspect ratio looks perfect on my 55" wide screen TV. and on my normal TV the current aspect ratio setting of the TV seems to work OK. I think I have it set to 16:9
However when I either play a netflix movie or play a movie from my itunes library the picture doesnt fit and loks more like a 4:3 with black bars down the sides. I can stretch it out and it loks OK, but its very inconveniant to keep reseting the aspect ratio of my TV setup every time I use apple TV.
BTW.. When I use the Wii to stream netflix it fits perfectly.
I dont see a menu setting in apple TV to change aspect raitio..
Can anyone help?
Thanks,
Steve

There isn't one. Its output is designed purely for 16:9 widescreen TVs. Any adjustments thereafter must be made on the TV.
If videos display incorrectly either the TV aspect ratio is wrong, TV is not widescreen, the stream (Netflix) is wrong or the local video file is wrongly encoded. Of course if it's a 4:3 film or TV show then it will display as intended with black bars on sides on a widescreen TV.
When you say normal TV you presumably mean a non-widescreen TV? AppleTV is not designed to output to 4:3 sets hence no onboard adjustments.
AC

Netflix would change aspect ratio 30 seconds into the video.

I'm having an issue with Netflix video streaming changing the aspect ratio from wide format to standard within 30 seconds into the video. Doesn't happen on the sony PS3, macbook air, ipad2. Any suggestions? Thanks in advance.
Before:
30 Seconds into the show

This same thing is happening to me - AppleTV switches to 4:3 ratio 30 seconds into a movie. Then, when I try to start the video from the beginning, it then starts incorrectly (with black bars on the side and a compressed picture). I have the ATV2 connected to a brand new Samsung 32" LCD in my bedroom. This only happens when Netflix is playing on the ATV, and it happens even if I hook it up to one of my other televisions. This leads me to believe that the problem is with the ATV, not my television. The strange thing is that it was working fine for a couple of days, and then suddenly started doing this.

Can you 'force" change aspect ratio for DVD player 4.0?

Hi,
I have burnt a dvd-r from my pioneer hdd/dvd recorder (630H). The program is in 16:9 ratio but plays at 4:3 on my powerbook dvd player 4. (All other dvd-r burnt via other burners appear OK however - so I guess this is something peculiar to the Pioneer) Why is this?. Question is: is there any way to "force" the apple dvd player to change aspect ratios? Thanks for any assistance.

I've got about 20 video tracks and one audio track all laid out and I've decided I'd like to insert something before the audio track so if I move the audio track everything else will be off. Is there a way to shift all the video tracks and the audio track over to the right to make room for the inserted video?

Batch Change Crop Ratio Only?

I just went through a whole folder full of images cropping them to focus on the subject. When nearly done, I realized that all along I'd been cropping to a 5x7 ratio instead of the 4x6 ratio I'm supposed to use. Is there any way I can lift/stamp this change? The lift/stamp tool applies the absolute x/y crop dimensions from one picture to the next, but I just want it to change the ratio, not the actual position or size of the crop rectangle. Am I out of luck here?

JJakucyk wrote:
...I just want it to change the ratio, not the actual position or size of the crop rectangle. Am I out of luck here?
Yes you are out of luck, because the change from 5x7 to 4x6 by definition does change the position and size of the crop rectangle.
Sorry.
-Allen Wicks

Change cpu ratio?

Anyone seen where the "adjust cpu frequency" is greyed out, tried several options but unable to change it. Any thoughts?
OC genie if it works, but I want to manually change the ratio and cpu voltage
msi mpower max AC is the motherboard

Quote from: donpower on 01-March-14, 23:18:36
hello. thanks for the replies .. well I have two options in fixed mode and no low frequencies in dynamic mode if drops to 800 mhz. I leave it in dynamic mode?
only it in dynamic mode is enabled EIST
At 43X, Turbo OC Method, all my settings are on Auto. If Dynamic Mode with your OC is allowing power saving feature to work, then recommend to stay with it or set it to Auto unless it affects the stability of the system when set to Auto.

My daughter has just changed her phone from an iphone to a nokia but when i send her a message it still comes up as an i message and she doesnt receive it?

my daughter has changed her phone from an iphone to a nokia but kept the same number but when i send her a message from my iphone it still comes up as an i messsage and she doesnt receive it can anybody tell me how to fix this please

She needs to remove that device from the iMessage database, or if she still has the phone, she can go into Settings, Messages and turn off iMessage. If she still has the phone, she just needs to put the SIM back in for a couple of minutes to turn that off.
If she does not have the phone any more, she will need to go to her Support Profile, if she registered the phone and delete the phone from the profile.

Why am I unable to change text color from black in LR5 book module?

Why am I unable to change text color from black in LR5 Book Module?

I'm assuming you clicked on the color patch besides the word <Character> to open the color picker window.
At the right side of this window there is a vertical bar that has 2 horizontal black lines at the bottom.
This is actually a slider. Pull it upwards with the color picker and color will appear in the window.

Help reqd on Changing the Valid from "date" for both BOM & Routing

Hi all...
Pls advise me how to do the changing of Valid from "date"....
Is there any process in CC01 or ECM???....
pls reply me in detail step format (step by step analysis)....
I wrongly created in CS01 and CA01 as 05.10.2007 as my valid from date instead of 01.10.2007.....
How to change to my actual one......
I dont know how to change it exactly.....as im beginner in SAP...pls take this into consideration...and post ur replies imm.
Pls reply me in detail....will be rewarded at the end while closing this issue.
thanks & regards
sankar

Dear Sankarbabu,
IF there's no setting for Date Check in OS54 - Engineering Change Management
Control Data,then you can create a change number with past dates,and also to
use the same one for changing BOM.
Tell me one thing you are saying you want to use ECM.Was the earlier one
created without BOM was created without an ECN?
See already if you have created your BOM with an ECN,then remove the date
check setting which I have mentioned in OS54.
Now goto T code CC02 ,enter the Change number and give the valid from date as
01.10.2007.
After that check in CS03 whether this date(01.10.2007)is getting reflected or not.
I'm sure this will solve your problem.
Regards
Mangal

Not able to change sales stage from requirtement to reqmt analysis

in opportunity Not able to change sales stage from requirtement to reqmt analysis
Error Message:SBL-DAT-00284
Details error msg is:
Unable to evaluate workflow rule for foll reason
Update probability between 0 & 100%(SBL-ODS-00500)
Edited by: user1074008 on Sep 22, 2010 10:17 PM
Edited by: user1074008 on Sep 22, 2010 10:18 PM

Looks like a bug...
Previos Post Activity Status = Submitted - Access Denied

Change of ratio from 4 x 3 to 16 x 9 wide screen..

Similar Messages

Maybe you are looking for